diff options
32 files changed, 306 insertions, 166 deletions
diff --git a/Documentation/devicetree/bindings/regulator/pbias-regulator.txt b/Documentation/devicetree/bindings/regulator/pbias-regulator.txt index 32aa26f1e434..acbcb452a69a 100644 --- a/Documentation/devicetree/bindings/regulator/pbias-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/pbias-regulator.txt @@ -2,7 +2,12 @@ PBIAS internal regulator for SD card dual voltage i/o pads on OMAP SoCs. Required properties: - compatible: - - "ti,pbias-omap" for OMAP2, OMAP3, OMAP4, OMAP5, DRA7. + - should be "ti,pbias-dra7" for DRA7 + - should be "ti,pbias-omap2" for OMAP2 + - should be "ti,pbias-omap3" for OMAP3 + - should be "ti,pbias-omap4" for OMAP4 + - should be "ti,pbias-omap5" for OMAP5 + - "ti,pbias-omap" is deprecated - reg: pbias register offset from syscon base and size of pbias register. - syscon : phandle of the system control module - regulator-name : should be diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi index 4d28fc3aac69..5dd084f3c81c 100644 --- a/arch/arm/boot/dts/am335x-phycore-som.dtsi +++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi @@ -252,10 +252,10 @@ }; vdd1_reg: regulator@2 { - /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + /* VDD_MPU voltage limits 0.95V - 1.325V with +/-4% tolerance */ regulator-name = "vdd_mpu"; regulator-min-microvolt = <912500>; - regulator-max-microvolt = <1312500>; + regulator-max-microvolt = <1378000>; regulator-boot-on; regulator-always-on; }; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 3a05b94f59ed..568adf5efde0 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -98,13 +98,6 @@ pinctrl-0 = <&extcon_usb1_pins>; }; - extcon_usb2: extcon_usb2 { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&gpio7 24 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&extcon_usb2_pins>; - }; - hdmi0: connector { compatible = "hdmi-connector"; label = "hdmi"; @@ -326,12 +319,6 @@ >; }; - extcon_usb2_pins: extcon_usb2_pins { - pinctrl-single,pins = < - 0x3e8 (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_ctsn.gpio7_24 */ - >; - }; - tpd12s015_pins: pinmux_tpd12s015_pins { pinctrl-single,pins = < 0x3b0 (PIN_OUTPUT | MUX_MODE14) /* gpio7_10 CT_CP_HPD */ @@ -432,7 +419,7 @@ }; ldo3_reg: ldo3 { - /* VDDA_1V8_PHY */ + /* VDDA_1V8_PHYA */ regulator-name = "ldo3"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -440,6 +427,15 @@ regulator-boot-on; }; + ldo4_reg: ldo4 { + /* VDDA_1V8_PHYB */ + regulator-name = "ldo4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + ldo9_reg: ldo9 { /* VDD_RTC */ regulator-name = "ldo9"; @@ -495,6 +491,14 @@ gpio-controller; #gpio-cells = <2>; }; + + extcon_usb2: tps659038_usb { + compatible = "ti,palmas-usb-vid"; + ti,enable-vbus-detection; + ti,enable-id-detection; + id-gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>; + }; + }; tmp102: tmp102@48 { @@ -517,7 +521,8 @@ mcp_rtc: rtc@6f { compatible = "microchip,mcp7941x"; reg = <0x6f>; - interrupts = <GIC_SPI 2 IRQ_TYPE_EDGE_RISING>; /* IRQ_SYS_1N */ + interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>, + <&dra7_pmx_core 0x424>; pinctrl-names = "default"; pinctrl-0 = <&mcp79410_pins_default>; @@ -579,7 +584,6 @@ pinctrl-0 = <&mmc1_pins_default>; vmmc-supply = <&ldo1_reg>; - vmmc_aux-supply = <&vdd_3v3>; bus-width = <4>; cd-gpios = <&gpio6 27 0>; /* gpio 219 */ }; @@ -623,6 +627,14 @@ }; &usb2 { + /* + * Stand alone usage is peripheral only. + * However, with some resistor modifications + * this port can be used via expansion connectors + * as "host" or "dual-role". If so, provide + * the necessary dr_mode override in the expansion + * board's DT. + */ dr_mode = "peripheral"; }; @@ -681,7 +693,7 @@ &hdmi { status = "ok"; - vdda-supply = <&ldo3_reg>; + vdda-supply = <&ldo4_reg>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_pins>; diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts index 92bacd3c8fab..109fd4711647 100644 --- a/arch/arm/boot/dts/dm8148-evm.dts +++ b/arch/arm/boot/dts/dm8148-evm.dts @@ -19,10 +19,10 @@ &cpsw_emac0 { phy_id = <&davinci_mdio>, <0>; - phy-mode = "mii"; + phy-mode = "rgmii"; }; &cpsw_emac1 { phy_id = <&davinci_mdio>, <1>; - phy-mode = "mii"; + phy-mode = "rgmii"; }; diff --git a/arch/arm/boot/dts/dm8148-t410.dts b/arch/arm/boot/dts/dm8148-t410.dts index 8c4bbc7573df..79838dd8dee7 100644 --- a/arch/arm/boot/dts/dm8148-t410.dts +++ b/arch/arm/boot/dts/dm8148-t410.dts @@ -8,7 +8,7 @@ #include "dm814x.dtsi" / { - model = "DM8148 EVM"; + model = "HP t410 Smart Zero Client"; compatible = "hp,t410", "ti,dm8148"; memory { @@ -19,10 +19,10 @@ &cpsw_emac0 { phy_id = <&davinci_mdio>, <0>; - phy-mode = "mii"; + phy-mode = "rgmii"; }; &cpsw_emac1 { phy_id = <&davinci_mdio>, <1>; - phy-mode = "mii"; + phy-mode = "rgmii"; }; diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi index 972c9c9e885b..7988b42e5764 100644 --- a/arch/arm/boot/dts/dm814x.dtsi +++ b/arch/arm/boot/dts/dm814x.dtsi @@ -181,9 +181,9 @@ ti,hwmods = "timer3"; }; - control: control@160000 { + control: control@140000 { compatible = "ti,dm814-scm", "simple-bus"; - reg = <0x160000 0x16d000>; + reg = <0x140000 0x16d000>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x160000 0x16d000>; @@ -321,9 +321,9 @@ mac-address = [ 00 00 00 00 00 00 ]; }; - phy_sel: cpsw-phy-sel@0x48160650 { + phy_sel: cpsw-phy-sel@48140650 { compatible = "ti,am3352-cpsw-phy-sel"; - reg= <0x48160650 0x4>; + reg= <0x48140650 0x4>; reg-names = "gmii-sel"; }; }; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 5d65db9ebc2b..e289c706d27d 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -120,9 +120,10 @@ reg = <0x0 0x1400>; #address-cells = <1>; #size-cells = <1>; + ranges = <0 0x0 0x1400>; pbias_regulator: pbias_regulator { - compatible = "ti,pbias-omap"; + compatible = "ti,pbias-dra7", "ti,pbias-omap"; reg = <0xe00 0x4>; syscon = <&scm_conf>; pbias_mmc_reg: pbias_mmc_omap5 { @@ -1417,7 +1418,7 @@ ti,irqs-safe-map = <0>; }; - mac: ethernet@4a100000 { + mac: ethernet@48484000 { compatible = "ti,dra7-cpsw","ti,cpsw"; ti,hwmods = "gmac"; clocks = <&dpll_gmac_ck>, <&gmac_gmii_ref_clk_div>; diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index 2390f387c271..798dda072b2a 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -56,6 +56,7 @@ reg = <0x270 0x240>; #address-cells = <1>; #size-cells = <1>; + ranges = <0 0x270 0x240>; scm_clocks: clocks { #address-cells = <1>; @@ -63,7 +64,7 @@ }; pbias_regulator: pbias_regulator { - compatible = "ti,pbias-omap"; + compatible = "ti,pbias-omap2", "ti,pbias-omap"; reg = <0x230 0x4>; syscon = <&scm_conf>; pbias_mmc_reg: pbias_mmc_omap2430 { diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index a5474113cd50..67659a0ed13e 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -202,7 +202,7 @@ tfp410_pins: pinmux_tfp410_pins { pinctrl-single,pins = < - 0x194 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */ + 0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */ >; }; diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index d5e5cd449b16..2230e1c03320 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -78,12 +78,6 @@ >; }; - smsc9221_pins: pinmux_smsc9221_pins { - pinctrl-single,pins = < - 0x1a2 (PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */ - >; - }; - i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < 0x18a (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi index e458c2185e3c..5ad688c57a00 100644 --- a/arch/arm/boot/dts/omap3-igep0020-common.dtsi +++ b/arch/arm/boot/dts/omap3-igep0020-common.dtsi @@ -156,6 +156,12 @@ OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ >; }; + + smsc9221_pins: pinmux_smsc9221_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */ + >; + }; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 69a40cfc1f29..8a2b25332b8c 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -113,10 +113,22 @@ }; scm_conf: scm_conf@270 { - compatible = "syscon"; + compatible = "syscon", "simple-bus"; reg = <0x270 0x330>; #address-cells = <1>; #size-cells = <1>; + ranges = <0 0x270 0x330>; + + pbias_regulator: pbias_regulator { + compatible = "ti,pbias-omap3", "ti,pbias-omap"; + reg = <0x2b0 0x4>; + syscon = <&scm_conf>; + pbias_mmc_reg: pbias_mmc_omap2430 { + regulator-name = "pbias_mmc_omap2430"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + }; scm_clocks: clocks { #address-cells = <1>; @@ -202,17 +214,6 @@ dma-requests = <96>; }; - pbias_regulator: pbias_regulator { - compatible = "ti,pbias-omap"; - reg = <0x2b0 0x4>; - syscon = <&scm_conf>; - pbias_mmc_reg: pbias_mmc_omap2430 { - regulator-name = "pbias_mmc_omap2430"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - }; - }; - gpio1: gpio@48310000 { compatible = "ti,omap3-gpio"; reg = <0x48310000 0x200>; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index abc4473e6f8a..5a206c100ce2 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -196,9 +196,10 @@ reg = <0x5a0 0x170>; #address-cells = <1>; #size-cells = <1>; + ranges = <0 0x5a0 0x170>; pbias_regulator: pbias_regulator { - compatible = "ti,pbias-omap"; + compatible = "ti,pbias-omap4", "ti,pbias-omap"; reg = <0x60 0x4>; syscon = <&omap4_padconf_global>; pbias_mmc_reg: pbias_mmc_omap4 { diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 3cc8f357d5b8..3cb030f9d2c4 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -174,8 +174,8 @@ i2c5_pins: pinmux_i2c5_pins { pinctrl-single,pins = < - 0x184 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */ - 0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */ + 0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */ + 0x188 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */ >; }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 4205a8ac9ddb..4c04389dab32 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -185,9 +185,10 @@ reg = <0x5a0 0xec>; #address-cells = <1>; #size-cells = <1>; + ranges = <0 0x5a0 0xec>; pbias_regulator: pbias_regulator { - compatible = "ti,pbias-omap"; + compatible = "ti,pbias-omap5", "ti,pbias-omap"; reg = <0x60 0x4>; syscon = <&omap5_padconf_global>; pbias_mmc_reg: pbias_mmc_omap5 { diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index 2fa7a0dc83f7..275c78ccc0f3 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -158,6 +158,7 @@ }; &hdmi { + ddc-i2c-bus = <&i2c5>; status = "okay"; }; diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi index 3efa3b2ebe90..6b914e4bb099 100644 --- a/arch/arm/boot/dts/stih407.dtsi +++ b/arch/arm/boot/dts/stih407.dtsi @@ -103,48 +103,46 @@ <&clk_s_d0_quadfs 0>, <&clk_s_d2_quadfs 0>, <&clk_s_d2_quadfs 0>; - ranges; - - sti-hdmi@8d04000 { - compatible = "st,stih407-hdmi"; - reg = <0x8d04000 0x1000>; - reg-names = "hdmi-reg"; - interrupts = <GIC_SPI 106 IRQ_TYPE_NONE>; - interrupt-names = "irq"; - clock-names = "pix", - "tmds", - "phy", - "audio", - "main_parent", - "aux_parent"; - - clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>, - <&clk_s_d2_flexgen CLK_TMDS_HDMI>, - <&clk_s_d2_flexgen CLK_REF_HDMIPHY>, - <&clk_s_d0_flexgen CLK_PCM_0>, - <&clk_s_d2_quadfs 0>, - <&clk_s_d2_quadfs 1>; - - hdmi,hpd-gpio = <&pio5 3>; - reset-names = "hdmi"; - resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>; - ddc = <&hdmiddc>; - - }; - - sti-hda@8d02000 { - compatible = "st,stih407-hda"; - reg = <0x8d02000 0x400>, <0x92b0120 0x4>; - reg-names = "hda-reg", "video-dacs-ctrl"; - clock-names = "pix", - "hddac", - "main_parent", - "aux_parent"; - clocks = <&clk_s_d2_flexgen CLK_PIX_HDDAC>, - <&clk_s_d2_flexgen CLK_HDDAC>, - <&clk_s_d2_quadfs 0>, - <&clk_s_d2_quadfs 1>; - }; + }; + + sti-hdmi@8d04000 { + compatible = "st,stih407-hdmi"; + reg = <0x8d04000 0x1000>; + reg-names = "hdmi-reg"; + interrupts = <GIC_SPI 106 IRQ_TYPE_NONE>; + interrupt-names = "irq"; + clock-names = "pix", + "tmds", + "phy", + "audio", + "main_parent", + "aux_parent"; + + clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>, + <&clk_s_d2_flexgen CLK_TMDS_HDMI>, + <&clk_s_d2_flexgen CLK_REF_HDMIPHY>, + <&clk_s_d0_flexgen CLK_PCM_0>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 1>; + + hdmi,hpd-gpio = <&pio5 3>; + reset-names = "hdmi"; + resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>; + ddc = <&hdmiddc>; + }; + + sti-hda@8d02000 { + compatible = "st,stih407-hda"; + reg = <0x8d02000 0x400>, <0x92b0120 0x4>; + reg-names = "hda-reg", "video-dacs-ctrl"; + clock-names = "pix", + "hddac", + "main_parent", + "aux_parent"; + clocks = <&clk_s_d2_flexgen CLK_PIX_HDDAC>, + <&clk_s_d2_flexgen CLK_HDDAC>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 1>; }; }; }; diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi index 6f40bc99c22f..8c6e61a27234 100644 --- a/arch/arm/boot/dts/stih410.dtsi +++ b/arch/arm/boot/dts/stih410.dtsi @@ -178,48 +178,46 @@ <&clk_s_d0_quadfs 0>, <&clk_s_d2_quadfs 0>, <&clk_s_d2_quadfs 0>; - ranges; - - sti-hdmi@8d04000 { - compatible = "st,stih407-hdmi"; - reg = <0x8d04000 0x1000>; - reg-names = "hdmi-reg"; - interrupts = <GIC_SPI 106 IRQ_TYPE_NONE>; - interrupt-names = "irq"; - clock-names = "pix", - "tmds", - "phy", - "audio", - "main_parent", - "aux_parent"; - - clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>, - <&clk_s_d2_flexgen CLK_TMDS_HDMI>, - <&clk_s_d2_flexgen CLK_REF_HDMIPHY>, - <&clk_s_d0_flexgen