diff options
| -rw-r--r-- | Documentation/devicetree/bindings/regulator/max77802.txt | 25 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/regulator/regulator.txt | 1 | ||||
| -rw-r--r-- | drivers/regulator/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/regulator/of_regulator.c | 3 | ||||
| -rw-r--r-- | drivers/regulator/pwm-regulator.c | 35 | ||||
| -rw-r--r-- | drivers/regulator/qcom_smd-regulator.c | 28 |
6 files changed, 72 insertions, 22 deletions
diff --git a/Documentation/devicetree/bindings/regulator/max77802.txt b/Documentation/devicetree/bindings/regulator/max77802.txt index 79e5476444f7..09d796ed48be 100644 --- a/Documentation/devicetree/bindings/regulator/max77802.txt +++ b/Documentation/devicetree/bindings/regulator/max77802.txt @@ -8,7 +8,28 @@ regulators that can be controlled over I2C. Following properties should be present in main device node of the MFD chip. -Optional node: +Optional properties: +- inb1-supply: The input supply for BUCK1 +- inb2-supply: The input supply for BUCK2 +- inb3-supply: The input supply for BUCK3 +- inb4-supply: The input supply for BUCK4 +- inb5-supply: The input supply for BUCK5 +- inb6-supply: The input supply for BUCK6 +- inb7-supply: The input supply for BUCK7 +- inb8-supply: The input supply for BUCK8 +- inb9-supply: The input supply for BUCK9 +- inb10-supply: The input supply for BUCK10 +- inl1-supply: The input supply for LDO8 and LDO15 +- inl2-supply: The input supply for LDO17, LDO27, LDO30 and LDO35 +- inl3-supply: The input supply for LDO3, LDO5, LDO6 and LDO7 +- inl4-supply: The input supply for LDO10, LDO11, LDO13 and LDO14 +- inl5-supply: The input supply for LDO9 and LDO19 +- inl6-supply: The input supply for LDO4, LDO21, LDO24 and LDO33 +- inl7-supply: The input supply for LDO18, LDO20, LDO28 and LDO29 +- inl9-supply: The input supply for LDO12, LDO23, LDO25, LDO26, LDO32 and LDO34 +- inl10-supply: The input supply for LDO1 and LDO2 + +Optional nodes: - regulators : The regulators of max77802 have to be instantiated under subnode named "regulators" using the following format. @@ -58,6 +79,8 @@ Example: #address-cells = <1>; #size-cells = <0>; + inb1-supply = <&parent_reg>; + regulators { ldo1_reg: LDO1 { regulator-name = "vdd_1v0"; diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt index 24bd422cecd5..1d112fc456aa 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.txt +++ b/Documentation/devicetree/bindings/regulator/regulator.txt @@ -11,6 +11,7 @@ Optional properties: - regulator-always-on: boolean, regulator should never be disabled - regulator-boot-on: bootloader/firmware enabled regulator - regulator-allow-bypass: allow the regulator to go into bypass mode +- regulator-allow-set-load: allow the regulator performance level to be configured - <name>-supply: phandle to the parent supply/regulator node - regulator-ramp-delay: ramp delay for regulator(in uV/uS) For hardware which supports disabling ramp rate, it should be explicitly diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 64bccff557be..8df0b0e62976 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -627,7 +627,7 @@ config REGULATOR_TI_ABB config REGULATOR_STW481X_VMMC bool "ST Microelectronics STW481X VMMC regulator" - depends on MFD_STW481X + depends on MFD_STW481X || COMPILE_TEST default y if MFD_STW481X help This driver supports the internal VMMC regulator in the STw481x diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c index 250700c853bf..499e437c7e91 100644 --- a/drivers/regulator/of_regulator.c +++ b/drivers/regulator/of_regulator.c @@ -76,6 +76,9 @@ static void of_get_regulation_constraints(struct device_node *np, if (of_property_read_bool(np, "regulator-allow-bypass")) constraints->valid_ops_mask |= REGULATOR_CHANGE_BYPASS; + if (of_property_read_bool(np, "regulator-allow-set-load")) + constraints->valid_ops_mask |= REGULATOR_CHANGE_DRMS; + ret = of_property_read_u32(np, "regulator-ramp-delay", &pval); if (!ret) { if (pval) diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c index fc3166dfcbfa..3aca067b9901 100644 --- a/drivers/regulator/pwm-regulator.c +++ b/drivers/regulator/pwm-regulator.c @@ -69,12 +69,6 @@ static int pwm_regulator_set_voltage_sel(struct regulator_dev *rdev, drvdata->state = selector; - ret = pwm_enable(drvdata->pwm); - if (ret) { - dev_err(&rdev->dev, "Failed to enable PWM\n"); - return ret; - } - return 0; } @@ -89,6 +83,29 @@ static int pwm_regulator_list_voltage(struct regulator_dev *rdev, return drvdata->duty_cycle_table[selector].uV; } +static int pwm_regulator_enable(struct regulator_dev *dev) +{ + struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev); + + return pwm_enable(drvdata->pwm); +} + +static int pwm_regulator_disable(struct regulator_dev *dev) +{ + struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev); + + pwm_disable(drvdata->pwm); + + return 0; +} + +static int pwm_regulator_is_enabled(struct regulator_dev *dev) +{ + struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev); + + return pwm_is_enabled(drvdata->pwm); +} + /** * Continuous voltage call-backs */ @@ -144,11 +161,17 @@ static struct regulator_ops pwm_regulator_voltage_table_ops = { .get_voltage_sel = pwm_regulator_get_voltage_sel, .list_voltage = pwm_regulator_list_voltage, .map_voltage = regulator_map_voltage_iterate, + .enable = pwm_regulator_enable, + .disable = pwm_regulator_disable, + .is_enabled = pwm_regulator_is_enabled, }; static struct regulator_ops pwm_regulator_voltage_continuous_ops = { .get_voltage = pwm_regulator_get_voltage, .set_voltage = pwm_regulator_set_voltage, + .enable = pwm_regulator_enable, + .disable = pwm_regulator_disable, + .is_enabled = pwm_regulator_is_enabled, }; static struct regulator_desc pwm_regulator_desc = { diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c index 9c6167dd2c8b..6fa0c7d13290 100644 --- a/drivers/regulator/qcom_smd-regulator.c +++ b/drivers/regulator/qcom_smd-regulator.c @@ -36,9 +36,9 @@ struct qcom_rpm_reg { }; struct rpm_regulator_req { - u32 key; - u32 nbytes; - u32 value; + __le32 key; + __le32 nbytes; + __le32 value; }; #define RPM_KEY_SWEN 0x6e657773 /* "swen" */ @@ -62,9 +62,9 @@ static int rpm_reg_enable(struct regulator_dev *rdev) struct rpm_regulator_req req; int ret; - req.key = RPM_KEY_SWEN; - req.nbytes = sizeof(u32); - req.value = 1; + req.key = cpu_to_le32(RPM_KEY_SWEN); + req.nbytes = cpu_to_le32(sizeof(u32)); + req.value = cpu_to_le32(1); ret = rpm_reg_write_active(vreg, &req, sizeof(req)); if (!ret) @@ -86,8 +86,8 @@ static int rpm_reg_disable(struct regulator_dev *rdev) struct rpm_regulator_req req; int ret; - req.key = RPM_KEY_SWEN; - req.nbytes = sizeof(u32); + req.key = cpu_to_le32(RPM_KEY_SWEN); + req.nbytes = cpu_to_le32(sizeof(u32)); req.value = 0; ret = rpm_reg_write_active(vreg, &req, sizeof(req)); @@ -113,9 +113,9 @@ static int rpm_reg_set_voltage(struct regulator_dev *rdev, struct rpm_regulator_req req; int ret = 0; - req.key = RPM_KEY_UV; - req.nbytes = sizeof(u32); - req.value = min_uV; + req.key = cpu_to_le32(RPM_KEY_UV); + req.nbytes = cpu_to_le32(sizeof(u32)); + req.value = cpu_to_le32(min_uV); ret = rpm_reg_write_active(vreg, &req, sizeof(req)); if (!ret) @@ -129,9 +129,9 @@ static int rpm_reg_set_load(struct regulator_dev *rdev, int load_uA) struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev); struct rpm_regulator_req req; - req.key = RPM_KEY_MA; - req.nbytes = sizeof(u32); - req.value = load_uA; + req.key = cpu_to_le32(RPM_KEY_MA); + req.nbytes = cpu_to_le32(sizeof(u32)); + req.value = cpu_to_le32(load_uA / 1000); return rpm_reg_write_active(vreg, &req, sizeof(req)); } |