diff options
| -rw-r--r-- | Documentation/arm/OMAP/README | 7 | ||||
| -rw-r--r-- | arch/arm/boot/dts/am57xx-beagle-x15.dts | 3 | ||||
| -rw-r--r-- | drivers/memory/Kconfig | 12 | ||||
| -rw-r--r-- | drivers/memory/omap-gpmc.c | 2 |
4 files changed, 19 insertions, 5 deletions
diff --git a/Documentation/arm/OMAP/README b/Documentation/arm/OMAP/README new file mode 100644 index 000000000000..75645c45d14a --- /dev/null +++ b/Documentation/arm/OMAP/README @@ -0,0 +1,7 @@ +This file contains documentation for running mainline +kernel on omaps. + +KERNEL NEW DEPENDENCIES +v4.3+ Update is needed for custom .config files to make sure + CONFIG_REGULATOR_PBIAS is enabled for MMC1 to work + properly. diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 568adf5efde0..d55e3ea89fda 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -402,11 +402,12 @@ /* SMPS9 unused */ ldo1_reg: ldo1 { - /* VDD_SD */ + /* VDD_SD / VDDSHV8 */ regulator-name = "ldo1"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; + regulator-always-on; }; ldo2_reg: ldo2 { diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig index c6a644b22af4..6f3154613dc7 100644 --- a/drivers/memory/Kconfig +++ b/drivers/memory/Kconfig @@ -58,12 +58,18 @@ config OMAP_GPMC memory drives like NOR, NAND, OneNAND, SRAM. config OMAP_GPMC_DEBUG - bool + bool "Enable GPMC debug output and skip reset of GPMC during init" depends on OMAP_GPMC help Enables verbose debugging mostly to decode the bootloader provided - timings. Enable this during development to configure devices - connected to the GPMC bus. + timings. To preserve the bootloader provided timings, the reset + of GPMC is skipped during init. Enable this during development to + configure devices connected to the GPMC bus. + + NOTE: In addition to matching the register setup with the bootloader + you also need to match the GPMC FCLK frequency used by the + bootloader or else the GPMC timings won't be identical with the + bootloader timings. config MVEBU_DEVBUS bool "Marvell EBU Device Bus Controller" diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c index 32ac049f2bc4..6515dfc2b805 100644 --- a/drivers/memory/omap-gpmc.c +++ b/drivers/memory/omap-gpmc.c @@ -696,7 +696,6 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t, int div; u32 l; - gpmc_cs_show_timings(cs, "before gpmc_cs_set_timings"); div = gpmc_calc_divider(t->sync_clk); if (div < 0) return div; @@ -1988,6 +1987,7 @@ static int gpmc_probe_generic_child(struct platform_device *pdev, if (ret < 0) goto err; + gpmc_cs_show_timings(cs, "before gpmc_cs_program_settings"); ret = gpmc_cs_program_settings(cs, &gpmc_s); if (ret < 0) goto err; |