summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-01-20Merge branches 'pci/iommu' and 'pci/misc' into nextBjorn Helgaas
* pci/iommu: PCI: Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183 * pci/misc: PCI: Limit config space size for Netronome NFP4000 PCI: Add Netronome NFP4000 PF device ID
2016-01-20PCI: Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183Tim Sander
Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183. Signed-off-by: Tim Sander <tim@krieglstein.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Alex Williamson <alex.williamson@redhat.com>
2016-01-20Merge branch 'kbuild' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild updates from Michal Marek: - Make <modname>-m in makefiles work like <modname>-y and fix the fallout - Minor genksyms fix - Fix race with make -j install modules_install - Move -Wsign-compare from make W=1 to W=2 - Other minor fixes * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kbuild: Demote 'sign-compare' warning to W=2 Makefile: revert "Makefile: Document ability to make file.lst and file.S" partially kbuild: Do not run modules_install and install in paralel genksyms: Handle string literals with spaces in reference files fixdep: constify strrcmp arguments ath10k: Fix build with CONFIG_THERMAL=m Revert "drm: Hack around CONFIG_AGP=m build failures" kbuild: Allow to specify composite modules with modname-m staging/ad7606: Actually build the interface modules
2016-01-20FRV: Mark architecture orphanedDavid Howells
Mark the FRV architecture orphaned in the MAINTAINERS file. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-20MAINTAINERS: Update mailing list for Renesas SoC DevelopmentSimon Horman
Update the mailing list used for development of support for Renesas SoCs and related drivers. Up until now the linux-sh mailing list has been used, however, Renesas SoCs are now much wider than the SH architecture and there is some desire from some for the linux-sh list to refocus on discussion of the work on the SH architecture. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rich Felker <dalias@libc.org> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-20mm: avoid uninitialized variable in tracepointArnd Bergmann
A newly added tracepoint in the hugepage code uses a variable in the error handling that is not initialized at that point: include/trace/events/huge_memory.h:81:230: error: 'isolated' may be used uninitialized in this function [-Werror=maybe-uninitialized] The result is relatively harmless, as the trace data will in rare cases contain incorrect data. This works around the problem by adding an explicit initialization. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 7d2eba0557c1 ("mm: add tracepoint for scanning pages") Reviewed-by: Ebru Akagunduz <ebru.akagunduz@gmail.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-20ALSA: hda - Flush the pending probe work at removeTakashi Iwai
As HD-audio driver does deferred probe internally via workqueue, the driver might go into the mixed state doing both probe and remove when the module gets unloaded during the probe work. This eventually triggers an Oops, unsurprisingly. For avoiding this race, we just need to flush the pending probe work explicitly before actually starting the resource release. Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=960710 Cc: <stable@vger.kernel.org> # v3.17+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-01-20btrfs: raid56: Use raid_write_end_io for scrubZhao Lei
No need to create additional end_io function for scrub, it increased code size and introduced some un-unified lines, as: raid_write_parity_end_io(): int err = bio->bi_error; if (bio->bi_error) raid_write_end_io(): int err = bio->bi_error; if (err) This patch combines them. Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-01-20btrfs: Remove unnecessary ClearPageUptodate for raid56Zhao Lei
PageUptodate flag already initialized to 0 for new page, no need to set it again. Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-01-20btrfs: use rbio->nr_pages to reduce calculationZhao Lei
