summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-07-07Merge tag 'samsung-fixes-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Merge "Samsung fixes-2 for v3.16" from Kukjin Kim: - fix the check for SMP configuration with using CONFIG_SMP not just SMP - fix the number of pwm-cells for exynos4 pwm - fix ftrace for exynos_mct - register exynos_mct for stable udely - fix secondary boot addr for secure mode for exynos SoCs * tag 'samsung-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Update secondary boot addr for secure mode clocksource: exynos_mct: Register the timer for stable udelay clocksource: exynos_mct: Fix ftrace ARM: dts: fix pwm-cells in pwm node for exynos4 ARM: EXYNOS: Fix the check for non-smp configuration Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-07Merge tag 'renesas-maintainers-for-v3.17' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Pull "Renesas ARM Based SoC Maintainers Updates for v3.17" from Simon Horman: * Expand ARM/SHMOBILE maintainers entry to cover DT and defconfig files. * tag 'renesas-maintainers-for-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: Add DT and defconfigs to MAINTAINERS Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-07net: qmi_wwan: Add ID for Telewell TW-LTE 4G v2Bernd Wachter
There's a new version of the Telewell 4G modem working with, but not recognized by this driver. Signed-off-by: Bernd Wachter <bernd.wachter@jolla.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08drm/nouveau/ram: fix test for gpio presenceBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-07-08drm/nouveau/dp: workaround broken displayBen Skeggs
The display in fdo#76483 pulses the hotplug line for link retraining after we cut power to the main link on the source, even while it's in D3. fdo#76483 Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-07-08drm/nouveau/dp: fix required link bandwidth calculationsBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-07-08drm/nouveau/kms: restore fbcon after display has been resumedBen Skeggs
Under some complicated circumstances (boot, suspend, resume, attach second display, suspend, resume, suspend, detach second display, resume, suspend, attach second display, resume), the fb_set_suspend() call can somehow result in a modeset being attempted before we're ready for it and things blow up in fun ways. Running display init first fixes the issue. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-07-08drm/nv50-/kms: pass a non-zero value for head to sor dpms methodsBen Skeggs
There's Apple machines out there which (probably completely arbitrarily) restrict each output path to a particular head. This causes us to not be able to locate the output data needed to power on/off the DP output correctly. We fix this by passing in a head index we know is valid (as opposed to "head 0"). Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-07-08drm/nouveau/fb: Prevent inlining of ramfuc_regStéphane Marchesin
When gcc 4.8 inlines this function, it eats up 16 bytes on the stack every time. Eventually we hit warnings because our stack grew too much: ramnve0.c:1383:1: error: the frame size of 1496 bytes is larger than 1024 bytes We fix this by preventing inlining for this function. Signed-off-by: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-07-08drm/gk104/ram: bash mpll bit 31 onBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-07-07Revert "net: stmmac: add platform init/exit for Altera's ARM socfpga"David S. Miller
This reverts commit 0acf16768740776feffac506ce93b1c06c059ac6. Breaks the build due to missing reference to phy_resume in the resulting dwmac-socfpga.o object. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07powerpc/ucc_geth: deal with a compile warningZhao Qiang
