| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP cross-CPU function-call updates from Ingo Molnar:
- Remove diagnostics and adjust config for CSD lock diagnostics
- Add a generic IPI-sending tracepoint, as currently there's no easy
way to instrument IPI origins: it's arch dependent and for some major
architectures it's not even consistently available.
* tag 'smp-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
trace,smp: Trace all smp_function_call*() invocations
trace: Add trace_ipi_send_cpu()
sched, smp: Trace smp callback causing an IPI
smp: reword smp call IPI comment
treewide: Trace IPIs sent via smp_send_reschedule()
irq_work: Trace self-IPIs sent via arch_irq_work_raise()
smp: Trace IPIs sent via arch_send_call_function_ipi_mask()
sched, smp: Trace IPIs sent via send_call_function_single_ipi()
trace: Add trace_ipi_send_cpumask()
kernel/smp: Make csdlock_debug= resettable
locking/csd_lock: Remove per-CPU data indirection from CSD lock debugging
locking/csd_lock: Remove added data from CSD lock debugging
locking/csd_lock: Add Kconfig option for csd_debug default
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- Mark arch_cpu_idle_dead() __noreturn, make all architectures &
drivers that did this inconsistently follow this new, common
convention, and fix all the fallout that objtool can now detect
statically
- Fix/improve the ORC unwinder becoming unreliable due to
UNWIND_HINT_EMPTY ambiguity, split it into UNWIND_HINT_END_OF_STACK
and UNWIND_HINT_UNDEFINED to resolve it
- Fix noinstr violations in the KCSAN code and the lkdtm/stackleak code
- Generate ORC data for __pfx code
- Add more __noreturn annotations to various kernel startup/shutdown
and panic functions
- Misc improvements & fixes
* tag 'objtool-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
x86/hyperv: Mark hv_ghcb_terminate() as noreturn
scsi: message: fusion: Mark mpt_halt_firmware() __noreturn
x86/cpu: Mark {hlt,resume}_play_dead() __noreturn
btrfs: Mark btrfs_assertfail() __noreturn
objtool: Include weak functions in global_noreturns check
cpu: Mark nmi_panic_self_stop() __noreturn
cpu: Mark panic_smp_self_stop() __noreturn
arm64/cpu: Mark cpu_park_loop() and friends __noreturn
x86/head: Mark *_start_kernel() __noreturn
init: Mark start_kernel() __noreturn
init: Mark [arch_call_]rest_init() __noreturn
objtool: Generate ORC data for __pfx code
x86/linkage: Fix padding for typed functions
objtool: Separate prefix code from stack validation code
objtool: Remove superfluous dead_end_function() check
objtool: Add symbol iteration helpers
objtool: Add WARN_INSN()
scripts/objdump-func: Support multiple functions
context_tracking: Fix KCSAN noinstr violation
objtool: Add stackleak instrumentation to uaccess safe list
...
|
|
Add explicit _lazy_tlb annotated functions for lazy tlb mm refcounting.
This makes the lazy tlb mm references more obvious, and allows the
refcounting scheme to be modified in later changes. There is no
functional change with this patch.
Link: https://lkml.kernel.org/r/20230203071837.1136453-3-npiggin@gmail.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
To be able to trace invocations of smp_send_reschedule(), rename the
arch-specific definitions of it to arch_smp_send_reschedule() and wrap it
into an smp_send_reschedule() that contains a tracepoint.
Changes to include the declaration of the tracepoint were driven by the
following coccinelle script:
@func_use@
@@
smp_send_reschedule(...);
@include@
@@
#include <trace/events/ipi.h>
@no_include depends on func_use && !include@
@@
#include <...>
+
+ #include <trace/events/ipi.h>
[csky bits]
[riscv bits]
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Guo Ren <guoren@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230307143558.294354-6-vschneid@redhat.com
|
|
Before commit 076cbf5d2163 ("x86/xen: don't let xen_pv_play_dead()
return"), in Xen, when a previously offlined CPU was brought back
online, it unexpectedly resumed execution where it left off in the
middle of the idle loop.
There were some hacks to make that work, but the behavior was surprising
as do_idle() doesn't expect an offlined CPU to return from the dead (in
arch_cpu_idle_dead()).
Now that Xen has been fixed, and the arch-specific implementations of
arch_cpu_idle_dead() also don't return, give it a __noreturn attribute.
This will cause the compiler to complain if an arch-specific
implementation might return. It also improves code generation for both
caller and callee.
Also fixes the following warning:
vmlinux.o: warning: objtool: do_idle+0x25f: unreachable instruction
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/60d527353da8c99d4cf13b6473131d46719ed16d.1676358308.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
This affects only 64-bit ELFv2 kernels, and reduces the minimum
asm-created stack frame size from 112 to 32 byte on those kernels.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221127124942.1665522-16-npiggin@gmail.com
|
|
At boot time, it is not necessary to delay between polls of
cpu_callin_map when waiting for a kicked CPU to come up. Remove the
delay intervals, but preserve the overall deadline (five seconds).
At run time, the first poll result is usually negative and we incur a
sleeping wait. If we spin on the callin word for a short time first,
we can reduce __cpu_up() from dozens of milliseconds to under 1ms in
the common case on a P9 LPAR:
$ ppc64_cpu --smt=off
$ bpftrace -e 'kprobe:__cpu_up {
@start[tid] = nsecs;
}
kretprobe:__cpu_up /@start[tid]/ {
@us = hist((nsecs - @start[tid]) / 1000);
delete(@start[tid]);
}' -c 'ppc64_cpu --smt=on'
Before:
@us:
[16K, 32K) 85 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[32K, 64K) 13 |@@@@@@@ |
After:
@us:
[128, 256) 95 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[256, 512) 3 |@ |
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926220250.157022-1-nathanl@linux.ibm.com
|
|
CONFIG_PPC_FSL_BOOK3E is redundant with CONFIG_PPC_E500.
Remove it.
And rename five files accordingly.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Rename include guards to match new file names]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/795cb93b88c9a0279289712e674f39e3b108a1b4.1663606876.git.christophe.leroy@csgroup.eu
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc updates from Andrew Morton:
"Updates to various subsystems which I help look after. lib, ocfs2,
fatfs, autofs, squashfs, procfs, etc. A relatively small amount of
material this time"
* tag 'mm-nonmm-stable-2022-08-06-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits)
scripts/gdb: ensure the absolute path is generated on initial source
MAINTAINERS: kunit: add David Gow as a maintainer of KUnit
mailmap: add linux.dev alias for Brendan Higgins
mailmap: update Kirill's email
profile: setup_profiling_timer() is moslty not implemented
ocfs2: fix a typo in a comment
ocfs2: use the bitmap API to simplify code
ocfs2: remove some useless functions
lib/mpi: fix typo 'the the' in comment
proc: add some (hopefully) insightful comments
bdi: remove enum wb_congested_state
kernel/hung_task: fix address space of proc_dohung_task_timeout_secs
lib/lzo/lzo1x_compress.c: replace ternary operator with min() and min_t()
squashfs: support reading fragments in readahead call
squashfs: implement readahead
squashfs: always build "file direct" version of page actor
Revert "squashfs: provide backing_dev_info in order to disable read-ahead"
fs/ocfs2: Fix spelling typo in comment
ia64: old_rr4 added under CONFIG_HUGETLB_PAGE
proc: fix test for "vsyscall=xonly" boot option
...
|
|
The setup_profiling_timer() is mostly un-implemented by many
architectures. In many places it isn't guarded by CONFIG_PROFILE which is
needed for it to be used. Make it a weak symbol in kernel/profile.c and
remove the 'return -EINVAL' implementations from the kenrel.
