summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-04-23fsl_pq_mdio: Fix kernel oops during OF address translationAnton Vorontsov
Old P1020RDB device trees were not specifing tbipa address for MDIO nodes, which is now causing this kernel oops: ... eth2: TX BD ring size for Q[6]: 256 eth2: TX BD ring size for Q[7]: 256 Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc0015504 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c0015504] memcpy+0x3c/0x9c LR [c000a9f8] __of_translate_address+0xfc/0x21c Call Trace: [df839e00] [c000a94c] __of_translate_address+0x50/0x21c (unreliable) [df839e50] [c01a33e8] get_gfar_tbipa+0xb0/0xe0 ... The old device trees are buggy, though having a dead ethernet is better than a dead kernel, so fix the issue by using of_iomap(). Also, a somewhat similar issue exist in the probe() routine, though there the oops is only a possibility. Nonetheless, fix it too. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-23omap: delete unused bootloader tag variablesAaro Koskinen
They are not needed and add over 512 bytes to kernel data. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: Devkit8000: Remove unused pinsThomas Weber
Old code from original patch contains beagle board pins that are not available on the Devkit8000. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: Devkit8000: Change position of init callsThomas Weber
Change position of calling serial and ethernet initialization. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: Devkit8000: Remove unnecessary include fileThomas Weber
Remove include otg.h. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: Devkit8000: Fix typo in pin nameThomas Weber
Replace wrong sdr_cke[01] with sdrc_cke[01]. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: Devkit8000: Add missing package selectionThomas Weber
Devkit8000 uses the CUS package for OMAP3530. This patch adds missing package selection for CUS and enables CONFIG_MUX. Replace whitespace with tab in Kconfig. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: Devkit8000: Fix typo in suppliesThomas Weber
Replace wrong vdss_dsi with vdds_dsi. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23n8x0_defconfig: remove CONFIG_NILFS2_FS overrideFrancisco Alecrim
arch/arm/configs/n8x0_defconfig:1061:warning: override: reassigning to symbol NILFS2_FS Signed-off-by: Francisco Alecrim <francisco.alecrim@openbossa.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: board-sdp-flash.c: Fix typos in debug outputThomas Weber
Corrected type of flash in output (OneNAND => NOR). Removed whitespace after newline in output. Removed double whitespace in output. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap4: Fix McBSP4 base addressSantosh Shilimkar
This patch fixes the McBSP4 base address for OMAP4 Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: rx51_defconfig: Remove CONFIG_SYSFS_DEPRECATED*=y optionsJarkko Nikula
Modern udev will not work with the CONFIG_SYSFS_DEPRECATED*=y options and it seems also that the Maemo release works without when testing with the Maemo 2.6.28 kernel. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: rx51_defconfig: Remove duplicate phonetJarkko Nikula
Phonet is enabled by the commit bce54fed941e03695ab557100a4bd1e457abca42 and this duplicate gives a warning when doing make rx51_defconfig. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: fix a gpmc nand problemstanley.miao
If gpmc_t isn't given, we don't need to set timing for gpmc, or it will cause a Oops. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23AM3517: initialize i2c subsystem after mux subsystemstanley.miao
The initialize of i2c subsystem will set pinmux, so it should be done after the initialize of mux subsystem initialization. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: remove one of the define of INT_34XX_BENCH_MPU_EMULstanley.miao
INT_34XX_BENCH_MPU_EMUL was defined twice, another is at Line 312. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: fix the compile error if CONFIG_MTD_NAND_OMAP2 is notenabledstanley.miao
If CONFIG_MTD_NAND_OMAP2 is not enabled, there will be a compile error, "gpmc_nand_init() is not defined". Add a inline noop function to fix it. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23OMAP4: Clocks: Change SPI Instance NamesAbraham Arce
Change the name for the spi instances on omap44xx_clks to match the names omap2 spi driver gives: omap-mcspi.1 -> omap2_mcspi.1 omap-mcspi.2 -> omap2_mcspi.2 omap-mcspi.3 -> omap2_mcspi.3 omap-mcspi.4 -> omap2_mcspi.4 Signed-off-by: Abraham Arce <x0066660@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: Devkit8000: Fix wrong usb port on Devkit8000Thomas Weber
Disable the nonexistent ehci port on Devkit8000. Signed-off-by: Thomas Weber <weber@corscience.de> Acked-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23OMAP4: Fix for CONTROL register BaseSantosh Shilimkar
