6 files changed, 20 insertions, 15 deletions

diff --git a/drivers/clk/ti/clkt_dpll.c b/drivers/clk/ti/clkt_dpll.c
index 87ece6cd4226..dfaa4d1f0b64 100644
--- a/drivers/clk/ti/clkt_dpll.c
+++ b/drivers/clk/ti/clkt_dpll.c
@@ -269,8 +269,9 @@ unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk)
 
 /**
  * omap2_dpll_round_rate - round a target rate for an OMAP DPLL
- * @clk: struct clk * for a DPLL
+ * @hw: struct clk_hw containing the struct clk * for a DPLL
  * @target_rate: desired DPLL clock rate
+ * @parent_rate: parent's DPLL clock rate
  *
  * Given a DPLL and a desired target rate, round the target rate to a
  * possible, programmable rate for this DPLL.  Attempts to select the
diff --git a/drivers/clk/ti/clockdomain.c b/drivers/clk/ti/clockdomain.c
index 700b7f44f671..74831b2752b3 100644
--- a/drivers/clk/ti/clockdomain.c
+++ b/drivers/clk/ti/clockdomain.c
@@ -97,7 +97,7 @@ void omap2_clkops_disable_clkdm(struct clk_hw *hw)
 
 /**
  * omap2_init_clk_clkdm - look up a clockdomain name, store pointer in clk
- * @clk: OMAP clock struct ptr to use
+ * @hw: Pointer to clk_hw_omap used to obtain OMAP clock struct ptr to use
  *
  * Convert a clockdomain name stored in a struct clk 'clk' into a
  * clockdomain pointer, and save it into the struct clk.  Intended to be
diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c
index 247510e306e2..d6f1ac5b53e1 100644
--- a/drivers/clk/ti/dpll.c
+++ b/drivers/clk/ti/dpll.c
@@ -151,7 +151,7 @@ static const struct clk_ops dpll_x2_ck_ops = {
 
 /**
  * _register_dpll - low level registration of a DPLL clock
- * @hw: hardware clock definition for the clock
+ * @user: pointer to the hardware clock definition for the clock
  * @node: device node for the clock
  *
  * Finalizes DPLL registration process. In case a failure (clk-ref or
diff --git a/drivers/clk/ti/dpll3xxx.c b/drivers/clk/ti/dpll3xxx.c
index 2490026948b4..6097b099a5df 100644
--- a/drivers/clk/ti/dpll3xxx.c
+++ b/drivers/clk/ti/dpll3xxx.c
@@ -125,7 +125,7 @@ static u16 _omap3_dpll_compute_freqsel(struct clk_hw_omap *clk, u8 n)
 	return f;
 }
 
-/*
+/**
  * _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness
  * @clk: pointer to a DPLL struct clk
  *
@@ -168,7 +168,7 @@ done:
 	return r;
 }
 
-/*
+/**
  * _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
  * @clk: pointer to a DPLL struct clk
  *
@@ -204,7 +204,7 @@ static int _omap3_noncore_dpll_bypass(struct clk_hw_omap *clk)
 	return r;
 }
 
-/*
+/**
  * _omap3_noncore_dpll_stop - instruct a DPLL to stop
  * @clk: pointer to a DPLL struct clk
  *
@@ -291,7 +291,7 @@ static void _lookup_sddiv(struct clk_hw_omap *clk, u8 *sd_div, u16 m, u8 n)
 	*sd_div = sd;
 }
 
-/*
+/**
  * _omap3_noncore_dpll_program - set non-core DPLL M,N values directly
  * @clk:	struct clk * of DPLL to set
  * @freqsel:	FREQSEL value to set
@@ -406,7 +406,8 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
 
 /**
  * omap3_dpll_recalc - recalculate DPLL rate
- * @clk: DPLL struct clk
+ * @hw: struct clk_hw containing the DPLL struct clk
+ * @parent_rate: clock rate of the DPLL parent
  *
  * Recalculate and propagate the DPLL rate.
  */
@@ -421,7 +422,7 @@ unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate)
 