deal with a compile warning: comparison between 'enum qe_fltr_largest_external_tbl_lookup_key_size' and 'enum qe_fltr_tbl_lookup_key_size' the code: "if (ug_info->largestexternallookupkeysize == QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES)" is warned because different enum, so modify it. "enum qe_fltr_largest_external_tbl_lookup_key_size largestexternallookupkeysize; enum qe_fltr_tbl_lookup_key_size { QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES = 0x3f, /* LookupKey parsed by the Generate LookupKey CMD is truncated to 8 bytes */ QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES = 0x5f, /* LookupKey parsed by the Generate LookupKey CMD is truncated to 16 bytes */ }; /* QE FLTR extended filtering Largest External Table Lookup Key Size */ enum qe_fltr_largest_external_tbl_lookup_key_size { QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_NONE = 0x0,/* not used */ QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_8_BYTES = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES, /* 8 bytes */ QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_16_BYTES = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES, /* 16 bytes */ };" Signed-off-by: Zhao Qiang <B45475@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07Merge branch 'net_ovs_fixes' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/pshelar/openvswitch Pravin B Shelar says: ==================== Open vSwitch A set of fixes for net. First bug is related flow-table management. Second one is in sample action. Third is related flow stats and last one add gre-err handler for ovs. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07net: Performance fix for process_backlogTom Herbert
In process_backlog the input_pkt_queue is only checked once for new packets and quota is artificially reduced to reflect precisely the number of packets on the input_pkt_queue so that the loop exits appropriately. This patches changes the behavior to be more straightforward and less convoluted. Packets are processed until either the quota is met or there are no more packets to process. This patch seems to provide a small, but noticeable performance improvement. The performance improvement is a result of staying in the process_backlog loop longer which can reduce number of IPI's. Performance data using super_netperf TCP_RR with 200 flows: Before fix: 88.06% CPU utilization 125/190/309 90/95/99% latencies 1.46808e+06 tps 1145382 intrs.sec. With fix: 87.73% CPU utilization 122/183/296 90/95/99% latencies 1.4921e+06 tps 1021674.30 intrs./sec. Signed-off-by: Tom Herbert <therbert@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07ipv4: icmp: Fix pMTU handling for rare caseEdward Allcutt
Some older router implementations still send Fragmentation Needed errors with the Next-Hop MTU field set to zero. This is explicitly described as an eventuality that hosts must deal with by the standard (RFC 1191) since older standards specified that those bits must be zero. Linux had a generic (for all of IPv4) implementation of the algorithm described in the RFC for searching a list of MTU plateaus for a good value. Commit 46517008e116 ("ipv4: Kill ip_rt_frag_needed().") removed this as part of the changes to remove the routing cache. Subsequently any Fragmentation Needed packet with a zero Next-Hop MTU has been discarded without being passed to the per-protocol handlers or notifying userspace for raw sockets. When there is a router which does not implement RFC 1191 on an MTU limited path then this results in stalled connections since large packets are discarded and the local protocols are not notified so they never attempt to lower the pMTU. One example I have seen is an OpenBSD router terminating IPSec tunnels. It's worth pointing out that this case is distinct from the BSD 4.2 bug which incorrectly calculated the Next-Hop MTU since the commit in question dismissed that as a valid concern. All of the per-protocols handlers implement the simple approach from RFC 1191 of immediately falling back to the minimum value. Although this is sub-optimal it is vastly preferable to connections hanging indefinitely. Remove the Next-Hop MTU != 0 check and allow such packets to follow the normal path. Fixes: 46517008e116 ("ipv4: Kill ip_rt_frag_needed().") Signed-off-by: Edward Allcutt <edward.allcutt@openmarket.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08ARM: dts: Update the parent for Audss clocks in Exynos5420Tushar Behera
Currently CLK_FOUT_EPLL was set as one of the parents of AUDSS mux. As per the user manual, it should be CLK_MAU_EPLL. The problem surfaced when the bootloader in Peach-pit board set the EPLL clock as the parent of AUDSS mux. While booting the kernel, we used to get a system hang during late boot if CLK_MAU_EPLL was disabled. Signed-off-by: Tushar Behera <tushar.b@samsung.com> Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Reported-by: Kevin Hilman <khilman@linaro.org> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-08ARM: EXYNOS: Update secondary boot addr for secure modeSachin Kamat