There are a couple of architectures which do return 0 from the
setup_profiling_timer() function but they don't seem to do anything else
with it. To keep the /proc compatibility for now, leave these for a
future update or removal.
On ARM, this fixes the following sparse warning:
arch/arm/kernel/smp.c:793:5: warning: symbol 'setup_profiling_timer' was not declared. Should it be static?
Link: https://lkml.kernel.org/r/20220721195509.418205-1-ben-linux@fluff.org
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
During kdump, two set of NMI IPIs are sent to secondary CPUs, if
'crash_kexec_post_notifiers' option is set. The first set of NMI IPIs
to stop the CPUs and the other set to collect register data. Instead,
capture register data for secondary CPUs while stopping them itself.
Also, fallback to smp_send_stop() in case the function gets called
without kdump configured.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220630064942.192283-1-hbathini@linux.ibm.com
|
|
Rather than waiting for the bots to fix these one-by-one, fix all
occurences of "the the" throughout arch/powerpc.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220518142629.513007-1-mpe@ellerman.id.au
|
|
Disable address sanitization for raw and non-maskable interrupt
handlers, because they can run in real mode, where we cannot access
the shadow memory. (Note that kasan_arch_is_ready() doesn't test for
real mode, since it is a static branch for speed, and in any case not
all the entry points to the generic KASAN code are protected by
kasan_arch_is_ready guards.)
The changes to interrupt_nmi_enter/exit_prepare() look larger than
they actually are. The changes are equivalent to adding
!IS_ENABLED(CONFIG_KASAN) to the conditions for calling nmi_enter() or
nmi_exit() in real mode. That is, the code is equivalent to using the
following condition for calling nmi_enter/exit:
if (((!IS_ENABLED(CONFIG_PPC_BOOK3S_64) ||
!firmware_has_feature(FW_FEATURE_LPAR) ||
radix_enabled()) &&
!IS_ENABLED(CONFIG_KASAN) ||
(mfmsr() & MSR_DR))
That unwieldy condition has been split into several statements with
comments, for easier reading.
The nmi_ipi_lock functions that call atomic functions (i.e.,
nmi_ipi_lock_start(), nmi_ipi_lock() and nmi_ipi_unlock()), besides
being marked noinstr, now call arch_atomic_* functions instead of
atomic_* functions because with KASAN enabled, the atomic_* functions
are wrappers which explicitly do address sanitization on their
arguments. Since we are trying to avoid address sanitization, we have
to use the lower-level arch_atomic_* versions.
In hv_nmi_check_nonrecoverable(), the regs_set_unrecoverable() call
has been open-coded so as to avoid having to either trust the inlining
or mark regs_set_unrecoverable() as noinstr.
[paulus@ozlabs.org: combined a few work-in-progress commits of
Daniel's and wrote the commit message.]
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/YoTFGaKM8Pd46PIK@cleo
|
|
Several files include asm/prom.h for no reason.
Clean it up.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Drop change to prom_parse.c as reported by lkp@intel.com]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7c9b8fda63dcf63e1b28f43e7ebdb95182cbc286.1646767214.git.christophe.leroy@csgroup.eu
|
|
Various spelling mistakes in comments.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220430185654.5855-1-Julia.Lawall@inria.fr
|
|
We originally added asm-prototypes.h in commit 42f5b4cacd78 ("powerpc:
Introduce asm-prototypes.h"). It's purpose was for prototypes of C
functions that are only called from asm, in order to fix sparse
warnings about missing prototypes.
A few months later Nick added a different use case in
commit 4efca4ed05cb ("kbuild: modversions for EXPORT_SYMBOL() for asm")
for C prototypes for exported asm functions. This is basically the
inverse of our original usage.
Since then we've added various prototypes to asm-prototypes.h for both
reasons, meaning we now need to unstitch it all.
Dispatch prototypes of C functions into relevant headers and keep
only the prototypes for functions defined in assembly.
For the time being, leave prom_init() there because moving it
into asm/prom.h or asm/setup.h conflicts with
drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadowrom.o
This will be fixed later by untaggling asm/pci.h and asm/prom.h
or by renaming the function in shadowrom.c
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/62d46904eca74042097acf4cb12c175e3067f3d1.1646413435.git.christophe.leroy@csgroup.eu
|
|
current_set extern not needed anymore since
commit eafd825ed710 ("powerpc/64: Simplify __secondary_start
paca->kstack handling")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a55eb65c9d7319f0af3c31e3f6ba36522f10003d.1646413435.git.christophe.leroy@csgroup.eu
|
|
Some functions defined in `arch/powerpc/kernel` (and one in `arch/powerpc/
kexec`) are deserving of an `__init` macro attribute. These functions are
only called by other initialization functions and therefore should inherit
the attribute.
Also, change function declarations in header files to include `__init`.
Signed-off-by: Nick Child <nick.child@ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211216220035.605465-2-nick.child@ibm.com
|
|
In panic path, fadump is triggered via a panic notifier function.
Before calling panic notifier functions, smp_send_stop() gets called,
which stops all CPUs except the panic'ing CPU. Commit 8389b37dffdc
("powerpc: stop_this_cpu: remove the cpu from the online map.") and
again commit bab26238bbd4 ("powerpc: Offline CPU in stop_this_cpu()")
started marking CPUs as offline while stopping them. So, if a kernel
has either of the above commits, vmcore captured with fadump via panic
path would not process register data for all CPUs except the panic'ing
CPU. Sample output of crash-utility with such vmcore:
# crash vmlinux vmcore
...
KERNEL: vmlinux
DUMPFILE: vmcore [PARTIAL DUMP]
CPUS: 1
DATE: Wed Nov 10 09:56:34 EST 2021
UPTIME: 00:00:42
LOAD AVERAGE: 2.27, 0.69, 0.24
TASKS: 183
NODENAME: XXXXXXXXX
RELEASE: 5.15.0+
VERSION: #974 SMP Wed Nov 10 04:18:19 CST 2021
MACHINE: ppc64le (2500 Mhz)
MEMORY: 8 GB
PANIC: "Kernel panic - not syncing: sysrq triggered crash"
PID: 3394
COMMAND: "bash"
TASK: c0000000150a5f80 [THREAD_INFO: c0000000150a5f80]
CPU: 1
STATE: TASK_RUNNING (PANIC)
crash> p -x __cpu_online_mask
__cpu_online_mask = $1 = {
bits = {0x2, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}
}
crash>
crash>
crash> p -x __cpu_active_mask
__cpu_active_mask = $2 = {
bits = {0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}
}
crash>
While this has been the case since fadump was introduced, the issue
was not identified for two probable reasons:
- In general, the bulk of the vmcores analyzed were from crash
due to exception.
- The above did change since commit 8341f2f222d7 ("sysrq: Use
panic() to force a crash") started using panic() instead of
deferencing NULL pointer to force a kernel crash. But then
commit de6e5d38417e ("powerpc: smp_send_stop do not offline
stopped CPUs") stopped marking CPUs as offline till kernel
commit bab26238bbd4 ("powerpc: Offline CPU in stop_this_cpu()")
reverted that change.
