summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-01-19IB/mlx4: Enable send of RoCE QP1 packets with IP/UDP headersMoni Shoua
RoCEv2 packets are sent over IP/UDP protocols. The mlx4 driver uses a type of RAW QP to send packets for QP1 and therefore needs to build the network headers below BTH in software. This patch adds option to build QP1 packets with IP and UDP headers if RoCEv2 is requested. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx4: Enable RoCE v2 when the IB device is addedMoni Shoua
If the hardware supports RoCE v2, we configure the hardware UDP port according to the RoCE v2 Annex when mlx4_ib device is added. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx4: Support modify_qp for RoCE v2Moni Shoua
In order to support modify_qp for RoCE v2, we need to set the gid_type in the QP context. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/core: Add definition for the standard RoCE V2 UDP portMoni Shoua
This will be used in hardware device driver when building QP or AH contexts. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19net/mlx4_core: Add support for RoCE v2 entropyMoni Shoua
In RoCE v2 we need to choose a source UDP port, we do so by using entropy over the source and dest QPNs. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19net/mlx4_core: Add support for configuring RoCE v2 UDP portMoni Shoua
In order to support RoCE v2, the hardware needs to be configured to classify certain UDP packets as RoCE v2 packets and pass it through its RoCE pipeline. This patch enables configuring this UDP port. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx4: Add support for setting RoCEv2 gids in hardwareMoni Shoua
To tell hardware about a gid with type RoCEv2, software needs a new modifier to the SET_PORT command: MLX4_SET_PORT_ROCE_ADDR. This can replace the old method, MLX4_SET_PORT_GID_TABLE, for RoCEv1 gids. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19net/mlx4_core: Configure mlx4 hardware for mixed RoCE v1/v2 modesMoni Shoua
If the hardware supports RoCE v2 (mixed with RoCE v1) mode, we enable it. This is necessary in order to support RoCE v2. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx4: Add gid_type to GID propertiesMoni Shoua
IB core driver adds a property of type to struct ib_gid_attr. The mlx4 driver should take that in consideration when modifying or querying the hardware gid table. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19net/mlx4: Query RoCE supportMoni Shoua
Query the RoCE support from firmware using the appropriate firmware commands. Downstream patches will read these capabilities and act accordingly. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19svc_rdma: use local_dma_lkeyChristoph Hellwig
We now alwasy have a per-PD local_dma_lkey available. Make use of that fact in svc_rdma and stop registering our own MR. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Acked-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19svcrdma: Add class for RDMA backwards direction transportChuck Lever
To support the server-side of an NFSv4.1 backchannel on RDMA connections, add a transport class that enables backward direction messages on an existing forward channel connection. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Acked-by: Bruce Fields <bfields@fieldses.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19svcrdma: Define maximum number of backchannel requestsChuck Lever
Extra resources for handling backchannel requests have to be pre-allocated when a transport instance is created. Set up additional fields in svcxprt_rdma to track these resources. The max_requests fields are elements of the RPC-over-RDMA protocol, so they should be u32. To ensure that unsigned arithmetic is used everywhere, some other fields in the svcxprt_rdma struct are updated. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Acked-by: Bruce Fields <bfields@fieldses.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19svcrdma: Make map_xdr non-staticChuck Lever
Pre-requisite to use map_xdr in the backchannel code. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Acked-by: Bruce Fields <bfields@fieldses.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19svcrdma: Remove last two __GFP_NOFAIL call sitesChuck Lever
Clean up. These functions can otherwise fail, so check for page allocation failures too. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Acked-by: Bruce Fields <bfields@fieldses.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19svcrdma: Add gfp flags to svc_rdma_post_recv()Chuck Lever