Almost all Exynos-series of SoCs that run in secure mode don't need additional offset for every CPU, with Exynos4412 being the only exception. Tested on Origen-Quad (Exynos4412) and Arndale-Octa (Exynos5420). While at it, fix the coding style (space around *). Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Tested-by: Andreas Faerber <afaerber@suse.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-07ACPI / video: Add Acer TravelMate B113 to native backlight blacklistMartin Kepplinger
Fix backlight control for Acer TravelMate B113 Laptop by adding it to the video_dmi_table. A workaround before that was to use acpi_osi=Linux or acpi_backlight=vendor on boot but even then, only the function- keys worked. With this change there is no need for boot parameters and DE's controls work as well. Signed-off-by: Martin Kepplinger <martink@posteo.de> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-07ACPI / video: Add Dell Inspiron 5737 to the blacklistEdward Lin
With win8 capabiltiy, the ACPI backlight control is broken. The system also loses backlight setting when resuming from S3. Add this model to the the ACPI video detect blacklist to make backlight functionality work. Although backlight functionality works via video.use_native_backlight=1, this approach may be safer. Signed-off-by: Edward Lin <yidi.lin@canonical.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-07ACPI / i915: ignore firmware requests for backlight changeAaron Lu
Some Thinkpad laptops' firmware will initiate a backlight level change request through operation region on the events of AC plug/unplug, but since we are not using firmware's interface to do the backlight setting on these affected laptops, we do not want the firmware to use some arbitrary value from its ASL variable to set the backlight level on AC plug/unplug either. Link: https://bugzilla.kernel.org/show_bug.cgi?id=76491 Link: https://bugzilla.kernel.org/show_bug.cgi?id=77091 Reported-and-tested-by: Igor Gnatenko <i.gnatenko.brain@gmail.com> Reported-and-tested-by: Anton Gubarkov <anton.gubarkov@gmail.com> Signed-off-by: Aaron Lu <aaron.lu@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-07ACPI / battery: fix wrong value of capacity_now reported when fully chargedJosef Gajdusek
It seems that some batteries (noticed on DELL JYPJ136) assume capacity_now = design_capacity when fully charged. This causes reported capacity to suddenly jump to >full_charge_capacity (and that means capacity reported to userspace is >100% and incorrect) values after 99%. This patch detects capacity_now > full_charge_capacity, notifies userspace (unless it is the known bug where capacity_now == design_capacity) and trims the value to full_charge_capacity. Signed-off-by: Josef Gajdusek <atx@atx.name> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-07KVM: PPC: RTAS: Do byte swaps explicitlyAlexander Graf
In commit b59d9d26b we introduced implicit byte swaps for RTAS calls. Unfortunately we messed up and didn't swizzle return values properly. Also the old approach wasn't "sparse" compatible - we were randomly reading __be32 values on an LE system. Let's just do all of the swizzling explicitly with byte swaps right where values get used. That way we can at least catch bugs using sparse. This patch fixes XICS RTAS emulation on little endian hosts for me. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-07-07Merge branch 'for-rc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal fixes from Zhang Rui: "Specifics: - update Email address of Thermal subsystem maintainer Eduardo Valentin. - fix a problem that unloading thermal module results in kernel crash because a non-exist device file is removed on thermal unload. - fix a problem that critical trip point is set wrongly on latest i.MX6 SOC and results in system critical shutdown. - a couple of fixes to Tmon tool, of-thermal code and ti thermal driver" * 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: tmon: set umask to a reasonable value tmon: Check log file for common secuirty issues tools/thermal: tmon: fix compilation errors when building statically thermal: ti-soc-thermal: ti-bandgap.c: Cleaning up wrong address is checked Thermal: imx: correct critical trip temperature setting thermal: Bind cooling devices with the correct arguments thermal: Add braces around suspect code thermal: hwmon: Make the check for critical temp valid consistent MAINTAINERS: Update Eduardo Valentin's email address
