summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-10-23Merge branch 'overlayfs.v25' of ↵Al Viro
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs into for-linus
2014-10-23fix inode leaks on d_splice_alias() failure exitsAl Viro
d_splice_alias() callers expect it to either stash the inode reference into a new alias, or drop the inode reference. That makes it possible to just return d_splice_alias() result from ->lookup() instance, without any extra housekeeping required. Unfortunately, that should include the failure exits. If d_splice_alias() returns an error, it leaves the dentry it has been given negative and thus it *must* drop the inode reference. Easily fixed, but it goes way back and will need backporting. Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-10-24MIPS: ftrace: Fix a microMIPS build problemMarkos Chandras
Code before the .fixup section needs to have the .insn directive. This has no side effects on MIPS32/64 but it affects the way microMIPS loads the address for the return label. Fixes the following build problem: mips-linux-gnu-ld: arch/mips/built-in.o: .fixup+0x4a0: Unsupported jump between ISA modes; consider recompiling with interlinking enabled. mips-linux-gnu-ld: final link failed: Bad value Makefile:819: recipe for target 'vmlinux' failed The fix is similar to 1658f914ff91c3bf ("MIPS: microMIPS: Disable LL/SC and fix linker bug.") Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: stable@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8117/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-24MIPS: MSP71xx: Fix build errorStefan Hengelein
When CONFIG_MIPS_MT_SMP is enabled, the following compilation error occurs: arch/mips/pmcs-msp71xx/msp_irq_cic.c:134: error: ‘irq’ undeclared This code clearly never saw a compiler. The surrounding code suggests, that 'd->irq' was intended, not 'irq'. This error was found with vampyr. Signed-off-by: Stefan Hengelein <stefan.hengelein@fau.de> Fixes: d7881fbdf866d7d0 ("MIPS: msp71xx: Convert to new irq_chip functions") Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8116/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-24fs: limit filesystem stacking depthMiklos Szeredi
Add a simple read-only counter to super_block that indicates how deep this is in the stack of filesystems. Previously ecryptfs was the only stackable filesystem and it explicitly disallowed multiple layers of itself. Overlayfs, however, can be stacked recursively and also may be stacked on top of ecryptfs or vice versa. To limit the kernel stack usage we must limit the depth of the filesystem stack. Initially the limit is set to 2. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24overlay: overlay filesystem documentationNeil Brown
Document the overlay filesystem. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24overlayfs: implement show_optionsErez Zadok
This is useful because of the stacking nature of overlayfs. Users like to find out (via /proc/mounts) which lower/upper directory were used at mount time. AV: even failing ovl_parse_opt() could've done some kstrdup() AV: failure of ovl_alloc_entry() should end up with ENOMEM, not EINVAL Signed-off-by: Erez Zadok <ezk@cs.sunysb.edu> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24overlayfs: add statfs supportAndy Whitcroft
Add support for statfs to the overlayfs filesystem. As the upper layer is the target of all write operations assume that the space in that filesystem is the space in the overlayfs. There will be some inaccuracy as overwriting a file will copy it up and consume space we were not expecting, but it is better than nothing. Use the upper layer dentry and mount from the overlayfs root inode, passing the statfs call to that filesystem. Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24overlay filesystemMiklos Szeredi
Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24shmem: support RENAME_WHITEOUTMiklos Szeredi
Allocate a dentry, initialize it with a whiteout and hash it in the place of the old dentry. Later the old dentry will be moved away and the whiteout will remain. i_mutex protects agains concurrent readdir. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Hugh Dickins <hughd@google.com>
2014-10-24ext4: support RENAME_WHITEOUTMiklos Szeredi
Add whiteout support to ext4_rename(). A whiteout inode (chrdev/0,0) is created before the rename takes place. The whiteout inode is added to the old entry instead of deleting it. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24vfs: add RENAME_WHITEOUTMiklos Szeredi