To ensure post processing register data of all other CPUs happens
as intended, let panic() function take the crash friendly path (read
crash_smp_send_stop()) with the help of crash_kexec_post_notifiers
option. Also, as register data for all CPUs is captured by f/w, skip
IPI callbacks here for fadump, to avoid any complications in finding
the right backtraces.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211207103719.91117-2-hbathini@linux.ibm.com
|
|
Kdump can be triggered after panic_notifers since commit f06e5153f4ae2
("kernel/panic.c: add "crash_kexec_post_notifiers" option for kdump
after panic_notifers") introduced crash_kexec_post_notifiers option.
But using this option would mean smp_send_stop(), that marks all other
CPUs as offline, gets called before kdump is triggered. As a result,
kdump routines fail to save other CPUs' registers. To fix this, kdump
friendly crash_smp_send_stop() function was introduced with kernel
commit 0ee59413c967 ("x86/panic: replace smp_send_stop() with kdump
friendly version in panic path"). Override this kdump friendly weak
function to handle crash_kexec_post_notifiers option appropriately
on powerpc.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
[Fixed signature of crash_stop_this_cpu() - reported by lkp@intel.com]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211207103719.91117-1-hbathini@linux.ibm.com
|
|
setup_profiling_timer() is only needed when CONFIG_PROFILING is enabled.
Fixes the following W=1 warning when CONFIG_PROFILING=n:
linux/arch/powerpc/kernel/smp.c:1638:5: error: no previous prototype for ‘setup_profiling_timer’
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211124093254.1054750-5-mpe@ellerman.id.au
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Convert /reserved-memory bindings to schemas
- Convert a bunch of NFC bindings to schemas
- Convert bindings to schema: Xilinx USB, Freescale DDR controller, Arm
CCI-400, UBlox Neo-6M, 1-Wire GPIO, MSI controller, ASpeed LPC, OMAP
and Inside-Secure HWRNG, register-bit-led, OV5640, Silead GSL1680,
Elan ekth3000, Marvell bluetooth, TI wlcore, TI bluetooth, ESP
ESP8089, tlm,trusted-foundations, Microchip cap11xx, Ralink SoCs and
boards, and TI sysc
- New binding schemas for: msi-ranges, Aspeed UART routing controller,
palmbus, Xylon LogiCVC display controller, Mediatek's MT7621 SDRAM
memory controller, and Apple M1 PCIe host
- Run schema checks for %.dtb targets
- Improve build time when using DT_SCHEMA_FILES
- Improve error message when dtschema is not found
- Various doc reference fixes in MAINTAINERS
- Convert architectures to common CPU h/w ID parsing function
of_get_cpu_hwid().
- Allow for empty NUMA node IDs which may be hotplugged
- Cleanup of __fdt_scan_reserved_mem()
- Constify device_node parameters
- Update dtc to upstream v1.6.1-19-g0a3a9d3449c8. Adds new checks
'node_name_vs_property_name' and 'interrupt_map'.
- Enable dtc 'unit_address_format' warning by default
- Fix unittest EXPECT text for gpio hog errors
* tag 'devicetree-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (97 commits)
dt-bindings: net: ti,bluetooth: Document default max-speed
dt-bindings: pci: rcar-pci-ep: Document r8a7795
dt-bindings: net: qcom,ipa: IPA does support up to two iommus
of/fdt: Remove of_scan_flat_dt() usage for __fdt_scan_reserved_mem()
of: unittest: document intentional interrupt-map provider build warning
of: unittest: fix EXPECT text for gpio hog errors
of/unittest: Disable new dtc node_name_vs_property_name and interrupt_map warnings
scripts/dtc: Update to upstream version v1.6.1-19-g0a3a9d3449c8
dt-bindings: arm: firmware: tlm,trusted-foundations: Convert txt bindings to yaml
dt-bindings: display: tilcd: Fix endpoint addressing in example
dt-bindings: input: microchip,cap11xx: Convert txt bindings to yaml
dt-bindings: ufs: exynos-ufs: add exynosautov9 compatible
dt-bindings: ufs: exynos-ufs: add io-coherency property
dt-bindings: mips: convert Ralink SoCs and boards to schema
dt-bindings: display: xilinx: Fix example with psgtr
dt-bindings: net: nfc: nxp,pn544: Convert txt bindings to yaml
dt-bindings: Add a help message when dtschema tools are missing
dt-bindings: bus: ti-sysc: Update to use yaml binding
dt-bindings: sram: Allow numbers in sram region node name
dt-bindings: display: Document the Xylon LogiCVC display controller
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull thread_info update to move 'cpu' back from task_struct from Kees Cook:
"Cross-architecture update to move task_struct::cpu back into
thread_info on arm64, x86, s390, powerpc, and riscv. All Acked by arch
maintainers.
Quoting Ard Biesheuvel:
'Move task_struct::cpu back into thread_info
Keeping CPU in task_struct is problematic for architectures that
define raw_smp_processor_id() in terms of this field, as it
requires linux/sched.h to be included, which causes a lot of pain
in terms of circular dependencies (aka 'header soup')
This series moves it back into thread_info (where it came from)
for all architectures that enable THREAD_INFO_IN_TASK, addressing
the header soup issue as well as some pointless differences in the
implementations of task_cpu() and set_task_cpu()'"
* tag 'cpu-to-thread_info-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
riscv: rely on core code to keep thread_info::cpu updated
powerpc: smp: remove hack to obtain offset of task_struct::cpu
sched: move CPU field back into thread_info if THREAD_INFO_IN_TASK=y
powerpc: add CPU field to struct thread_info
s390: add CPU field to struct thread_info
x86: add CPU field to struct thread_info
arm64: add CPU field to struct thread_info
|
|
Replace open coded parsing of CPU nodes' 'reg' property with
of_get_cpu_hwid().
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211006164332.1981454-8-robh@kernel.org
|
|
With PREEMPT_COUNT=y, when a CPU is offlined and then onlined again, we
get:
BUG: scheduling while atomic: swapper/1/0/0x00000000
no locks held by swapper/1/0.
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.15.0-rc2+ #100
Call Trace:
dump_stack_lvl+0xac/0x108
__schedule_bug+0xac/0xe0
__schedule+0xcf8/0x10d0
schedule_idle+0x3c/0x70
do_idle+0x2d8/0x4a0
cpu_startup_entry+0x38/0x40
start_secondary+0x2ec/0x3a0
start_secondary_prolog+0x10/0x14
This is because powerpc's arch_cpu_idle_dead() decrements the idle task's
preempt count, for reasons explained in commit a7c2bb8279d2 ("powerpc:
Re-enable preemption before cpu_die()"), specifically "start_secondary()
expects a preempt_count() of 0."
However, since commit 2c669ef6979c ("powerpc/preempt: Don't touch the idle
task's preempt_count during hotplug") and commit f1a0a376ca0c ("sched/core:
Initialize the idle task with preemption disabled"), that justification no
longer holds.
The idle task isn't supposed to re-enable preemption, so remove the
vestigial preempt_enable() from the CPU offline path.
Tested with pseries and powernv in qemu, and pseries on PowerVM.
Fixes: 2c669ef6979c ("powerpc/preempt: Don't touch the idle task's preempt_count during hotplug")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211015173902.2278118-1-nathanl@linux.ibm.com
|
|
THREAD_INFO_IN_TASK moved the CPU field out of thread_info, but this
causes some issues on architectures that define raw_smp_processor_id()
in terms of this field, due to the fact that #include'ing linux/sched.h
to get at struct task_struct is problematic in terms of circular
dependencies.