We can use rbio->stripe_npages to reduce unnecessary calculation in many code place. Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-01-20btrfs: Use unified stripe_page's index calculationZhao Lei
We are using different index calculation method for stripe_page in current code: 1: (rbio->stripe_len / PAGE_CACHE_SIZE) * stripe_index + page_index 2: DIV_ROUND_UP(rbio->stripe_len, PAGE_CACHE_SIZE) * stripe_index + page_index 3: DIV_ROUND_UP(rbio->stripe_len * stripe_index, PAGE_CACHE_SIZE) + page_index ... They can get same result when stripe_len align to PAGE_CACHE_SIZE, this is why current code can work, intruduce and use a common function for calculation is a better choose. Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-01-20btrfs: Fix calculation of rbio->dbitmap's size calculationZhao Lei
Current code is trying to calculate rbio->dbitmap's size to make it align to sizeof(long), but implement haven't achived this object, it is align to sizeof(char) instead. This patch fixed above calculation, and use sizeof(long) instead of fixed "8" to increate compatibility. Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-01-20btrfs: Fix no_space in write and rm loopZhao Lei
I see no_space in v4.4-rc1 again in xfstests generic/102. It happened randomly in some node only. (one of 4 phy-node, and a kvm with non-virtio block driver) By bisect, we can found the first-bad is: commit bdced438acd8 ("block: setup bi_phys_segments after splitting")' But above patch only triggered the bug by making bio operation faster(or slower). Main reason is in our space_allocating code, we need to commit page writeback before wait it complish, this patch fixed above bug. BTW, there is another reason for generic/102 fail, caused by disable default mixed-blockgroup, I'll fix it in xfstests. Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-01-20btrfs: merge functions for wait snapshot creationZhao Lei
wait_for_snapshot_creation() is in same group with oher two: btrfs_start_write_no_snapshoting() btrfs_end_write_no_snapshoting() Rename wait_for_snapshot_creation() and move it into same place with other two. Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-01-20btrfs: delete unused argument in btrfs_copy_from_userZhao Lei
size_t write_bytes is not necessary for btrfs_copy_from_user(), delete it. Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-01-20ALSA: hda - Fix missing module loading with model=generic optionTakashi Iwai
When the generic codec driver is specified via model option or such, the hda driver doesn't try to load the generic driver module but still loads the codec-specific driver, and this ends up with the binding failure. This patch fixes it by moving the generic module request in the common helper code. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111021 Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-01-20h8300: System call entry enable interrupt.Yoshinori Sato
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
2016-01-20h8300: show_stack cleanupYoshinori Sato
- fix stack limit. h8300's stack not aligned 4byte. - pritty output form. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
2016-01-20h8300: Restraint of warning.Yoshinori Sato
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
2016-01-20h8300: Add KGDB support.Yoshinori Sato
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
2016-01-20ALSA: hda - Degrade i915 binding failure messageTakashi Iwai
Currently HD-audio driver on Intel Skylake or Broxteon gives an error message when binding with i915 audio component fails. However, this isn't any serious error on a system without Intel graphics. Indeed there are such systems, where a third-party codec (e.g. Creative) is put on the mobo while using other discrete GPU (e.g. Nvidia). Printing a kernel "error" message is overreaction in such a case. This patch downgrades the print level for that message. For systems that mandate the i915 binding (e.g. Haswell or Broadwell HDMI/DP), another kernel error message is shown in addition to make clear what went wrong. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111021 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-01-20irqchip: renesas-h8s: Replace ctrl_outw/ctrl_inw with writew/readwGuenter Roeck
