diff options
Diffstat (limited to 'drivers/input/touchscreen/goodix.c')
| -rw-r--r-- | drivers/input/touchscreen/goodix.c | 158 |
1 files changed, 149 insertions, 9 deletions
diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index b5cc91788195..a3bfc7a41679 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -102,6 +102,7 @@ static const struct goodix_chip_id goodix_chip_ids[] = { { .id = "911", .data = >911_chip_data }, { .id = "9271", .data = >911_chip_data }, { .id = "9110", .data = >911_chip_data }, + { .id = "9111", .data = >911_chip_data }, { .id = "927", .data = >911_chip_data }, { .id = "928", .data = >911_chip_data }, @@ -296,6 +297,108 @@ static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data) return -ENOMSG; } +static struct input_dev *goodix_create_pen_input(struct goodix_ts_data *ts) +{ + struct device *dev = &ts->client->dev; + struct input_dev *input; + + input = devm_input_allocate_device(dev); + if (!input) + return NULL; + + input_alloc_absinfo(input); + if (!input->absinfo) { + input_free_device(input); + return NULL; + } + + input->absinfo[ABS_X] = ts->input_dev->absinfo[ABS_MT_POSITION_X]; + input->absinfo[ABS_Y] = ts->input_dev->absinfo[ABS_MT_POSITION_Y]; + __set_bit(ABS_X, input->absbit); + __set_bit(ABS_Y, input->absbit); + input_set_abs_params(input, ABS_PRESSURE, 0, 255, 0, 0); + + input_set_capability(input, EV_KEY, BTN_TOUCH); + input_set_capability(input, EV_KEY, BTN_TOOL_PEN); + input_set_capability(input, EV_KEY, BTN_STYLUS); + input_set_capability(input, EV_KEY, BTN_STYLUS2); + __set_bit(INPUT_PROP_DIRECT, input->propbit); + /* + * The resolution of these touchscreens is about 10 units/mm, the actual + * resolution does not matter much since we set INPUT_PROP_DIRECT. + * Userspace wants something here though, so just set it to 10 units/mm. + */ + input_abs_set_res(input, ABS_X, 10); + input_abs_set_res(input, ABS_Y, 10); + + input->name = "Goodix Active Pen"; + input->phys = "input/pen"; + input->id.bustype = BUS_I2C; + input->id.vendor = 0x0416; + if (kstrtou16(ts->id, 10, &input->id.product)) + input->id.product = 0x1001; + input->id.version = ts->version; + + if (input_register_device(input) != 0) { + input_free_device(input); + return NULL; + } + + return input; +} + +static void goodix_ts_report_pen_down(struct goodix_ts_data *ts, u8 *data) +{ + int input_x, input_y, input_w; + u8 key_value; + + if (!ts->input_pen) { + ts->input_pen = goodix_create_pen_input(ts); + if (!ts->input_pen) + return; + } + + if (ts->contact_size == 9) { + input_x = get_unaligned_le16(&data[4]); + input_y = get_unaligned_le16(&data[6]); + input_w = get_unaligned_le16(&data[8]); + } else { + input_x = get_unaligned_le16(&data[2]); + input_y = get_unaligned_le16(&data[4]); + input_w = get_unaligned_le16(&data[6]); + } + + touchscreen_report_pos(ts->input_pen, &ts->prop, input_x, input_y, false); + input_report_abs(ts->input_pen, ABS_PRESSURE, input_w); + + input_report_key(ts->input_pen, BTN_TOUCH, 1); + input_report_key(ts->input_pen, BTN_TOOL_PEN, 1); + + if (data[0] & GOODIX_HAVE_KEY) { + key_value = data[1 + ts->contact_size]; + input_report_key(ts->input_pen, BTN_STYLUS, key_value & 0x10); + input_report_key(ts->input_pen, BTN_STYLUS2, key_value & 0x20); + } else { + input_report_key(ts->input_pen, BTN_STYLUS, 0); + input_report_key(ts->input_pen, BTN_STYLUS2, 0); + } + + input_sync(ts->input_pen); +} + +static void goodix_ts_report_pen_up(struct goodix_ts_data *ts) +{ + if (!ts->input_pen) + return; + + input_report_key(ts->input_pen, BTN_TOUCH, 0); + input_report_key(ts->input_pen, BTN_TOOL_PEN, 0); + input_report_key(ts->input_pen, BTN_STYLUS, 0); + input_report_key(ts->input_pen, BTN_STYLUS2, 0); + + input_sync(ts->input_pen); +} + static