This adds a new RENAME_WHITEOUT flag. This flag makes rename() create a whiteout of source. The whiteout creation is atomic relative to the rename. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24vfs: add whiteout supportMiklos Szeredi
Whiteout isn't actually a new file type, but is represented as a char device (Linus's idea) with 0/0 device number. This has several advantages compared to introducing a new whiteout file type: - no userspace API changes (e.g. trivial to make backups of upper layer filesystem, without losing whiteouts) - no fs image format changes (you can boot an old kernel/fsck without whiteout support and things won't break) - implementation is trivial Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24vfs: export check_sticky()Miklos Szeredi
It's already duplicated in btrfs and about to be used in overlayfs too. Move the sticky bit check to an inline helper and call the out-of-line helper only in the unlikly case of the sticky bit being set. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24vfs: introduce clone_private_mount()Miklos Szeredi
Overlayfs needs a private clone of the mount, so create a function for this and export to modules. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24vfs: export __inode_permission() to modulesMiklos Szeredi
We need to be able to check inode permissions (but not filesystem implied permissions) for stackable filesystems. Expose this interface for overlayfs. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24vfs: export do_splice_direct() to modulesMiklos Szeredi
Export do_splice_direct() to modules. Needed by overlay filesystem. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24vfs: add i_op->dentry_open()Miklos Szeredi
Add a new inode operation i_op->dentry_open(). This is for stacked filesystems that want to return a struct file from a different filesystem. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23Merge tag 'remove-weak-declarations' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull weak function declaration removal from Bjorn Helgaas: "The "weak" attribute is commonly used for the default version of a function, where an architecture can override it by providing a strong version. Some header file declarations included the "weak" attribute. That's error-prone because it causes every implementation to be weak, with no strong version at all, and the linker chooses one based on link order. What we want is the "weak" attribute only on the *definition* of the default implementation. These changes remove "weak" from the declarations, leaving it on the default definitions" * tag 'remove-weak-declarations' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: uprobes: Remove "weak" from function declarations memory-hotplug: Remove "weak" from memory_block_size_bytes() declaration kgdb: Remove "weak" from kgdb_arch_pc() declaration ARC: kgdb: generic kgdb_arch_pc() suffices vmcore: Remove "weak" from function declarations clocksource: Remove "weak" from clocksource_default_clock() declaration x86, intel-mid: Remove "weak" from function declarations audit: Remove "weak" from audit_classify_compat_syscall() declaration
2014-10-23Merge branch 'x86-efi-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 EFI updates from Peter Anvin: "This patchset falls under the "maintainers that grovel" clause in the v3.18-rc1 announcement. We had intended to push it late in the merge window since we got it into the -tip tree relatively late. Many of these are relatively simple things, but there are a couple of key bits, especially Ard's and Matt's patches" * 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) rtc: Disable EFI rtc for x86 efi: rtc-efi: Export platform:rtc-efi as module alias efi: Delete the in_nmi() conditional runtime locking efi: Provide a non-blocking SetVariable() operation x86/efi: Adding efi_printks on memory allocationa and pci.reads x86/efi: Mark initialization code as such x86/efi: Update comment regarding required phys mapped EFI services x86/efi: Unexport add_efi_memmap variable x86/efi: Remove unused efi_call* macros efi: Resolve some shadow warnings arm64: efi: Format EFI memory type & attrs with efi_md_typeattr_format() ia64: efi: Format EFI memory type & attrs with efi_md_typeattr_format() x86: efi: Format EFI memory type & attrs with efi_md_typeattr_format() efi: Introduce efi_md_typeattr_format() efi: Add macro for EFI_MEMORY_UCE memory attribute x86/efi: Clear EFI_RUNTIME_SERVICES if failing to enter virtual mode arm64/efi: Do not enter virtual mode if booting with efi=noruntime or noefi arm64/efi: uefi_init error handling fix efi: Add kernel param efi=noruntime lib: Add a generic cmdline parse function parse_option_str ...
