diff options
56 files changed, 787 insertions, 534 deletions
diff --git a/Documentation/arm64/tagged-pointers.txt b/Documentation/arm64/tagged-pointers.txt index 264e9841563a..d9995f1f51b3 100644 --- a/Documentation/arm64/tagged-pointers.txt +++ b/Documentation/arm64/tagged-pointers.txt @@ -18,17 +18,17 @@ this byte for application use, with the following caveats: parameters containing user virtual addresses *must* have their top byte cleared before trapping to the kernel. - (2) Tags are not guaranteed to be preserved when delivering - signals. This means that signal handlers in applications - making use of tags cannot rely on the tag information for - user virtual addresses being maintained for fields inside - siginfo_t. One exception to this rule is for signals raised - in response to debug exceptions, where the tag information + (2) Non-zero tags are not preserved when delivering signals. + This means that signal handlers in applications making use + of tags cannot rely on the tag information for user virtual + addresses being maintained for fields inside siginfo_t. + One exception to this rule is for signals raised in response + to watchpoint debug exceptions, where the tag information will be preserved. (3) Special care should be taken when using tagged pointers, since it is likely that C compilers will not hazard two - addresses differing only in the upper bits. + virtual addresses differing only in the upper byte. The architecture prevents the use of a tagged PC, so the upper byte will be set to a sign-extension of bit 55 on exception return. diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index cc0f1fb61753..e95af3f5433b 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -183,6 +183,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ am335x-evm.dtb \ am335x-evmsk.dtb \ am335x-bone.dtb \ + am335x-boneblack.dtb \ am3517-evm.dtb \ am3517_mt_ventoux.dtb \ am43x-epos-evm.dtb diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi new file mode 100644 index 000000000000..2f66deda9f5c --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -0,0 +1,262 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/ { + model = "TI AM335x BeagleBone"; + compatible = "ti,am335x-bone", "ti,am33xx"; + + cpus { + cpu@0 { + cpu0-supply = <&dcdc2_reg>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + am33xx_pinmux: pinmux@44e10800 { + pinctrl-names = "default"; + pinctrl-0 = <&clkout2_pin>; + + user_leds_s0: user_leds_s0 { + pinctrl-single,pins = < + 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ + 0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */ + 0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ + 0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */ + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + clkout2_pin: pinmux_clkout2_pin { + pinctrl-single,pins = < + 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ + 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */ + 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ + 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ + 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ + 0x13c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ + 0x140 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + }; + + ocp { + uart0: serial@44e09000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + + status = "okay"; + }; + + musb: usb@47400000 { + status = "okay"; + + control@44e10000 { + status = "okay"; + }; + + usb-phy@47401300 { + status = "okay"; + }; + + usb-phy@47401b00 { + status = "okay"; + }; + + usb@47401000 { + status = "okay"; + }; + + usb@47401800 { + status = "okay"; + dr_mode = "host"; + }; + + dma-controller@07402000 { + status = "okay"; + }; + }; + + i2c0: i2c@44e0b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + status = "okay"; + clock-frequency = <400000>; + + tps: tps@24 { + reg = <0x24>; + }; + + }; + }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_s0>; + + compatible = "gpio-leds"; + + led@2 { + label = "beaglebone:green:heartbeat"; + gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led@3 { + label = "beaglebone:green:mmc0"; + gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led@4 { + label = "beaglebone:green:usr2"; + gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@5 { + label = "beaglebone:green:usr3"; + gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; +}; + +/include/ "tps65217.dtsi" + +&tps { + regulators { + dcdc1_reg: regulator@0 { + regulator-always-on; + }; + + dcdc2_reg: regulator@1 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1325000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3_reg: regulator@2 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: regulator@3 { + regulator-always-on; + }; + + ldo2_reg: regulator@4 { + regulator-always-on; + }; + + ldo3_reg: regulator@5 { + regulator-always-on; + }; + + ldo4_reg: regulator@6 { + regulator-always-on; + }; + }; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "mii"; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <1>; + phy-mode = "mii"; +}; + +&mac { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; +}; diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index d318987d44a1..7993c489982c 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -8,258 +8,4 @@ /dts-v1/; #include "am33xx.dtsi" - -/ { - model = "TI AM335x BeagleBone"; - compatible = "ti,am335x-bone", "ti,am33xx"; - - cpus { - cpu@0 { - cpu0-supply = <&dcdc2_reg>; - }; - }; - - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; /* 256 MB */ - }; - - am33xx_pinmux: pinmux@44e10800 { - pinctrl-names = "default"; - pinctrl-0 = <&clkout2_pin>; - - user_leds_s0: user_leds_s0 { - pinctrl-single,pins = < - 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ - 0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */ - 0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ - 0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */ - >; - }; - - i2c0_pins: pinmux_i2c0_pins { - pinctrl-single,pins = < - 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ - >; - }; - - uart0_pins: pinmux_uart0_pins { - pinctrl-single,pins = < - 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ - >; - }; - - clkout2_pin: pinmux_clkout2_pin { - pinctrl-single,pins = < - 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ - >; - }; - - cpsw_default: cpsw_default { - pinctrl-single,pins = < - /* Slave 1 */ - 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ - 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ - 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ - 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ - 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ - 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ - 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ - 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */ - 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ - 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ - 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ - 0x13c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ - 0x140 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ - >; - }; - - cpsw_sleep: cpsw_sleep { - pinctrl-single,pins = < - /* Slave 1 reset value */ - 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) - >; - }; - - davinci_mdio_default: davinci_mdio_default { - pinctrl-single,pins = < - /* MDIO */ - 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ - >; - }; - - davinci_mdio_sleep: davinci_mdio_sleep { - pinctrl-single,pins = < - /* MDIO reset value */ - 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) - 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) - >; - }; - }; - - ocp { - uart0: serial@44e09000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; - - status = "okay"; - }; - - musb: usb@47400000 { - status = "okay"; - - control@44e10000 { - status = "okay"; - }; - - usb-phy@47401300 { - status = "okay"; - }; - - usb-phy@47401b00 { - status = "okay"; - }; - - usb@47401000 { - status = "okay"; - }; - - usb@47401800 { - status = "okay"; - dr_mode = "host"; - }; - - dma-controller@07402000 { - status = "okay"; - }; - }; - - i2c0: i2c@44e0b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; - - status = "okay"; - clock-frequency = <400000>; - - tps: tps@24 { - reg = <0x24>; - }; - - }; - }; - - leds { - pinctrl-names = "default"; - pinctrl-0 = <&user_leds_s0>; - - compatible = "gpio-leds"; - - led@2 { - label = "beaglebone:green:heartbeat"; - gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - default-state = "off"; - }; - - led@3 { - label = "beaglebone:green:mmc0"; - gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc0"; - default-state = "off"; - }; - - led@4 { - label = "beaglebone:green:usr2"; - gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - - led@5 { - label = "beaglebone:green:usr3"; - gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - }; -}; - -/include/ "tps65217.dtsi" - -&tps { - regulators { - dcdc1_reg: regulator@0 { - regulator-always-on; - }; - - dcdc2_reg: regulator@1 { - /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ - regulator-name = "vdd_mpu"; - regulator-min-microvolt = <925000>; - regulator-max-microvolt = <1325000>; - regulator-boot-on; - regulator-always-on; - }; - - dcdc3_reg: regulator@2 { - /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ - regulator-name = "vdd_core"; - regulator-min-microvolt = <925000>; - regulator-max-microvolt = <1150000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo1_reg: regulator@3 { - regulator-always-on; - }; - - ldo2_reg: regulator@4 { - regulator-always-on; - }; - - ldo3_reg: regulator@5 { - regulator-always-on; - }; - - ldo4_reg: regulator@6 { - regulator-always-on; - }; - }; -}; - -&cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; - phy-mode = "mii"; -}; - -&cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; - phy-mode = "mii"; -}; - -&mac { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&cpsw_default>; - pinctrl-1 = <&cpsw_sleep>; - -}; - -&davinci_mdio { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&davinci_mdio_default>; - pinctrl-1 = <&davinci_mdio_sleep>; -}; +#include "am335x-bone-common.dtsi" diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts new file mode 100644 index 000000000000..197cadf72d2c --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index c037c223619a..b7a1c6d950b9 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -187,7 +187,7 @@ compatible = "fsl,imx27-cspi"; reg = <0x1000e000 0x1000>; interrupts = <16>; - clocks = <&clks 53>, <&clks 53>; + clocks = <&clks 53>, <&clks 60>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -198,7 +198,7 @@ compatible = "fsl,imx27-cspi"; reg = <0x1000f000 0x1000>; interrupts = <15>; - clocks = <&clks 52>, <&clks 52>; + clocks = <&clks 52>, <&clks 60>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -309,7 +309,7 @@ compatible = "fsl,imx27-cspi"; reg = <0x10017000 0x1000>; interrupts = <6>; - clocks = <&clks 51>, <&clks 51>; + clocks = <&clks 51>, <&clks 60>; clock-names = "ipg", "per"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index a85abb424c34..54cee6517902 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -474,7 +474,7 @@ compatible = "fsl,imx51-pata", "fsl,imx27-pata"; reg = <0x83fe0000 0x4000>; interrupts = <70>; - clocks = <&clks 161>; + clocks = <&clks 172>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6q-pinfunc.h b/arch/arm/boot/dts/imx6q-pinfunc.h index c0e38a45e4bb..9bbe82bdee41 100644 --- a/arch/arm/boot/dts/imx6q-pinfunc.h +++ b/arch/arm/boot/dts/imx6q-pinfunc.h @@ -207,8 +207,8 @@ #define MX6QDL_PAD_EIM_D29__ECSPI4_SS0 0x0c8 0x3dc 0x824 0x2 0x1 #define MX6QDL_PAD_EIM_D29__UART2_RTS_B 0x0c8 0x3dc 0x924 0x4 0x1 #define MX6QDL_PAD_EIM_D29__UART2_CTS_B 0x0c8 0x3dc 0x000 0x4 0x0 -#define MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x0c4 0x3dc 0x000 0x4 0x0 -#define MX6QDL_PAD_EIM_D29__UART2_DTE_CTS_B 0x0c4 0x3dc 0x924 0x4 0x1 +#define MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x0c8 0x3dc 0x000 0x4 0x0 +#define MX6QDL_PAD_EIM_D29__UART2_DTE_CTS_B 0x0c8 0x3dc 0x924 0x4 0x1 #define MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x0c8 0x3dc 0x000 0x5 0x0 #define MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC 0x0c8 0x3dc 0x8e4 0x6 0x0 #define MX6QDL_PAD_EIM_D29__IPU1_DI0_PIN14 0x0c8 0x3dc 0x000 0x7 0x0 diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index afdb16417d4e..0c514dc8460c 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -11,7 +11,7 @@ / { model = "TI OMAP3 BeagleBoard xM"; - compatible = "ti,omap3-beagle-xm, ti,omap3-beagle", "ti,omap3"; + compatible = "ti,omap3-beagle-xm", "ti,omap3-beagle", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index bc48b114eae6..2326d11462a5 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -48,6 +48,15 @@ >; }; + mcbsp2_pins: pinmux_mcbsp2_pins { + pinctrl-single,pins = < + 0x10c (PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */ + 0x10e (PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx.mcbsp2_clkx */ + 0x110 (PIN_INPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2.dr */ + 0x112 (PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx.mcbsp2_dx */ + >; + }; + mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < 0x114 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ @@ -93,6 +102,11 @@ clock-frequency = <400000>; }; +&mcbsp2 { + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp2_pins>; +}; + &mmc1 { pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index faa95b5b242e..814ab67c8c29 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -107,6 +107,19 @@ */ clock-frequency = <19200000>; }; + + /* regulator for wl12xx on sdio5 */ + wl12xx_vmmc: wl12xx_vmmc { + pinctrl-names = "default"; + pinctrl-0 = <&wl12xx_gpio>; + compatible = "regulator-fixed"; + regulator-name = "vwl1271"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio2 11 0>; + startup-delay-us = <70000>; + enable-active-high; + }; }; &omap4_pmx_wkup { @@ -235,6 +248,33 @@ 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */ >; }; + + /* + * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP + * REVISIT: Are the pull-ups needed for GPIO 48 and 49? + */ + wl12xx_gpio: pinmux_wl12xx_gpio { + pinctrl-single,pins = < + 0x26 (PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 */ + 0x2c (PIN_OUTPUT | MUX_MODE3) /* gpmc_a22.gpio_46 */ + 0x30 (PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a24.gpio_48 */ + 0x32 (PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a25.gpio_49 */ + >; + }; + + /* wl12xx GPIO inputs and SDIO pins */ + wl12xx_pins: pinmux_wl12xx_pins { + pinctrl-single,pins = < + 0x38 (PIN_INPUT | MUX_MODE3) /* gpmc_ncs2.gpio_52 */ + 0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */ + 0x108 (PIN_OUTPUT | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */ + 0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */ + 0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */ + 0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */ + 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */ + 0x112 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */ + >; + }; }; &i2c1 { @@ -314,8 +354,12 @@ }; &mmc5 { - ti,non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&wl12xx_pins>; + vmmc-supply = <&wl12xx_vmmc>; + non-removable; bus-width = <4>; + cap-power-off-card; }; &emif1 { diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 7951b4ea500a..4f78380ecdb8 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -140,6 +140,19 @@ "DMic", "Digital Mic", "Digital Mic", "Digital Mic1 Bias"; }; + + /* regulator for wl12xx on sdio5 */ + wl12xx_vmmc: wl12xx_vmmc { + pinctrl-names = "default"; + pinctrl-0 = <&wl12xx_gpio>; + compatible = "regulator-fixed"; + regulator-name = "vwl1271"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio2 22 0>; + startup-delay-us = <70000>; + enable-active-high; + }; }; &omap4_pmx_wkup { @@ -295,6 +308,26 @@ 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ >; }; + + /* wl12xx GPIO output for WLAN_EN */ + wl12xx_gpio: pinmux_wl12xx_gpio { + pinctrl-single,pins = < + 0x3c (PIN_OUTPUT | MUX_MODE3) /* gpmc_nwp.gpio_54 */ + >; + }; + + /* wl12xx GPIO inputs and SDIO pins */ + wl12xx_pins: pinmux_wl12xx_pins { + pinctrl-single,pins = < + 0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */ + 0x108 (PIN_OUTPUT | MUX_MODE3) /* sdmmc5_clk.sdmmc5_clk */ + 0x10a (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_cmd.sdmmc5_cmd */ + 0x10c (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat0.sdmmc5_dat0 */ + 0x10e (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat1.sdmmc5_dat1 */ + 0x110 (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat2.sdmmc5_dat2 */ + 0x112 (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat3.sdmmc5_dat3 */ + >; + }; }; &i2c1 { @@ -420,8 +453,12 @@ }; &mmc5 { + pinctrl-names = "default"; + pinctrl-0 = <&wl12xx_pins>; + vmmc-supply = <&wl12xx_vmmc>; + non-removable; bus-width = <4>; - ti,non-removable; + cap-power-off-card; }; &emif1 { diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 07be2cd7b318..7cdea1bfea09 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -637,7 +637,7 @@ omap_dwc3@4a020000 { compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss"; - reg = <0x4a020000 0x1000>; + reg = <0x4a020000 0x10000>; interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <1>; @@ -645,17 +645,18 @@ ranges; dwc3@4a030000 { compatible = "snps,dwc3"; - reg = <0x4a030000 0x1000>; + reg = <0x4a030000 0x10000>; interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; usb-phy = <&usb2_phy>, <&usb3_phy>; tx-fifo-resize; }; }; - ocp2scp { + ocp2scp@4a080000 { compatible = "ti,omap-ocp2scp"; #address-cells = <1>; #size-cells = <1>; + reg = <0x4a080000 0x20>; ranges; ti,hwmods = "ocp2scp1"; usb2_phy: usb2phy@4a084000 { diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 6e572c64cf5a..f3935b46df29 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -36,6 +36,7 @@ CONFIG_ARCH_TEGRA_114_SOC=y CONFIG_TEGRA_PCI=y CONFIG_TEGRA_EMC_SCALING_ENABLE=y CONFIG_ARCH_U8500=y +CONFIG_MACH_HREFV60=y CONFIG_MACH_SNOWBALL=y CONFIG_MACH_UX500_DT=y CONFIG_ARCH_VEXPRESS=y @@ -46,6 +47,7 @@ CONFIG_ARCH_ZYNQ=y CONFIG_SMP=y CONFIG_HIGHPTE=y CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_NET=y CONFIG_UNIX=y CONFIG_INET=y diff --git a/arch/arm/mach-imx/clk-fixup-mux.c b/arch/arm/mach-imx/clk-fixup-mux.c index deb4b8093b30..0d40b35c557c 100644 --- a/arch/arm/mach-imx/clk-fixup-mux.c +++ b/arch/arm/mach-imx/clk-fixup-mux.c @@ -90,6 +90,7 @@ struct clk *imx_clk_fixup_mux(const char *name, void __iomem *reg, init.ops = &clk_fixup_mux_ops; init.parent_names = parents; init.num_parents = num_parents; + init.flags = 0; fixup_mux->mux.reg = reg; fixup_mux->mux.shift = shift; diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index 1a56a3319997..d9094b9a5185 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -397,7 +397,7 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, mx51_spdif_xtal_sel, ARRAY_SIZE(mx51_spdif_xtal_sel)); clk[spdif1_sel] = imx_clk_mux("spdif1_sel", MXC_CCM_CSCMR2, 2, 2, spdif_sel, ARRAY_SIZE(spdif_sel)); - clk[spdif1_pred] = imx_clk_divider("spdif1_podf", "spdif1_sel", MXC_CCM_CDCDR, 16, 3); + clk[spdif1_pred] = imx_clk_divider("spdif1_pred", "spdif1_sel", MXC_CCM_CDCDR, 16, 3); clk[spdif1_podf] = imx_clk_divider("spdif1_podf", "spdif1_pred", MXC_CCM_CDCDR, 9, 6); clk[spdif1_com_sel] = imx_clk_mux("spdif1_com_sel", MXC_CCM_CSCMR2, 5, 1, mx51_spdif1_com_sel, ARRAY_SIZE(mx51_spdif1_com_sel)); diff --git a/arch/arm/mach-imx/system.c b/arch/arm/mach-imx/system.c index 64ff37ea72b1..80c177c36c5f 100644 --- a/arch/arm/mach-imx/system.c +++ b/arch/arm/mach-imx/system.c @@ -117,6 +117,17 @@ void __init imx_init_l2cache(void) /* Configure the L2 PREFETCH and POWER registers */ val = readl_relaxed(l2x0_base + L2X0_PREFETCH_CTRL); val |= 0x70800000; + /* + * The L2 cache controller(PL310) version on the i.MX6D/Q is r3p1-50rel0 + * The L2 cache controller(PL310) version on the i.MX6DL/SOLO/SL is r3p2 + * But according to ARM PL310 errata: 752271 + * ID: 752271: Double linefill feature can cause data corruption + * Fault Status: Present in: r3p0, r3p1, r3p1-50rel0. Fixed in r3p2 + * Workaround: The only workaround to this erratum is to disable the + * double linefill feature. This is the default behavior. + */ + if (cpu_is_imx6q()) + val &= ~(1 << 30 | 1 << 23); writel_relaxed(val, l2x0_base + L2X0_PREFETCH_CTRL); val = L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN; writel_relaxed(val, l2x0_base + L2X0_POWER_CTRL); diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c index 1d5b5290d2af..b237950eb8a3 100644 --- a/arch/arm/mach-omap2/cclock44xx_data.c +++ b/arch/arm/mach-omap2/cclock44xx_data.c @@ -1632,7 +1632,7 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "auxclk5_src_ck", &auxclk5_src_ck), CLK(NULL, "auxclk5_ck", &auxclk5_ck), CLK(NULL, "auxclkreq5_ck", &auxclkreq5_ck), - CLK("omap-gpmc", "fck", &dummy_ck), + CLK("50000000.gpmc", "fck", &dummy_ck), CLK("omap_i2c.1", "ick", &dummy_ck), CLK("omap_i2c.2", "ick", &dummy_ck), CLK("omap_i2c.3", "ick", &dummy_ck), diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index c443f2e97e10..4c8982ae9529 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -143,7 +143,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev, * Call idle CPU cluster PM exit notifier chain * to restore GIC and wakeupgen context. */ - if ((cx->mpu_state == PWRDM_POWER_RET) && + if (dev->cpu == 0 && (cx->mpu_state == PWRDM_POWER_RET) && (cx->mpu_logic_state == PWRDM_POWER_OFF)) cpu_cluster_pm_exit(); diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 9f4795aff48a..579697adaae7 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -1491,8 +1491,8 @@ static int gpmc_probe_generic_child(struct platform_device *pdev, */ ret = gpmc_cs_remap(cs, res.start); if (ret < 0) { - dev_err(&pdev->dev, "cannot remap GPMC CS %d to 0x%x\n", - cs, res.start); + dev_err(&pdev->dev, "cannot remap GPMC CS %d to %pa\n", + cs, &res.start); goto err; } diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c index c53609f46294..be271f1d585b 100644 --- a/arch/arm/mach-omap2/mux34xx.c +++ b/arch/arm/mach-omap2/mux34xx.c @@ -620,7 +620,7 @@ static struct omap_mux __initdata omap3_muxmodes[] = { "uart1_rts", "ssi1_flag_tx", NULL, NULL, "gpio_149", NULL, NULL, "safe_mode"), _OMAP3_MUXENTRY(UART1_RX, 151, - "uart1_rx", "ss1_wake_tx", "mcbsp1_clkr", "mcspi4_clk", + "uart1_rx", "ssi1_wake_tx", "mcbsp1_clkr", "mcspi4_clk", "gpio_151", NULL, NULL, "safe_mode"), _OMAP3_MUXENTRY(UART1_TX, 148, "uart1_tx", "ssi1_dat_tx", NULL, NULL, diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 8708b2a9da45..891211093295 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -1,5 +1,5 @@ /* - * OMAP4 SMP source file. It contains platform specific fucntions + * OMAP4 SMP source file. It contains platform specific functions * needed for the linux smp kernel. * * Copyright (C) 2009 Texas Instruments, Inc. diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index f99f68e1e85b..b69dd9abb50a 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -158,7 +158,7 @@ static int omap_device_build_from_dt(struct platform_device *pdev) } od = omap_device_alloc(pdev, hwmods, oh_cnt); - if (!od) { + if (IS_ERR(od)) { dev_err(&pdev->dev, "Cannot allocate omap_device for :%s\n", oh_name); ret = PTR_ERR(od); diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index 612a45689770..7fb96ebdc0fb 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -289,7 +289,7 @@ static void collie_flash_exit(void) } static struct flash_platform_data collie_flash_data = { - .map_name = "cfi_probe", + .map_name = "jedec_probe", .init = collie_flash_init, .set_vpp = collie_set_vpp, .exit = collie_flash_exit, diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig index a85adcd00882..a1659863bfd5 100644 --- a/arch/arm/mach-u300/Kconfig +++ b/arch/arm/mach-u300/Kconfig @@ -1,7 +1,3 @@ -menu "ST-Ericsson AB U300/U335 Platform" - -comment "ST-Ericsson Mobile Platform Products" - config ARCH_U300 bool "ST-Ericsson U300 Series" if ARCH_MULTI_V5 depends on MMU @@ -25,7 +21,9 @@ config ARCH_U300 help Support for ST-Ericsson U300 series mobile platforms. -comment "ST-Ericsson U300/U335 Feature Selections" +if ARCH_U300 + +menu "ST-Ericsson AB U300/U335 Platform" config MACH_U300 depends on ARCH_U300 @@ -53,3 +51,5 @@ config MACH_U300_SPIDUMMY SPI framework and ARM PL022 support. endmenu + +endif diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c index 82ccf1d98735..264f894c0e3d 100644 --- a/arch/arm/mach-ux500/cache-l2x0.c +++ b/arch/arm/mach-ux500/cache-l2x0.c @@ -69,6 +69,7 @@ static int __init ux500_l2x0_init(void) * some SMI service available. */ outer_cache.disable = NULL; + outer_cache.set_debug = NULL; return 0; } diff --git a/arch/arm64/include/asm/hwcap.h b/arch/arm64/include/asm/hwcap.h index 6d4482fa35bc..e2950b098e76 100644 --- a/arch/arm64/include/asm/hwcap.h +++ b/arch/arm64/include/asm/hwcap.h @@ -43,6 +43,6 @@ COMPAT_HWCAP_VFPv3|COMPAT_HWCAP_VFPv4|\ COMPAT_HWCAP_NEON|COMPAT_HWCAP_IDIV) -extern unsigned int elf_hwcap; +extern unsigned long elf_hwcap; #endif #endif diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c index 57fb55c44c90..7ae8a1f00c3c 100644 --- a/arch/arm64/kernel/process.c +++ b/arch/arm64/kernel/process.c @@ -143,15 +143,26 @@ void machine_restart(char *cmd) void __show_regs(struct pt_regs *regs) { - int i; + int i, top_reg; + u64 lr, sp; + + if (compat_user_mode(regs)) { + lr = regs->compat_lr; + sp = regs->compat_sp; + top_reg = 12; + } else { + lr = regs->regs[30]; + sp = regs->sp; + top_reg = 29; + } show_regs_print_info(KERN_DEFAULT); print_symbol("PC is at %s\n", instruction_pointer(regs)); - print_symbol("LR is at %s\n", regs->regs[30]); + print_symbol("LR is at %s\n", lr); printk("pc : [<%016llx>] lr : [<%016llx>] pstate: %08llx\n", - regs->pc, regs->regs[30], regs->pstate); - printk("sp : %016llx\n", regs->sp); - for (i = 29; i >= 0; i--) { + regs->pc, lr, regs->pstate); + printk("sp : %016llx\n", sp); + for (i = top_reg; i >= 0; i--) { printk("x%-2d: %016llx ", i, regs->regs[i]); if (i % 2 == 0) printk("\n"); diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c index 12ad8f3d0cfd..055cfb80e05c 100644 --- a/arch/arm64/kernel/setup.c +++ b/arch/arm64/kernel/setup.c @@ -57,7 +57,7 @@ unsigned int processor_id; EXPORT_SYMBOL(processor_id); -unsigned int elf_hwcap __read_mostly; +unsigned long elf_hwcap __read_mostly; EXPORT_SYMBOL_GPL(elf_hwcap); static const char *cpu_name; diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c index 6d6acf153bff..c23751b06120 100644 --- a/arch/arm64/mm/fault.c +++ b/arch/arm64/mm/fault.c @@ -130,7 +130,7 @@ static void __do_user_fault(struct task_struct *tsk, unsigned long addr, force_sig_info(sig, &si, tsk); } -void do_bad_area(unsigned long addr, unsigned int esr, struct pt_regs *regs) +static void do_bad_area(unsigned long addr, unsigned int esr, struct pt_regs *regs) { struct task_struct *tsk = current; struct mm_struct *mm = tsk->active_mm; diff --git a/drivers/mailbox/mailbox-omap2.c b/drivers/mailbox/mailbox-omap2.c index eba380d7b17f..42d2b893ea67 100644 --- a/drivers/mailbox/mailbox-omap2.c +++ b/drivers/mailbox/mailbox-omap2.c @@ -325,7 +325,6 @@ static int omap2_mbox_remove(struct platform_device *pdev) kfree(privblk); kfree(mboxblk); kfree(list); - platform_set_drvdata(pdev, NULL); return 0; } diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index 5db900d917f9..dd03dfdfb0d6 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -1236,7 +1236,6 @@ static int pxa3xx_nand_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_OF static struct of_device_id pxa3xx_nand_dt_ids[] = { { .compatible = "marvell,pxa3xx-nand", @@ -1284,12 +1283,6 @@ static int pxa3xx_nand_probe_dt(struct platform_device *pdev) return 0; } -#else -static inline int pxa3xx_nand_probe_dt(struct platform_device *pdev) -{ - return 0; -} -#endif static int pxa3xx_nand_probe(struct platform_device *pdev) { diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c index 874188ba06f7..25377e547f9b 100644 --- a/drivers/net/can/slcan.c +++ b/drivers/net/can/slcan.c @@ -76,6 +76,10 @@ MODULE_PARM_DESC(maxdev, "Maximum number of slcan interfaces"); /* maximum rx buffer len: extended CAN frame with timestamp */ #define SLC_MTU (sizeof("T1111222281122334455667788EA5F\r")+1) +#define SLC_CMD_LEN 1 +#define SLC_SFF_ID_LEN 3 +#define SLC_EFF_ID_LEN 8 + struct slcan { int magic; @@ -142,47 +146,63 @@ static void slc_bump(struct slcan *sl) { struct sk_buff *skb; struct can_frame cf; - int i, dlc_pos, tmp; - unsigned long ultmp; - char cmd = sl->rbuff[0]; - - if ((cmd != 't') && (cmd != 'T') && (cmd != 'r') && (cmd != 'R')) + int i, tmp; + u32 tmpid; + char *cmd = sl->rbuff; + + cf.can_id = 0; + + switch (*cmd) { + case 'r': + cf.can_id = CAN_RTR_FLAG; + /* fallthrough */ + case 't': + /* store dlc ASCII value and terminate SFF CAN ID string */ + cf.can_dlc = sl->rbuff[SLC_CMD_LEN + SLC_SFF_ID_LEN]; + sl->rbuff[SLC_CMD_LEN + SLC_SFF_ID_LEN] = 0; + /* point to payload data behind the dlc */ + cmd += SLC_CMD_LEN + SLC_SFF_ID_LEN + 1; + break; + case 'R': + cf.can_id = CAN_RTR_FLAG; + /* fallthrough */ + case 'T': + cf.can_id |= CAN_EFF_FLAG; + /* store dlc ASCII value and terminate EFF CAN ID string */ + cf.can_dlc = sl->rbuff[SLC_CMD_LEN + SLC_EFF_ID_LEN]; + sl->rbuff[SLC_CMD_LEN + SLC_EFF_ID_LEN] = 0; + /* point to payload data behind the dlc */ + cmd += SLC_CMD_LEN + SLC_EFF_ID_LEN + 1; + break; + default: return; + } - if (cmd & 0x20) /* tiny chars 'r' 't' => standard frame format */ - dlc_pos = 4; /* dlc position tiiid */ - else - dlc_pos = 9; /* dlc position Tiiiiiiiid */ - - if (!((sl->rbuff[dlc_pos] >= '0') && (sl->rbuff[dlc_pos] < '9'))) + if (kstrtou32(sl->rbuff + SLC_CMD_LEN, 16, &tmpid)) return; - cf.can_dlc = sl->rbuff[dlc_pos] - '0'; /* get can_dlc from ASCII val */ + cf.can_id |= tmpid; - sl->rbuff[dlc_pos] = 0; /* terminate can_id string */ - - if (kstrtoul(sl->rbuff+1, 16, &ultmp)) + /* get can_dlc from sanitized ASCII value */ + if (cf.can_dlc >= '0' && cf.can_dlc < '9') + cf.can_dlc -= '0'; + else return; - cf.can_id = ultmp; - - if (!(cmd & 0x20)) /* NO tiny chars => extended frame format */ - cf.can_id |= CAN_EFF_FLAG; - - if ((cmd | 0x20) == 'r') /* RTR frame */ - cf.can_id |= CAN_RTR_FLAG; - *(u64 *) (&cf.data) = 0; /* clear payload */ - for (i = 0, dlc_pos++; i < cf.can_dlc; i++) { - tmp = hex_to_bin(sl->rbuff[dlc_pos++]); - if (tmp < 0) - return; - cf.data[i] = (tmp << 4); - tmp = hex_to_bin(sl->rbuff[dlc_pos++]); - if (tmp < 0) - return; - cf.data[i] |= tmp; + /* RTR frames may have a dlc > 0 but they never have any data bytes */ + if (!(cf.can_id & CAN_RTR_FLAG)) { + for (i = 0; i < cf.can_dlc; i++) { + tmp = hex_to_bin(*cmd++); + if (tmp < 0) + return; + cf.data[i] = (tmp << 4); + tmp = hex_to_bin(*cmd++); + if (tmp < 0) + return; + cf.data[i] |= tmp; + } } skb = dev_alloc_skb(sizeof(struct can_frame) + @@ -209,7 +229,6 @@ static void slc_bump(struct slcan *sl) /* parse tty input stream */ static void slcan_unesc(struct slcan *sl, unsigned char s) { - if ((s == '\r') || (s == '\a')) { /* CR or BEL ends the pdu */ if (!test_and_clear_bit(SLF_ERROR, &sl->flags) && (sl->rcount > 4)) { @@ -236,27 +255,46 @@ static void slcan_unesc(struct slcan *sl, unsigned char s) /* Encapsulate one can_frame and stuff into a TTY queue. */ static void slc_encaps(struct slcan *sl, struct can_frame *cf) { - int actual, idx, i; - char cmd; + int actual, i; + unsigned char *pos; + unsigned char *endpos; + canid_t id = cf->can_id; + + pos = sl->xbuff; if (cf->can_id & CAN_RTR_FLAG) - cmd = 'R'; /* becomes 'r' in standard frame format */ + *pos = 'R'; /* becomes 'r' in standard frame format (SFF) */ else - cmd = 'T'; /* becomes 't' in standard frame format */ + *pos = 'T'; /* becomes 't' in standard frame format (SSF) */ - if (cf->can_id & CAN_EFF_FLAG) - sprintf(sl->xbuff, "%c%08X%d", cmd, - cf->can_id & CAN_EFF_MASK, cf->can_dlc); - else - sprintf(sl->xbuff, "%c%03X%d", cmd | 0x20, - cf->can_id & CAN_SFF_MASK, cf->can_dlc); + /* determine number of chars for the CAN-identifier */ + if (cf->can_id & CAN_EFF_FLAG) { + id &= CAN_EFF_MASK; + endpos = pos + SLC_EFF_ID_LEN; + } else { + *pos |= 0x20; /* convert R/T to lower case for SFF */ + id &= CAN_SFF_MASK; + endpos = pos + SLC_SFF_ID_LEN; + } - idx = strlen(sl->xbuff); + /* build 3 (SFF) or 8 (EFF) digit CAN identifier */ + pos++; + while (endpos >= pos) { + *endpos-- = hex_asc_upper[id & 0xf]; + id >>= 4; + } + + pos += (cf->can_id & CAN_EFF_FLAG) ? SLC_EFF_ID_LEN : SLC_SFF_ID_LEN; - for (i = 0; i < cf->can_dlc; i++) - sprintf(&sl->xbuff[idx + 2*i], "%02X", cf->data[i]); + *pos++ = cf->can_dlc + '0'; + + /* RTR frames may have a dlc > 0 but they never have any data bytes */ + if (!