void goodix_ts_report_touch_8b(struct goodix_ts_data *ts, u8 *coor_data) { int id = coor_data[0] & 0x0F; @@ -326,6 +429,14 @@ static void goodix_ts_report_touch_9b(struct goodix_ts_data *ts, u8 *coor_data) input_report_abs(ts->input_dev, ABS_MT_WIDTH_MAJOR, input_w); } +static void goodix_ts_release_keys(struct goodix_ts_data *ts) +{ + int i; + + for (i = 0; i < GOODIX_MAX_KEYS; i++) + input_report_key(ts->input_dev, ts->keymap[i], 0); +} + static void goodix_ts_report_key(struct goodix_ts_data *ts, u8 *data) { int touch_num; @@ -340,8 +451,7 @@ static void goodix_ts_report_key(struct goodix_ts_data *ts, u8 *data) input_report_key(ts->input_dev, ts->keymap[i], 1); } else { - for (i = 0; i < GOODIX_MAX_KEYS; i++) - input_report_key(ts->input_dev, ts->keymap[i], 0); + goodix_ts_release_keys(ts); } } @@ -363,6 +473,15 @@ static void goodix_process_events(struct goodix_ts_data *ts) if (touch_num < 0) return; + /* The pen being down is always reported as a single touch */ + if (touch_num == 1 && (point_data[1] & 0x80)) { + goodix_ts_report_pen_down(ts, point_data); + goodix_ts_release_keys(ts); + goto sync; /* Release any previously registered touches */ + } else { + goodix_ts_report_pen_up(ts); + } + goodix_ts_report_key(ts, point_data); for (i = 0; i < touch_num; i++) @@ -373,6 +492,7 @@ static void goodix_process_events(struct goodix_ts_data *ts) goodix_ts_report_touch_8b(ts, &point_data[1 + ts->contact_size * i]); +sync: input_mt_sync_frame(ts->input_dev); input_sync(ts->input_dev); } @@ -650,10 +770,16 @@ int goodix_reset_no_int_sync(struct goodix_ts_data *ts) usleep_range(6000, 10000); /* T4: > 5ms */ - /* end select I2C slave addr */ - error = gpiod_direction_input(ts->gpiod_rst); - if (error) - goto error; + /* + * Put the reset pin back in to input / high-impedance mode to save + * power. Only do this in the non ACPI case since some ACPI boards + * don't have a pull-up, so there the reset pin must stay active-high. + */ + if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_GPIO) { + error = gpiod_direction_input(ts->gpiod_rst); + if (error) + goto error; + } return 0; @@ -787,6 +913,14 @@ static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts) return -EINVAL; } + /* + * Normally we put the reset pin in input / high-impedance mode to save + * power. But some x86/ACPI boards don't have a pull-up, so for the ACPI + * case, leave the pin as is. This results in the pin not being touched + * at all on x86/ACPI boards, except when needed for error-recover. + */ + ts->gpiod_rst_flags = GPIOD_ASIS; + return devm_acpi_dev_add_driver_gpios(dev, gpio_mapping); } #else @@ -812,6 +946,12 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts) return -EINVAL; dev = &ts->client->dev; + /* + * By default we request the reset pin as input, leaving it in + * high-impedance when not resetting the controller to save power. + */ + ts->gpiod_rst_flags = GPIOD_IN; + ts->avdd28 = devm_regulator_get(dev, "AVDD28"); if (IS_ERR(ts->avdd28)) { error = PTR_ERR(ts->avdd28); @@ -836,7 +976,7 @@ retry_get_irq_gpio: if (IS_ERR(gpiod)) { error = PTR_ERR(gpiod); if (error != -EPROBE_DEFER) - dev_dbg(dev, "Failed to get %s GPIO: %d\n", + dev_err(dev, "Failed to get %s GPIO: %d\n", GOODIX_GPIO_INT_NAME, error); return error; } @@ -849,11 +989,11 @@ retry_get_irq_gpio: ts->gpiod_int = gpiod; /* Get the reset line GPIO pin number */ - gpiod = devm_gpiod_get_optional(dev, GOODIX_GPIO_RST_NAME, GPIOD_IN); + gpiod = devm_gpiod_get_optional(dev, GOODIX_GPIO_RST_NAME, ts->gpiod_rst_flags); if (IS_ERR(gpiod)) { error = PTR_ERR(gpiod); if (error != -EPROBE_DEFER) - dev_dbg(dev, "Failed to get %s GPIO: %d\n", + dev_err(dev, "Failed to get %s GPIO: %d\n", GOODIX_GPIO_RST_NAME, error); return error; } |