1 files changed, 19 insertions, 16 deletions

diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index c3cdd00ddc41..e8bc42f92e79 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -76,7 +76,6 @@ struct edgeport_uart_buf_desc {
 #define EDGE_READ_URB_STOPPING	1
 #define EDGE_READ_URB_STOPPED	2
 
-#define EDGE_LOW_LATENCY	1
 #define EDGE_CLOSING_WAIT	4000	/* in .01 sec */
 
 #define EDGE_OUT_BUF_SIZE	1024
@@ -103,7 +102,7 @@ struct edgeport_port {
 	__u8 shadow_mcr;
 	__u8 shadow_lsr;
 	__u8 lsr_mask;
-	__u32 ump_read_timeout;		/* Number of miliseconds the UMP will
+	__u32 ump_read_timeout;		/* Number of milliseconds the UMP will
 					   wait without data before completing
 					   a read short */
 	int baud_rate;
@@ -232,7 +231,6 @@ static unsigned short OperationalBuildNumber;
 
 static int debug;
 
-static int low_latency = EDGE_LOW_LATENCY;
 static int closing_wait = EDGE_CLOSING_WAIT;
 static int ignore_cpu_rev;
 static int default_uart_mode;		/* RS232 */
@@ -1850,9 +1848,6 @@ static int edge_open(struct tty_struct *tty,
 	if (edge_port == NULL)
 		return -ENODEV;
 
-	if (tty)
-		tty->low_latency = low_latency;
-
 	port_number = port->number - port->serial->minor;
 	switch (port_number) {
 	case 0:
@@ -2014,8 +2009,7 @@ release_es_lock:
 	return status;
 }
 
-static void edge_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void edge_close(struct usb_serial_port *port)
 {
 	struct edgeport_serial *edge_serial;
 	struct edgeport_port *edge_port;
@@ -2669,7 +2663,7 @@ cleanup:
 	return -ENOMEM;
 }
 
-static void edge_shutdown(struct usb_serial *serial)
+static void edge_disconnect(struct usb_serial *serial)
 {
 	int i;
 	struct edgeport_port *edge_port;
@@ -2679,12 +2673,22 @@ static void edge_shutdown(struct usb_serial *serial)
 	for (i = 0; i < serial->num_ports; ++i) {
 		edge_port = usb_get_serial_port_data(serial->port[i]);
 		edge_remove_sysfs_attrs(edge_port->port);
+	}
+}
+
+static void edge_release(struct usb_serial *serial)
+{
+	int i;
+	struct edgeport_port *edge_port;
+
+	dbg("%s", __func__);
+
+	for (i = 0; i < serial->num_ports; ++i) {
+		edge_port = usb_get_serial_port_data(serial->port[i]);
 		edge_buf_free(edge_port->ep_out_buf);
 		kfree(edge_port);
-		usb_set_serial_port_data(serial->port[i], NULL);
 	}
 	kfree(usb_get_serial_data(serial));
-	usb_set_serial_data(serial, NULL);
 }
 
 
@@ -2921,7 +2925,8 @@ static struct usb_serial_driver edgeport_1port_device = {
 	.throttle		= edge_throttle,
 	.unthrottle		= edge_unthrottle,
 	.attach			= edge_startup,
-	.shutdown		= edge_shutdown,
+	.disconnect		= edge_disconnect,
+	.release		= edge_release,
 	.port_probe		= edge_create_sysfs_attrs,
 	.ioctl			= edge_ioctl,
 	.set_termios		= edge_set_termios,
@@ -2950,7 +2955,8 @@ static struct usb_serial_driver edgeport_2port_device = {
 	.throttle		= edge_throttle,
 	.unthrottle		= edge_unthrottle,
 	.attach			= edge_startup,
-	.shutdown		= edge_shutdown,
+	.disconnect		= edge_disconnect,
+	.release		= edge_release,
 	.port_probe		= edge_create_sysfs_attrs,
 	.ioctl			= edge_ioctl,
 	.set_termios		= edge_set_termios,
@@ -3008,9 +3014,6 @@ MODULE_FIRMWARE("edgeport/down3.bin");
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Debug enabled or not");
 
-module_param(low_latency, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(low_latency, "Low latency enabled or not");
-
 module_param(closing_wait, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(closing_wait, "Maximum wait for data to drain, in .01 secs");