CLK_PCM_0>, - <&clk_s_d2_quadfs 0>, - <&clk_s_d2_quadfs 1>; - - hdmi,hpd-gpio = <&pio5 3>; - reset-names = "hdmi"; - resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>; - ddc = <&hdmiddc>; - - }; - - sti-hda@8d02000 { - compatible = "st,stih407-hda"; - reg = <0x8d02000 0x400>, <0x92b0120 0x4>; - reg-names = "hda-reg", "video-dacs-ctrl"; - clock-names = "pix", - "hddac", - "main_parent", - "aux_parent"; - clocks = <&clk_s_d2_flexgen CLK_PIX_HDDAC>, - <&clk_s_d2_flexgen CLK_HDDAC>, - <&clk_s_d2_quadfs 0>, - <&clk_s_d2_quadfs 1>; - }; + }; + + sti-hdmi@8d04000 { + compatible = "st,stih407-hdmi"; + reg = <0x8d04000 0x1000>; + reg-names = "hdmi-reg"; + interrupts = <GIC_SPI 106 IRQ_TYPE_NONE>; + interrupt-names = "irq"; + clock-names = "pix", + "tmds", + "phy", + "audio", + "main_parent", + "aux_parent"; + + clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>, + <&clk_s_d2_flexgen CLK_TMDS_HDMI>, + <&clk_s_d2_flexgen CLK_REF_HDMIPHY>, + <&clk_s_d0_flexgen CLK_PCM_0>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 1>; + + hdmi,hpd-gpio = <&pio5 3>; + reset-names = "hdmi"; + resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>; + ddc = <&hdmiddc>; + }; + + sti-hda@8d02000 { + compatible = "st,stih407-hda"; + reg = <0x8d02000 0x400>, <0x92b0120 0x4>; + reg-names = "hda-reg", "video-dacs-ctrl"; + clock-names = "pix", + "hddac", + "main_parent", + "aux_parent"; + clocks = <&clk_s_d2_flexgen CLK_PIX_HDDAC>, + <&clk_s_d2_flexgen CLK_HDDAC>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 1>; }; }; diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 50c84e1876fc..3f15a5cae167 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -240,7 +240,8 @@ CONFIG_SSI_PROTOCOL=m CONFIG_PINCTRL_SINGLE=y CONFIG_DEBUG_GPIO=y CONFIG_GPIO_SYSFS=y -CONFIG_GPIO_PCF857X=m +CONFIG_GPIO_PCA953X=m +CONFIG_GPIO_PCF857X=y CONFIG_GPIO_TWL4030=y CONFIG_GPIO_PALMAS=y CONFIG_W1=m @@ -350,6 +351,8 @@ CONFIG_USB_MUSB_HDRC=m CONFIG_USB_MUSB_OMAP2PLUS=m CONFIG_USB_MUSB_AM35X=m CONFIG_USB_MUSB_DSPS=m +CONFIG_USB_INVENTRA_DMA=y +CONFIG_USB_TI_CPPI41_DMA=y CONFIG_USB_DWC3=m CONFIG_USB_TEST=m CONFIG_AM335X_PHY_USB=y diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 07d2e100caab..b3a0dff67e3f 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -44,10 +44,11 @@ config SOC_OMAP5 select ARM_CPU_SUSPEND if PM select ARM_GIC select HAVE_ARM_SCU if SMP - select HAVE_ARM_TWD if SMP select HAVE_ARM_ARCH_TIMER select ARM_ERRATA_798181 if SMP + select OMAP_INTERCONNECT select OMAP_INTERCONNECT_BARRIER + select PM_OPP if PM config SOC_AM33XX bool "TI AM33XX" @@ -70,10 +71,13 @@ config SOC_DRA7XX select ARCH_OMAP2PLUS select ARM_CPU_SUSPEND if PM select ARM_GIC + select HAVE_ARM_SCU if SMP select HAVE_ARM_ARCH_TIMER select IRQ_CROSSBAR select ARM_ERRATA_798181 if SMP + select OMAP_INTERCONNECT select OMAP_INTERCONNECT_BARRIER + select PM_OPP if PM config ARCH_OMAP2PLUS bool diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 24c9afc9e8a7..6133eaac685d 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -20,13 +20,6 @@ #include "common.h" -#if !(defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)) -#define intc_of_init NULL -#endif -#ifndef CONFIG_ARCH_OMAP4 -#define gic_of_init NULL -#endif - static const struct of_device_id omap_dt_match_table[] __initconst = { { .compatible = "simple-bus", }, { .compatible = "ti,omap-infra", }, diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index e3f713ffb06b..54a5ba54d2ff 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -653,8 +653,12 @@ void __init dra7xxx_check_revision(void) omap_revision = DRA752_REV_ES1_0; break; case 1: - default: omap_revision = DRA752_REV_ES1_1; + break; + case 2: + default: + omap_revision = DRA752_REV_ES2_0; + break; } break; @@ -674,7 +678,7 @@ void __init dra7xxx_check_revision(void) /* Unknown default to latest silicon rev as default*/ pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%x)\n", __func__, idcode, hawkeye, rev); - omap_revision = DRA752_REV_ES1_1; + omap_revision = DRA752_REV_ES2_0; } sprintf(soc_name, "DRA%03x", omap_rev() >> 16); diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 980c9372e6fd..3eaeaca5da05 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -676,6 +676,7 @@ void __init am43xx_init_early(void) void __init am43xx_init_late(void) { omap_common_late_init(); + omap2_clk_enable_autoidle_all(); } #endif diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 4cb8fd9f741f..72ebc4c16bae 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -901,7 +901,8 @@ static int __init omap_device_late_idle(struct device *dev, void *data) if (od->hwmods[i]->flags & HWMOD_INIT_NO_IDLE) return 0; - if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER) { + if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER && + od->_driver_status != BUS_NOTIFY_BIND_DRIVER) { if (od->_state == OMAP_DEVICE_STATE_ENABLED) { dev_warn(dev, "%s: enabled but no driver. Idling\n", __func__); diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 425bfcd67db6..b668719b9b25 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -103,7 +103,8 @@ static inline void enable_omap3630_toggle_l2_on_restore(void) { } #define PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD (1 << 0) #define PM_OMAP4_CPU_OSWR_DISABLE (1 << 1) -#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP4) +#if defined(CONFIG_PM) && (defined(CONFIG_ARCH_OMAP4) ||\ + defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX)) extern u16 pm44xx_errata; #define IS_PM44XX_ERRATUM(id) (pm44xx_errata & (id)) #else diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index f97654d11ea5..2d1d3845253c 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -469,6 +469,8 @@ IS_OMAP_TYPE(3430, 0x3430) #define DRA7XX_CLASS 0x07000000 #define DRA752_REV_ES1_0 (DRA7XX_CLASS | (0x52 << 16) | (0x10 << 8)) #define DRA752_REV_ES1_1 (DRA7XX_CLASS | (0x52 << 16) | (0x11 << 8)) +#define DRA752_REV_ES2_0 (DRA7XX_CLASS | (0x52 << 16) | (0x20 << 8)) +#define DRA722_REV_ES1_0 (DRA7XX_CLASS | (0x22 << 16) | (0x10 << 8)) #define DRA722_REV_ES1_0 (DRA7XX_CLASS | (0x22 << 16) | (0x10 << 8)) void omap2xxx_check_revision(void); diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index e4d8701f99f9..a55655127ef2 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -297,12 +297,8 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, if (IS_ERR(src)) return PTR_ERR(src); - r = clk_set_parent(timer->fclk, src); - if (r < 0) { - pr_warn("%s: %s cannot set source\n", __func__, oh->name); - clk_put(src); - return r; - } + WARN(clk_set_parent(timer->fclk, src) < 0, + "Cannot set timer parent clock, no PLL clock driver?"); clk_put(src); diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index e5a35f6b83a7..d44d311704ba 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -300,7 +300,7 @@ static void __init omap3_vc_init_pmic_signaling(struct voltagedomain *voltdm) val = voltdm->read(OMAP3_PRM_POLCTRL_OFFSET); if (!