2014-10-23Merge branches 'pm-cpuidle' and 'pm-cpufreq'Rafael J. Wysocki
* pm-cpuidle: cpuidle: powernv: Populate cpuidle state details by querying the device-tree * pm-cpufreq: intel_pstate: Correct BYT VID values. intel_pstate: Fix BYT frequency reporting intel_pstate: Don't lose sysfs settings during cpu offline cpufreq: intel_pstate: Reflect current no_turbo state correctly cpufreq: expose scaling_cur_freq sysfs file for set_policy() drivers cpufreq: intel_pstate: Fix setting max_perf_pct in performance policy cpufreq: cpufreq-dt: adjust message related to regulators cpufreq: cpufreq-dt: extend with platform_data cpufreq: allow driver-specific data
2014-10-23Merge branches 'acpi-pm' and 'pm-genirq'Rafael J. Wysocki
* acpi-pm: ACPI: invoke acpi_device_wakeup() with correct parameters * pm-genirq: PCI / PM: handle failure to enable wakeup on PCIe PME
2014-10-23Merge branch 'freezer'Rafael J. Wysocki
* freezer: PM / freezer: Clean up code after recent fixes PM: convert do_each_thread to for_each_process_thread OOM, PM: OOM killed task shouldn't escape PM suspend freezer: remove obsolete comments in __thaw_task() freezer: Do not freeze tasks killed by OOM killer
2014-10-23Merge branch 'pm-qos'Rafael J. Wysocki
* pm-qos: PM / QoS: Add PM_QOS_MEMORY_BANDWIDTH class
2014-10-23Merge branches 'acpi-ec' and 'acpi-platform'Rafael J. Wysocki
* acpi-ec: ACPI / EC: Cleanup coding style. ACPI / EC: Refine event/query debugging messages. ACPI / EC: Add detailed command/query debugging information. ACPI / EC: Enhance the logs to apply to QR_EC transactions. ACPI / EC: Add CPU ID to debugging messages. * acpi-platform: ACPI / platform: provide default DMA mask
2014-10-23intel_pstate: Correct BYT VID values.Dirk Brandewie
Using a VID value that is not high enough for the requested P state can cause machine checks. Add a ceiling function to ensure calulated VIDs with fractional values are set to the next highest integer VID value. The algorythm for calculating the non-trubo VID from the BIOS writers guide is: vid_ratio = (vid_max - vid_min) / (max_pstate - min_pstate) vid = ceiling(vid_min + (req_pstate - min_pstate) * vid_ratio) Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-23intel_pstate: Fix BYT frequency reportingDirk Brandewie
BYT has a different conversion from P state to frequency than the core processors. This causes the min/max and current frequency to be misreported on some BYT SKUs. Tested on BYT N2820, Ivybridge and Haswell processors. Link: https://bugzilla.yoctoproject.org/show_bug.cgi?id=6663 Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-23intel_pstate: Don't lose sysfs settings during cpu offlineDirk Brandewie
The user may have custom settings don't destroy them during suspend. Link: https://bugzilla.kernel.org/show_bug.cgi?id=80651 Reported-by: Tobias Jakobi <liquid.acid@gmx.net> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-23cpufreq: intel_pstate: Reflect current no_turbo state correctlyGabriele Mazzotta
Some BIOSes modify the state of MSR_IA32_MISC_ENABLE_TURBO_DISABLE based on the current power source for the system battery AC vs battery. Reflect the correct current state and ability to modify the no_turbo sysfs file based on current state of MSR_IA32_MISC_ENABLE_TURBO_DISABLE. Link: https://bugzilla.kernel.org/show_bug.cgi?id=83151 Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com> Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-23cpufreq: expose scaling_cur_freq sysfs file for set_policy() driversDirk Brandewie
Currently the core does not expose scaling_cur_freq for set_policy() drivers this breaks some userspace monitoring tools. Change the core to expose this file for all drivers and if the set_policy() driver supports the get() callback use it to retrieve the current frequency. Link: https://bugzilla.kernel.org/show_bug.cgi?id=73741 Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-23cpufreq: intel_pstate: Fix setting max_perf_pct in performance policyPali Rohár
