summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-07-27ARM: Kirkwood: Use DT to configure SATA device.Andrew Lunn
Convert boards using DT, but the old way of configuring SATA to now use properties in there DT file. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Simon Baatz <gmbnomis@gmail.com>
2012-07-27ARM: kirkwood: use devicetree for SPI on dreamplugMichael Walle
Use the device tree for the SPI driver and partition layout. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-07-27ARM: kirkwood: Add LS-XHL and LS-CHLv2 supportMichael Walle
Add support for Buffalo Linkstation LS-XHL and LS-CHLv2 using the device tree where possible. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-07-27ARM: Kirkwood: Initial DTS support for Kirkwood GoFlex NetJosh Coombs
This patch supplies the necessary DTS and supporting files to boot up a Seagate GoFlex Net with 3.5.0-rc3. Signed-off-by: Joshua Coombs <josh.coombs@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-07-27ARM: Kirkwood: Add basic device tree support for QNAP TS219.Andrew Lunn
The two different variants of QNAP TS devices, varying by SoC, put the GPIO keys on different GPIO lines. Hence we need two different DT board descriptions, which share the same board-ts219.c file. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net>
2012-07-27ATA: sata_mv: Add device tree supportAndrew Lunn
Add support for instantiating this driver from device tree, and add the necassary DT information to the kirkwood.dtsi file. This is based on previous work by Michael Walle and Jason Cooper. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Josh Coombs <josh.coombs@gmail.com>
2012-07-27ARM: Orion: DTify the watchdog timer.Andrew Lunn
Add device tree support to the Orion watchdog timer, and enable its use in the kirkwood devices using device tree. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com>
2012-07-27ARM: Orion: Add arch support needed for I2C via DT.Andrew Lunn
The MV64XXX I2C driver needs a clock in order to calculate the baud rate factors. So add an clk to the clk tree. Also add the base DT properties for kirkwood devices. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Conflicts: arch/arm/mach-kirkwood/common.c
2012-07-27ARM: kirkwood: use devicetree for orion-spiMichael Walle
Populate the devices with auxdata to set the device names which are used by clkdev to lookup the clocks. Signed-off-by: Michael Walle <micheal@walle.cc> Signed-off-by: Andrew Lunn <andrew@lunn.ch> --- v2: Add interrupts properties, although not used.
2012-07-27ARM: Orion: DT support for IRQ and GPIO ControllersAndrew Lunn
Both IRQ and GPIO controllers can now be represented in DT. The IRQ controllers are setup first, and then the GPIO controllers. Interrupts for GPIO lines are placed directly after the main interrupts in the interrupt space. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Josh Coombs <josh.coombs@gmail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com>
2012-07-27Merge branch 'v3.5-rc7-fixes' into v3.5-rc7-dt-v3Andrew Lunn
Merge in branch already pulled. Fulfils dependancies needed by this patchset.
2012-07-27Merge tag 'spi-3.6' into v3.5-rc7-dt-v3Andrew Lunn
spi: Updates for 3.6 Since Grant is even more specacularly busy than usual for the time being I've been collecting SPI patches for him for this release - probably things will revert back to Grant before the next release. There's nothing too exciting here, mostly it's simple driver specific stuff: - Add spi: to the modaliases of SPI devices to provide namespacing. - A driver for AD-FMCOMMS1-EBZ. - DT binding for Orion. - Fixes and cleanups for i.MX, PL0022, OMAP and bitbang drivers. There may be a few more fixes I've missed, people keep sending me new things.