Commit 13ae42a3b1c1 ("h8300: Rename ctlr_out/in[bwl] to raw_read/write[bwl]") changed the function names, but not all callers, resulting in drivers/irqchip/irq-renesas-h8s.c: In function ‘h8s_disable_irq’: drivers/irqchip/irq-renesas-h8s.c:43:9: error: implicit declaration of function ‘ctrl_inw’ drivers/irqchip/irq-renesas-h8s.c:44:2: error: implicit declaration of function ‘ctrl_outw’ Fixes: 13ae42a3b1c1 ("h8300: Rename ctlr_out/in[bwl] to raw_read/write[bwl]") Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-01-20h8300: signal stack fixYoshinori Sato
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
2016-01-20h8300: Add LZO compressionYoshinori Sato
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
2016-01-20h8300: zImage alignment fixYoshinori Sato
Missing alignment for .data section. Sometime bootup failed. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
2016-01-20clk: h8300: Remove "sh73a0-" part from compatible valueGeert Uytterhoeven
Drop the bogus "sh73a0-" part (accidentally copied from shmobile?) from the compatible value. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-01-20h8300: zImage alignment fixYoshinori Sato
Missing alignment for .data section. Sometime bootup failed. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
2016-01-20crypto: algif_skcipher - sendmsg SG marking is off by oneHerbert Xu
We mark the end of the SG list in sendmsg and sendpage and unmark it on the next send call. Unfortunately the unmarking in sendmsg is off-by-one, leading to an SG list that is too short. Fixes: 0f477b655a52 ("crypto: algif - Mark sgl end at the end of data") Cc: stable@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-01-20netfilter: nf_conntrack: use safer way to lock all bucketsSasha Levin
When we need to lock all buckets in the connection hashtable we'd attempt to lock 1024 spinlocks, which is way more preemption levels than supported by the kernel. Furthermore, this behavior was hidden by checking if lockdep is enabled, and if it was - use only 8 buckets(!). Fix this by using a global lock and synchronize all buckets on it when we need to lock them all. This is pretty heavyweight, but is only done when we need to resize the hashtable, and that doesn't happen often enough (or at all). Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-01-20mmc: sdio_cis: fix unknown tuple for CISTPL_SDIO_STDShawn Lin
CISTPL_SDIO_STD(0x91) is a known tuple, but sdio_cis don't define it, so we get the warning below while probing several sdio wifi cards. Refer to SDIO spec, it's not needed to parse the tuple, so this patch make it a known one. [ 4.098980] mmc2: queuing unknown CIS tuple 0x91 (3 bytes) [ 4.099033] mmc2: new ultra high speed SDR104 SDIO card at address 0001 Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-01-20scsi: qla2xxxx: avoid type mismatch in comparisonArnd Bergmann
A recent bug fix added code that does bool logged_out = (status & 0xFFFF); if (logged_out == CTIO_PORT_LOGGED_OUT) ... This looks wrong because we are comparing a boolean with an integer constant, ang gcc warns about it accordingly: drivers/scsi/qla2xxx/qla_target.c: In function 'qlt_do_ctio_completion': drivers/scsi/qla2xxx/qla_target.c:3587:20: warning: comparison of constant '41' with boolean expression is always false [-Wbool-compare] (logged_out == CTIO_PORT_LOGGED_OUT) ? The correct fix is presumably to make that variable an 'int'. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 71cdc0796465 ("qla2xxx: Delete session if initiator is gone from FW") Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-20target/user: Make sure netlink would reach all network namespacesSheng Yang
The current code only allow netlink to reach the initial network namespace, which caused trouble for any client running inside container. This patch would make sure TCMU netlink would work for all network namespaces. Signed-off-by: Sheng Yang <sheng@yasker.org> Acked-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-20target: Obtain se_node_acl->acl_kref during get_initiator_node_aclNicholas Bellinger