svc_rdma_post_recv() allocates pages for receive buffers on-demand. It uses GFP_KERNEL so the allocator tries hard, and may sleep. But I'm about to add a call to svc_rdma_post_recv() from a function that may not sleep. Since all svc_rdma_post_recv() call sites can tolerate its failure, allow it to fail if the page allocator returns nothing. Longer term, receive buffers, being a finite resource per-connection, should be pre-allocated and re-used. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Acked-by: Bruce Fields <bfields@fieldses.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19svcrdma: Remove unused req_map and ctxt kmem_cachesChuck Lever
Clean up. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Acked-by: Bruce Fields <bfields@fieldses.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19svcrdma: Improve allocation of struct svc_rdma_req_mapChuck Lever
To ensure this allocation cannot fail and will not sleep, pre-allocate the req_map structures per-connection. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Acked-by: Bruce Fields <bfields@fieldses.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19svcrdma: Improve allocation of struct svc_rdma_op_ctxtChuck Lever
When the maximum payload size of NFS READ and WRITE was increased by commit cc9a903d915c ("svcrdma: Change maximum server payload back to RPCSVC_MAXPAYLOAD"), the size of struct svc_rdma_op_ctxt increased to over 6KB (on x86_64). That makes allocating one of these from a kmem_cache more likely to fail in situations when system memory is exhausted. Since I'm about to add a caller where this allocation must always work _and_ it cannot sleep, pre-allocate ctxts for each connection. Another motivation for this change is that NFSv4.x servers are required by specification not to drop NFS requests. Pre-allocating memory resources reduces the likelihood of a drop. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Acked-by: Bruce Fields <bfields@fieldses.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19svcrdma: Clean up process_context()Chuck Lever
Be sure the completed ctxt is put in every path. The xprt enqueue can take a while, so put the completed ctxt back in circulation _before_ enqueuing the xprt. Remove/disable debugging. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Acked-by: Bruce Fields <bfields@fieldses.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19svcrdma: Clean up rdma_create_xprt()Chuck Lever
kzalloc is used here, so setting the atomic fields to zero is unnecessary. sc_ord is set again in handle_connect_req. The other fields are re-initialized in svc_rdma_accept(). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Acked-by: Bruce Fields <bfields@fieldses.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/core: Use hop-limit from IP stack for RoCEMatan Barak
Previously, IPV6_DEFAULT_HOPLIMIT was used as the hop limit value for RoCE. Fixing that by taking ip4_dst_hoplimit and ip6_dst_hoplimit as hop limit values. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/core: Rename rdma_addr_find_dmac_by_grhMatan Barak
rdma_addr_find_dmac_by_grh resolves dmac, vlan_id and if_index and downsteram patch will also add hop_limit as an output parameter, thus we rename it to rdma_addr_find_l2_eth_by_grh. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/cm: Fix a recently introduced deadlockBart Van Assche
ib_send_cm_drep() calls cm_enter_timewait() while holding a spinlock that can be locked from inside an interrupt handler. Hence do not enable interrupts inside cm_enter_timewait() if called with interrupts disabled. This patch fixes e.g. the following deadlock: Acked-by: Erez Shitrit <erezsh@mellanox.com> ================================= [ INFO: inconsistent lock state ] 4.4.0-rc7+ #1 Tainted: G E --------------------------------- inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. swapper/8/0 [HC1[1]:SC0[0]:HE0:SE1] takes: (&(&cm_id_priv->lock)->rlock){?.+...