diff options
| -rw-r--r-- | drivers/net/ethernet/intel/fm10k/fm10k_pf.c | 22 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/fm10k/fm10k_type.h | 17 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/fm10k/fm10k_vf.c | 20 |
3 files changed, 55 insertions, 4 deletions
diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_pf.c b/drivers/net/ethernet/intel/fm10k/fm10k_pf.c index 00f7a29e734f..8b9b6ba5b92b 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k_pf.c +++ b/drivers/net/ethernet/intel/fm10k/fm10k_pf.c @@ -150,19 +150,26 @@ static s32 fm10k_init_hw_pf(struct fm10k_hw *hw) FM10K_TPH_RXCTRL_HDR_WROEN); } - /* set max hold interval to align with 1.024 usec in all modes */ + /* set max hold interval to align with 1.024 usec in all modes and + * store ITR scale + */ switch (hw->bus.speed) { case fm10k_bus_speed_2500: dma_ctrl = FM10K_DMA_CTRL_MAX_HOLD_1US_GEN1; + hw->mac.itr_scale = FM10K_TDLEN_ITR_SCALE_GEN1; break; case fm10k_bus_speed_5000: dma_ctrl = FM10K_DMA_CTRL_MAX_HOLD_1US_GEN2; + hw->mac.itr_scale = FM10K_TDLEN_ITR_SCALE_GEN2; break; case fm10k_bus_speed_8000: dma_ctrl = FM10K_DMA_CTRL_MAX_HOLD_1US_GEN3; + hw->mac.itr_scale = FM10K_TDLEN_ITR_SCALE_GEN3; break; default: dma_ctrl = 0; + /* just in case, assume Gen3 ITR scale */ + hw->mac.itr_scale = FM10K_TDLEN_ITR_SCALE_GEN3; break; } @@ -903,6 +910,13 @@ static s32 fm10k_iov_assign_default_mac_vlan_pf(struct fm10k_hw *hw, fm10k_write_reg(hw, FM10K_TDBAL(vf_q_idx), tdbal); fm10k_write_reg(hw, FM10K_TDBAH(vf_q_idx), tdbah); + /* Provide the VF the ITR scale, using software-defined fields in TDLEN + * to pass the information during VF initialization. See definition of + * FM10K_TDLEN_ITR_SCALE_SHIFT for more details. + */ + fm10k_write_reg(hw, FM10K_TDLEN(vf_q_idx), hw->mac.itr_scale << + FM10K_TDLEN_ITR_SCALE_SHIFT); + err_out: /* configure Queue control register */ txqctl = ((u32)vf_vid << FM10K_TXQCTL_VID_SHIFT) & @@ -1035,6 +1049,12 @@ static s32 fm10k_iov_reset_resources_pf(struct fm10k_hw *hw, for (i = queues_per_pool; i--;) { fm10k_write_reg(hw, FM10K_TDBAL(vf_q_idx + i), tdbal); fm10k_write_reg(hw, FM10K_TDBAH(vf_q_idx + i), tdbah); + /* See definition of FM10K_TDLEN_ITR_SCALE_SHIFT for an + * explanation of how TDLEN is used. + */ + fm10k_write_reg(hw, FM10K_TDLEN(vf_q_idx + i), + hw->mac.itr_scale << + FM10K_TDLEN_ITR_SCALE_SHIFT); fm10k_write_reg(hw, FM10K_TQMAP(qmap_idx + i), vf_q_idx + i); fm10k_write_reg(hw, FM10K_RQMAP(qmap_idx + i), vf_q_idx + i); } diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_type.h b/drivers/net/ethernet/intel/fm10k/fm10k_type.h index 35afd711d144..02727250ce1f 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k_type.h +++ b/drivers/net/ethernet/intel/fm10k/fm10k_type.h @@ -1,5 +1,5 @@ /* Intel Ethernet Switch Host Interface Driver - * Copyright(c) 2013 - 2014 Intel Corporation. + * Copyright(c) 2013 - 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -272,6 +272,20 @@ struct fm10k_hw; #define FM10K_TDBAL(_n) ((0x40 * (_n)) + 