This patch addresses a long standing race where obtaining se_node_acl->acl_kref in __transport_register_session() happens a bit too late, and leaves open the potential for core_tpg_del_initiator_node_acl() to hit a NULL pointer dereference. Instead, take ->acl_kref in core_tpg_get_initiator_node_acl() while se_portal_group->acl_node_mutex is held, and move the final target_put_nacl() from transport_deregister_session() into transport_free_session() so that fabric driver login failure handling using the modern method to still work as expected. Also, update core_tpg_get_initiator_node_acl() to take an extra reference for dynamically generated acls for demo-mode, before returning to fabric caller. Also update iscsi-target sendtargets special case handling to use target_tpg_has_node_acl() when checking if demo_mode_discovery == true during discovery lookup. Note the existing wait_for_completion(&acl->acl_free_comp) in core_tpg_del_initiator_node_acl() does not change. Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Andy Grover <agrover@redhat.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-20target: Convert ACL change queue_depth se_session reference usageNicholas Bellinger
This patch converts core_tpg_set_initiator_node_queue_depth() to use struct se_node_acl->acl_sess_list when performing explicit se_tpg_tfo->shutdown_session() for active sessions, in order for new se_node_acl->queue_depth to take effect. This follows how core_tpg_del_initiator_node_acl() currently works when invoking se_tpg_tfo->shutdown-session(), and ahead of the next patch to take se_node_acl->acl_kref during lookup, the extra get_initiator_node_acl() can go away. In order to achieve this, go ahead and change target_get_session() to use kref_get_unless_zero() and propigate up the return value to know when a session is already being released. This is because se_node_acl->acl_group is already protecting se_node_acl->acl_group reference via configfs, and shutdown within core_tpg_del_initiator_node_acl() won't occur until sys_write() to core_tpg_set_initiator_node_queue_depth() attribute returns back to user-space. Also, drop the left-over iscsi-target hack, and obtain se_portal_group->session_lock in lio_tpg_shutdown_session() internally. Remove iscsi-target wrapper and unused se_tpg + force parameters and associated code. Reported-by: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Andy Grover <agrover@redhat.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-20iscsi-target: Fix potential dead-lock during node acl deleteNicholas Bellinger
This patch is a iscsi-target specific bug-fix for a dead-lock that can occur during explicit struct se_node_acl->acl_group se_session deletion via configfs rmdir(2), when iscsi-target time2retain timer is still active. It changes iscsi-target to obtain se_portal_group->session_lock internally using spin_in_locked() to check for the specific se_node_acl configfs shutdown rmdir(2) case. Note this patch is intended for stable, and the subsequent v4.5-rc patch converts target_core_tpg.c to use proper se_sess->sess_kref reference counting for both se_node_acl deletion + se_node_acl->queue_depth se_session restart. Reported-by:: Sagi Grimberg <sagig@mellanox.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Andy Grover <agrover@redhat.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-20ALSA: at73c213: manage SSC clockMans Rullgard
Since commit 49af54ff0fc7 ("misc: atmel-ssc: prepare clock only when request") the SSC driver expects clients to manage the SSC clock. This updates the at73c213 driver to enable the SSC clock whenever it is needed. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-01-19btrfs: Use direct way to determine raid56 write/recover modeZhao Lei
Old code used bbio->raid_map to determine whether in raid56 write/recover operation, because we didn't't have bbio->map_type. Now we have direct way for this condition, rid of using the function-relative data, and make the code more readable. Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-01-19btrfs: Small cleanup for get index_srcdev loopZhao Lei