Code which changes policy to powersave changes also max_policy_pct based on max_freq. Code which change max_perf_pct has upper limit base on value max_policy_pct. When policy is changing from powersave back to performance then max_policy_pct is not changed. Which means that changing max_perf_pct is not possible to high values if max_freq was too low in powersave policy. Test case: $ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq 800000 $ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq 3300000 $ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor performance $ cat /sys/devices/system/cpu/intel_pstate/max_perf_pct 100 $ echo powersave > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor $ echo 800000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq $ echo 20 > /sys/devices/system/cpu/intel_pstate/max_perf_pct $ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor powersave $ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq 800000 $ cat /sys/devices/system/cpu/intel_pstate/max_perf_pct 20 $ echo performance > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor $ echo 3300000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq $ echo 100 > /sys/devices/system/cpu/intel_pstate/max_perf_pct $ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor performance $ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq 3300000 $ cat /sys/devices/system/cpu/intel_pstate/max_perf_pct 24 And now intel_pstate driver allows to set maximal value for max_perf_pct based on max_policy_pct which is 24 for previous powersave max_freq 800000. This patch will set default value for max_policy_pct when setting policy to performance so it will allow to set also max value for max_perf_pct. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Cc: All applicable <stable@vger.kernel.org> Acked-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-23Merge tag 'hwmon-for-linus-v3.18-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull a hwmon fix from Guenter Roeck: "Fix potential compile problem for menf21bmc hwmon driver" * tag 'hwmon-for-linus-v3.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (menf21bmc) Include linux/err.h
2014-10-23PCI / PM: handle failure to enable wakeup on PCIe PMELucas Stach
If the irqchip handling the PCIe PME interrupt is not able to enable interrupt wakeup we should properly reflect this in the PME suspend status. This fixes a kernel warning on resume, where it would try to disable the irq wakeup that failed to be activated while suspending, for example: WARNING: CPU: 0 PID: 609 at kernel/irq/manage.c:536 irq_set_irq_wake+0xc0/0xf8() Unbalanced IRQ 384 wake disable Fixes: 76cde7e49590 (PCI / PM: Make PCIe PME interrupts wake up from suspend-to-idle) Reported-and-tested-by: Richard Zhu <richard.zhu@freescale.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-23ACPI: invoke acpi_device_wakeup() with correct parametersZhang Rui
Fix a bug that invokes acpi_device_wakeup() with wrong parameters. Fixes: f35cec255557 (ACPI / PM: Always enable wakeup GPEs when enabling device wakeup) Signed-off-by: Zhang Rui <rui.zhang@intel.com> Cc: 3.17+ <stable@vger.kernel.org> # 3.17+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-23Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Intel, nouveau, radeon and qxl. Mostly for bugs introduced in the merge window, nothing too shocking" [ And one cirrus fix added later and not mentioned in the pull request.. - Linus ] * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/cirrus: bind also to qemu-xen-traditional qxl: don't create too large primary surface drm/nouveau: fix regression on agp boards drm/gt215/gr: fix initialisation on gddr5 boards drm/radeon: reduce sparse false positive warnings drm/radeon: fix vm page table block size calculation drm/ttm: Don't evict BOs outside of the requested placement range drm/ttm: Don't skip fpfn check if lpfn is 0 in ttm_bo_mem_compat drm/radeon: use gart memory for DMA ring tests drm/radeon: fix speaker allocation setup drm/radeon: initialize sadb to NULL in the audio code drm/i915: fix short vs. long hpd detection drm/i915: Don't trust the DP_DETECT bit for eDP ports on CHV Revert "drm/radeon/dpm: drop clk/voltage dependency filters for SI" Revert "drm/radeon: drop btc_get_max_clock_from_voltage_dependency_table" drm/i915: properly reenable gen8 pipe IRQs drm/i915: Move DIV_ROUND_CLOSEST_ULL macro to header drm/i915: intel_backlight scale() math WA
2014-10-23MIPS: Malta: Do not build the malta-amon.c file if CMP is not enabledMarkos Chandras
The malta-amon.c file provides functions to access the YAMON Monitoring interface to bring up secondary VPEs in case of SMP/CMP. As a result of which, there is no need to build it if CMP is not used. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/7993/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-23MIPS: Prevent compiler warning from cop2_{save,restore}Paul Burton
