8 files changed, 46 insertions, 35 deletions
diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl
index 133cd6c3f3c1..020ac80d4682 100644
--- a/Documentation/DocBook/mtdnand.tmpl
+++ b/Documentation/DocBook/mtdnand.tmpl
@@ -269,7 +269,7 @@ static void board_hwcontrol(struct mtd_info *mtd, int cmd)
 			information about the device.
 		</para>
 		<programlisting>
-int __init board_init (void)
+static int __init board_init (void)
 {
 	struct nand_chip *this;
 	int err = 0;
diff --git a/Documentation/SubmitChecklist b/Documentation/SubmitChecklist
index 8916ca48bc95..da0382daa395 100644
--- a/Documentation/SubmitChecklist
+++ b/Documentation/SubmitChecklist
@@ -18,6 +18,8 @@ kernel patches.
 
 2b: Passes allnoconfig, allmodconfig
 
+2c: Builds successfully when using O=builddir
+
 3: Builds on multiple CPU architectures by using local cross-compile tools
    or some other build farm.
 
@@ -95,3 +97,13 @@ kernel patches.
 
 25: If any ioctl's are added by the patch, then also update
     Documentation/ioctl/ioctl-number.txt.
+
+26: If your modified source code depends on or uses any of the kernel
+    APIs or features that are related to the following kconfig symbols,
+    then test multiple builds with the related kconfig symbols disabled
+    and/or =m (if that option is available) [not all of these at the
+    same time, just various/random combinations of them]:
+
+    CONFIG_SMP, CONFIG_SYSFS, CONFIG_PROC_FS, CONFIG_INPUT, CONFIG_PCI,
+    CONFIG_BLOCK, CONFIG_PM, CONFIG_HOTPLUG, CONFIG_MAGIC_SYSRQ,
+    CONFIG_NET, CONFIG_INET=n (but latter with CONFIG_NET=y)
diff --git a/Documentation/development-process/2.Process b/Documentation/development-process/2.Process
index d750321acd5a..97726eba6102 100644
--- a/Documentation/development-process/2.Process
+++ b/Documentation/development-process/2.Process
@@ -151,7 +151,7 @@ The stages that a patch goes through are, generally:
    well.
 
  - Wider review.  When the patch is getting close to ready for mainline
-   inclusion, it will be accepted by a relevant subsystem maintainer -
+   inclusion, it should be accepted by a relevant subsystem maintainer -
    though this acceptance is not a guarantee that the patch will make it
    all the way to the mainline.  The patch will show up in the maintainer's
    subsystem tree and into the staging trees (described below).  When the
@@ -159,6 +159,15 @@ The stages that a patch goes through are, generally:
    the discovery of any problems resulting from the integration of this
    patch with work being done by others.
 
+-  Please note that most maintainers also have day jobs, so merging
+   your patch may not be their highest priority.  If your patch is
+   getting feedback about changes that are needed, you should either
+   make those changes or justify why they should not be made.  If your
+   patch has no review complaints but is not being merged by its
+   appropriate subsystem or driver maintainer, you should be persistent
+   in updating the patch to the current kernel so that it applies cleanly
+   and keep sending it for review and merging.
+
  - Merging into the mainline.  Eventually, a successful patch will be
    merged into the mainline repository managed by Linus Torvalds.  More
    comments and/or problems may surface at this time; it is important that
@@ -258,12 +267,8 @@ an appropriate subsystem tree or be sent directly to Linus.  In a typical
 development cycle, approximately 10% of the patches going into the mainline
 get there via -mm.
 
-The current -mm patch can always be found from the front page of
-
-	http://kernel.org/
-
-Those who want to see the current state of -mm can get the "-mm of the
-moment" tree, found at:
+The current -mm patch is available in the "mmotm" (-mm of the moment)
+directory at:
 
 	http://userweb.kernel.org/~akpm/mmotm/
 
@@ -298,6 +303,12 @@ volatility of linux-next tends to make it a difficult development target.
 See http://lwn.net/Articles/289013/ for more information on this topic, and
 stay tuned; much is still in flux where linux-next is involved.
 
+Besides the mmotm and linux-next trees, the kernel source tree now contains
+the drivers/staging/ directory and many sub-directories for drivers or
+filesystems that are on their way to being added to the kernel tree
+proper, but they remain in drivers/staging/ while they still need more
+work.
+
 
 2.5: TOOLS
 
@@ -319,9 +330,9 @@ developers; even if they do not use it for their own work, they'll need git
 to keep up with what other developers (and the mainline) are doing.
 