Given that thread_info and task_struct are the same data structure
anyway when THREAD_INFO_IN_TASK=y, let's move it back so that having
access to the type definition of struct thread_info is sufficient to
reference the CPU number of the current task.
Note that this requires THREAD_INFO_IN_TASK's definition of the
task_thread_info() helper to be updated, as task_cpu() takes a
pointer-to-const, whereas task_thread_info() (which is used to generate
lvalues as well), needs a non-const pointer. So make it a macro instead.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
cpu_cpu_map holds all the CPUs in the DIE. However in PowerPC, when
onlining/offlining of CPUs, this mask doesn't get updated. This mask
is however updated when CPUs are added/removed. So when both
operations like online/offline of CPUs and adding/removing of CPUs are
done simultaneously, then cpumaps end up broken.
WARNING: CPU: 13 PID: 1142 at kernel/sched/topology.c:898
build_sched_domains+0xd48/0x1720
Modules linked in: rpadlpar_io rpaphp mptcp_diag xsk_diag tcp_diag
udp_diag raw_diag inet_diag unix_diag af_packet_diag netlink_diag
bonding tls nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib
nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct
nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set
rfkill nf_tables nfnetlink pseries_rng xts vmx_crypto uio_pdrv_genirq
uio binfmt_misc ip_tables xfs libcrc32c dm_service_time sd_mod t10_pi sg
ibmvfc scsi_transport_fc ibmveth dm_multipath dm_mirror dm_region_hash
dm_log dm_mod fuse
CPU: 13 PID: 1142 Comm: kworker/13:2 Not tainted 5.13.0-rc6+ #28
Workqueue: events cpuset_hotplug_workfn
NIP: c0000000001caac8 LR: c0000000001caac4 CTR: 00000000007088ec
REGS: c00000005596f220 TRAP: 0700 Not tainted (5.13.0-rc6+)
MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 48828222 XER:
00000009
CFAR: c0000000001ea698 IRQMASK: 0
GPR00: c0000000001caac4 c00000005596f4c0 c000000001c4a400 0000000000000036
GPR04: 00000000fffdffff c00000005596f1d0 0000000000000027 c0000018cfd07f90
GPR08: 0000000000000023 0000000000000001 0000000000000027 c0000018fe68ffe8
GPR12: 0000000000008000 c00000001e9d1880 c00000013a047200 0000000000000800
GPR16: c000000001d3c7d0 0000000000000240 0000000000000048 c000000010aacd18
GPR20: 0000000000000001 c000000010aacc18 c00000013a047c00 c000000139ec2400
GPR24: 0000000000000280 c000000139ec2520 c000000136c1b400 c000000001c93060
GPR28: c00000013a047c20 c000000001d3c6c0 c000000001c978a0 000000000000000d
NIP [c0000000001caac8] build_sched_domains+0xd48/0x1720
LR [c0000000001caac4] build_sched_domains+0xd44/0x1720
Call Trace:
[c00000005596f4c0] [c0000000001caac4] build_sched_domains+0xd44/0x1720 (unreliable)
[c00000005596f670] [c0000000001cc5ec] partition_sched_domains_locked+0x3ac/0x4b0
[c00000005596f710] [c0000000002804e4] rebuild_sched_domains_locked+0x404/0x9e0
[c00000005596f810] [c000000000283e60] rebuild_sched_domains+0x40/0x70
[c00000005596f840] [c000000000284124] cpuset_hotplug_workfn+0x294/0xf10
[c00000005596fc60] [c000000000175040] process_one_work+0x290/0x590
[c00000005596fd00] [c0000000001753c8] worker_thread+0x88/0x620
[c00000005596fda0] [c000000000181704] kthread+0x194/0x1a0
[c00000005596fe10] [c00000000000ccec] ret_from_kernel_thread+0x5c/0x70
Instruction dump:
485af049 60000000 2fa30800 409e0028 80fe0000 e89a00f8 e86100e8 38da0120
7f88e378 7ce53b78 4801fb91 60000000 <0fe00000> 39000000 38e00000 38c00000
Fix this by updating cpu_cpu_map aka cpumask_of_node() on every CPU
online/offline.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210826100521.412639-5-srikar@linux.vnet.ibm.com
|
|
Currently CACHE domain is not enabled on shared processor mode PowerVM
LPARS. On PowerVM systems, 'ibm,thread-group' device-tree property 2
under cpu-device-node indicates which all CPUs share L2-cache. However
'ibm,thread-group' device-tree property 2 is a relatively new property.
In absence of 'ibm,thread-group' property 2, 'l2-cache' device property
under cpu-device-node could help system to identify CPUs sharing L2-cache.
However this property is not exposed by PhyP in shared processor mode
configurations.
In absence of properties that inform OS about which CPUs share L2-cache,
fallback on core boundary.
Here are some stats from Power9 shared LPAR with the changes.
$ lscpu
Architecture: ppc64le
Byte Order: Little Endian
CPU(s): 32
On-line CPU(s) list: 0-31
Thread(s) per core: 8
Core(s) per socket: 1
Socket(s): 3
NUMA node(s): 2
Model: 2.2 (pvr 004e 0202)
Model name: POWER9 (architected), altivec supported
Hypervisor vendor: pHyp
Virtualization type: para
L1d cache: 32K
L1i cache: 32K
NUMA node0 CPU(s): 16-23
NUMA node1 CPU(s): 0-15,24-31
Physical sockets: 2
Physical chips: 1
Physical cores/chip: 10
Before patch
$ grep -r . /sys/kernel/debug/sched/domains/cpu0/domain*/name
Before
/sys/kernel/debug/sched/domains/cpu0/domain0/name:SMT
/sys/kernel/debug/sched/domains/cpu0/domain1/name:DIE
/sys/kernel/debug/sched/domains/cpu0/domain2/name:NUMA
After
/sys/kernel/debug/sched/domains/cpu0/domain0/name:SMT
/sys/kernel/debug/sched/domains/cpu0/domain1/name:CACHE
/sys/kernel/debug/sched/domains/cpu0/domain2/name:DIE
/sys/kernel/debug/sched/domains/cpu0/domain3/name:NUMA
$ awk '/domain/{print $1, $2}' /proc/schedstat | sort -u | sed -e 's/00000000,//g'
Before
domain0 00000055
domain0 000000aa
domain0 00005500
domain0 0000aa00
domain0 00550000
domain0 00aa0000
domain0 55000000
domain0 aa000000
domain1 00ff0000
domain1 ff00ffff
domain2 ffffffff
After
domain0 00000055
domain0 000000aa
domain0 00005500
domain0 0000aa00
domain0 00550000
domain0 00aa0000
domain0 55000000
domain0 aa000000
domain1 000000ff
domain1 0000ff00
domain1 00ff0000
domain1 ff000000
domain2 ff00ffff
domain2 ffffffff
domain3 ffffffff
(Lower is better)
perf stat -a -r 5 -n perf bench sched pipe | tail -n 2
Before
153.798 +- 0.142 seconds time elapsed ( +- 0.09% )
After
111.545 +- 0.652 seconds time elapsed ( +- 0.58% )
which is an improvement of 27.47%
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210826100401.412519-4-srikar@linux.vnet.ibm.com
|
|
lscpu() uses core_siblings to list the number of sockets in the
system. core_siblings is set using topology_core_cpumask.