0x8000) #define FM10K_TDBAH(_n) ((0x40 * (_n)) + 0x8001) #define FM10K_TDLEN(_n) ((0x40 * (_n)) + 0x8002) +/* When fist initialized, VFs need to know the Interrupt Throttle Rate (ITR) + * scale which is based on the PCIe speed but the speed information in the PCI + * configuration space may not be accurate. The PF already knows the ITR scale + * but there is no defined method to pass that information from the PF to the + * VF. This is accomplished during VF initialization by temporarily co-opting + * the yet-to-be-used TDLEN register to have the PF store the ITR shift for + * the VF to retrieve before the VF needs to use the TDLEN register for its + * intended purpose, i.e. before the Tx resources are allocated. + */ +#define FM10K_TDLEN_ITR_SCALE_SHIFT 9 +#define FM10K_TDLEN_ITR_SCALE_MASK 0x00000E00 +#define FM10K_TDLEN_ITR_SCALE_GEN1 2 +#define FM10K_TDLEN_ITR_SCALE_GEN2 1 +#define FM10K_TDLEN_ITR_SCALE_GEN3 0 #define FM10K_TPH_TXCTRL(_n) ((0x40 * (_n)) + 0x8003) #define FM10K_TPH_TXCTRL_DESC_TPHEN 0x00000020 #define FM10K_TPH_TXCTRL_DESC_RROEN 0x00000200 @@ -560,6 +574,7 @@ struct fm10k_mac_info { bool get_host_state; bool tx_ready; u32 dglort_map; + u8 itr_scale; }; struct fm10k_swapi_table_info { diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_vf.c b/drivers/net/ethernet/intel/fm10k/fm10k_vf.c index d512575c33f3..2af697df5abc 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k_vf.c +++ b/drivers/net/ethernet/intel/fm10k/fm10k_vf.c @@ -28,7 +28,7 @@ static s32 fm10k_stop_hw_vf(struct fm10k_hw *hw) { u8 *perm_addr = hw->mac.perm_addr; - u32 bal = 0, bah = 0; + u32 bal = 0, bah = 0, tdlen; s32 err; u16 i; @@ -48,6 +48,9 @@ static s32 fm10k_stop_hw_vf(struct fm10k_hw *hw) ((u32)perm_addr[2]); } + /* restore default itr_scale for next VF initialization */ + tdlen = hw->mac.itr_scale << FM10K_TDLEN_ITR_SCALE_SHIFT; + /* The queues have already been disabled so we just need to * update their base address registers */ @@ -56,6 +59,12 @@ static s32 fm10k_stop_hw_vf(struct fm10k_hw *hw) fm10k_write_reg(hw, FM10K_TDBAH(i), bah); fm10k_write_reg(hw, FM10K_RDBAL(i), bal); fm10k_write_reg(hw, FM10K_RDBAH(i), bah); + /* Restore ITR scale in software-defined mechanism in TDLEN + * for next VF initialization. See definition of + * FM10K_TDLEN_ITR_SCALE_SHIFT for more details on the use of + * TDLEN here. + */ + fm10k_write_reg(hw, FM10K_TDLEN(i), tdlen); } return 0; @@ -131,9 +140,16 @@ static s32 fm10k_init_hw_vf(struct fm10k_hw *hw) /* record maximum queue count */ hw->mac.max_queues = i; - /* fetch default VLAN */ + /* fetch default VLAN and ITR scale */ hw->mac.default_vid = (fm10k_read_reg(hw, FM10K_TXQCTL(0)) & FM10K_TXQCTL_VID_MASK) >> FM10K_TXQCTL_VID_SHIFT; + /* Read the ITR scale from TDLEN. See the definition of + * FM10K_TDLEN_ITR_SCALE_SHIFT for more information about how TDLEN is + * used here. + */ + hw->mac.itr_scale = (fm10k_read_reg(hw, FM10K_TDLEN(0)) & + FM10K_TDLEN_ITR_SCALE_MASK) >> + FM10K_TDLEN_ITR_SCALE_SHIFT; return 0; |