1: Adjust condition in loop to make less TAB 2: Move btrfs_put_bbio()'s line for combine, and makes logic clean. Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-01-19btrfs: Enhance chunk validation checkQu Wenruo
Enhance chunk validation: 1) Num_stripes We already have such check but it's only in super block sys chunk array. Now check all on-disk chunks. 2) Chunk logical It should be aligned to sector size. This behavior should be *DOUBLE CHECKED* for 64K sector size like PPC64 or AArch64. Maybe we can found some hidden bugs. 3) Chunk length Same as chunk logical, should be aligned to sector size. 4) Stripe length It should be power of 2. 5) Chunk type Any bit out of TYPE_MAS | PROFILE_MASK is invalid. With all these much restrict rules, several fuzzed image reported in mail list should no longer cause kernel panic. Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-01-19btrfs: Enhance super validation checkQu Wenruo
Enhance btrfs_check_super_valid() function by the following points: 1) Restrict sector/node size check Not the old max/min valid check, but also check if it's a power of 2. So some bogus number like 12K node size won't pass now. 2) Super flag check For now, there is still some inconsistency between kernel and btrfs-progs super flags. And considering btrfs-progs may add new flags for super block, this check will only output warning. 3) Better root alignment check Now root bytenr is checked against sector size. 4) Move some check into btrfs_check_super_valid(). Like node size vs leaf size check, and PAGESIZE vs sectorsize check. And magic number check. Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-01-19Btrfs: fix deadlock running delayed iputs at transaction commit timeFilipe Manana
While running a stress test I ran into a deadlock when running the delayed iputs at transaction time, which produced the following report and trace: [ 886.399989] ============================================= [ 886.400871] [ INFO: possible recursive locking detected ] [ 886.401663] 4.4.0-rc6-btrfs-next-18+ #1 Not tainted [ 886.402384] --------------------------------------------- [ 886.403182] fio/8277 is trying to acquire lock: [ 886.403568] (&fs_info->delayed_iput_sem){++++..}, at: [<ffffffffa0538823>] btrfs_run_delayed_iputs+0x36/0xbf [btrfs] [ 886.403568] [ 886.403568] but task is already holding lock: [ 886.403568] (&fs_info->delayed_iput_sem){++++..}, at: [<ffffffffa0538823>] btrfs_run_delayed_iputs+0x36/0xbf [btrfs] [ 886.403568] [ 886.403568] other info that might help us debug this: [ 886.403568] Possible unsafe locking scenario: [ 886.403568] [ 886.403568] CPU0 [ 886.403568] ---- [ 886.403568] lock(&fs_info->delayed_iput_sem); [ 886.403568] lock(&fs_info->delayed_iput_sem); [ 886.403568] [ 886.403568] *** DEADLOCK *** [ 886.403568] [ 886.403568] May be due to missing lock nesting notation [ 886.403568] [ 886.403568] 3 locks held by fio/8277: [ 886.403568] #0: (sb_writers#11){.+.+.+}, at: [<ffffffff81174c4c>] __sb_start_write+0x5f/0xb0 [ 886.403568] #1: (&sb->s_type->i_mutex_key#15){+.+.+.}, at: [<ffffffffa054620d>] btrfs_file_write_iter+0x73/0x408 [btrfs] [ 886.403568] #2: (&fs_info->delayed_iput_sem){++++..}, at: [<ffffffffa0538823>] btrfs_run_delayed_iputs+0x36/0xbf [btrfs] [ 886.403568] [ 886.403568] stack backtrace: [ 886.403568] CPU: 6 PID: 8277 Comm: fio Not tainted 4.4.0-rc6-btrfs-next-18+ #1 [ 886.403568] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014 [ 886.403568] 0000000000000000 ffff88009f80f770 ffffffff8125d4fd ffffffff82af1fc0 [ 886.403568] ffff88009f80f830 ffffffff8108e5f9 0000000200000000 ffff88009fd92290 [ 886.403568] 0000000000000000 ffffffff82af1fc0 ffffffff829cfb01 00042b216d008804 [ 886.403568] Call Trace: [ 886.403568] [<ffffffff8125d4fd>] dump_stack+0x4e/0x79 [ 886.403568] [<ffffffff8108e5f9>] __lock_acquire+0xd42/0xf0b [ 886.403568] [<ffffffff810c22db>] ? __module_address+0xdf/0x108 [ 886.403568] [<ffffffff8108eb77>] lock_acquire+0x10d/0x194 [ 886.403568] [<ffffffff8108eb77>] ? lock_acquire+0x10d/0x194 [ 886.403568] [<ffffffffa0538823>] ? btrfs_run_delayed_iputs+0x36/0xbf [btrfs] [ 886.489542] [<ffffffff8148556b>] down_read+0x3e/0x4d [ 