While optimizing the powerpc bootup path, Commit 4ca234a9cbd7
("powerpc/smp: Stop updating cpu_core_mask"). it was found that
updating cpu_core_mask() ended up taking a lot of time. It was thought
that on Powerpc, cpu_core_mask() would always be same as
cpu_cpu_mask() i.e number of sockets will always be equal to number of
nodes. As an optimization, cpu_core_mask() was made a snapshot of
cpu_cpu_mask().
However that was found to be false with PowerPc KVM guests, where each
node could have more than one socket. So with Commit c47f892d7aa6
("powerpc/smp: Reintroduce cpu_core_mask"), cpu_core_mask was updated
based on chip_id but in an optimized way using some mask manipulations
and chip_id caching.
However on non-PowerNV and non-pseries KVM guests (i.e not
implementing cpu_to_chip_id(), continued to use a copy of
cpu_cpu_mask().
There are two issues that were noticed on such systems
1. lscpu would report one extra socket.
On a IBM,9009-42A (aka zz system) which has only 2 chips/ sockets/
nodes, lscpu would report
Architecture: ppc64le
Byte Order: Little Endian
CPU(s): 160
On-line CPU(s) list: 0-159
Thread(s) per core: 8
Core(s) per socket: 6
Socket(s): 3 <--------------
NUMA node(s): 2
Model: 2.2 (pvr 004e 0202)
Model name: POWER9 (architected), altivec supported
Hypervisor vendor: pHyp
Virtualization type: para
L1d cache: 32K
L1i cache: 32K
L2 cache: 512K
L3 cache: 10240K
NUMA node0 CPU(s): 0-79
NUMA node1 CPU(s): 80-159
2. Currently cpu_cpu_mask is updated when a core is
added/removed. However its not updated when smt mode switching or on
CPUs are explicitly offlined. However all other percpu masks are
updated to ensure only active/online CPUs are in the masks.
This results in build_sched_domain traces since there will be CPUs in
cpu_cpu_mask() but those CPUs are not present in SMT / CACHE / MC /
NUMA domains. A loop of threads running smt mode switching and core
add/remove will soon show this trace.
Hence cpu_cpu_mask has to be update at smt mode switch.
This will have impact on cpu_core_mask(). cpu_core_mask() is a
snapshot of cpu_cpu_mask. Different CPUs within the same socket will
end up having different cpu_core_masks since they are snapshots at
different points of time. This means when lscpu will start reporting
many more sockets than the actual number of sockets/ nodes / chips.
Different ways to handle this problem:
A. Update the snapshot aka cpu_core_mask for all CPUs whenever
cpu_cpu_mask is updated. This would a non-optimal solution.
B. Instead of a cpumask_var_t, make cpu_core_map a cpumask pointer
pointing to cpu_cpu_mask. However percpu cpumask pointer is frowned
upon and we need a clean way to handle PowerPc KVM guest which is
not a snapshot.
C. Update cpu_core_masks all PowerPc systems like in PowerPc KVM
guests using mask manipulations. This approach is relatively simple
and unifies with the existing code.
D. On top of 3, we could also resurrect get_physical_package_id which
could return a nid for the said CPU. However this is not needed at this
time.
Option C is the preferred approach for now.
While this is somewhat a revert of Commit 4ca234a9cbd7 ("powerpc/smp:
Stop updating cpu_core_mask").
1. Plain revert has some conflicts
2. For chip_id == -1, the cpu_core_mask is made identical to
cpu_cpu_mask, unlike previously where cpu_core_mask was set to a core
if chip_id doesn't exist.
This goes by the principle that if chip_id is not exposed, then
sockets / chip / node share the same set of CPUs.
With the fix, lscpu o/p would be
Architecture: ppc64le
Byte Order: Little Endian
CPU(s): 160
On-line CPU(s) list: 0-159
Thread(s) per core: 8
Core(s) per socket: 6
Socket(s): 2 <--------------
NUMA node(s): 2
Model: 2.2 (pvr 004e 0202)
Model name: POWER9 (architected), altivec supported
Hypervisor vendor: pHyp
Virtualization type: para
L1d cache: 32K
L1i cache: 32K
L2 cache: 512K
L3 cache: 10240K
NUMA node0 CPU(s): 0-79
NUMA node1 CPU(s): 80-159
Fixes: 4ca234a9cbd7 ("powerpc/smp: Stop updating cpu_core_mask")
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210826100401.412519-3-srikar@linux.vnet.ibm.com
|
|
Aneesh reported a crash with a fairly recent upstream kernel when
booting kernel whose commandline was appended with nr_cpus=2
1:mon> e
cpu 0x1: Vector: 300 (Data Access) at [c000000008a67bd0]
pc: c00000000002557c: cpu_to_chip_id+0x3c/0x100
lr: c000000000058380: start_secondary+0x460/0xb00
sp: c000000008a67e70
msr: 8000000000001033
dar: 10
dsisr: 80000
current = 0xc00000000891bb00
paca = 0xc0000018ff981f80 irqmask: 0x03 irq_happened: 0x01
pid = 0, comm = swapper/1
Linux version 5.13.0-rc3-15704-ga050a6d2b7e8 (kvaneesh@ltc-boston8) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #433 SMP Tue May 25 02:38:49 CDT 2021
1:mon> t
[link register ] c000000000058380 start_secondary+0x460/0xb00
[c000000008a67e70] c000000008a67eb0 (unreliable)
[c000000008a67eb0] c0000000000589d4 start_secondary+0xab4/0xb00
[c000000008a67f90] c00000000000c654 start_secondary_prolog+0x10/0x14
Current code assumes that num_possible_cpus() is always greater than
threads_per_core. However this may not be true when using nr_cpus=2 or
similar options. Handle the case where num_possible_cpus() is not an
exact multiple of threads_per_core.
Fixes: c1e53367dab1 ("powerpc/smp: Cache CPU to chip lookup")
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Debugged-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210826100401.412519-2-srikar@linux.vnet.ibm.com
|
|
On POWER10 systems, the "ibm,thread-groups" property "2" indicates the cpus
in thread-group share both L2 and L3 caches. Hence, use cache_property = 2
itself to find both the L2 and L3 cache siblings.
Hence, create a new thread_group_l3_cache_map to keep list of L3 siblings,
but fill the mask using same property "2" array.
Signed-off-by: Parth Shah <parth@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210728175607.591679-4-parth@linux.ibm.com
|
|
Currently the cacheinfo code on powerpc indexes the "cache" objects
(modelling the L1/L2/L3 caches) where the key is device-tree node
corresponding to that cache. On some of the POWER server platforms
thread-groups within the core share different sets of caches (Eg: On
SMT8 POWER9 systems, threads 0,2,4,6 of a core share L1 cache and
threads 1,3,5,7 of the same core share another L1 cache). On such
platforms, there is a single device-tree node corresponding to that
cache and the cache-configuration within the threads of the core is
indicated via "ibm,thread-groups" device-tree property.
Since the current code is not aware of the "ibm,thread-groups"
property, on the aforementoined systems, cacheinfo code still treats
all the threads in the core to be sharing the cache because of the
single device-tree node (In the earlier example, the cacheinfo code
would says CPUs 0-7 share L1 cache).
In this patch, we make the powerpc cacheinfo code aware of the
"ibm,thread-groups" property. We indexe the "cache" objects by the
key-pair (device-tree node, thread-group id). For any CPUX, for a
given level of cache, the thread-group id is defined to be the first
CPU in the "ibm,thread-groups" cache-group containing CPUX. For levels
of cache which are not represented in "ibm,thread-groups" property,
the thread-group id is -1.