2014-07-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: "A few tiny HID subsystem fixes for 3.16" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: use multi input quirk for 22b9:2968 HID: sensor-hub: fix potential memory leak HID: usbhid: quirk for PM1610 and PM1640 Touchscreen. HID: rmi: Protect PM-only functions by #ifdef CONFIG_PM HID: sensor-hub: introduce Kconfig dependency on IOMEM HID: sensor-hub: make dyn_callback_lock IRQ-safe
2014-07-07Merge tag 'pinctrl-v3.16-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Two fixes for the pin control subsystem, both relating to the error path in probe() I'm a bit snowed under by mail but these have boiled in linux-next and should propagate to you" * tag 'pinctrl-v3.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: berlin: fix an error code in berlin_pinctrl_probe() pinctrl: sunxi: Fix potential null pointer dereference
2014-07-07ACPI / resources: only reject zero length resources based at address zeroAndy Whitcroft
The recently merged change (in v3.14-rc6) to ACPI resource detection (below) causes all zero length ACPI resources to be elided from the table: commit b355cee88e3b1a193f0e9a81db810f6f83ad728b Author: Zhang Rui <rui.zhang@intel.com> Date: Thu Feb 27 11:37:15 2014 +0800 ACPI / resources: ignore invalid ACPI device resources This change has caused a regression in (at least) serial port detection for a number of machines (see LP#1313981 [1]). These seem to represent their IO regions (presumably incorrectly) as a zero length region. Reverting the above commit restores these serial devices. Only elide zero length resources which lie at address 0. Fixes: b355cee88e3b (ACPI / resources: ignore invalid ACPI device resources) Signed-off-by: Andy Whitcroft <apw@canonical.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Cc: 3.14+ <stable@vger.kernel.org> # 3.14+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-07rt2800usb: Don't perform DMA from stackAndrea Merello
Function rt2800usb_autorun_detect() passes the address of a variable allocated onto the stack to be used for DMA by the USB layer. This has been caught by my debugging-enabled kernel. This patch change things in order to allocate that variable via kmalloc, and it adjusts things to handle the kmalloc failure case, propagating the error. [ 7363.238852] ------------[ cut here ]------------ [ 7363.243529] WARNING: CPU: 1 PID: 5235 at lib/dma-debug.c:1153 check_for_stack+0xa4/0xf0() [ 7363.251759] ehci-pci 0000:00:04.1: DMA-API: device driver maps memory fromstack [addr=ffff88006b81bad4] [ 7363.261210] Modules linked in: rt2800usb(O+) rt2800lib(O) rt2x00usb(O) rt2x00lib(O) rtl818x_pci(O) rtl8187 led_class eeprom_93cx6 mac80211 cfg80211 [last unloaded: rt2x00lib] [ 7363.277143] CPU: 1 PID: 5235 Comm: systemd-udevd Tainted: G O 3.16.0-rc3-wl+ #31 [ 7363.285546] Hardware name: System manufacturer System Product Name/M3N78 PRO, BIOS ASUS M3N78 PRO ACPI BIOS Revision 1402 12/04/2009 [ 7363.297511] 0000000000000009 ffff88006b81b710 ffffffff8175dcad ffff88006b81b758 [ 7363.305062] ffff88006b81b748 ffffffff8106d372 ffff88006cf10098 ffff88006cead6a0 [ 7363.312622] ffff88006b81bad4 ffffffff81c1e7c0 ffff88006cf10098 ffff88006b81b7a8 [ 7363.320161] Call Trace: [ 7363.322661] [<ffffffff8175dcad>] dump_stack+0x4d/0x6f [ 7363.327847] [<ffffffff8106d372>] warn_slowpath_common+0x82/0xb0 [ 7363.333893] [<ffffffff8106d3e7>] warn_slowpath_fmt+0x47/0x50 [ 7363.339686] [<ffffffff813a93b4>] check_for_stack+0xa4/0xf0 [ 7363.345298] [<ffffffff813a995c>] debug_dma_map_page+0x10c/0x150 [ 7363.351367] [<ffffffff81521bd9>] usb_hcd_map_urb_for_dma+0x229/0x720 [ 7363.357890] [<ffffffff8152256d>] usb_hcd_submit_urb+0x2fd/0x930 [ 7363.363929] [<ffffffff810eac31>] ? irq_work_queue+0x71/0xd0 [ 7363.369617] [<ffffffff810ab5a7>] ? wake_up_klogd+0x37/0x50 [ 7363.375219] [<ffffffff810ab7a5>] ? console_unlock+0x1e5/0x420 [ 7363.381081] [<ffffffff810abc25>] ? vprintk_emit+0x245/0x530 [ 7363.386773] [<ffffffff81523d3c>] usb_submit_urb+0x30c/0x580 [ 7363.392462] [<ffffffff81524295>] usb_start_wait_urb+0x65/0xf0 [ 7363.398325] [<ffffffff815243ed>] usb_control_msg+0xcd/0x110 [ 7363.404014] [<ffffffffa005514d>] rt2x00usb_vendor_request+0xbd/0x170 [rt2x00usb] [ 7363.411544] [<ffffffffa0074292>] rt2800usb_autorun_detect+0x32/0x50 [rt2800usb] [ 7363.418986] [<ffffffffa0074aa1>] rt2800usb_read_eeprom+0x11/0x70 [rt2800usb] [ 7363.426168] [<ffffffffa0063ffd>] rt2800_probe_hw+0x11d/0xf90 [rt2800lib] [ 7363.432989] [<ffffffffa0074b7d>] rt2800usb_probe_hw+0xd/0x50 [rt2800usb] [ 7363.439808] [<ffffffffa00453d8>] rt2x00lib_probe_dev+0x238/0x7c0 [rt2x00lib] [ 7363.446992] [<ffffffffa00bfa48>] ? ieee80211_led_names+0xb8/0x100 [mac80211] [ 7363.454156] [<ffffffffa0056116>] rt2x00usb_probe+0x156/0x1f0 [rt2x00usb] [ 7363.460971] [<ffffffffa0074250>] rt2800usb_probe+0x10/0x20 [rt2800usb] [ 7363.467616] [<ffffffff8152799e>] usb_probe_interface+0xce/0x1c0 [ 7363.473651] [<ffffffff81480c20>] really_probe+0x70/0x240 [ 7363.479079] [<ffffffff81480f01>] __driver_attach+0xa1/0xb0 [ 7363.484682] [<ffffffff81480e60>] ? __device_attach+0x70/0x70 [ 7363.490461] [<ffffffff8147eef3>] bus_for_each_dev+0x63/0xa0 [ 7363.496146] [<ffffffff814807c9>] driver_attach+0x19/0x20 [ 7363.501570] [<ffffffff81480468>] bus_add_driver+0x178/0x220 [ 7363.507270] [<ffffffff8148151b>] driver_register+0x5b/0xe0 [ 7363.512874] [<ffffffff815271b0>] usb_register_driver+0xa0/0x170 [ 7363.518905] [<ffffffffa007a000>] ? 0xffffffffa0079fff [ 7363.524074] [<ffffffffa007a01e>] rt2800usb_driver_init+0x1e/0x20 [rt2800usb] [ 7363.531247] [<ffffffff810002d4>] do_one_initcall+0x84/0x1b0 [ 7363.536932] [<ffffffff8113aa60>] ? kfree+0xd0/0x110 [ 7363.541931] [<ffffffff8112730a>] ? __vunmap+0xaa/0xf0 [ 7363.547538] [<ffffffff810ca07e>] load_module+0x1aee/0x2040 [ 7363.553141] [<ffffffff810c6f10>] ? store_uevent+0x50/0x50 [ 7363.558676] [<ffffffff810ca66e>] SyS_init_module+0x9e/0xc0 [ 7363.564285] [<ffffffff81764012>] system_call_fastpath+0x16/0x1b [ 7363.570338] ---[ end trace 01ef5f822bea9882 ]--- Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-07Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
2014-07-07nfsd: Fix bad reserving space for encoding rdattr_errorKinglong Mee
Introduced by commit 561f0ed498 (nfsd4: allow large readdirs). Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-07-07ARM: l2c: fix revision checkingRussell King
The revision checking in l2c310_enable() was not correct; we were masking the part number rather than the revision number. Fix this to use the correct macro. Fixes: 4374d64933b1 ("ARM: l2c: add automatic enable of early BRESP") Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-07-07hwmon: (adc128d818) Drop write support on inX_input attributesGuenter Roeck
Writes into input registers doesn't make sense, even more so since the writes actually ended up writing into the maximum limit registers. Drop it. Cc: stable@vger.kernel.org Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-07-07tools/liblockdep: Account for bitfield changes in lockdeps lock_acquireS. Lockwood-Childs
Commit fb9edbe984 shortened held_lock->check from a 2-bit field to a 1-bit field. Make liblockdep compatible with the new definition by passing check=1 to lock_acquire() calls, rather than the old value check=2 (which inadvertently disabled checks by overflowing to 0). Without this fix, several of the test cases in liblockdep run_tests.sh were failing. Signed-off-by: S. Lockwood-Childs <sjl@vctlabs.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2014-07-07tools/liblockdep: Remove debug print left over from developmentSasha Levin
Remove a debug print in init_preload() which was left over from development and isn't usefull at all currently. It was also causing false positive test results. Reported-by: S. Lockwood-Childs <sjl@vctlabs.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2014-07-07tools/liblockdep: Fix comparison of a boolean value with a value of 2zhangdianfang
Comparison of a boolean value (!__init_state) with a value of 2 (done) as currently happens in the code is unlikely to succeed and causes repeated initialization of the pthread function pointers. Instead, remove boolean comparison so that we would initialize said function pointers only once. Ref: https://bugzilla.kernel.org/show_bug.cgi?id=76741 Cc: Jean Delvare <jdelvare@suse.de> Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Dianfang Zhang <zhangdianfang@huawei.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2014-07-07hwmon: (emc2103) Clamp limits instead of bailing outGuenter Roeck