886.489542] [<ffffffffa0538823>] ? btrfs_run_delayed_iputs+0x36/0xbf [btrfs] [ 886.489542] [<ffffffffa0538823>] btrfs_run_delayed_iputs+0x36/0xbf [btrfs] [ 886.489542] [<ffffffffa0533953>] btrfs_commit_transaction+0x8f5/0x96e [btrfs] [ 886.489542] [<ffffffffa0521d7a>] flush_space+0x435/0x44a [btrfs] [ 886.489542] [<ffffffffa052218b>] ? reserve_metadata_bytes+0x26a/0x384 [btrfs] [ 886.489542] [<ffffffffa05221ae>] reserve_metadata_bytes+0x28d/0x384 [btrfs] [ 886.489542] [<ffffffffa052256c>] ? btrfs_block_rsv_refill+0x58/0x96 [btrfs] [ 886.489542] [<ffffffffa0522584>] btrfs_block_rsv_refill+0x70/0x96 [btrfs] [ 886.489542] [<ffffffffa053d747>] btrfs_evict_inode+0x394/0x55a [btrfs] [ 886.489542] [<ffffffff81188e31>] evict+0xa7/0x15c [ 886.489542] [<ffffffff81189878>] iput+0x1d3/0x266 [ 886.489542] [<ffffffffa053887c>] btrfs_run_delayed_iputs+0x8f/0xbf [btrfs] [ 886.489542] [<ffffffffa0533953>] btrfs_commit_transaction+0x8f5/0x96e [btrfs] [ 886.489542] [<ffffffff81085096>] ? signal_pending_state+0x31/0x31 [ 886.489542] [<ffffffffa0521191>] btrfs_alloc_data_chunk_ondemand+0x1d7/0x288 [btrfs] [ 886.489542] [<ffffffffa0521282>] btrfs_check_data_free_space+0x40/0x59 [btrfs] [ 886.489542] [<ffffffffa05228f5>] btrfs_delalloc_reserve_space+0x1e/0x4e [btrfs] [ 886.489542] [<ffffffffa053620a>] btrfs_direct_IO+0x10c/0x27e [btrfs] [ 886.489542] [<ffffffff8111d9a1>] generic_file_direct_write+0xb3/0x128 [ 886.489542] [<ffffffffa05463c3>] btrfs_file_write_iter+0x229/0x408 [btrfs] [ 886.489542] [<ffffffff8108ae38>] ? __lock_is_held+0x38/0x50 [ 886.489542] [<ffffffff8117279e>] __vfs_write+0x7c/0xa5 [ 886.489542] [<ffffffff81172cda>] vfs_write+0xa0/0xe4 [ 886.489542] [<ffffffff811734cc>] SyS_write+0x50/0x7e [ 886.489542] [<ffffffff814872d7>] entry_SYSCALL_64_fastpath+0x12/0x6f [ 1081.852335] INFO: task fio:8244 blocked for more than 120 seconds. [ 1081.854348] Not tainted 4.4.0-rc6-btrfs-next-18+ #1 [ 1081.857560] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1081.863227] fio D ffff880213f9bb28 0 8244 8240 0x00000000 [ 1081.868719] ffff880213f9bb28 00ffffff810fc6b0 ffffffff0000000a ffff88023ed55240 [ 1081.872499] ffff880206b5d400 ffff880213f9c000 ffff88020a4d5318 ffff880206b5d400 [ 1081.876834] ffffffff00000001 ffff880206b5d400 ffff880213f9bb40 ffffffff81482ba4 [ 1081.880782] Call Trace: [ 1081.881793] [<ffffffff81482ba4>] schedule+0x7f/0x97 [ 1081.883340] [<ffffffff81485eb5>] rwsem_down_write_failed+0x2d5/0x325 [ 1081.895525] [<ffffffff8108d48d>] ? trace_hardirqs_on_caller+0x16/0x1ab [ 1081.897419] [<ffffffff81269723>] call_rwsem_down_write_failed+0x13/0x20 [ 1081.899251] [<ffffffff81269723>] ? call_rwsem_down_write_failed+0x13/0x20 [ 1081.901063] [<ffffffff81089fae>] ? __down_write_nested.isra.0+0x1f/0x21 [ 1081.902365] [<ffffffff814855bd>] down_write+0x43/0x57 [ 1081.903846] [<ffffffffa05211b0>] ? btrfs_alloc_data_chunk_ondemand+0x1f6/0x288 [btrfs] [ 1081.906078] [<ffffffffa05211b0>] btrfs_alloc_data_chunk_ondemand+0x1f6/0x288 [btrfs] [ 1081.908846] [<ffffffff8108d461>] ? mark_held_locks+0x56/0x6c [ 1081.910409] [<ffffffffa0521282>] btrfs_check_data_free_space+0x40/0x59 [btrfs] [ 1081.912482] [<ffffffffa05228f5>] btrfs_delalloc_reserve_space+0x1e/0x4e [btrfs] [ 1081.914597] [<ffffffffa053620a>] btrfs_direct_IO+0x10c/0x27e [btrfs] [ 1081.919037] [<ffffffff8111d9a1>] generic_file_direct_write+0xb3/0x128 [ 1081.920754] [<ffffffffa05463c3>] btrfs_file_write_iter+0x229/0x408 [btrfs] [ 1081.922496] [<ffffffff8108ae38>] ? __lock_is_held+0x38/0x50 [ 1081.923922] [<ffffffff8117279e>] __vfs_write+0x7c/0xa5 [ 1081.925275] [<ffffffff81172cda>] vfs_write+0xa0/0xe4 [ 1081.926584] [<ffffffff811734cc>] SyS_write+0x50/0x7e [ 1081.927968] [<ffffffff814872d7>] entry_SYSCALL_64_fastpath+0x12/0x6f [ 1081.985293] INFO: lockdep is turned off. [ 1081.986132] INFO: task fio:8249 blocked for more than 120 seconds. [ 1081.987434] Not tainted 4.4.0-rc6-btrfs-next-18+ #1 [ 1081.988534] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1081.990147] fio D ffff880218febbb8 0 8249 8240 0x00000000 [ 1081.991626] ffff880218febbb8 00ffffff81486b8e ffff88020000000b ffff88023ed75240 [ 1081.993258] ffff8802120a9a00 ffff880218fec000 ffff88020a4d5318 