[parth: Remove "static" keyword for the definition of "thread_group_l1_cache_map"
and "thread_group_l2_cache_map" to get rid of the compile error.]
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Parth Shah <parth@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210728175607.591679-2-parth@linux.ibm.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- A big series refactoring parts of our KVM code, and converting some
to C.
- Support for ARCH_HAS_SET_MEMORY, and ARCH_HAS_STRICT_MODULE_RWX on
some CPUs.
- Support for the Microwatt soft-core.
- Optimisations to our interrupt return path on 64-bit.
- Support for userspace access to the NX GZIP accelerator on PowerVM on
Power10.
- Enable KUAP and KUEP by default on 32-bit Book3S CPUs.
- Other smaller features, fixes & cleanups.
Thanks to: Andy Shevchenko, Aneesh Kumar K.V, Arnd Bergmann, Athira
Rajeev, Baokun Li, Benjamin Herrenschmidt, Bharata B Rao, Christophe
Leroy, Daniel Axtens, Daniel Henrique Barboza, Finn Thain, Geoff Levand,
Haren Myneni, Jason Wang, Jiapeng Chong, Joel Stanley, Jordan Niethe,
Kajol Jain, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas
Piggin, Nick Desaulniers, Paul Mackerras, Russell Currey, Sathvika
Vasireddy, Shaokun Zhang, Stephen Rothwell, Sudeep Holla, Suraj Jitindar
Singh, Tom Rix, Vaibhav Jain, YueHaibing, Zhang Jianhua, and Zhen Lei.
* tag 'powerpc-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (218 commits)
powerpc: Only build restart_table.c for 64s
powerpc/64s: move ret_from_fork etc above __end_soft_masked
powerpc/64s/interrupt: clean up interrupt return labels
powerpc/64/interrupt: add missing kprobe annotations on interrupt exit symbols
powerpc/64: enable MSR[EE] in irq replay pt_regs
powerpc/64s/interrupt: preserve regs->softe for NMI interrupts
powerpc/64s: add a table of implicit soft-masked addresses
powerpc/64e: remove implicit soft-masking and interrupt exit restart logic
powerpc/64e: fix CONFIG_RELOCATABLE build warnings
powerpc/64s: fix hash page fault interrupt handler
powerpc/4xx: Fix setup_kuep() on SMP
powerpc/32s: Fix setup_{kuap/kuep}() on SMP
powerpc/interrupt: Use names in check_return_regs_valid()
powerpc/interrupt: Also use exit_must_hard_disable() on PPC32
powerpc/sysfs: Replace sizeof(arr)/sizeof(arr[0]) with ARRAY_SIZE
powerpc/ptrace: Refactor regs_set_return_{msr/ip}
powerpc/ptrace: Move set_return_regs_changed() before regs_set_return_{msr/ip}
powerpc/stacktrace: Fix spurious "stale" traces in raise_backtrace_ipi()
powerpc/pseries/vas: Include irqdomain.h
powerpc: mark local variables around longjmp as volatile
...
|
|
Merge misc updates from Andrew Morton:
"191 patches.
Subsystems affected by this patch series: kthread, ia64, scripts,
ntfs, squashfs, ocfs2, kernel/watchdog, and mm (gup, pagealloc, slab,
slub, kmemleak, dax, debug, pagecache, gup, swap, memcg, pagemap,
mprotect, bootmem, dma, tracing, vmalloc, kasan, initialization,
pagealloc, and memory-failure)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (191 commits)
mm,hwpoison: make get_hwpoison_page() call get_any_page()
mm,hwpoison: send SIGBUS with error virutal address
mm/page_alloc: split pcp->high across all online CPUs for cpuless nodes
mm/page_alloc: allow high-order pages to be stored on the per-cpu lists
mm: replace CONFIG_FLAT_NODE_MEM_MAP with CONFIG_FLATMEM
mm: replace CONFIG_NEED_MULTIPLE_NODES with CONFIG_NUMA
docs: remove description of DISCONTIGMEM
arch, mm: remove stale mentions of DISCONIGMEM
mm: remove CONFIG_DISCONTIGMEM
m68k: remove support for DISCONTIGMEM
arc: remove support for DISCONTIGMEM
arc: update comment about HIGHMEM implementation
alpha: remove DISCONTIGMEM and NUMA
mm/page_alloc: move free_the_page
mm/page_alloc: fix counting of managed_pages
mm/page_alloc: improve memmap_pages dbg msg
mm: drop SECTION_SHIFT in code comments
mm/page_alloc: introduce vm.percpu_pagelist_high_fraction
mm/page_alloc: limit the number of pages on PCP lists when reclaim is active
mm/page_alloc: scale the number of pages that are batch freed
...
|
|
After removal of DISCINTIGMEM the NEED_MULTIPLE_NODES and NUMA
configuration options are equivalent.
Drop CONFIG_NEED_MULTIPLE_NODES and use CONFIG_NUMA instead.
Done with
$ sed -i 's/CONFIG_NEED_MULTIPLE_NODES/CONFIG_NUMA/' \
$(git grep -wl CONFIG_NEED_MULTIPLE_NODES)
$ sed -i 's/NEED_MULTIPLE_NODES/NUMA/' \
$(git grep -wl NEED_MULTIPLE_NODES)
with manual tweaks afterwards.
[rppt@linux.ibm.com: fix arm boot crash]
Link: https://lkml.kernel.org/r/YMj9vHhHOiCVN4BF@linux.ibm.com
Link: https://lkml.kernel.org/r/20210608091316.3622-9-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
printk_safe_flush_on_panic() has special lock breaking code for the case
where we panic()ed with the console lock held. It relies on panic IPI
causing other CPUs to mark themselves offline.
Do as most other architectures do.
This effectively reverts commit de6e5d38417e ("powerpc: smp_send_stop do
not offline stopped CPUs"), unfortunately it may result in some false
positive warnings, but the alternative is more situations where we can
crash without getting messages out.
Fixes: de6e5d38417e ("powerpc: smp_send_stop do not offline stopped CPUs")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210623041245.865134-1-npiggin@gmail.com
|
|
In order to selectively activate KUAP and KUEP in a following patch,
perform KUAP and KUEP initialisation in C.
Unlike PPC64, PPC32 doesn't have an early_setup_secondary(),
so do it in start_secondary().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/87be72023448dd4e476744ed279b8c04b8d08a1c.1622708530.git.christophe.leroy@csgroup.eu
|
|
As pointed out by commit
de9b8f5dcbd9 ("sched: Fix crash trying to dequeue/enqueue the idle thread")
init_idle() can and will be invoked more than once on the same idle
task. At boot time, it is invoked for the boot CPU thread by
sched_init(). Then smp_init() creates the threads for all the secondary
CPUs and invokes init_idle() on them.
As the hotplug machinery brings the secondaries to life, it will issue
calls to idle_thread_get(), which itself invokes init_idle() yet again.
In this case it's invoked twice more per secondary: at _cpu_up(), and at
bringup_cpu().
Given smp_init() already initializes the idle tasks for all *possible*
CPUs, no further initialization should be required. Now, removing
init_idle() from idle_thread_get() exposes some interesting expectations
with regards to the idle task's preempt_count: the secondary startup always
issues a preempt_disable(), requiring some reset of the preempt count to 0
between hot-unplug and hotplug, which is currently served by
idle_thread_get() -> idle_init().