2012-07-27dm thin: commit before gathering statusAlasdair G Kergon
Commit outstanding metadata before returning the status for a dm thin pool so that the numbers reported are as up-to-date as possible. The commit is not performed if the device is suspended or if the DM_NOFLUSH_FLAG is supplied by userspace and passed to the target through a new 'status_flags' parameter in the target's dm_status_fn. The userspace dmsetup tool will support the --noflush flag with the 'dmsetup status' and 'dmsetup wait' commands from version 1.02.76 onwards. Tested-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin: add read only and fail io modesJoe Thornber
Add read-only and fail-io modes to thin provisioning. If a transaction commit fails the pool's metadata device will transition to "read-only" mode. If a commit fails once already in read-only mode the transition to "fail-io" mode occurs. Once in fail-io mode the pool and all associated thin devices will report a status of "Fail". Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: introduce dm_pool_abort_metadataJoe Thornber
Introduce dm_pool_abort_metadata to abort the current metadata transaction. Generally this will only be called when bad things are happening and dm-thin is trying to roll back to a good state for read-only mode. It's complicated by the fact that the metadata device may have failed completely causing the abort to be unable to read the old transaction. In this case the metadata object is placed in a 'fail' mode and everything fails apart from destroying it. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: introduce dm_pool_metadata_set_read_onlyJoe Thornber
Introduce dm_pool_metadata_set_read_only to put the underlying block manager into read-only mode. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm persistent data: introduce dm_bm_set_read_onlyJoe Thornber
Introduce dm_bm_set_read_only to switch the block manager into a read-only mode. To be used when dm-thin degrades due to io errors on the metadata device. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin: reduce number of metadata commitsJoe Thornber
Reduce the number of metadata commits by using dm_thin_changed_this_transaction to check if metadata was changed on a per thin device granularity. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: add dm_thin_changed_this_transactionJoe Thornber
Introduce dm_thin_changed_this_transaction to dm-thin-metadata to publish a useful bit of information we're already tracking. This will help dm thin decide when to commit. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: add format option to dm_pool_metadata_openJoe Thornber
Add a parameter to dm_pool_metadata_open to indicate whether or not an unformatted metadata area should be formatted. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: tidy up open and format error pathsJoe Thornber
Tidy up error path in __open_metadata and __format_metadata in dm-thin-metadata. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: only check incompat features on openMike Snitzer
Factor out __check_incompat_features and only call it once when we open the metadata device rather than at the beginning of every transaction. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: remove duplicate pmd initialisationJoe Thornber
Remove some duplicate initialisation of struct dm_pool_metadata. These pmd fields are initialised by both: __format_metadata's calls to dm_btree_empty __write_initial_superblock + __begin_transaction Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: remove create parameter from __create_persistent_data_objectsJoe Thornber
Remove 'create' parameter from __create_persistent_data_objects() in dm-thin-metadata. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: move __superblock_all_zeroes to __open_or_format_metadataJoe Thornber
Move the check for __superblock_all_zeroes from __create_persistent_data_objects() down to __open_or_format_metadata in dm-thin-metadata. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: remove nr_blocks arg from __create_persistent_data_objectsJoe Thornber
Remove nr_blocks arg from __create_persistent_data_objects in dm-thin-metadata. It was always passed as zero. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: split __open or format metadataJoe Thornber
Split __open_or_format_metadata into __format_metadata and __open_metadata in dm-thin-metadata. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: use struct dm_pool_metadata members in ↵Joe Thornber
__open_or_format_metadata Clean up __open_or_format_metadata in dm-thin-metadata by using struct dm_pool_metadata members to replace local variables. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: zero unused superblock uuidJoe Thornber
Zero the unused uuid when initialising the metadata superblock. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: lift __begin_transaction out of __write_initial_superblockJoe Thornber
Lift the call to __begin_transaction out of __write_initial_superblock in dm-thin-metadata. Called higher up the call chain now. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: move dm_commit_pool_metadata into __write_initial_superblockJoe Thornber
Move dm_commit_pool_metadata inline into __write_initial_superblock in dm-thin-metadata. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: factor out __write_initial_superblockJoe Thornber