The no-op cases of cop2_save & cop2_restore lead to the following warnings being emitted during build with recent versions of gcc (tested using gcc 4.8.3 from the Mentor Sourcery CodeBench 2014.05 toolchain): In file included from ./arch/mips/include/asm/switch_to.h:18:0, from kernel/sched/core.c:78: kernel/sched/core.c: In function 'finish_task_switch': include/asm-generic/current.h:6:45: warning: value computed is not used [-Wunused-value] #define get_current() (current_thread_info()->task) ^ ./arch/mips/include/asm/cop2.h:48:32: note: in definition of macro 'cop2_restore' #define cop2_restore(r) do { (r); } while (0) ^ include/asm-generic/current.h:7:17: note: in expansion of macro 'get_current' #define current get_current() ^ ./arch/mips/include/asm/switch_to.h:114:16: note: in expansion of macro 'current' cop2_restore(current); \ ^ kernel/sched/core.c:2225:2: note: in expansion of macro 'finish_arch_switch' finish_arch_switch(prev); ^ Avoid the warning by "using" the value by casting to void. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7880/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-23MIPS: Kconfig: Add missing MIPS_CPS dependencies to PM and cpuidleMarkos Chandras
The MIPS_CPS_PM and MIPS_CPS_CPUIDLE implementation should depend on the MIPS_CPS symbol to avoid the following build problem arch/mips/kernel/pm-cps.c: In function 'cps_pm_enter_state': arch/mips/kernel/pm-cps.c:164:26: error: 'cpu_coherent_mask' undeclared (first use in this function) cpumask_clear_cpu(cpu, &cpu_coherent_mask); ^ Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/7798/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-23MIPS: idle: Remove leftover __pastwait symbol and its referencesMarkos Chandras
The __pastwait symbol was only used by the address_is_in_r4k_wait_irqoff function but this is no longer used since the SMTC removal in commit b633648c5ad3 ('MIPS: MT: Remove SMTC support'). That symbol also led to build failures under certain random configuration due to the way the compiler compiled the r4k_wait_irqoff function. If that function was called multiple times, the __pastwait symbol was redefined breaking the build like this: CHK include/generated/compile.h CC arch/mips/kernel/idle.o {standard input}: Assembler messages: {standard input}:527: Error: symbol `__pastwait' is already defined Link: http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=1244879922.24479.30.camel%40falcon Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/7791/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-23xen/pci: Allocate memory for physdev_pci_device_add's optarrBoris Ostrovsky
physdev_pci_device_add's optarr[] is a zero-sized array and therefore reference to add.optarr[0] is accessing memory that does not belong to the 'add' variable. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-10-23x86/xen: panic on bad Xen-provided memory mapMartin Kelly
Panic if Xen provides a memory map with 0 entries. Although this is unlikely, it is better to catch the error at the point of seeing the map than later on as a symptom of some other crash. Signed-off-by: Martin Kelly <martkell@amazon.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-10-23x86/xen: Fix incorrect per_cpu accessor in xen_clocksource_read()Boris Ostrovsky
Commit 89cbc76768c2 ("x86: Replace __get_cpu_var uses") replaced __get_cpu_var() with this_cpu_ptr() in xen_clocksource_read() in such a way that instead of accessing a structure pointed to by a per-cpu pointer we are trying to get to a per-cpu structure. __this_cpu_read() of the pointer is the more appropriate accessor. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-10-23x86/xen: avoid race in p2m handlingJuergen Gross
When a new p2m leaf is allocated this leaf is linked into the p2m tree via cmpxchg. Unfortunately the compare value for checking the success of the update is read after checking for the need of a new leaf. It is possible that a new leaf has been linked into the tree concurrently in between. This could lead to a leaked memory page and to the loss of some p2m entries. Avoid the race by using the read compare value for checking the need of a new p2m leaf and use ACCESS_ONCE() to get it. There are other places which seem to need ACCESS_ONCE() to ensure proper operation. Change them accordingly. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-10-23x86/xen: delay construction of mfn_list_listJuergen Gross