(cf->can_id & CAN_RTR_FLAG)) { + for (i = 0; i < cf->can_dlc; i++) + pos = hex_byte_pack_upper(pos, cf->data[i]); + } - strcat(sl->xbuff, "\r"); /* add terminating character */ + *pos++ = '\r'; /* Order of next two lines is *very* important. * When we are sending a little amount of data, @@ -267,8 +305,8 @@ static void slc_encaps(struct slcan *sl, struct can_frame *cf) * 14 Oct 1994 Dmitry Gorodchanin. */ set_bit(TTY_DO_WRITE_WAKEUP, &sl->tty->flags); - actual = sl->tty->ops->write(sl->tty, sl->xbuff, strlen(sl->xbuff)); - sl->xleft = strlen(sl->xbuff) - actual; + actual = sl->tty->ops->write(sl->tty, sl->xbuff, pos - sl->xbuff); + sl->xleft = (pos - sl->xbuff) - actual; sl->xhead = sl->xbuff + actual; sl->dev->stats.tx_bytes += cf->can_dlc; } @@ -286,11 +324,13 @@ static void slcan_write_wakeup(struct tty_struct *tty) if (!sl || sl->magic != SLCAN_MAGIC || !netif_running(sl->dev)) return; + spin_lock(&sl->lock); if (sl->xleft <= 0) { /* Now serial buffer is almost free & we can start * transmission of another packet */ sl->dev->stats.tx_packets++; clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); + spin_unlock(&sl->lock); netif_wake_queue(sl->dev); return; } @@ -298,6 +338,7 @@ static void slcan_write_wakeup(struct tty_struct *tty) actual = tty->ops->write(tty, sl->xhead, sl->xleft); sl->xleft -= actual; sl->xhead += actual; + spin_unlock(&sl->lock); } /* Send a can_frame to a TTY queue. */ diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_core.c b/drivers/net/can/usb/peak_usb/pcan_usb_core.c index a0f647f92bf5..0b7a4c3b01a2 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_core.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_core.c @@ -463,7 +463,7 @@ static int peak_usb_start(struct peak_usb_device *dev) if (i < PCAN_USB_MAX_TX_URBS) { if (i == 0) { netdev_err(netdev, "couldn't setup any tx URB\n"); - return err; + goto err_tx; } netdev_warn(netdev, "tx performance may be slow\n"); @@ -472,7 +472,7 @@ static int peak_usb_start(struct peak_usb_device *dev) if (dev->adapter->dev_start) { err = dev->adapter->dev_start(dev); if (err) - goto failed; + goto err_adapter; } dev->state |= PCAN_USB_STATE_STARTED; @@ -481,19 +481,26 @@ static int peak_usb_start(struct peak_usb_device *dev) if (dev->adapter->dev_set_bus) { err = dev->adapter->dev_set_bus(dev, 1); if (err) - goto failed; + goto err_adapter; } dev->can.state = CAN_STATE_ERROR_ACTIVE; return 0; -failed: +err_adapter: if (err == -ENODEV) netif_device_detach(dev->netdev); netdev_warn(netdev, "couldn't submit control: %d\n", err); + for (i = 0; i < PCAN_USB_MAX_TX_URBS; i++) { + usb_free_urb(dev->tx_contexts[i].urb); + dev->tx_contexts[i].urb = NULL; + } +err_tx: + usb_kill_anchored_urbs(&dev->rx_submitted); + return err; } diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index 61726af1de6e..e66beff2704d 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -2481,8 +2481,7 @@ load_error_cnic2: load_error_cnic1: bnx2x_napi_disable_cnic(bp); /* Update the number of queues without the cnic queues */ - rc = bnx2x_set_real_num_queues(bp, 0); - if (rc) + if (bnx2x_set_real_num_queues(bp, 0)) BNX2X_ERR("Unable to set real_num_queues not including cnic\n"); load_error_cnic0: BNX2X_ERR("CNIC-related load failed\n"); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index d60a2ea3da19..51468227bf3b 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -175,6 +175,7 @@ typedef int (*read_sfp_module_eeprom_func_p)(struct bnx2x_phy *phy, #define EDC_MODE_LINEAR 0x0022 #define EDC_MODE_LIMITING 0x0044 #define EDC_MODE_PASSIVE_DAC 0x0055 +#define EDC_MODE_ACTIVE_DAC 0x0066 /* ETS defines*/ #define DCBX_INVALID_COS (0xFF) @@ -3684,6 +3685,41 @@ static void bnx2x_warpcore_enable_AN_KR2(struct bnx2x_phy *phy, bnx2x_update_link_attr(params, vars->link_attr_sync); } +static void bnx2x_disable_kr2(struct link_params *params, + struct link_vars *vars, + struct bnx2x_phy *phy) +{ + struct bnx2x *bp = params->bp; + int i; + static struct bnx2x_reg_set reg_set[] = { + /* Step 1 - Program the TX/RX alignment markers */ + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL5, 0x7690}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL7, 0xe647}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL6, 0xc4f0}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL9, 0x7690}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_RX_CTRL11, 0xe647}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_RX_CTRL10, 0xc4f0}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_USERB0_CTRL, 0x000c}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CTRL1, 0x6000}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CTRL3, 0x0000}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CODE_FIELD, 0x0002}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI1, 0x0000}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI2, 0x0af7}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI3, 0x0af7}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_BAM_CODE, 0x0002}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_UD_CODE, 0x0000} + }; + DP(NETIF_MSG_LINK, "Disabling 20G-KR2\n"); + + for (i = 0; i < ARRAY_SIZE(reg_set); i++) + bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg, + reg_set[i].val); + vars->link_attr_sync &= ~LINK_ATTR_SYNC_KR2_ENABLE; + bnx2x_update_link_attr(params, vars->link_attr_sync); + + vars->check_kr2_recovery_cnt = CHECK_KR2_RECOVERY_CNT; +} + static void bnx2x_warpcore_set_lpi_passthrough(struct bnx2x_phy *phy, struct link_params *params) { @@ -3715,7 +3751,6 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, struct link_params *params, struct link_vars *vars) { u16 lane, i, cl72_ctrl, an_adv = 0; - u16 ucode_ver; struct bnx2x *bp = params->bp; static struct bnx2x_reg_set reg_set[] = { {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x7}, @@ -3806,15 +3841,7 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, /* Advertise pause */ bnx2x_ext_phy_set_pause(params, phy, vars); - /* Set KR Autoneg Work-Around flag for Warpcore version older than D108 - */ - bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_UC_INFO_B1_VERSION, &ucode_ver); - if (ucode_ver < 0xd108) { - DP(NETIF_MSG_LINK, "Enable AN KR work-around. WC ver:0x%x\n", - ucode_ver); - vars->rx_tx_asic_rst = MAX_KR_LINK_RETRY; - } + vars->rx_tx_asic_rst = MAX_KR_LINK_RETRY; bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL5_MISC7, 0x100); @@ -3838,6 +3865,8 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, bnx2x_set_aer_mmd(params, phy); bnx2x_warpcore_enable_AN_KR2(phy, params, vars); + } else { + bnx2x_disable_kr2(params, vars, phy); } /* Enable Autoneg: only on the main lane */ @@ -4347,20 +4376,14 @@ static void bnx2x_warpcore_config_runtime(struct bnx2x_phy *phy, struct bnx2x *bp = params->bp; u32 serdes_net_if; u16 gp_status1 = 0, lnkup = 0, lnkup_kr = 0; - u16 lane = bnx2x_get_warpcore_lane(phy, params); vars->turn_to_run_wc_rt = vars->turn_to_run_wc_rt ? 0 : 1; if (!vars->turn_to_run_wc_rt) return; - /* Return if there is no link partner */ - if (!(bnx2x_warpcore_get_sigdet(phy, params))) { - DP(NETIF_MSG_LINK, "bnx2x_warpcore_get_sigdet false\n"); - return; - } - if (vars->rx_tx_asic_rst) { + u16 lane = bnx2x_get_warpcore_lane(phy, params); serdes_net_if = (REG_RD(bp, params->shmem_base + offsetof(struct shmem_region, dev_info. port_hw_config[params->port].default_cfg)) & @@ -4375,14 +4398,8 @@ static void bnx2x_warpcore_config_runtime(struct bnx2x_phy *phy, /*10G KR*/ lnkup_kr = (gp_status1 >> (12+lane)) & 0x1; - DP(NETIF_MSG_LINK, - "gp_status1 0x%x\n", gp_status1); - if (lnkup_kr || lnkup) { - vars->rx_tx_asic_rst = 0; - DP(NETIF_MSG_LINK, - "link up, rx_tx_asic_rst 0x%x\n", - vars->rx_tx_asic_rst); + vars->rx_tx_asic_rst = 0; } else { /* Reset the lane to see if link comes up.