Factor out __write_initial_superblock and also pull some other initial creation code out of dm_pool_metadata_open. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: lift some initialisation out of __open_or_format_metadataJoe Thornber
Lift some initialisation out of __open_or_format_metadata in dm-thin-metadata. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: factor __destroy_persistent_data out of dm_pool_metadata_closeJoe Thornber
Factor __destroy_persistent_data_objects out of dm_pool_metadata_close. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: move bm creation code into create_persistent_data_objectsJoe Thornber
Move block manager creation and the check for unformatted metadata into __create_persistent_data_objects(). Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: rename init_pmd to __create_persistent_data_objectsJoe Thornber
Rename init_pmd to __create_persistent_data_objects in dm-thin-metadata. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: wrap superblock lockingJoe Thornber
Introduce wrappers to handle write locking the superblock appropriately. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm persistent data: stop using dm_bm_unlock_move when shadowing blocks in tmJoe Thornber
Stop using dm_bm_unlock_move when shadowing blocks in the transaction manager as an optimisation and remove the function as it is then no longer used. Some code, such as the space maps, keeps using on-disk data structures from the previous transaction. It can do this because blocks won't be reallocated until the subsequent transaction. Using dm_bm_unlock_move to copy blocks sounds like a win, but it forces a synchronous read should the old block be accessed. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm persistent data: tidy transaction manager creation fnsJoe Thornber
Tidy the transaction manager creation functions. They no longer lock the superblock. Superblock locking is pulled out to the caller. Also export dm_bm_write_lock_zero. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: stop tracking need for commitJoe Thornber
Remove an optimisation that tracks whether or not a thin metadata commit is needed. If dm_pool_commit_metadata() is called and no changes have been made to the metadata then this optimisation avoided writing to disk. Removing because we're going to do something better later. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm persistent data: create new dm_block_manager structJoe Thornber
This patch introduces a separate struct for the block_manager. It also uses IS_ERR to check the return value of dm_bufio_client_create instead of testing incorrectly for NULL. Prior to this patch a struct dm_block_manager was really an alias for a struct dm_bufio_client. We want to add some functionality to the block manager that will require extra fields, so this one to one mapping is no longer valid. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: factor __setup_btree_details out of init_pmdJoe Thornber
Factor __setup_btree_details out of init_pmd in dm-thin-metadata. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm: use bool bitfields in struct dm_targetAlasdair G Kergon
Use boolean bit fields for flags in struct dm_target. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin: set flush_supportedJoe Thornber
The thin provisioning target commits internal metadata on flush. So it should receive flushes regardless of whether the underlying devices support them. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm: allow targets to request flushes regardless of underlying device supportJoe Thornber
Allow targets to override the 'supports flush' calculation. Set 'flush_supported' if a target needs to receive flushes regardless of whether or not its underlying devices have support. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm persistent data: only commit space map if index changedJoe Thornber
Introduce bitmap_index_changed to track whether or not the index changed then only commit a space map if it did. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm persistent data: always unlock superblock in dm_bm_flush_and_unlockJoe Thornber
Unlock the superblock even if initial dm_bufio_write_dirty_buffers fails. Also, remove redundant flush calls. dm_bm_flush_and_unlock's calls to dm_bufio_write_dirty_buffers already result in dm_bufio_issue_flush being called. This avoids warnings about unflushed dirty buffers from bufio. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin: avoid unnecessarily breaking sharing for flushesJoe Thornber
There's no need to break sharing, triggering a copy, for a write that has no data (i.e. a flush). Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin: fix memory leak in process_prepared_mapping error pathsJoe Thornber
Fix memory leak in process_prepared_mapping by always freeing the dm_thin_new_mapping structs from the mapping_pool mempool on the error paths. Signed-off-by: Joe Thornber <ejt@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm crypt: rename struct convert_context sector fieldMikulas Patocka
Rename sector to cc_sector in dm-crypt's convert_context struct. This is preparation for a future patch that merges dm_io and convert_context which both have a "sector" field. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-30 10:56:40 +0000