Given the idle task is supposed to have preemption disabled once and never
see it re-enabled, it seems that what we actually want is to initialize its
preempt_count to PREEMPT_DISABLED and leave it there. Do that, and remove
init_idle() from idle_thread_get().
Secondary startups were patched via coccinelle:
@begone@
@@
-preempt_disable();
...
cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210512094636.2958515-1-valentin.schneider@arm.com
|
|
Geethika reported a trace when doing a dlpar CPU add.
------------[ cut here ]------------
WARNING: CPU: 152 PID: 1134 at kernel/sched/topology.c:2057
CPU: 152 PID: 1134 Comm: kworker/152:1 Not tainted 5.12.0-rc5-master #5
Workqueue: events cpuset_hotplug_workfn
NIP: c0000000001cfc14 LR: c0000000001cfc10 CTR: c0000000007e3420
REGS: c0000034a08eb260 TRAP: 0700 Not tainted (5.12.0-rc5-master+)
MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 28828422 XER: 00000020
CFAR: c0000000001fd888 IRQMASK: 0 #012GPR00: c0000000001cfc10
c0000034a08eb500 c000000001f35400 0000000000000027 #012GPR04:
c0000035abaa8010 c0000035abb30a00 0000000000000027 c0000035abaa8018
#012GPR08: 0000000000000023 c0000035abaaef48 00000035aa540000
c0000035a49dffe8 #012GPR12: 0000000028828424 c0000035bf1a1c80
0000000000000497 0000000000000004 #012GPR16: c00000000347a258
0000000000000140 c00000000203d468 c000000001a1a490 #012GPR20:
c000000001f9c160 c0000034adf70920 c0000034aec9fd20 0000000100087bd3
#012GPR24: 0000000100087bd3 c0000035b3de09f8 0000000000000030
c0000035b3de09f8 #012GPR28: 0000000000000028 c00000000347a280
c0000034aefe0b00 c0000000010a2a68
NIP [c0000000001cfc14] build_sched_domains+0x6a4/0x1500
LR [c0000000001cfc10] build_sched_domains+0x6a0/0x1500
Call Trace:
[c0000034a08eb500] [c0000000001cfc10] build_sched_domains+0x6a0/0x1500 (unreliable)
[c0000034a08eb640] [c0000000001d1e6c] partition_sched_domains_locked+0x3ec/0x530
[c0000034a08eb6e0] [c0000000002936d4] rebuild_sched_domains_locked+0x524/0xbf0
[c0000034a08eb7e0] [c000000000296bb0] rebuild_sched_domains+0x40/0x70
[c0000034a08eb810] [c000000000296e74] cpuset_hotplug_workfn+0x294/0xe20
[c0000034a08ebc30] [c000000000178dd0] process_one_work+0x300/0x670
[c0000034a08ebd10] [c0000000001791b8] worker_thread+0x78/0x520
[c0000034a08ebda0] [c000000000185090] kthread+0x1a0/0x1b0
[c0000034a08ebe10] [c00000000000ccec] ret_from_kernel_thread+0x5c/0x70
Instruction dump:
7d2903a6 4e800421 e8410018 7f67db78 7fe6fb78 7f45d378 7f84e378 7c681b78
3c62ff1a 3863c6f8 4802dc35 60000000 <0fe00000> 3920fff4 f9210070 e86100a0
---[ end trace 532d9066d3d4d7ec ]---
Some of the per-CPU masks use cpu_cpu_mask as a filter to limit the search
for related CPUs. On a dlpar add of a CPU, update cpu_cpu_mask before
updating the per-CPU masks. This will ensure the cpu_cpu_mask is updated
correctly before its used in setting the masks. Setting the numa_node will
ensure that when cpu_cpu_mask() gets called, the correct node number is
used. This code movement helped fix the above call trace.
Reported-by: Geetika Moolchandani <Geetika.Moolchandani1@ibm.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210401154200.150077-1-srikar@linux.vnet.ibm.com
|
|
On systems with large CPUs per node, even with the filtered matching of
related CPUs, there can be large number of calls to cpu_to_chip_id for
the same CPU. For example with 4096 vCPU, 1 node QEMU configuration,
with 4 threads per core, system could be see upto 1024 calls to
cpu_to_chip_id() for the same CPU. On a given system, cpu_to_chip_id()
for a given CPU would always return the same. Hence cache the result in
a lookup table for use in subsequent calls.
Since all CPUs sharing the same core will belong to the same chip, the
lookup_table has an entry for one CPU per core. chip_id_lookup_table is
not being freed and would be used on subsequent CPU online post CPU
offline.
Reported-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210415120934.232271-4-srikar@linux.vnet.ibm.com
|
|
Daniel reported that with Commit 4ca234a9cbd7 ("powerpc/smp: Stop
updating cpu_core_mask") QEMU was unable to set single NUMA node SMP
topologies such as:
-smp 8,maxcpus=8,cores=2,threads=2,sockets=2
i.e he expected 2 sockets in one NUMA node.
The above commit helped to reduce boot time on Large Systems for
example 4096 vCPU single socket QEMU instance. PAPR is silent on
having more than one socket within a NUMA node.
cpu_core_mask and cpu_cpu_mask for any CPU would be same unless the
number of sockets is different from the number of NUMA nodes.
One option is to reintroduce cpu_core_mask but use a slightly
different method to arrive at the cpu_core_mask. Previously each CPU's
chip-id would be compared with all other CPU's chip-id to verify if
both the CPUs were related at the chip level. Now if a CPU 'A' is
found related / (unrelated) to another CPU 'B', all the thread
siblings of 'A' and thread siblings of 'B' are automatically marked as
related / (unrelated).
Also if a platform doesn't support ibm,chip-id property, i.e its
cpu_to_chip_id returns -1, cpu_core_map holds a copy of
cpu_cpu_mask().
Fixes: 4ca234a9cbd7 ("powerpc/smp: Stop updating cpu_core_mask")
Reported-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210415120934.232271-2-srikar@linux.vnet.ibm.com
|
|
The sparse tool complains as follows:
arch/powerpc/kernel/smp.c:86:1: warning:
symbol '__pcpu_scope_cpu_coregroup_map' was not declared. Should it be static?
arch/powerpc/kernel/smp.c:125:1: warning:
symbol '__pcpu_scope_thread_group_l1_cache_map' was not declared. Should it be static?
arch/powerpc/kernel/smp.c:132:1: warning:
symbol '__pcpu_scope_thread_group_l2_cache_map' was not declared. Should it be static?
These symbols are not used outside of smp.c, so this
commit marks them static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210407125903.4139663-1-yukuai3@huawei.com
|
|
debugger_ipi_callback() is a local routine used as a NMI IPI handler and
does not need to be external.
It fixes this W=1 compile error :
../arch/powerpc/kernel/smp.c:579:6: error: no previous prototype for ‘debugger_ipi_callback’ [-Werror=missing-prototypes]
579 | void debugger_ipi_callback(struct pt_regs *regs)
| ^~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-10-clg@kaod.org
|
|
It fixes this W=1 compile error :
../arch/powerpc/kernel/smp.c:569:6: error: no previous prototype for ‘tick_broadcast’ [-Werror=missing-prototypes]
569 | void tick_broadcast(const struct cpumask *mask)
| ^~~~~~~~~~~~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-9-clg@kaod.org
|
|
It fixes this link warning:
WARNING: modpost: vmlinux.o(.text.unlikely+0x2d98): Section mismatch in reference from the function init_big_cores.isra.0() to the function .init.text:init_thread_group_cache_map()
The function init_big_cores.isra.0() references
the function __init init_thread_group_cache_map().