}, at: [<ffffffffa036eec4>] cm_establish+0x 74/0x1b0 [ib_cm] {HARDIRQ-ON-W} state was registered at: [<ffffffff810a3c11>] mark_held_locks+0x71/0x90 [<ffffffff810a3e87>] trace_hardirqs_on_caller+0xa7/0x1c0 [<ffffffff810a3fad>] trace_hardirqs_on+0xd/0x10 [<ffffffff8151c40b>] _raw_spin_unlock_irq+0x2b/0x40 [<ffffffffa036ea8e>] cm_enter_timewait+0xae/0x100 [ib_cm] [<ffffffffa036ff76>] ib_send_cm_drep+0xb6/0x190 [ib_cm] [<ffffffffa052ed08>] srp_cm_handler+0x128/0x1a0 [ib_srp] [<ffffffffa0370340>] cm_process_work+0x20/0xf0 [ib_cm] [<ffffffffa0371335>] cm_dreq_handler+0x135/0x2c0 [ib_cm] [<ffffffffa03733c5>] cm_work_handler+0x75/0xd0 [ib_cm] [<ffffffff8107184d>] process_one_work+0x1bd/0x460 [<ffffffff81073148>] worker_thread+0x118/0x420 [<ffffffff81078454>] kthread+0xe4/0x100 [<ffffffff8151cbbf>] ret_from_fork+0x3f/0x70 irq event stamp: 1672286 hardirqs last enabled at (1672283): [<ffffffff81408ec0>] poll_idle+0x10/0x80 hardirqs last disabled at (1672284): [<ffffffff8151d304>] common_interrupt+0x84/0x89 softirqs last enabled at (1672286): [<ffffffff8105b4dc>] _local_bh_enable+0x1c/0x50 softirqs last disabled at (1672285): [<ffffffff8105b697>] irq_enter+0x47/0x70 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&cm_id_priv->lock)->rlock); <Interrupt> lock(&(&cm_id_priv->lock)->rlock); *** DEADLOCK *** no locks held by swapper/8/0. stack backtrace: CPU: 8 PID: 0 Comm: swapper/8 Tainted: G E 4.4.0-rc7+ #1 Hardware name: Dell Inc. PowerEdge R430/03XKDV, BIOS 1.0.2 11/17/2014 ffff88045af5e950 ffff88046e503a88 ffffffff81251c1b 0000000000000007 0000000000000006 0000000000000003 ffff88045af5ddc0 ffff88046e503ad8 ffffffff810a32f4 0000000000000000 0000000000000000 0000000000000001 Call Trace: <IRQ> [<ffffffff81251c1b>] dump_stack+0x4f/0x74 [<ffffffff810a32f4>] print_usage_bug+0x184/0x190 [<ffffffff810a36e2>] mark_lock_irq+0xf2/0x290 [<ffffffff810a3995>] mark_lock+0x115/0x1b0 [<ffffffff810a3b8c>] mark_irqflags+0x15c/0x170 [<ffffffff810a4fef>] __lock_acquire+0x1ef/0x560 [<ffffffff810a53c2>] lock_acquire+0x62/0x80 [<ffffffff8151bd33>] _raw_spin_lock_irqsave+0x43/0x60 [<ffffffffa036eec4>] cm_establish+0x74/0x1b0 [ib_cm] [<ffffffffa036f031>] ib_cm_notify+0x31/0x100 [ib_cm] [<ffffffffa0637f24>] srpt_qp_event+0x54/0xd0 [ib_srpt] [<ffffffffa0196052>] mlx4_ib_qp_event+0x72/0xc0 [mlx4_ib] [<ffffffffa00775b9>] mlx4_qp_event+0x69/0xd0 [mlx4_core] [<ffffffffa006000e>] mlx4_eq_int+0x51e/0xd50 [mlx4_core] [<ffffffffa006084f>] mlx4_msi_x_interrupt+0xf/0x20 [mlx4_core] [<ffffffff810b67b0>] handle_irq_event_percpu+0x40/0x110 [<ffffffff810b68bf>] handle_irq_event+0x3f/0x70 [<ffffffff810ba7f9>] handle_edge_irq+0x79/0x120 [<ffffffff81007f3d>] handle_irq+0x5d/0x130 [<ffffffff810071fd>] do_IRQ+0x6d/0x130 [<ffffffff8151d309>] common_interrupt+0x89/0x89 <EOI> [<ffffffff8140895f>] cpuidle_enter_state+0xcf/0x200 [<ffffffff81408aa2>] cpuidle_enter+0x12/0x20 [<ffffffff810990d6>] call_cpuidle+0x36/0x60 [<ffffffff81099163>] cpuidle_idle_call+0x63/0x110 [<ffffffff8109930a>] cpu_idle_loop+0xfa/0x130 [<ffffffff8109934e>] cpu_startup_entry+0xe/0x10 [<ffffffff8103c443>] start_secondary+0x83/0x90 Fixes: commit be4b499323bf ("IB/cm: Do not queue work to a device that's going away") Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Erez Shitrit <erezsh@mellanox.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/srpt: Fix the RDMA completion handlersBart Van Assche
Avoid that the following kernel crash is triggered when processing an RDMA completion: BUG: unable to handle kernel paging request at 0000000100000198 IP: [<ffffffff810a4ea2>] __lock_acquire+0xa2/0x560 Call Trace: [<ffffffff810a53c2>] lock_acquire+0x62/0x80 [<ffffffff8151bd33>] _raw_spin_lock_irqsave+0x43/0x60 [<ffffffffa04fd437>] srpt_rdma_read_done+0x57/0x120 [ib_srpt] [<ffffffffa0144dd3>] __ib_process_cq+0x43/0xc0 [ib_core] [<ffffffffa0145115>] ib_cq_poll_work+0x25/0x70 [ib_core] [<ffffffff8107184d>] process_one_work+0x1bd/0x460 [<ffffffff81073148>] worker_thread+0x118/0x420 [<ffffffff81078454>] kthread+0xe4/0x100 [<ffffffff8151cbbf>] ret_from_fork+0x3f/0x70 Fixes: commit 59fae4deaad3 ("IB/srpt: chain RDMA READ/WRITE requests"). Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19irq_poll: Fix irq_poll_sched()Bart Van Assche
The IRQ_POLL_F_SCHED bit is set as long as polling is ongoing. This means that irq_poll_sched() must proceed if this bit has not yet been set. Fixes: commit ea51190c0315 ("irq_poll: fold irq_poll_sched_prep into irq_poll_sched"). Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/core: Fix dereference before checkMatan Barak
Sparse complains about dereference before check. Fixing this by moving the check before the dereference. Fixes: 200298326b27 ('IB/core: Validate route when we init ah') Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/core: Eliminate sparse false context imbalance warningMatan Barak