This patch fixes the base address of CONTROL register on OMAP4430SDP. The control base is used by peripherals like MMC1 for PBIAS configuration. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23OMAP4-HSMMC: FIX for MMC5 Controller IRQ Basekishore kadiyala
This patch fixes HSMMC Controller5 IRQ Base. Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap3: Fix EHCI port for IGEP v2 boardEnric Balletbo i Serra
IGEP v2 uses EHCI port 1 instead of EHCI port 2. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: Fix n8x0 mmc_mmc_init compile warnings and typosTony Lindgren
Fix warning: 'return' with a value, in function returning void in n8x0_mmc_init. Also fix a search and replace typo. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap2: Fix ARM processor check for 24xxTony Lindgren
The value to check is 7 for V6 instead. The code has been working as it falls through to 24xx code if the other checks fail. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap4: Fix build break when used with gcc-4.4.1 (2009-q3)Richard Woodruff
This patch adds argument to smc calls as gcc-4.4.1 requires it otherwise the build breaks with 2009-q3 toolchanin. arch/arm/mach-omap2/omap-headsmp.S: Assembler messages: arch/arm/mach-omap2/omap-headsmp.S:36: Error: missing expression -- `smc' arch/arm/mach-omap2/omap-headsmp.S:55: Error: missing expression -- `smc' arch/arm/mach-omap2/omap-headsmp.S:63: Error: missing expression -- `smc' make[1]: *** [arch/arm/mach-omap2/omap-headsmp.o] Error 1 Signed-off-by: Richard Woodruff <r-woodruff2@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23eeepc-laptop: add missing sparse_keymap_freeCorentin Chary
Also remove legacy keymap which was not used since we use sparse_keymap. Signed-off-by: Corentin Chary <corentincj@iksaif.net>
2010-04-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda: Use STAC_DELL_M6_BOTH quirk for Dell Studio 1558 ALSA: hda: Use LPIB quirk for DG965OT board version AAD63733-203 ALSA: snd-meastro3: Ignore spurious HV interrupts during suspend / resume ALSA: snd-meastro3: Add amp_gpio quirk for Compaq EVO N600C ALSA: hda: Use ALC880_F1734 quirk for Fujitsu Siemens AMILO Xi 1526 ALSA: hda: Use STAC_DELL_M6_BOTH quirk for Dell Studio XPS 1645 ALSA: hda - Fix resume from StR of HP 2510p with docking-station
2010-04-23Cleanup generic block based fiemapJosef Bacik
This cleans up a few of the complaints of __generic_block_fiemap. I've fixed all the typing stuff, used inline functions instead of macros, gotten rid of a couple of variables, and made sure the size and block requests are all block aligned. It also fixes a problem where sometimes FIEMAP_EXTENT_LAST wasn't being set properly. Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-23drm/i915: fix non-Ironlake 965 class crashesJesse Barnes
My PIPE_CONTROL fix (just sent via Eric's tree) was buggy; I was testing a whole set of patches together and missed a conversion to the new HAS_PIPE_CONTROL macro, which will cause breakage on non-Ironlake 965 class chips. Fortunately, the fix is trivial and has been tested. Be sure to use the HAS_PIPE_CONTROL macro in i915_get_gem_seqno, or we'll end up reading the wrong graphics memory, likely causing hangs, crashes, or worse. Reported-by: Zdenek Kabelac <zdenek.kabelac@gmail.com> Reported-by: Toralf Förster <toralf.foerster@gmx.de> Tested-by: Toralf Förster <toralf.foerster@gmx.de> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-23Merge branch 'fix/misc' into for-linusTakashi Iwai
2010-04-23Merge branch 'fix/hda' into for-linusTakashi Iwai
2010-04-23drm/radeon/kms/evergreen: No EnableYUV tableAlex Deucher
DCE4 cards don't have an EnableYUV table. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-23ALSA: hda: Use STAC_DELL_M6_BOTH quirk for Dell Studio 1558Daniel T Chen
BugLink: https://launchpad.net/bugs/568600 The OR has verified that the dell-m6 model quirk is necessary for audio to be audible by default on the Dell Studio XPS 1645. This change is necessary for 2.6.32.11 and 2.6.33.2 alike. Reported-by: Andy Ross <andy@plausible.org> Tested-by: Andy Ross <andy@plausible.org> Cc: <stable@kernel.org> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-04-23ALSA: hda: Use LPIB quirk for DG965OT board version AAD63733-203Daniel T Chen
BugLink: https://launchpad.net/bugs/459083 The OR has verified with 2.6.32.11 and the latest alsa-driver stable daily snapshot that position_fix=1 is necessary for the external mic to work and for PulseAudio not to crash constantly. This patch is necessary also for 2.6.32.11 and 2.6.33.2. Reported-by: <imwithid@yahoo.com> Tested-by: <imwithid@yahoo.com> Cc: <stable@kernel.org> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-04-23drm/radeon: 9800 SE has only one quadpipeTormod Volden
Although these cards have 2 pipelines on the silicon only the first passed the QA and the other should be disabled. http://www.digital-daily.com/video/ati-radeon9800se/ http://www.rojakpot.com/showarticle.aspx?artno=101&pgno=1 agd5f: add some other SE cards as well; fix up kms Signed-off-by: Tormod Volden <debian.tormod@gmail.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-23drm/radeon/kms: don't print error for legal crtcs.Dave Airlie