ffff8802120a9a00 [ 1081.994850] ffffffff00000001 ffff8802120a9a00 ffff880218febbd0 ffffffff81482ba4 [ 1081.996485] Call Trace: [ 1081.997037] [<ffffffff81482ba4>] schedule+0x7f/0x97 [ 1081.998017] [<ffffffff81485eb5>] rwsem_down_write_failed+0x2d5/0x325 [ 1081.999241] [<ffffffff810852a5>] ? finish_wait+0x6d/0x76 [ 1082.000306] [<ffffffff81269723>] call_rwsem_down_write_failed+0x13/0x20 [ 1082.001533] [<ffffffff81269723>] ? call_rwsem_down_write_failed+0x13/0x20 [ 1082.002776] [<ffffffff81089fae>] ? __down_write_nested.isra.0+0x1f/0x21 [ 1082.003995] [<ffffffff814855bd>] down_write+0x43/0x57 [ 1082.005000] [<ffffffffa05211b0>] ? btrfs_alloc_data_chunk_ondemand+0x1f6/0x288 [btrfs] [ 1082.007403] [<ffffffffa05211b0>] btrfs_alloc_data_chunk_ondemand+0x1f6/0x288 [btrfs] [ 1082.008988] [<ffffffffa0545064>] btrfs_fallocate+0x7c1/0xc2f [btrfs] [ 1082.010193] [<ffffffff8108a1ba>] ? percpu_down_read+0x4e/0x77 [ 1082.011280] [<ffffffff81174c4c>] ? __sb_start_write+0x5f/0xb0 [ 1082.012265] [<ffffffff81174c4c>] ? __sb_start_write+0x5f/0xb0 [ 1082.013021] [<ffffffff811712e4>] vfs_fallocate+0x170/0x1ff [ 1082.013738] [<ffffffff81181ebb>] ioctl_preallocate+0x89/0x9b [ 1082.014778] [<ffffffff811822d7>] do_vfs_ioctl+0x40a/0x4ea [ 1082.015778] [<ffffffff81176ea7>] ? SYSC_newfstat+0x25/0x2e [ 1082.016806] [<ffffffff8118b4de>] ? __fget_light+0x4d/0x71 [ 1082.017789] [<ffffffff8118240e>] SyS_ioctl+0x57/0x79 [ 1082.018706] [<ffffffff814872d7>] entry_SYSCALL_64_fastpath+0x12/0x6f This happens because we can recursively acquire the semaphore fs_info->delayed_iput_sem when attempting to allocate space to satisfy a file write request as shown in the first trace above - when committing a transaction we acquire (down_read) the semaphore before running the delayed iputs, and when running a delayed iput() we can end up calling an inode's eviction handler, which in turn commits another transaction and attempts to acquire (down_read) again the semaphore to run more delayed iput operations. This results in a deadlock because if a task acquires multiple times a semaphore it should invoke down_read_nested() with a different lockdep class for each level of recursion. Fix this by simplifying the implementation and use a mutex instead that is acquired by the cleaner kthread before it runs the delayed iputs instead of always acquiring a semaphore before delayed references are run from anywhere. Fixes: d7c151717a1e (btrfs: Fix NO_SPACE bug caused by delayed-iput) Cc: stable@vger.kernel.org # 4.1+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-01-19Btrfs: fix typo in log message when starting a balanceFilipe Manana
The recent change titled "Btrfs: Check metadata redundancy on balance" (already in linux-next) left a typo in a message for users: metatdata -> metadata. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-01-19Merge branch 'misc-for-4.5' of ↵Chris Mason
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.5
2016-01-19Merge branch 'misc-cleanups-4.5' of ↵Chris Mason
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.5
2016-01-19Merge tag 'platform-drivers-x86-v4.5-1' of ↵Linus Torvalds
git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull x86 platform driver updates from Darren Hart: "Add intel punit and telemetry driver for APL SoCs. Add intel-hid driver for various laptop hotkey support. Add asus-wireless radio control driver. Keyboard backlight support/improvements for ThinkPads, Vaio, and Toshiba. Several hotkey related fixes and improvements for dell and toshiba. Fix oops on dual GPU Macs in apple-gmux. A few new device IDs and quirks. Various minor config related build issues and cleanups. surface pro 4: - fix compare_const_fl.cocci warnings - Add support for Surface Pro 4 Buttons platform/x86: - Add Intel Telemetry Debugfs interfaces - Add Intel telemetry platform device - Add Intel telemetry platform driver - Add Intel Telemetry Core Driver - add NULL check for input parameters - add Intel P-Unit mailbox IPC driver - update acpi resource structure for Punit thinkpad_acpi: - Add support for keyboard backlight dell-wmi: - Process only one event on devices with interface version 