This is often because init_big_cores.isra.0 lacks a __init
annotation or the annotation of init_thread_group_cache_map is wrong.
Fixes: 425752c63b6f ("powerpc: Detect the presence of big-cores via "ibm, thread-groups"")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201221074154.403779-1-clg@kaod.org
|
|
On POWER systems, groups of threads within a core sharing the L2-cache
can be indicated by the "ibm,thread-groups" property array with the
identifier "2".
This patch adds support for detecting this, and when present, populate
the populating the cpu_l2_cache_mask of every CPU to the core-siblings
which share L2 with the CPU as specified in the by the
"ibm,thread-groups" property array.
On a platform with the following "ibm,thread-group" configuration
00000001 00000002 00000004 00000000
00000002 00000004 00000006 00000001
00000003 00000005 00000007 00000002
00000002 00000004 00000000 00000002
00000004 00000006 00000001 00000003
00000005 00000007
Without this patch, the sched-domain hierarchy for CPUs 0,1 would be
CPU0 attaching sched-domain(s):
domain-0: span=0,2,4,6 level=SMT
domain-1: span=0-7 level=CACHE
domain-2: span=0-15,24-39,48-55 level=MC
domain-3: span=0-55 level=DIE
CPU1 attaching sched-domain(s):
domain-0: span=1,3,5,7 level=SMT
domain-1: span=0-7 level=CACHE
domain-2: span=0-15,24-39,48-55 level=MC
domain-3: span=0-55 level=DIE
The CACHE domain at 0-7 is incorrect since the ibm,thread-groups
sub-array
[00000002 00000002 00000004
00000000 00000002 00000004 00000006
00000001 00000003 00000005 00000007]
indicates that L2 (Property "2") is shared only between the threads of a single
group. There are "2" groups of threads where each group contains "4"
threads each. The groups being {0,2,4,6} and {1,3,5,7}.
With this patch, the sched-domain hierarchy for CPUs 0,1 would be
CPU0 attaching sched-domain(s):
domain-0: span=0,2,4,6 level=SMT
domain-1: span=0-15,24-39,48-55 level=MC
domain-2: span=0-55 level=DIE
CPU1 attaching sched-domain(s):
domain-0: span=1,3,5,7 level=SMT
domain-1: span=0-15,24-39,48-55 level=MC
domain-2: span=0-55 level=DIE
The CACHE domain with span=0,2,4,6 for CPU 0 (span=1,3,5,7 for CPU 1
resp.) gets degenerated into the SMT domain. Furthermore, the
last-level-cache domain gets correctly set to the SMT sched-domain.
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1607596739-32439-5-git-send-email-ego@linux.vnet.ibm.com
|
|
init_thread_group_l1_cache_map() initializes the per-cpu cpumask
thread_group_l1_cache_map with the core-siblings which share L1 cache
with the CPU. Make this function generic to the cache-property (L1 or
L2) and update a suitable mask. This is a preparatory patch for the
next patch where we will introduce discovery of thread-groups that
share L2-cache.
No functional change.
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1607596739-32439-4-git-send-email-ego@linux.vnet.ibm.com
|
|
On platforms which have the "ibm,thread-groups" property, the per-cpu
variable cpu_l1_cache_map keeps a track of which group of threads
within the same core share the L1 cache, Instruction and Data flow.
This patch renames the variable to "thread_group_l1_cache_map" to make
it consistent with a subsequent patch which will introduce
thread_group_l2_cache_map.
This patch introduces no functional change.
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1607596739-32439-3-git-send-email-ego@linux.vnet.ibm.com
|
|
The "ibm,thread-groups" device-tree property is an array that is used
to indicate if groups of threads within a core share certain
properties. It provides details of which property is being shared by
which groups of threads. This array can encode information about
multiple properties being shared by different thread-groups within the
core.
Example: Suppose,
"ibm,thread-groups" = [1,2,4,8,10,12,14,9,11,13,15,2,2,4,8,10,12,14,9,11,13,15]
This can be decomposed up into two consecutive arrays:
a) [1,2,4,8,10,12,14,9,11,13,15]
b) [2,2,4,8,10,12,14,9,11,13,15]
where in,
a) provides information of Property "1" being shared by "2" groups,
each with "4" threads each. The "ibm,ppc-interrupt-server#s" of the
first group is {8,10,12,14} and the "ibm,ppc-interrupt-server#s" of
the second group is {9,11,13,15}. Property "1" is indicative of
the thread in the group sharing L1 cache, translation cache and
Instruction Data flow.
b) provides information of Property "2" being shared by "2" groups,
each group with "4" threads. The "ibm,ppc-interrupt-server#s" of
the first group is {8,10,12,14} and the
"ibm,ppc-interrupt-server#s" of the second group is
{9,11,13,15}. Property "2" indicates that the threads in each group
share the L2-cache.
The existing code assumes that the "ibm,thread-groups" encodes
information about only one property. Hence even on platforms which
encode information about multiple properties being shared by the
corresponding groups of threads, the current code will only pick the
first one. (In the above example, it will only consider
[1,2,4,8,10,12,14,9,11,13,15] but not [2,2,4,8,10,12,14,9,11,13,15]).
This patch extends the parsing support on platforms which encode
information about multiple properties being shared by the
corresponding groups of threads.
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1607596739-32439-2-git-send-email-ego@linux.vnet.ibm.com
|
|
The call to rcu_cpu_starting() in start_secondary() is not early
enough in the CPU-hotplug onlining process, which results in lockdep
splats as follows (with CONFIG_PROVE_RCU_LIST=y):
WARNING: suspicious RCU usage
-----------------------------
kernel/locking/lockdep.c:3497 RCU-list traversed in non-reader section!!
other info that might help us debug this:
RCU used illegally from offline CPU!
rcu_scheduler_active = 1, debug_locks = 1
no locks held by swapper/1/0.
Call Trace:
dump_stack+0xec/0x144 (unreliable)
lockdep_rcu_suspicious+0x128/0x14c
__lock_acquire+0x1060/0x1c60
lock_acquire+0x140/0x5f0
_raw_spin_lock_irqsave+0x64/0xb0
clockevents_register_device+0x74/0x270
register_decrementer_clockevent+0x94/0x110
start_secondary+0x134/0x800
start_secondary_prolog+0x10/0x14
This is avoided by adding a call to rcu_cpu_starting() near the
beginning of the start_secondary() function. Note that the
raw_smp_processor_id() is required in order to avoid calling into
lockdep before RCU has declared the CPU to be watched for readers.
It's safe to call rcu_cpu_starting() in the arch code as well as later
in generic code, as explained by Paul:
It uses a per-CPU variable so that RCU pays attention only to the
first call to rcu_cpu_starting() if there is more than one of them.
This is even intentional, due to there being a generic
arch-independent call to rcu_cpu_starting() in
notify_cpu_starting().
So multiple calls to rcu_cpu_starting() are fine by design.
Fixes: 4d004099a668 ("lockdep: Fix lockdep recursion")
Signed-off-by: Qian Cai <cai@redhat.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
[mpe: Add Fixes tag, reword slightly & expand change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201028182334.13466-1-cai@redhat.com
|