When write_gid function needs to do a sleep-able operation, it unlocks table->rwlock and then relocks it. Sparse complains about context imbalance. This is safe as write_gid is always called with table->rwlock. write_gid protects from simultaneous writes to this GID entry by setting the GID_TABLE_ENTRY_INVALID flag. Fixes: 9c584f049596 ('IB/core: Change per-entry lock in RoCE GID table to one lock') Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/core: sysfs.c: Fix PerfMgt ClassPortInfo handlingHal Rosenstock
Port number is not part of ClassPortInfo attribute but is still needed as a parameter when invoking process_mad. To properly handle this attribute, port_num is added as a parameter to get_counter_table and get_perf_mad was changed not to store port_num in the attribute itself when it's querying the ClassPortInfo attribute. This handles issue pointed out by Matan Barak <matanb@dev.mellanox.co.il> Fixes: 145d9c541032 ('IB/core: Display extended counter set if available') Signed-off-by: Hal Rosenstock <hal@mellanox.com> Acked-by: Matan Barak <matanb@mellanox.com> Acked-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Christoph Lameter <cl@linux.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/core: Remove set-but-not-used variable from ib_sg_to_pages()Bart Van Assche
Detected this by building the IB core with W=1. See also patch "IB core: Fix ib_sg_to_pages()" (commit 8f5ba10ed40a). Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: Leon Romanovsky <leon.romanovsky@mellanox.com> Acked-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx5: Fix passing casted pointer in mlx5_query_port_roceLeon Romanovsky
Fix static checker warning: drivers/infiniband/hw/mlx5/main.c:149 mlx5_query_port_roce() warn: passing casted pointer '&props->qkey_viol_cntr' to 'mlx5_query_nic_vport_qkey_viol_cntr()' 32 vs 16. Fixes: 3f89a643eb29 ("IB/mlx5: Extend query_device/port to support RoCE") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mad: use CQ abstractionChristoph Hellwig
Remove the local workqueue to process mad completions and use the CQ API instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hal Rosenstock <hal@mellanox.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mad: pass ib_mad_send_buf explicitly to the recv_handlerChristoph Hellwig
Stop abusing wr_id and just pass the parameter explicitly. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hal Rosenstock <hal@mellanox.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19infiniband: Replace memset with eth_zero_addrLucas Tanure
Use eth_zero_addr to assign the zero address to the given address array instead of memset when second argument is address of zero. Signed-off-by: Lucas Tanure <tanure@linux.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx5: Delete locally redefined variableLeon Romanovsky
Fix the following sparse warning: drivers/infiniband/hw/mlx5/main.c:1061:29: warning: symbol 'pfn' shadows an earlier one drivers/infiniband/hw/mlx5/main.c:1030:21: originally declared here Fixes: d69e3bcf7976 ('IB/mlx5: Mmap the HCA's core clock register to user-space') Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19net/mlx4: Remove unused macroMoni Shoua
The macro mlx4_foreach_non_ib_transport_port() is not used anywhere. Remove it. Fixes: aa9a2d51a3e7 ("mlx4: Activate RoCE/SRIOV") Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx4: Take source mac from AH instead from the portMoni Shoua
In commit dbf727de7440 ("IB/core: Use GID table in AH creation and dmac resolution") we copy source mac to mlx4_ah from the attributes of gid at ib_ah_attr.grh.sgid_index. Now we can use it. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx4: Initialize hop_limit when creating address handleMatan Barak
Hop limit value wasn't copied from attributes when ah was created. This may influence packets for unconnected services to get dropped in routers when endpoints are not in the same subnet. Fixes: fa417f7b520e ("IB/mlx4: Add support for IBoE") Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx5: Expose correct maximum number of CQE capacityLeon Romanovsky
Maximum number of EQE capacity per CQ was mistakenly exposed as CQE. Fix that. Fixes: 938fe83c8dcb ("net/mlx5_core: New device capabilities handling") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Cc: <stable@vger.kernel.org> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19iw_cxgb4: Take clip reference before starting IPv6 listenHariprasad S
The h/w is designed in such a way that, if you do anything IPv6 related, a valid clip entry must be there. So take clip reference before creating IPv6 listening servers, and then if we fail to create server, release the clip entry. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19iw_cxgb4: Fixes GW-Basic labels to meaningful error namesHariprasad S