 Git is now packaged by almost all Linux distributions.  There is a home
-page at 
+page at:
 
-	http://git.or.cz/
+	http://git-scm.com/
 
 That page has pointers to documentation and tutorials.  One should be
 aware, in particular, of the Kernel Hacker's Guide to git, which has
diff --git a/Documentation/development-process/7.AdvancedTopics b/Documentation/development-process/7.AdvancedTopics
index a2cf74093aa1..837179447e17 100644
--- a/Documentation/development-process/7.AdvancedTopics
+++ b/Documentation/development-process/7.AdvancedTopics
@@ -25,7 +25,7 @@ long document in its own right.  Instead, the focus here will be on how git
 fits into the kernel development process in particular.  Developers who
 wish to come up to speed with git will find more information at:
 
-	http://git.or.cz/
+	http://git-scm.com/
 
 	http://www.kernel.org/pub/software/scm/git/docs/user-manual.html
 
diff --git a/Documentation/timers/hpet_example.c b/Documentation/timers/hpet_example.c
index f9ce2d9fdfd5..4bfafb7bc4c5 100644
--- a/Documentation/timers/hpet_example.c
+++ b/Documentation/timers/hpet_example.c
@@ -10,7 +10,6 @@
 #include <sys/types.h>
 #include <sys/wait.h>
 #include <signal.h>
-#include <fcntl.h>
 #include <errno.h>
 #include <sys/time.h>
 #include <linux/hpet.h>
@@ -24,7 +23,6 @@ extern void hpet_read(int, const char **);
 
 #include <sys/poll.h>
 #include <sys/ioctl.h>
-#include <signal.h>
 
 struct hpet_command {
 	char		*command;
diff --git a/Documentation/vm/map_hugetlb.c b/Documentation/vm/map_hugetlb.c
index 9969c7d9f985..eda1a6d3578a 100644
--- a/Documentation/vm/map_hugetlb.c
+++ b/Documentation/vm/map_hugetlb.c
@@ -19,7 +19,7 @@
 #define PROTECTION (PROT_READ | PROT_WRITE)
 
 #ifndef MAP_HUGETLB
-#define MAP_HUGETLB 0x40
+#define MAP_HUGETLB 0x40000 /* arch specific */
 #endif
 
 /* Only ia64 requires this */
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index 7bd4c0fc23cc..5c53624e0e87 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -2570,9 +2570,7 @@ mptscsih_getclear_scsi_lookup(MPT_ADAPTER *ioc, int i)
 }
 
 /**
- * mptscsih_set_scsi_lookup
- *
- * writes a scmd entry into the ScsiLookup[] array list
+ * mptscsih_set_scsi_lookup - write a scmd entry into the ScsiLookup[] array list
  *
  * @ioc: Pointer to MPT_ADAPTER structure
  * @i: index into the array
@@ -2735,7 +2733,7 @@ mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
 
 
 /**
- *	mptscsih_get_completion_code -
+ *	mptscsih_get_completion_code - get completion code from MPT request
  *	@ioc: Pointer to MPT_ADAPTER structure
  *	@req: Pointer to original MPT request frame
  *	@reply: Pointer to MPT reply frame (NULL if TurboReply)
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index c992ecf4e372..9798c2c06b93 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -1220,7 +1220,7 @@ static void scsi_sequential_lun_scan(struct scsi_target *starget,
 }
 
 /**
- * scsilun_to_int: convert a scsi_lun to an int
+ * scsilun_to_int - convert a scsi_lun to an int
  * @scsilun:	struct scsi_lun to be converted.
  *
  * Description:
@@ -1252,7 +1252,7 @@ int scsilun_to_int(struct scsi_lun *scsilun)
 EXPORT_SYMBOL(scsilun_to_int);
 
 /**
- * int_to_scsilun: reverts an int into a scsi_lun
+ * int_to_scsilun - reverts an int into a scsi_lun
  * @lun:        integer to be reverted
  * @scsilun:	struct scsi_lun to be set.
  *
@@ -1876,12 +1876,9 @@ void scsi_forget_host(struct Scsi_Host *shost)
 	spin_unlock_irqrestore(shost->host_lock, flags);
 }
 
-/*
- * Function:    scsi_get_host_dev()
- *
- * Purpose:     Create a scsi_device that points to the host adapter itself.
- *
- * Arguments:   SHpnt   - Host that needs a scsi_device
+/**
+ * scsi_get_host_dev - Create a scsi_device that points to the host adapter itself
+ * @shost: Host that needs a scsi_device
  *
  * Lock status: None assumed.
  *
@@ -1894,7 +1891,7 @@ void scsi_forget_host(struct Scsi_Host *shost)
  *
  *	Note - this device is not accessible from any high-level
  *	drivers (including generics), which is probably not
- *	optimal.  We can add hooks later to attach 
+ *	optimal.  We can add hooks later to attach.
  */
 struct scsi_device *scsi_get_host_dev(struct Scsi_Host *shost)
 {
@@ -1920,18 +1917,13 @@ struct scsi_device *scsi_get_host_dev(struct Scsi_Host *shost)
 }
 EXPORT_SYMBOL(scsi_get_host_dev);
 
-/*
- * Function:    scsi_free_host_dev()
- *
- * Purpose:     Free a scsi_device that points to the host adapter itself.
- *
- * Arguments:   SHpnt   - Host that needs a scsi_device
+/**
+ * scsi_free_host_dev - Free a scsi_device that points to the host adapter itself
+ * @sdev: Host device to be freed
  *
  * Lock status: None assumed.
  *
  * Returns:     Nothing
- *
- * Notes:
  */
 void scsi_free_host_dev(struct scsi_device *sdev)
 {