*/ bnx2x_warpcore_reset_lane(bp, phy, 1); @@ -4507,10 +4524,14 @@ static void bnx2x_warpcore_config_init(struct bnx2x_phy *phy, * enabled transmitter to avoid current leakage in case * no module is connected */ - if (bnx2x_is_sfp_module_plugged(phy, params)) - bnx2x_sfp_module_detection(phy, params); - else - bnx2x_sfp_e3_set_transmitter(params, phy, 1); + if ((params->loopback_mode == LOOPBACK_NONE) || + (params->loopback_mode == LOOPBACK_EXT)) { + if (bnx2x_is_sfp_module_plugged(phy, params)) + bnx2x_sfp_module_detection(phy, params); + else + bnx2x_sfp_e3_set_transmitter(params, + phy, 1); + } bnx2x_warpcore_config_sfi(phy, params); break; @@ -5757,6 +5778,11 @@ static int bnx2x_warpcore_read_status(struct bnx2x_phy *phy, rc = bnx2x_get_link_speed_duplex(phy, params, vars, link_up, gp_speed, duplex); + /* In case of KR link down, start up the recovering procedure */ + if ((!link_up) && (phy->media_type == ETH_PHY_KR) && + (!(phy->flags & FLAGS_WC_DUAL_MODE))) + vars->rx_tx_asic_rst = MAX_KR_LINK_RETRY; + DP(NETIF_MSG_LINK, "duplex %x flow_ctrl 0x%x link_status 0x%x\n", vars->duplex, vars->flow_ctrl, vars->link_status); return rc; @@ -6507,6 +6533,11 @@ static int bnx2x_link_initialize(struct link_params *params, params->phy[INT_PHY].config_init(phy, params, vars); } + /* Re-read this value in case it was changed inside config_init due to + * limitations of optic module + */ + vars->line_speed = params->phy[INT_PHY].req_line_speed; + /* Init external phy*/ if (non_ext_phy) { if (params->phy[INT_PHY].supported & @@ -8080,7 +8111,10 @@ static int bnx2x_get_edc_mode(struct bnx2x_phy *phy, if (copper_module_type & SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_ACTIVE) { DP(NETIF_MSG_LINK, "Active Copper cable detected\n"); - check_limiting_mode = 1; + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) + *edc_mode = EDC_MODE_ACTIVE_DAC; + else + check_limiting_mode = 1; } else if (copper_module_type & SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_PASSIVE) { DP(NETIF_MSG_LINK, @@ -8555,6 +8589,7 @@ static void bnx2x_warpcore_set_limiting_mode(struct link_params *params, mode = MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_DEFAULT; break; case EDC_MODE_PASSIVE_DAC: + case EDC_MODE_ACTIVE_DAC: mode = MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_SFP_DAC; break; default: @@ -9730,32 +9765,41 @@ static int bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy, MDIO_AN_DEVAD, MDIO_AN_REG_8481_1000T_CTRL, an_1000_val); - /* set 100 speed advertisement */ - if ((phy->req_line_speed == SPEED_AUTO_NEG) && - (phy->speed_cap_mask & - (PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL | - PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF))) { - an_10_100_val |= (1<<7); - /* Enable autoneg and restart autoneg for legacy speeds */ - autoneg_val |= (1<<9 | 1<<12); - - if (phy->req_duplex == DUPLEX_FULL) + /* Set 10/100 speed advertisement */ + if (phy->req_line_speed == SPEED_AUTO_NEG) { + if (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL) { + /* Enable autoneg and restart autoneg for legacy speeds + */ + autoneg_val |= (1<<9 | 1<<12); an_10_100_val |= (1<<8); - DP(NETIF_MSG_LINK, "Advertising 100M\n"); - } - /* set 10 speed advertisement */ - if (((phy->req_line_speed == SPEED_AUTO_NEG) && - (phy->speed_cap_mask & - (PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL | - PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF)) && - (phy->supported & - (SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full)))) { - an_10_100_val |= (1<<5); - autoneg_val |= (1<<9 | 1<<12); - if (phy->req_duplex == DUPLEX_FULL) + DP(NETIF_MSG_LINK, "Advertising 100M-FD\n"); + } + + if (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF) { + /* Enable autoneg and restart autoneg for legacy speeds + */ + autoneg_val |= (1<<9 | 1<<12); + an_10_100_val |= (1<<7); + DP(NETIF_MSG_LINK, "Advertising 100M-HD\n"); + } + + if ((phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL) && + (phy->supported & SUPPORTED_10baseT_Full)) { an_10_100_val |= (1<<6); - DP(NETIF_MSG_LINK, "Advertising 10M\n"); + autoneg_val |= (1<<9 | 1<<12); + DP(NETIF_MSG_LINK, "Advertising 10M-FD\n"); + } + + if ((phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF) && + (phy->supported & SUPPORTED_10baseT_Half)) { + an_10_100_val |= (1<<5); + autoneg_val |= (1<<9 | 1<<12); + DP(NETIF_MSG_LINK, "Advertising 10M-HD\n"); + } } /* Only 10/100 are allowed to work in FORCE mode */ @@ -13432,43 +13476,6 @@ static void bnx2x_sfp_tx_fault_detection(struct bnx2x_phy *phy, } } } -static void bnx2x_disable_kr2(struct link_params *params, - struct link_vars *vars, - struct bnx2x_phy *phy) -{ - struct bnx2x *bp = params->bp; - int i; - static struct bnx2x_reg_set reg_set[] = { - /* Step 1 - Program the TX/RX alignment markers */ - {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL5, 0x7690}, - {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL7, 0xe647}, - {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL6, 0xc4f0}, - {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL9, 0x7690}, - {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_RX_CTRL11, 0xe647}, - {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_RX_CTRL10, 0xc4f0}, - {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_USERB0_CTRL, 0x000c}, - {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CTRL1, 0x6000}, - {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CTRL3, 0x0000}, - {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CODE_FIELD, 0x0002}, - {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI1, 0x0000}, - {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI2, 0x0af7}, - {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI3, 0x0af7}, - {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_BAM_CODE, 0x0002}, - {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_UD_CODE, 0x0000} - }; - DP(NETIF_MSG_LINK, "Disabling 20G-KR2\n"); - - for (i = 0; i < ARRAY_SIZE(reg_set); i++) - bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg, - reg_set[i].val); - vars->link_attr_sync &= ~LINK_ATTR_SYNC_KR2_ENABLE; - bnx2x_update_link_attr(params, vars->link_attr_sync); - - vars->check_kr2_recovery_cnt = CHECK_KR2_RECOVERY_CNT; - /* Restart AN on leading lane */ - bnx2x_warpcore_restart_AN_KR(phy, params); -} - static void bnx2x_kr2_recovery(struct link_params *params, struct link_vars *vars, struct bnx2x_phy *phy) @@ -13546,6 +13553,8 @@ static void bnx2x_check_kr2_wa(struct link_params *params, /* Disable KR2 on both lanes */ DP(NETIF_MSG_LINK, "BP=0x%x, NP=0x%x\n", base_page, next_page); bnx2x_disable_kr2(params, vars, phy); + /* Restart AN on leading lane */ + bnx2x_warpcore_restart_AN_KR(phy, params); return; } } diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index a6704b555042..82b658d8c04c 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -4703,6 +4703,14 @@ bool bnx2x_chk_parity_attn(struct bnx2x *bp, bool *global, bool print) attn.sig[3] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 + port*4); + /* Since MCP attentions can't be disabled inside the block, we need to + * read AEU registers to see whether they're currently disabled + */ + attn.sig[3] &= ((REG_RD(bp, + !port ? MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0 + : MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0) & + MISC_AEU_ENABLE_MCP_PRTY_BITS) | + ~MISC_AEU_ENABLE_MCP_PRTY_BITS); if (!CHIP_IS_E1x(bp)) attn.sig[4] = REG_RD(bp, @@ -5447,26 +5455,24 @@ static void bnx2x_timer(unsigned long data) if (IS_PF(bp) && !BP_NOMCP(bp)) { int mb_idx = BP_FW_MB_IDX(bp); - u32 drv_pulse; - u32 mcp_pulse; + u16 drv_pulse; + u16 mcp_pulse; ++bp->fw_drv_pulse_wr_seq; bp->fw_drv_pulse_wr_seq &= DRV_PULSE_SEQ_MASK; - /* TBD - add SYSTEM_TIME */ drv_pulse = bp->fw_drv_pulse_wr_seq; bnx2x_drv_pulse(bp); mcp_pulse = (SHMEM_RD(bp, func_mb[mb_idx].mcp_pulse_mb) & MCP_PULSE_SEQ_MASK); /* The delta between driver pulse and mcp response - * should be 1 (before mcp response) or 0 (after mcp response) + * should not get too big. If the MFW is more than 5 pulses + * behind, we should worry about it enough to generate an error + * log. */ - if ((drv_pulse != mcp_pulse) && - (drv_pulse != ((mcp_pulse + 1) & MCP_PULSE_SEQ_MASK))) { - /* someone lost a heartbeat... */ - BNX2X_ERR("drv_pulse (0x%x) != mcp_pulse (0x%x)\n", + if (((drv_pulse - mcp_pulse) & MCP_PULSE_SEQ_MASK) > 5) + BNX2X_ERR("MFW seems hanged: drv_pulse (0x%x) != mcp_pulse (0x%x)\n", drv_pulse, mcp_pulse); - } } if (bp->state == BNX2X_STATE_OPEN) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index 2604b6204abe..9ad012bdd915 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -1819,7 +1819,7 @@ bnx2x_get_vf_igu_cam_info(struct bnx2x *bp) fid = GET_FIELD((val), IGU_REG_MAPPING_MEMORY_FID); if (fid & IGU_FID_ENCODE_IS_PF) current_pf = fid & IGU_FID_PF_NUM_MASK; - else if (current_pf == BP_ABS_FUNC(bp)) + else if (current_pf == BP_FUNC(bp)) bnx2x_vf_set_igu_info(bp, sb_id, (fid & IGU_FID_VF_NUM_MASK)); DP(BNX2X_MSG_IOV, "%s[%d], igu_sb_id=%d, msix=%d\n", @@ -3180,6 +3180,7 @@ int bnx2x_enable_sriov(struct bnx2x *bp) /* set local queue arrays */ vf->vfqs = &bp->vfdb->vfqs[qcount]; qcount += vf_sb_count(vf); + bnx2x_iov_static_resc(bp, vf); } /* prepare msix vectors in VF configuration space */ @@ -3187,6 +3188,8 @@ int bnx2x_enable_sriov(struct bnx2x *bp) bnx2x_pretend_func(bp, HW_VF_HANDLE(bp, vf_idx)); REG_WR(bp, PCICFG_OFFSET + GRC_CONFIG_REG_VF_MSIX_CONTROL, num_vf_queues); + DP(BNX2X_MSG_IOV, "set msix vec num in VF %d cfg space to %d\n", + vf_idx, num_vf_queues); } bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c index 6cfb88732452..da16953eb2ec 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c @@ -1765,28 +1765,28 @@ static void bnx2x_vf_mbx_request(struct bnx2x *bp, struct bnx2x_virtf *vf, switch (mbx->first_tlv.tl.type) { case CHANNEL_TLV_ACQUIRE: bnx2x_vf_mbx_acquire(bp, vf, mbx); - break; + return; case CHANNEL_TLV_INIT: bnx2x_vf_mbx_init_vf(bp, vf, mbx); - break; + return; case CHANNEL_TLV_SETUP_Q: bnx2x_vf_mbx_setup_q(bp, vf, mbx); - break; + return; case CHANNEL_TLV_SET_Q_FILTERS: bnx2x_vf_mbx_set_q_filters(bp, vf, mbx); - break; + return; case CHANNEL_TLV_TEARDOWN_Q: bnx2x_vf_mbx_teardown_q(bp, vf, mbx); - break; + return; case CHANNEL_TLV_CLOSE: bnx2x_vf_mbx_close_vf(bp, vf, mbx); - break; + return; case CHANNEL_TLV_RELEASE: bnx2x_vf_mbx_release_vf(bp, vf, mbx); - break; + return; case CHANNEL_TLV_UPDATE_RSS: bnx2x_vf_mbx_update_rss(bp, vf, mbx); - break; + return; } } else { @@ -1802,26 +1802,24 @@ static void bnx2x_vf_mbx_request(struct bnx2x *bp, struct bnx2x_virtf *vf, for (i = 0; i < 20; i++) DP_CONT(BNX2X_MSG_IOV, "%x ", mbx->msg->req.tlv_buf_size.tlv_buffer[i]); + } - /* test whether we can respond to the VF (do we have an address - * for it?) - */ - if (vf->state == VF_ACQUIRED || vf->state == VF_ENABLED) { - /* mbx_resp uses the op_rc of the VF */ - vf->op_rc = PFVF_STATUS_NOT_SUPPORTED; + /* can we respond to VF (do we have an address for it?) */ + if (vf->state == VF_ACQUIRED || vf->state == VF_ENABLED) { + /* mbx_resp uses the op_rc of the VF */ + vf->op_rc = PFVF_STATUS_NOT_SUPPORTED; - /* notify the VF that we do not support this request */ - bnx2x_vf_mbx_resp(bp, vf); - } else { - /* can't send a response since this VF is unknown to us - * just ack the FW to release the mailbox and unlock - * the channel. - */ - storm_memset_vf_mbx_ack(bp, vf->abs_vfid); - mmiowb(); - bnx2x_unlock_vf_pf_channel(bp, vf, - mbx->first_tlv.tl.type); - } + /* notify the VF that we do not support this request */ + bnx2x_vf_mbx_resp(bp, vf); + } else { + /* can't send a response since this VF is unknown to us + * just ack the FW to release the mailbox and unlock + * the channel. + */ + storm_memset_vf_mbx_ack(bp, vf->abs_vfid); + /* Firmware ack should be written before unlocking channel */ + mmiowb(); + bnx2x_unlock_vf_pf_channel(bp, vf, mbx->first_tlv.tl.type); } } diff --git a/drivers/net/ethernet/marvell/skge.c b/drivers/net/ethernet/marvell/skge.c index 1a9c4f6269ea..ecc7f7b696b8 100644 --- a/drivers/net/ethernet/marvell/skge.c +++ b/drivers/net/ethernet/marvell/skge.c @@ -3086,13 +3086,16 @@ static struct sk_buff *skge_rx_get(struct net_device *dev, PCI_DMA_FROMDEVICE); skge_rx_reuse(e, skge->rx_buf_size); } else { + struct skge_element ee; struct sk_buff *nskb; nskb = netdev_alloc_skb_ip_align(dev, skge->rx_buf_size); if (!nskb) goto resubmit; - skb = e->skb; + ee = *e; + + skb = ee.skb; prefetch(skb->data); if (skge_rx_setup(skge, e, nskb, skge->rx_buf_size) < 0) { @@ -3101,8 +3104,8 @@ static struct sk_buff *skge_rx_get(struct net_device *dev, } pci_unmap_single(skge->hw->pdev, - dma_unmap_addr(e, mapaddr), - dma_unmap_len(e, maplen), + dma_unmap_addr(&ee, mapaddr), + dma_unmap_len(&ee, maplen), PCI_DMA_FROMDEVICE); } diff --git a/drivers/net/ethernet/qlogic/qlge/qlge_dbg.c b/drivers/net/ethernet/qlogic/qlge/qlge_dbg.c index 10093f0c4c0f..6bc5db703920 100644 --- a/drivers/net/ethernet/qlogic/qlge/qlge_dbg.c +++ b/drivers/net/ethernet/qlogic/qlge/qlge_dbg.c @@ -740,8 +740,8 @@ int ql_core_dump(struct ql_adapter *qdev, struct ql_mpi_coredump *mpi_coredump) int i; if (!mpi_coredump) { - netif_err(qdev, drv, qdev->ndev, "No memory available\n"); - return -ENOMEM; + netif_err(qdev, drv, qdev->ndev, "No memory allocated\n"); + return -EINVAL; } /* Try to get the spinlock, but dont worry if diff --git a/drivers/net/ethernet/qlogic/qlge/qlge_mpi.c b/drivers/net/ethernet/qlogic/qlge/qlge_mpi.c index ff2bf8a4e247..7ad146080c36 100644 --- a/drivers/net/ethernet/qlogic/qlge/qlge_mpi.c +++ b/drivers/net/ethernet/qlogic/qlge/qlge_mpi.c @@ -1274,7 +1274,7 @@ void ql_mpi_reset_work(struct work_struct *work) return; } - if (!ql_core_dump(qdev, qdev->mpi_coredump)) { + if (qdev->mpi_coredump && !ql_core_dump(qdev, qdev->mpi_coredump)) { netif_err(qdev, drv, qdev->ndev, "Core is dumped!\n"); qdev->core_is_dumped = 1; queue_delayed_work(qdev->workqueue, diff --git a/drivers/net/ethernet/sfc/mcdi.c b/drivers/net/ethernet/sfc/mcdi.c index 128d7cdf9eb2..c082562dbf4e 100644 --- a/drivers/net/ethernet/sfc/mcdi.c +++ b/drivers/net/ethernet/sfc/mcdi.c @@ -27,10 +27,10 @@ /* A reboot/assertion causes the MCDI status word to be set after the * command word is set or a REBOOT event is sent. If we notice a reboot - * via these mechanisms then wait 20ms for the status word to be set. + * via these mechanisms then wait 250ms for the status word to be set. */ #define MCDI_STATUS_DELAY_US 100 -#define MCDI_STATUS_DELAY_COUNT 200 +#define MCDI_STATUS_DELAY_COUNT 2500 #define MCDI_STATUS_SLEEP_MS \ (MCDI_STATUS_DELAY_US * MCDI_STATUS_DELAY_COUNT / 1000) @@ -800,9 +800,6 @@ static void efx_mcdi_ev_death(struct efx_nic *efx, int rc) } else { int count; - /* Nobody was waiting for an MCDI request, so trigger a reset */ - efx_schedule_reset(efx, RESET_TYPE_MC_FAILURE); - /* Consume the status word since efx_mcdi_rpc_finish() won't */ for (count = 0; count < MCDI_STATUS_DELAY_COUNT; ++count) { if (efx_mcdi_poll_reboot(efx)) @@ -810,6 +807,9 @@ static void efx_mcdi_ev_death(struct efx_nic *efx, int rc) udelay(MCDI_STATUS_DELAY_US); } mcdi->new_epoch = true; + + /* Nobody was waiting for an MCDI request, so trigger a reset */ + efx_schedule_reset(efx, RESET_TYPE_MC_FAILURE); } spin_unlock(&mcdi->iface_lock); diff --git a/drivers/net/ethernet/via/via-rhine.c b/drivers/net/ethernet/via/via-rhine.c index c8f088ab5fdf..bdf697b184ae 100644 --- a/drivers/net/ethernet/via/via-rhine.c +++ b/drivers/net/ethernet/via/via-rhine.c @@ -32,7 +32,7 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #define DRV_NAME "via-rhine" -#define DRV_VERSION "1.5.0" +#define DRV_VERSION "1.5.1" #define DRV_RELDATE "2010-10-09" #include <linux/types.h> @@ -1704,7 +1704,12 @@ static netdev_tx_t rhine_start_tx(struct sk_buff *skb, cpu_to_le32(TXDESC | (skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN)); if (unlikely(vlan_tx_tag_present(skb))) { - rp->tx_ring[entry].tx_status = cpu_to_le32((vlan_tx_tag_get(skb)) << 16); + u16 vid_pcp = vlan_tx_tag_get(skb); + + /* drop CFI/DEI bit, register needs VID and PCP */ + vid_pcp = (vid_pcp & VLAN_VID_MASK) | + ((vid_pcp & VLAN_PRIO_MASK) >> 1); + rp->tx_ring[entry].tx_status = cpu_to_le32((vid_pcp) << 16); /* request tagging */ rp->tx_ring[entry].desc_length |= cpu_to_le32(0x020000); } diff --git a/drivers/net/slip/slip.c b/drivers/net/slip/slip.c index a34d6bf5e43b..cc70ecfc7062 100644 --- a/drivers/net/slip/slip.c +++ b/drivers/net/slip/slip.c @@ -429,11 +429,13 @@ static void slip_write_wakeup(struct tty_struct *tty) if (!sl || sl->magic != SLIP_MAGIC || !netif_running(sl->dev)) return; + spin_lock(&sl->lock); if (sl->xleft <= 0) { /* Now serial buffer is almost free & we can start * transmission of another packet */ sl->dev->stats.tx_packets++; clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); + spin_unlock(&sl->lock); sl_unlock(sl); return; } @@ -441,6 +443,7 @@ static void slip_write_wakeup(struct tty_struct *tty) actual = tty->ops->write(tty, sl->xhead, sl->xleft); sl->xleft -= actual; sl->xhead += actual; + spin_unlock(&sl->lock); } static void sl_tx_timeout(struct net_device *dev) diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 482ad2d84a32..672ddc4de4af 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -439,6 +439,17 @@ static inline char *hex_byte_pack(char *buf, u8 byte) return buf; } +extern const char hex_asc_upper[]; +#define hex_asc_upper_lo(x) hex_asc_upper[((x) & 0x0f)] +#define hex_asc_upper_hi(x) hex_asc_upper[((x) & 0xf0) >> 4] + +static inline char *hex_byte_pack_upper(char *buf, u8 byte) +{ + *buf++ = hex_asc_upper_hi(byte); + *buf++ = hex_asc_upper_lo(byte); + return buf; +} + static inline char * __deprecated pack_hex_byte(char *buf, u8 byte) { return hex_byte_pack(buf, byte); diff --git a/include/net/mrp.h b/include/net/mrp.h index 4fbf02aa2ec1..0f7558b638ae 100644 --- a/include/net/mrp.h +++ b/include/net/mrp.h @@ -112,6 +112,7 @@ struct mrp_applicant { struct mrp_application *app; struct net_device *dev; struct timer_list join_timer; + struct timer_list periodic_timer; spinlock_t lock; struct sk_buff_head queue; diff --git a/lib/hexdump.c b/lib/hexdump.c index 3f0494c9d57a..8499c810909a 100644 --- a/lib/hexdump.c +++ b/lib/hexdump.c @@ -14,6 +14,8 @@ const char hex_asc[] = "0123456789abcdef"; EXPORT_SYMBOL(hex_asc); +const char hex_asc_upper[] = "0123456789ABCDEF"; +EXPORT_SYMBOL(hex_asc_upper); /** * hex_to_bin - convert a hex digit to its real value diff --git a/net/802/mrp.c b/net/802/mrp.c index 1eb05d80b07b..3ed616215870 100644 --- a/net/802/mrp.c +++ b/net/802/mrp.c @@ -24,6 +24,11 @@ static unsigned int mrp_join_time __read_mostly = 200; module_param(mrp_join_time, uint, 0644); MODULE_PARM_DESC(mrp_join_time, "Join time in ms (default 200ms)"); + +static unsigned int mrp_periodic_time __read_mostly = 1000; +module_param(mrp_periodic_time, uint, 0644); +MODULE_PARM_DESC(mrp_periodic_time, "Periodic time in ms (default 1s)"); + MODULE_LICENSE("GPL"); static const u8 @@ -595,6 +600,24 @@ static void mrp_join_timer(unsigned long data) mrp_join_timer_arm(app); } +static void mrp_periodic_timer_arm(struct mrp_applicant *app) +{ + mod_timer(&app->periodic_timer, + jiffies + msecs_to_jiffies(mrp_periodic_time)); +} + +static void mrp_periodic_timer(unsigned long data) +{ + struct mrp_applicant *app = (struct mrp_applicant *)data; + + spin_lock(&app->lock); + mrp_mad_event(app, MRP_EVENT_PERIODIC); + mrp_pdu_queue(app); + spin_unlock(&app->lock); + + mrp_periodic_timer_arm(app); +} + static int mrp_pdu_parse_end_mark(struct sk_buff *skb, int *offset) { __be16 endmark; @@ -845,6 +868,9 @@ int mrp_init_applicant(struct net_device *dev, struct mrp_application *appl) rcu_assign_pointer(dev->mrp_port->applicants[appl->type], app); setup_timer(&app->join_timer, mrp_join_timer, (unsigned long)app); mrp_join_timer_arm(app); + setup_timer(&app->periodic_timer, mrp_periodic_timer, + (unsigned long)app); + mrp_periodic_timer_arm(app); return 0; err3: @@ -870,6 +896,7 @@ void mrp_uninit_applicant(struct net_device *dev, struct mrp_application *appl) * all pending messages before the applicant is gone. */ del_timer_sync(&app->join_timer); + del_timer_sync(&app->periodic_timer); spin_lock_bh(&app->lock); mrp_mad_event(app, MRP_EVENT_TX); diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 1b66547a3ca6..fb7356fcfe51 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -1576,7 +1576,7 @@ static int hci_rfkill_set_block(void *data, bool blocked) hci_dev_do_close(hdev); } else { clear_bit(HCI_RFKILLED, &hdev->dev_flags); -} + } return 0; } diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c index bfec521c717f..193db03540ad 100644 --- a/net/ipv4/raw.c +++ b/net/ipv4/raw.c @@ -218,8 +218,10 @@ static void raw_err(struct sock *sk, struct sk_buff *skb, u32 info) if (type == ICMP_DEST_UNREACH && code == ICMP_FRAG_NEEDED) ipv4_sk_update_pmtu(skb, sk, info); - else if (type == ICMP_REDIRECT) + else if (type == ICMP_REDIRECT) { ipv4_sk_redirect(skb, sk); + return; + } /* Report error on raw socket, if: 1. User requested ip_recverr. diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index 74d2c95db57f..0ca44df51ee9 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -658,7 +658,7 @@ void __udp4_lib_err(struct sk_buff *skb, u32 info, struct udp_table *udptable) break; case ICMP_REDIRECT: ipv4_sk_redirect(skb, sk); - break; + goto out; } /* diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index 3a692d529163..a54c45ce4a48 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -1015,6 +1015,8 @@ static inline int ip6_ufo_append_data(struct sock *sk, * udp datagram */ if ((skb = skb_peek_tail(&sk->sk_write_queue)) == NULL) { + struct frag_hdr fhdr; + skb = sock_alloc_send_skb(sk, hh_len + fragheaderlen + transhdrlen + 20, (flags & MSG_DONTWAIT), &err); @@ -1036,12 +1038,6 @@ static inline int ip6_ufo_append_data(struct sock *sk, skb->protocol = htons(ETH_P_IPV6); skb->ip_summed = CHECKSUM_PARTIAL; skb->csum = 0; - } - - err = skb_append_datato_frags(sk,skb, getfrag, from, - (length - transhdrlen)); - if (!err) { - struct frag_hdr fhdr; /* Specify the length of each IPv6 datagram fragment. * It has to be a multiple of 8. @@ -1052,15 +1048,10 @@ static inline int ip6_ufo_append_data(struct sock *sk, ipv6_select_ident(&fhdr, rt); skb_shinfo(skb)->ip6_frag_id = fhdr.identification; __skb_queue_tail(&sk->sk_write_queue, skb); - - return 0; } - /* There is not enough support do UPD LSO, - * so follow normal path - */ - kfree_skb(skb); - return err; + return skb_append_datato_frags(sk, skb, getfrag, from, + (length - transhdrlen)); } static inline struct ipv6_opt_hdr *ip6_opt_dup(struct ipv6_opt_hdr *src, @@ -1227,27 +1218,27 @@ int ip6_append_data(struct sock *sk, int getfrag(void *from, char *to, * --yoshfuji */ - cork->length += length; - if (length > mtu) { - int proto = sk->sk_protocol; - if (dontfrag && (proto == IPPROTO_UDP || proto == IPPROTO_RAW)){ - ipv6_local_rxpmtu(sk, fl6, mtu-exthdrlen); - return -EMSGSIZE; - } - - if (proto == IPPROTO_UDP && - (rt->dst.dev->features & NETIF_F_UFO)) { + if ((length > mtu) && dontfrag && (sk->sk_protocol == IPPROTO_UDP || + sk->sk_protocol == IPPROTO_RAW)) { + ipv6_local_rxpmtu(sk, fl6, mtu-exthdrlen); + return -EMSGSIZE; + } - err = ip6_ufo_append_data(sk, getfrag, from, length, - hh_len, fragheaderlen, - transhdrlen, mtu, flags, rt); - if (err) - goto error; - return 0; - } + skb = skb_peek_tail(&sk->sk_write_queue); + cork->length += length; + if (((length > mtu) || + (skb && skb_is_gso(skb))) && + (sk->sk_protocol == IPPROTO_UDP) && + (rt->dst.dev->features & NETIF_F_UFO)) { + err = ip6_ufo_append_data(sk, getfrag, from, length, + hh_len, fragheaderlen, + transhdrlen, mtu, flags, rt); + if (err) + goto error; + return 0; } - if ((skb = skb_peek_tail(&sk->sk_write_queue)) == NULL) + if (!skb) goto alloc_new_skb; while (length > 0) { diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c index 58916bbb1728..a4ed2416399e 100644 --- a/net/ipv6/raw.c +++ b/net/ipv6/raw.c @@ -335,8 +335,10 @@ static void rawv6_err(struct sock *sk, struct sk_buff *skb, ip6_sk_update_pmtu(skb, sk, info); harderr = (np->pmtudisc == IPV6_PMTUDISC_DO); } - if (type == NDISC_REDIRECT) + if (type == NDISC_REDIRECT) { ip6_sk_redirect(skb, sk); + return; + } if (np->recverr) { u8 *payload = skb->data; if (!inet->hdrincl) diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index f4058150262b..72b7eaaf3ca0 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -525,8 +525,10 @@ void __udp6_lib_err(struct sk_buff *skb, struct inet6_skb_parm *opt, if (type == ICMPV6_PKT_TOOBIG) ip6_sk_update_pmtu(skb, sk, info); - if (type == NDISC_REDIRECT) + if (type == NDISC_REDIRECT) { ip6_sk_redirect(skb, sk); + goto out; + } np = inet6_sk(sk); diff --git a/net/lapb/lapb_timer.c b/net/lapb/lapb_timer.c index 54563ad8aeb1..355cc3b6fa4d 100644 --- a/net/lapb/lapb_timer.c +++ b/net/lapb/lapb_timer.c @@ -154,6 +154,7 @@ static void lapb_t1timer_expiry(unsigned long param) } else { lapb->n2count++; lapb_requeue_frames(lapb); + lapb_kick(lapb); } break; |