diff options
Diffstat (limited to 'drivers/pinctrl')
| -rw-r--r-- | drivers/pinctrl/core.c | 1 | ||||
| -rw-r--r-- | drivers/pinctrl/pinctrl-amd.c | 36 | ||||
| -rw-r--r-- | drivers/pinctrl/qcom/pinctrl-msm.c | 36 |
3 files changed, 47 insertions, 26 deletions
diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c index d6e6c751255f..401886c81344 100644 --- a/drivers/pinctrl/core.c +++ b/drivers/pinctrl/core.c @@ -30,7 +30,6 @@ #ifdef CONFIG_GPIOLIB #include "../gpio/gpiolib.h" -#include <asm-generic/gpio.h> #endif #include "core.h" diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c index 609821b756c2..9236a132c7ba 100644 --- a/drivers/pinctrl/pinctrl-amd.c +++ b/drivers/pinctrl/pinctrl-amd.c @@ -872,34 +872,32 @@ static const struct pinconf_ops amd_pinconf_ops = { .pin_config_group_set = amd_pinconf_group_set, }; -static void amd_gpio_irq_init_pin(struct amd_gpio *gpio_dev, int pin) +static void amd_gpio_irq_init(struct amd_gpio *gpio_dev) { - const struct pin_desc *pd; + struct pinctrl_desc *desc = gpio_dev->pctrl->desc; unsigned long flags; u32 pin_reg, mask; + int i; mask = BIT(WAKE_CNTRL_OFF_S0I3) | BIT(WAKE_CNTRL_OFF_S3) | BIT(INTERRUPT_MASK_OFF) | BIT(INTERRUPT_ENABLE_OFF) | BIT(WAKE_CNTRL_OFF_S4); - pd = pin_desc_get(gpio_dev->pctrl, pin); - if (!pd) - return; + for (i = 0; i < desc->npins; i++) { + int pin = desc->pins[i].number; + const struct pin_desc *pd = pin_desc_get(gpio_dev->pctrl, pin); - raw_spin_lock_irqsave(&gpio_dev->lock, flags); - pin_reg = readl(gpio_dev->base + pin * 4); - pin_reg &= ~mask; - writel(pin_reg, gpio_dev->base + pin * 4); - raw_spin_unlock_irqrestore(&gpio_dev->lock, flags); -} + if (!pd) + continue; -static void amd_gpio_irq_init(struct amd_gpio *gpio_dev) -{ - struct pinctrl_desc *desc = gpio_dev->pctrl->desc; - int i; + raw_spin_lock_irqsave(&gpio_dev->lock, flags); - for (i = 0; i < desc->npins; i++) - amd_gpio_irq_init_pin(gpio_dev, i); + pin_reg = readl(gpio_dev->base + i * 4); + pin_reg &= ~mask; + writel(pin_reg, gpio_dev->base + i * 4); + + raw_spin_unlock_irqrestore(&gpio_dev->lock, flags); + } } #ifdef CONFIG_PM_SLEEP @@ -952,10 +950,8 @@ static int amd_gpio_resume(struct device *dev) for (i = 0; i < desc->npins; i++) { int pin = desc->pins[i].number; - if (!amd_gpio_should_save(gpio_dev, pin)) { - amd_gpio_irq_init_pin(gpio_dev, pin); + if (!amd_gpio_should_save(gpio_dev, pin)) continue; - } raw_spin_lock_irqsave(&gpio_dev->lock, flags); gpio_dev->saved_regs[i] |= readl(gpio_dev->base + pin * 4) & PIN_IRQ_PENDING; diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c index daeb79a9a602..4515f375c5e8 100644 --- a/drivers/pinctrl/qcom/pinctrl-msm.c +++ b/drivers/pinctrl/qcom/pinctrl-msm.c @@ -323,6 +323,7 @@ static int msm_config_reg(struct msm_pinctrl *pctrl, break; case PIN_CONFIG_OUTPUT: case PIN_CONFIG_INPUT_ENABLE: + case PIN_CONFIG_OUTPUT_ENABLE: *bit = g->oe_bit; *mask = 1; break; @@ -414,11 +415,9 @@ static int msm_config_group_get(struct pinctrl_dev *pctldev, val = msm_readl_io(pctrl, g); arg = !!(val & BIT(g->in_bit)); break; - case PIN_CONFIG_INPUT_ENABLE: - /* Pin is output */ - if (arg) + case PIN_CONFIG_OUTPUT_ENABLE: + if (!arg) return -EINVAL; - arg = 1; break; default: return -ENOTSUPP; @@ -502,9 +501,36 @@ static int msm_config_group_set(struct pinctrl_dev *pctldev, arg = 1; break; case PIN_CONFIG_INPUT_ENABLE: - /* disable output */ + /* + * According to pinctrl documentation this should + * actually be a no-op. + * + * The docs are explicit that "this does not affect + * the pin's ability to drive output" but what we do + * here is to modify the output enable bit. Thus, to + * follow the docs we should remove that. + * + * The docs say that we should enable any relevant + * input buffer, but TLMM there is no input buffer that + * can be enabled/disabled. It's always on. + * + * The points above, explain why this _should_ be a + * no-op. However, for historical reasons and to + * support old device trees, we'll violate the docs + * still affect the output. + * + * It should further be noted that this old historical + * behavior actually overrides arg to 0. That means + * that "input-enable" and "input-disable" in a device + * tree would _both_ disable the output. We'll + * continue to preserve this behavior as well since + * we have no other use for this attribute. + */ arg = 0; break; + case PIN_CONFIG_OUTPUT_ENABLE: + arg = !!arg; + break; default: dev_err(pctrl->dev, "Unsupported config parameter: %x\n", param); |