(val & OMAP3430_PRM_POLCTRL_CLKREQ_POL) || - (val & OMAP3430_PRM_POLCTRL_CLKREQ_POL)) { + (val & OMAP3430_PRM_POLCTRL_OFFMODE_POL)) { val |= OMAP3430_PRM_POLCTRL_CLKREQ_POL; val &= ~OMAP3430_PRM_POLCTRL_OFFMODE_POL; pr_debug("PM: fixing sys_clkreq and sys_off_mode polarity to 0x%x\n", diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig index d8de6a8dd4de..665efca59487 100644 --- a/drivers/firmware/Kconfig +++ b/drivers/firmware/Kconfig @@ -139,6 +139,14 @@ config QCOM_SCM bool depends on ARM || ARM64 +config QCOM_SCM_32 + def_bool y + depends on QCOM_SCM && ARM + +config QCOM_SCM_64 + def_bool y + depends on QCOM_SCM && ARM64 + source "drivers/firmware/broadcom/Kconfig" source "drivers/firmware/google/Kconfig" source "drivers/firmware/efi/Kconfig" diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile index 000830fc6707..2ee83474a3c1 100644 --- a/drivers/firmware/Makefile +++ b/drivers/firmware/Makefile @@ -13,7 +13,8 @@ obj-$(CONFIG_ISCSI_IBFT_FIND) += iscsi_ibft_find.o obj-$(CONFIG_ISCSI_IBFT) += iscsi_ibft.o obj-$(CONFIG_FIRMWARE_MEMMAP) += memmap.o obj-$(CONFIG_QCOM_SCM) += qcom_scm.o -obj-$(CONFIG_QCOM_SCM) += qcom_scm-32.o +obj-$(CONFIG_QCOM_SCM_64) += qcom_scm-64.o +obj-$(CONFIG_QCOM_SCM_32) += qcom_scm-32.o CFLAGS_qcom_scm-32.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1) obj-y += broadcom/ diff --git a/drivers/firmware/qcom_scm-64.c b/drivers/firmware/qcom_scm-64.c new file mode 100644 index 000000000000..bb6555f6d63b --- /dev/null +++ b/drivers/firmware/qcom_scm-64.c @@ -0,0 +1,63 @@ +/* Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/io.h> +#include <linux/errno.h> +#include <linux/qcom_scm.h> + +/** + * qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus + * @entry: Entry point function for the cpus + * @cpus: The cpumask of cpus that will use the entry point + * + * Set the cold boot address of the cpus. Any cpu outside the supported + * range would be removed from the cpu present mask. + */ +int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus) +{ + return -ENOTSUPP; +} + +/** + * qcom_scm_set_warm_boot_addr() - Set the warm boot address for cpus + * @entry: Entry point function for the cpus + * @cpus: The cpumask of cpus that will use the entry point + * + * Set the Linux entry point for the SCM to transfer control to when coming + * out of a power down. CPU power down may be executed on cpuidle or hotplug. + */ +int __qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus) +{ + return -ENOTSUPP; +} + +/** + * qcom_scm_cpu_power_down() - Power down the cpu + * @flags - Flags to flush cache + * + * This is an end point to power down cpu. If there was a pending interrupt, + * the control would return from this function, otherwise, the cpu jumps to the + * warm boot entry point set for this cpu upon reset. + */ +void __qcom_scm_cpu_power_down(u32 flags) +{ +} + +int __qcom_scm_is_call_available(u32 svc_id, u32 cmd_id) +{ + return -ENOTSUPP; +} + +int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp) +{ + return -ENOTSUPP; +} diff --git a/drivers/regulator/pbias-regulator.c b/drivers/regulator/pbias-regulator.c index 4fa7bcaf454e..f9d74d63be7c 100644 --- a/drivers/regulator/pbias-regulator.c +++ b/drivers/regulator/pbias-regulator.c @@ -45,6 +45,10 @@ struct pbias_regulator_data { int voltage; }; +struct pbias_of_data { + unsigned int offset; +}; + static const unsigned int pbias_volt_table[] = { 1800000, 3000000 @@ -102,8 +106,35 @@ static struct of_regulator_match pbias_matches[] = { }; #define PBIAS_NUM_REGS ARRAY_SIZE(pbias_matches) +/* Offset from SCM general area (and syscon) base */ + +static const struct pbias_of_data pbias_of_data_omap2 = { + .offset = 0x230, +}; + +static const struct pbias_of_data pbias_of_data_omap3 = { + .offset = 0x2b0, +}; + +static const struct pbias_of_data pbias_of_data_omap4 = { + .offset = 0x60, +}; + +static const struct pbias_of_data pbias_of_data_omap5 = { + .offset = 0x60, +}; + +static const struct pbias_of_data pbias_of_data_dra7 = { + .offset = 0xe00, +}; + static const struct of_device_id pbias_of_match[] = { { .compatible = "ti,pbias-omap", }, + { .compatible = "ti,pbias-omap2", .data = &pbias_of_data_omap2, }, + { .compatible = "ti,pbias-omap3", .data = &pbias_of_data_omap3, }, + { .compatible = "ti,pbias-omap4", .data = &pbias_of_data_omap4, }, + { .compatible = "ti,pbias-omap5", .data = &pbias_of_data_omap5, }, + { .compatible = "ti,pbias-dra7", .data = &pbias_of_data_dra7, }, {}, }; MODULE_DEVICE_TABLE(of, pbias_of_match); @@ -118,6 +149,9 @@ static int pbias_regulator_probe(struct platform_device *pdev) const struct pbias_reg_info *info; int ret = 0; int count, idx, data_idx = 0; + const struct of_device_id *match; + const struct pbias_of_data *data; + unsigned int offset; count = of_regulator_match(&pdev->dev, np, pbias_matches, PBIAS_NUM_REGS); @@ -133,6 +167,20 @@ static int pbias_regulator_probe(struct platform_device *pdev) if (IS_ERR(syscon)) return PTR_ERR(syscon); + match = of_match_device(of_match_ptr(pbias_of_match), &pdev->dev); + if (match && match->data) { + data = match->data; + offset = data->offset; + } else { + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -EINVAL; + + offset = res->start; + dev_WARN(&pdev->dev, + "using legacy dt data for pbias offset\n"); + } + cfg.regmap = syscon; cfg.dev = &pdev->dev; @@ -145,10 +193,6 @@ static int pbias_regulator_probe(struct platform_device *pdev) if (!info) return -ENODEV; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -EINVAL; - drvdata[data_idx].syscon = syscon; drvdata[data_idx].info = info; drvdata[data_idx].desc.name = info->name; @@ -158,9 +202,9 @@ static int pbias_regulator_probe(struct platform_device *pdev) drvdata[data_idx].desc.volt_table = pbias_volt_table; drvdata[data_idx].desc.n_voltages = 2; drvdata[data_idx].desc.enable_time = info->enable_time; - drvdata[data_idx].desc.vsel_reg = res->start; + drvdata[data_idx].desc.vsel_reg = offset; drvdata[data_idx].desc.vsel_mask = info->vmode; - drvdata[data_idx].desc.enable_reg = res->start; + drvdata[data_idx].desc.enable_reg = offset; drvdata[data_idx].desc.enable_mask = info->enable_mask; drvdata[data_idx].desc.enable_val = info->enable; drvdata[data_idx].desc.disable_val = info->disable_val; |