The 3 level p2m tree for the Xen tools is constructed very early at boot by calling xen_build_mfn_list_list(). Memory needed for this tree is allocated via extend_brk(). As this tree (other than the kernel internal p2m tree) is only needed for domain save/restore, live migration and crash dump analysis it doesn't matter whether it is constructed very early or just some milliseconds later when memory allocation is possible by other means. This patch moves the call of xen_build_mfn_list_list() just after calling xen_pagetable_p2m_copy() simplifying this function, too, as it doesn't have to bother with two parallel trees now. The same applies for some other internal functions. While simplifying code, make early_can_reuse_p2m_middle() static and drop the unused second parameter. p2m_mid_identity_mfn can be removed as well, it isn't used either. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-10-23x86/xen: avoid writing to freed memory after race in p2m handlingJuergen Gross
In case a race was detected during allocation of a new p2m tree element in alloc_p2m() the new allocated mid_mfn page is freed without updating the pointer to the found value in the tree. This will result in overwriting the just freed page with the mfn of the p2m leaf. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-10-23xen/balloon: Don't continue ballooning when BP_ECANCELED is encounteredBoris Ostrovsky
Commit 3dcf63677d4e ("xen/balloon: cancel ballooning if adding new memory failed") makes reserve_additional_memory() return BP_ECANCELED when an error is encountered. This error, however, is ignored by the caller (balloon_process()) since it is overwritten by subsequent call to update_schedule(). This results in continuous attempts to add more memory, all of which are likely to fail again. We should stop trying to schedule next iteration of ballooning when the current one has failed. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-10-23MIPS: Sibyte: Include the swarm subdir to the sb1250 LittleSur buildsMarkos Chandras
Fixes the following randconfig build problem: arch/mips/built-in.o: In function `show_cpuinfo': proc.c:(.text+0xde84): undefined reference to `get_system_type' arch/mips/built-in.o: In function `sb1250_setup': (.init.text+0x428): undefined reference to `get_system_type' arch/mips/built-in.o: In function `setup_arch': (.init.text+0x178c): undefined reference to `plat_mem_setup' Makefile:930: recipe for target 'vmlinux' failed Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8106/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-23MIPS: ptrace.h: Add a missing includeAaro Koskinen
Commit a79ebea62010 (MIPS: ptrace: Fix user pt_regs definition, use in ptrace_{get, set}regs()) converted struct pt_regs to use __u64. Some userspace applications (e.g. GDB) include this file directly, and fail to see this type. Fix by including <linux/types.h>. The patch fixes the following build failure with GDB 7.8 when using GLIBC headers created against Linux 3.17: In file included from /home/aaro/los/work/shared/gdb-7.8/gdb/mips-linux-nat.c:37:0: /home/aaro/los/work/mips/rootfs/mips-linux-gnu/usr/include/asm/ptrace.h:32:2: error: unknown type name '__u64' __u64 regs[32]; ^ /home/aaro/los/work/mips/rootfs/mips-linux-gnu/usr/include/asm/ptrace.h:35:2: error: unknown type name '__u64' __u64 lo; ^ /home/aaro/los/work/mips/rootfs/mips-linux-gnu/usr/include/asm/ptrace.h:36:2: error: unknown type name '__u64' __u64 hi; ^ Fixes: a79ebea62010 ("MIPS: ptrace: Fix user pt_regs definition, use in ptrace_{get, set}regs()") Cc: stable@vger.kernel.org # 3.17 Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Alex Smith <alex@alex-smith.me.uk> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8067/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-23drm/cirrus: bind also to qemu-xen-traditionalOlaf Hering
qemu as used by xend/xm toolstack uses a different subvendor id. Bind the drm driver also to this emulated card. Signed-off-by: Olaf Hering <olaf@aepfle.de> cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-10-22ARM: dts: socfpga: Add a 3.3V fixed regulator nodeDinh Nguyen
Without the 3.3V regulator node, the SDMMC driver will give these warnings: dw_mmc ff704000.dwmmc0: No vmmc regulator found dw_mmc ff704000.dwmmc0: No vqmmc regulator found This patch adds the regulator node, and points the SD/MMC to the regulator. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Reviewed-by: Doug Anderson <dianders@chromium.org> --- v3: Rename nodes to have schematic-name_regulator and remove "boot-on" and "always-on" v2: Move the regulator nodes to their respective board dts file and correctly rename them to match the schematic
generated by cgit v1.2.3 (git 2.46.0) at 2025-08-01 01:27:03 +0000