It is customary to clamp limits instead of bailing out with an error if a configured limit is out of the range supported by the driver. This simplifies limit configuration, since the user will not typically know chip and/or driver specific limits. Reviewed-by: Jean Delvare <jdelvare@suse.de> Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-07-07workqueue: zero cpumask of wq_numa_possible_cpumask on initYasuaki Ishimatsu
When hot-adding and onlining CPU, kernel panic occurs, showing following call trace. BUG: unable to handle kernel paging request at 0000000000001d08 IP: [<ffffffff8114acfd>] __alloc_pages_nodemask+0x9d/0xb10 PGD 0 Oops: 0000 [#1] SMP ... Call Trace: [<ffffffff812b8745>] ? cpumask_next_and+0x35/0x50 [<ffffffff810a3283>] ? find_busiest_group+0x113/0x8f0 [<ffffffff81193bc9>] ? deactivate_slab+0x349/0x3c0 [<ffffffff811926f1>] new_slab+0x91/0x300 [<ffffffff815de95a>] __slab_alloc+0x2bb/0x482 [<ffffffff8105bc1c>] ? copy_process.part.25+0xfc/0x14c0 [<ffffffff810a3c78>] ? load_balance+0x218/0x890 [<ffffffff8101a679>] ? sched_clock+0x9/0x10 [<ffffffff81105ba9>] ? trace_clock_local+0x9/0x10 [<ffffffff81193d1c>] kmem_cache_alloc_node+0x8c/0x200 [<ffffffff8105bc1c>] copy_process.part.25+0xfc/0x14c0 [<ffffffff81114d0d>] ? trace_buffer_unlock_commit+0x4d/0x60 [<ffffffff81085a80>] ? kthread_create_on_node+0x140/0x140 [<ffffffff8105d0ec>] do_fork+0xbc/0x360 [<ffffffff8105d3b6>] kernel_thread+0x26/0x30 [<ffffffff81086652>] kthreadd+0x2c2/0x300 [<ffffffff81086390>] ? kthread_create_on_cpu+0x60/0x60 [<ffffffff815f20ec>] ret_from_fork+0x7c/0xb0 [<ffffffff81086390>] ? kthread_create_on_cpu+0x60/0x60 In my investigation, I found the root cause is wq_numa_possible_cpumask. All entries of wq_numa_possible_cpumask is allocated by alloc_cpumask_var_node(). And these entries are used without initializing. So these entries have wrong value. When hot-adding and onlining CPU, wq_update_unbound_numa() is called. wq_update_unbound_numa() calls alloc_unbound_pwq(). And alloc_unbound_pwq() calls get_unbound_pool(). In get_unbound_pool(), worker_pool->node is set as follow: 3592 /* if cpumask is contained inside a NUMA node, we belong to that node */ 3593 if (wq_numa_enabled) { 3594 for_each_node(node) { 3595 if (cpumask_subset(pool->attrs->cpumask, 3596 wq_numa_possible_cpumask[node])) { 3597 pool->node = node; 3598 break; 3599 } 3600 } 3601 } But wq_numa_possible_cpumask[node] does not have correct cpumask. So, wrong node is selected. As a result, kernel panic occurs. By this patch, all entries of wq_numa_possible_cpumask are allocated by zalloc_cpumask_var_node to initialize them. And the panic disappeared. Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org Fixes: bce903809ab3 ("workqueue: add wq_numa_tbl_len and wq_numa_possible_cpumask[]")
2014-07-07HID: use multi input quirk for 22b9:2968Wen-chien Jesse Sung
This device generates ABS_Z and ABS_RX events instead of ABS_X and ABS_Y. Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-07-07fuse: avoid scheduling while atomicMiklos Szeredi
As reported by Richard Sharpe, an attempt to use fuse_notify_inval_entry() triggers complains about scheduling while atomic: BUG: scheduling while atomic: fuse.hf/13976/0x10000001 This happens because fuse_notify_inval_entry() attempts to allocate memory with GFP_KERNEL, holding "struct fuse_copy_state" mapped by kmap_atomic(). Introduced by commit 58bda1da4b3c "fuse/dev: use atomic maps" Fix by moving the map/unmap to just cover the actual memcpy operation. Original patch from Maxim Patlasov <mpatlasov@parallels.com> Reported-by: Richard Sharpe <realrichardsharpe@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: <stable@vger.kernel.org> # v3.15+
2014-07-07fuse: handle large user and group IDMiklos Szeredi
If the number in "user_id=N" or "group_id=N" mount options was larger than INT_MAX then fuse returned EINVAL. Fix this to handle all valid uid/gid values. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: stable@vger.kernel.org
2014-07-07fuse: inode: drop castHimangi Saraogi
This patch removes the cast on data of type void * as it is not needed. The following Coccinelle semantic patch was used for making the change: @r@ expression x; void* e; type T; identifier f; @@ ( *((T *)e) | ((T *)x)[...] | ((T *)x)->f | - (T *) e ) Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-07-07fuse: ignore entry-timeout on LOOKUP_REVALAnand Avati