With evergreen this is bounded by num_crtc not by 0,1. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-23drm/radeon/kms/evergreen: fix LUT setupAlex Deucher
Must have gotten broken during an earlier rebase. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-22Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: ensure NCQ error result taskfile is fully initialized before returning it via qc->result_tf. libata: fix docs, RE port and device of libata.force ID separated by point pata_pcmcia/ide-cs: add IDs for transcend and kingston cards libata: fix locking around blk_abort_request()
2010-04-22tcp: bind() fix when many ports are boundEric Dumazet
Port autoselection done by kernel only works when number of bound sockets is under a threshold (typically 30000). When this threshold is over, we must check if there is a conflict before exiting first loop in inet_csk_get_port() Change inet_csk_bind_conflict() to forbid two reuse-enabled sockets to bind on same (address,port) tuple (with a non ANY address) Same change for inet6_csk_bind_conflict() Reported-by: Gaspar Chilingarov <gasparch@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-22libata: ensure NCQ error result taskfile is fully initializedJeff Garzik
before returning it via qc->result_tf. Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-04-23squashfs: fix locking bug in zlib wrapperPhillip Lougher
Fix locking bug in zlib wrapper introduced by recent decompressor changes. Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2010-04-22libata: fix docs, RE port and device of libata.force ID separated by pointRoman Fietze
According to libata-core correctly around line 6572: /* parse id */ p = strchr(id, '.'); ... the optional device is separated from the port in the libata.force ID by a point or dot instead of by a colon. Fix documentation to reflect this. Signed-off-by: Roman Fietze <roman.fietze@telemotive.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-04-22pata_pcmcia/ide-cs: add IDs for transcend and kingston cardsKristoffer Ericson
This patch adds idstrings for Kingston 1GB/4GB and Transcend 4GB/8GB. Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-04-22libata: fix locking around blk_abort_request()Tejun Heo
blk_abort_request() expectes queue lock to be held by the caller. Grab it before calling the function. Lack of this synchronization led to infinite loop on corrupt q->timeout_list. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-04-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: usb: Increase timeout value for device reset USB: put claimed interfaces in the "suspended" state USB: EHCI: defer reclamation of siTDs USB: fix remote wakeup settings during system sleep USB: pl2303: add AdLink ND-6530 USB IDs USB: Add id for HP ev2210 a.k.a Sierra MC5725 miniPCI-e Cell Modem. USB: OHCI: DA8xx/OMAP-L1x: fix up macro rename USB: qcaux: add LG Rumor and Sanyo Katana LX device IDs usb: wusb: don't overflow the Keep Alive IE buffer USB: ehci: omap: fix kernel panic with rmmod USB: fixed bug in usbsevseg using USB autosuspend incorrectly USB: ti_usb_3410_5052: adding multitech dialup fax/modem devices
2010-04-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: sysfs: use sysfs_attr_init in ASUS atk0110 driver Documentation/HOWTO: update git home URL Documentation: -stable rules: upstream commit ID requirement reworded
2010-04-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: use PIPE_CONTROL instruction on Ironlake and Sandy Bridge drm/i915: cleanup FBC buffers at unload time drm/i915: fix tiling limits for i915 class hw v2 drm/i915: set DIDL using the ACPI video output device _ADR method return. drm/i915: Fix 82854 PCI ID, and treat it like other 85X drm/i915: Attempt to fix watermark setup on 85x (v2)
2010-04-22Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds
* 'for-linus' of git://neil.brown.name/md: md/raid5: fix previous patch.
2010-04-22omap: DMA: Init CDAC to zeromanjugk manjugk
The register DMA4_CDAC needs to be initialized to zero before starting DMA transfer. Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Govindraj R <govindraj.raja@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Reported-by:S, Venkatraman <svenkatr@ti.com> Signed-off-by: Manjunatha GK <manjugk@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-22omap: gpio: fix incorrect matching of IRQ_TYPE_EDGE_BOTHJanusz Krzysztofik
Since IRQ_TYPE_EDGE_BOTH is defined as (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING), testing against it with a bitwise AND also matches both single-edge cases in addition to the intended both edges case. Fix it, replacing with a more accurate expression. Created and tested againts linux-2.6.34-rc3. Applicable to 2.6.33-stable as well. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-23 23:40:42 +0000