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19iw_cxgb4: Fixes static checker warning in c4iw_rdev_open()Hariprasad S
Commit c5dfb000b904 ("iw_cxgb4: Pass qid range to user space driver") from Dec 11, 2015, leads to the following static checker warning: drivers/infiniband/hw/cxgb4/device.c:857 c4iw_rdev_open() warn: variable dereferenced before check 'rdev->status_page' Also we weren't deallocating ocqp pool in error path when failed to allocate status page. Fixing it too. Fixes: c5dfb000b904 ("iw_cxgb4: Pass qid range to user space driver") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/cma: allocating too much memory in make_cma_ports()Dan Carpenter
The issue here is that there is a cut and paste bug. When we allocate cma_dev_group->default_ports_group we use "sizeof(*cma_dev_group->ports)" instead of "sizeof(*cma_dev_group->default_ports_group)". We're bumping up against the 80 character limit so I introduced a new local pointer "ports_group" to get around that. Fixes: 045959db65c6 ('IB/cma: Add configfs for rdma_cm') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19RDMA/nes: checking for NULL instead of IS_ERRDan Carpenter
nes_reg_phys_mr() returns ERR_PTRs on error. It doesn't return NULL. This bug has been there for a while, but we recently changed from calling a function pointer to calling nes_reg_phys_mr() directly so now Smatch is able to detect the bug. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/qib: Support creating qps with GFP_NOIO flagVinit Agnihotri
The current code is problematic when the QP creation and ipoib is used to support NFS and NFS desires to do IO for paging purposes. In that case, the GFP_KERNEL allocation in qib_qp.c causes a deadlock in tight memory situations. This fix adds support to create queue pair with GFP_NOIO flag for connected mode only to cleanly fail the create queue pair in those situations. Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Vinit Agnihotri <vinit.abhay.agnihotri@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19sunvnet: Initialize network_header and transport_header in vnet_rx_one()Sowmini Varadhan
vnet_fullcsum() accesses ip_hdr() and transport header to compute the checksum for IPv4 packets, so these need to be initialized in skb created in vnet_rx_one(). Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-19soreuseport: fix NULL ptr dereference SO_REUSEPORT after bindCraig Gallek
Marc Dionne discovered a NULL pointer dereference when setting SO_REUSEPORT on a socket after it is bound. This patch removes the assumption that at least one socket in the reuseport group is bound with the SO_REUSEPORT option before other bind calls occur. Fixes: e32ea7e74727 ("soreuseport: fast reuseport UDP socket selection") Reported-by: Marc Dionne <marc.c.dionne@gmail.com> Signed-off-by: Craig Gallek <kraig@google.com> Tested-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-19brcmfmac: fix sdio sg table alloc crashHante Meuleman
With commit 7d34b0560567 ("brcmfmac: Move all module parameters to one place") a bug was introduced causing a null pointer exception. This patch fixes the bug by initializing the sg table till after the settings have been initialized. Fixes: 7d34b0560567 ("brcmfmac: Move all module parameters to one place") Reported-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-19ssb: mark ssb_bus_register as __maybe_unusedArnd Bergmann
The SoC variant of the ssb code is now optional like the other ones, which means we can build the framwork without any front-end, but that results in a warning: drivers/ssb/main.c:616:12: warning: 'ssb_bus_register' defined but not used [-Wunused-function] This annotates the ssb_bus_register function as __maybe_unused to shut up the warning. A configuration like this will not work on any hardware of course, but we still want this to silently build without warnings if the configuration is allowed in the first place. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 845da6e58e19 ("ssb: add Kconfig entry for compiling SoC related code") Acked-by: Michael Buesch <m@bues.ch> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-19ssb: Set linux-wireless as MAINTAINERS listMichael Büsch
ssb patches go through the linux-wireless tree. Set the list to linux-wireless, so linux-wireless patchwork can catch the patches. Signed-off-by: Michael Buesch <m@bues.ch> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-21 17:40:52 +0000