The following test case demonstrates the bug: sh# mount -t glusterfs localhost:meta-test /mnt/one sh# mount -t glusterfs localhost:meta-test /mnt/two sh# echo stuff > /mnt/one/file; rm -f /mnt/two/file; echo stuff > /mnt/one/file bash: /mnt/one/file: Stale file handle sh# echo stuff > /mnt/one/file; rm -f /mnt/two/file; sleep 1; echo stuff > /mnt/one/file On the second open() on /mnt/one, FUSE would have used the old nodeid (file handle) trying to re-open it. Gluster is returning -ESTALE. The ESTALE propagates back to namei.c:filename_lookup() where lookup is re-attempted with LOOKUP_REVAL. The right behavior now, would be for FUSE to ignore the entry-timeout and and do the up-call revalidation. Instead FUSE is ignoring LOOKUP_REVAL, succeeding the revalidation (because entry-timeout has not passed), and open() is again retried on the old file handle and finally the ESTALE is going back to the application. Fix: if revalidation is happening with LOOKUP_REVAL, then ignore entry-timeout and always do the up-call. Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: stable@vger.kernel.org
2014-07-07fuse: timeout comparison fixMiklos Szeredi
As suggested by checkpatch.pl, use time_before64() instead of direct comparison of jiffies64 values. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: <stable@vger.kernel.org>
2014-07-07ALSA: hda: Fix build warningThierry Reding
The hda_tegra_disable_clocks() function is only used by the suspend and resume code, so it needs to be included in the #ifdef CONFIG_PM_SLEEP block to prevent the following warning: CC sound/pci/hda/hda_tegra.o sound/pci/hda/hda_tegra.c:238:13: warning: 'hda_tegra_disable_clocks' defined but not used [-Wunused-function] static void hda_tegra_disable_clocks(struct hda_tegra *data) ^ Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-07-07hwmon: (adm1031) Fix writes to limit registersGuenter Roeck
Upper limit for write operations to temperature limit registers was clamped to a fractional value. However, limit registers do not support fractional values. As a result, upper limits of 127.5 degrees C or higher resulted in a rounded limit of 128 degrees C. Since limit registers are signed, this was stored as -128 degrees C. Clamp limits to (-55, +127) degrees C to solve the problem. Value on writes to auto_temp[12]_min and auto_temp[12]_max were not clamped at all, but masked. As a result, out-of-range writes resulted in a more or less arbitrary limit. Clamp those attributes to (0, 127) degrees C for more predictable results. Cc: Axel Lin <axel.lin@ingics.com> Cc: stable@vger.kernel.org Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-07-07Merge branch 'for-v3.16-rc/clk-dt-fixes' of ↵Tony Lindgren
https://github.com/t-kristo/linux-pm into fixes-rc4
2014-07-07ARM: dts: Fix TI CPSW Phy mode selection on IGEP COM AQUILA.Enric Balletbo i Serra
As this board use external clock for RMII interface we should specify 'rmii' phy mode and 'rmii-clock-ext' to make ethernet working. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-07-07ARM: dts: am335x-evmsk: Enable the McASP FIFO for audioPeter Ujfalusi
The use of FIFO in McASP can reduce the risk of audio under/overrun and lowers the load on the memories since the DMA will operate in bursts. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-07-07ARM: dts: am335x-evm: Enable the McASP FIFO for audioPeter Ujfalusi
The use of FIFO in McASP can reduce the risk of audio under/overrun and lowers the load on the memories since the DMA will operate in bursts. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-07-07ARM: OMAP2+: Make GPMC skip disabled devicesGuido Martínez
Currently, child nodes of the gpmc node are iterated and probed regardless of their 'status' property. This means adding 'status = "disabled";' has no effect. This patch changes the iteration to only probe nodes marked as available. Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar> Tested-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-07-07ARM: OMAP2+: create dsp device only on OMAP3 SoCsSuman Anna
The DSP platform device for TI DSP/Bridge is currently created unconditionally whenever CONFIG_TIDSPBRIDGE is enabled. This device should only be created on OMAP34xx/ OMAP36xx SoCs, and not for other OMAP3 derived SoCs or when booting multi-arch images on other SoCs. So, add a check for the SoC family both before creating the device and allocating the carveout memory for the device. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-24 05:23:11 +0000