0 - Check if Dell WMI descriptor structure is valid - Improve unknown hotkey handling - Use a C99-style array for bios_to_linux_keycode tc1100-wmi: - fix build warning when CONFIG_PM not enabled asus-wireless: - Add ACPI HID ATK4001 - Add Asus Wireless Radio Control driver asus-wmi: - drop to_platform_driver macro intel-hid: - new hid event driver for hotkeys sony-laptop: - Keyboard backlight control for some Vaio Fit models ideapad-laptop: - Add Lenovo ideapad Y700-17ISK to no_hw_rfkill dmi list apple-gmux: - Assign apple_gmux_data before registering toshiba_acpi: - Add rfkill dependency to ACPI_TOSHIBA entry - Fix keyboard backlight sysfs entries not being updated - Add WWAN RFKill support - Add support for WWAN devices - Fix blank screen at boot if transflective backlight is supported - Propagate the hotkey value via genetlink toshiba_bluetooth: - Add missing newline in toshiba_bluetooth_present function" * tag 'platform-drivers-x86-v4.5-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (29 commits) surface pro 4: fix compare_const_fl.cocci warnings surface pro 4: Add support for Surface Pro 4 Buttons platform:x86: Add Intel Telemetry Debugfs interfaces platform:x86: Add Intel telemetry platform device platform:x86: Add Intel telemetry platform driver platform/x86: Add Intel Telemetry Core Driver intel_punit_ipc: add NULL check for input parameters thinkpad_acpi: Add support for keyboard backlight dell-wmi: Process only one event on devices with interface version 0 dell-wmi: Check if Dell WMI descriptor structure is valid tc1100-wmi: fix build warning when CONFIG_PM not enabled asus-wireless: Add ACPI HID ATK4001 platform/x86: Add Asus Wireless Radio Control driver asus-wmi: drop to_platform_driver macro intel-hid: new hid event driver for hotkeys Keyboard backlight control for some Vaio Fit models platform/x86: Add rfkill dependency to ACPI_TOSHIBA entry platform:x86: add Intel P-Unit mailbox IPC driver intel_pmc_ipc: update acpi resource structure for Punit ideapad-laptop: Add Lenovo ideapad Y700-17ISK to no_hw_rfkill dmi list ...
2016-01-19surface pro 4: fix compare_const_fl.cocci warningsJulia Lawall
Move constants to the right of binary operators. Generated by: scripts/coccinelle/misc/compare_const_fl.cocci CC: Weng Xuetian <wengxt@gmail.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-01-19surface pro 4: Add support for Surface Pro 4 ButtonsWeng Xuetian
Surface Pro 4 buttons are managed by a device with _HID "MSHW0040" different from Surface Pro 3. This commit adds MSHW0040 to id list to support the Surface Pro 4. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=109871 Signed-off-by: Weng Xuetian <wengxt@gmail.com> Acked-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-01-19platform:x86: Add Intel Telemetry Debugfs interfacesSouvik Kumar Chakravarty
This implements debugfs interfaces for reading the telemetry samples from SSRAM and configuring firmware trace verbosity. Interface created under /sys/kernel/debug/telemetry soc_states: SoC Device and Low Power States pss_info: Info from the Primary SubSystem ioss_info: Info from IO SubSusytem pss_trace_verbosity: Read/Modify PSS F/W trace verbosity ioss_trace_verbosity: Read/Modify IOSS F/W trace verbosity. Signed-off-by: Souvik Kumar Chakravarty <souvik.k.chakravarty@intel.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-01-19platform:x86: Add Intel telemetry platform deviceSouvik Kumar Chakravarty
Telemetry Device is created by the pmc_ipc driver. Resources are populated according SSRAM region as indicated by the BIOS tables. Signed-off-by: Souvik Kumar Chakravarty <souvik.k.chakravarty@intel.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-01-19platform:x86: Add Intel telemetry platform driverSouvik Kumar Chakravarty
Telemetry platform driver implements the telemetry interfaces. Currently it supports ApolloLake. It uses the PUNIT and PMC IPC interfaces to configure the telemetry samples to read. The samples are read from a Secure SRAM region. Signed-off-by: Souvik Kumar Chakravarty <souvik.k.chakravarty@intel.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-20 18:44:57 +0000