 /**
  * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
- * @clk: pointer to a DPLL struct clk
+ * @hw: struct clk_hw containing then pointer to a DPLL struct clk
  *
  * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock.
  * The choice of modes depends on the DPLL's programmed rate: if it is
@@ -470,7 +471,7 @@ int omap3_noncore_dpll_enable(struct clk_hw *hw)
 
 /**
  * omap3_noncore_dpll_disable - instruct a DPLL to enter low-power stop
- * @clk: pointer to a DPLL struct clk
+ * @hw: struct clk_hw containing then pointer to a DPLL struct clk
  *
  * Instructs a non-CORE DPLL to enter low-power stop.  This function is
  * intended for use in struct clkops.  No return value.
@@ -745,7 +746,8 @@ static struct clk_hw_omap *omap3_find_clkoutx2_dpll(struct clk_hw *hw)
 
 /**
  * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
- * @clk: DPLL output struct clk
+ * @hw: pointer  struct clk_hw
+ * @parent_rate: clock rate of the DPLL parent
  *
  * Using parent clock DPLL data, look up DPLL state.  If locked, set our
  * rate to the dpll_clk * 2; otherwise, just use dpll_clk.
@@ -913,7 +915,7 @@ const struct clk_hw_omap_ops clkhwops_omap3_dpll = {
  * omap3_dpll4_set_rate - set rate for omap3 per-dpll
  * @hw: clock to change
  * @rate: target rate for clock
- * @parent_rate: rate of the parent clock
+ * @parent_rate: clock rate of the DPLL parent
  *
  * Check if the current SoC supports the per-dpll reprogram operation
  * or not, and then do the rate change if supported. Returns -EINVAL
diff --git a/drivers/clk/ti/dpll44xx.c b/drivers/clk/ti/dpll44xx.c
index 89c3ed1a24b8..3fc2cab69a3f 100644
--- a/drivers/clk/ti/dpll44xx.c
+++ b/drivers/clk/ti/dpll44xx.c
@@ -102,7 +102,8 @@ static void omap4_dpll_lpmode_recalc(struct dpll_data *dd)
 
 /**
  * omap4_dpll_regm4xen_recalc - compute DPLL rate, considering REGM4XEN bit
- * @clk: struct clk * of the DPLL to compute the rate for
+ * @hw: pointer to the clock to compute the rate for
+ * @parent_rate: clock rate of the DPLL parent
  *
  * Compute the output rate for the OMAP4 DPLL represented by @clk.
  * Takes the REGM4XEN bit into consideration, which is needed for the
@@ -134,8 +135,9 @@ unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
 
 /**
  * omap4_dpll_regm4xen_round_rate - round DPLL rate, considering REGM4XEN bit
- * @clk: struct clk * of the DPLL to round a rate for
+ * @hw: struct hw_clk containing the struct clk * of the DPLL to round a rate for
  * @target_rate: the desired rate of the DPLL
+ * @parent_rate: clock rate of the DPLL parent
  *
  * Compute the rate that would be programmed into the DPLL hardware
  * for @clk if set_rate() were to be provided with the rate
diff --git a/drivers/clk/ti/gate.c b/drivers/clk/ti/gate.c
index 42389558418c..b1d0fdb40a75 100644
--- a/drivers/clk/ti/gate.c
+++ b/drivers/clk/ti/gate.c
@@ -55,7 +55,7 @@ static const struct clk_ops omap_gate_clk_hsdiv_restore_ops = {
 /**
  * omap36xx_gate_clk_enable_with_hsdiv_restore - enable clocks suffering
  *         from HSDivider PWRDN problem Implements Errata ID: i556.
- * @clk: DPLL output struct clk
+ * @hw: DPLL output struct clk_hw
  *
  * 3630 only: dpll3_m3_ck, dpll4_m2_ck, dpll4_m3_ck, dpll4_m4_ck,
  * dpll4_m5_ck & dpll4_m6_ck dividers gets loaded with reset