summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-09-25Merge tag 'at91-dt3' of git://github.com/at91linux/linux-at91 into next/dtArnd Bergmann
Pull "More AT91 DT material for 3.18" from Nicolas Ferre: - specify DMA channels for USART on sama5d3 and choose peripherals that will use them on the EK boards - SSC update for audio on at91sam9rl and at91sam9g20 - addition of the NFC clock and new pinctrl compatible string to use enhancements that will land in drivers during this release - several new nodes and fixes Signed-off-by: Arnd Bergmann <arnd@arndb.de> * tag 'at91-dt3' of git://github.com/at91linux/linux-at91: ARM: at91/dt: at91sam9m10g45ek add rtc node ARM: at91/dt: sama5d3: use new pinctrl compatible string ARM: at91/dt: sama5d3: add the nfc clock ARM: at91/dt: declare sckc node on at91sam9g45 ARM: at91/dt: Fix typo regarding can0_clk ARM: at91/dt: at91sam9g20: switch ssc compatible string ARM: at91/dt: at91sam9rl: switch ssc compatible string ARM: at91: sama5d3xek: reserve dma channel for audio ARM: at91: sama5d3: add usart dma configurations
2014-09-25Merge tag 'zynq-dt-for-3.18' of git://git.xilinx.com/linux-xlnx into next/dtArnd Bergmann
Pull "arm: Xilinx Zynq dt patches for v3.18" from Michal Simek: - Add eth phys - Add led for zc702 - Various dts cleanups Signed-off-by: Arnd Bergmann <arnd@arndb.de> * tag 'zynq-dt-for-3.18' of git://git.xilinx.com/linux-xlnx: ARM: zynq: Add ISL9305 regulator on Parallella board ARM: zynq: DT: Add Ethernet phys ARM: zynq: DT: Fix coding style issues in dtsi ARM: zynq: DT: Describe interrupt-names for pl330 ARM: zynq: DT: Extend compatible string for zedboard ARM: zynq: DT: Use 0x prefix for memory nodes ARM: zynq: DT: Update years in header ARM: zynq: DT: Move size/address properties to dtsi ARM: zynq: DT: Fix Ethernet phy modes ARM: zynq: DT: Add LEDs to zc702 DT
2014-09-25ARM: meson: documentation: add bindings documentationCarlo Caione
Add vendor prefixes and basic documentation for MesonX SoCs bindings Signed-off-by: Carlo Caione <carlo@caione.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-09-25ARM: meson: dts: add basic Meson/Meson6/Meson6-atv1200 DTSI/DTSCarlo Caione
The Meson6 SoC is produced by Amlogic inc. and it is based on 2 Cortex A9 and an ARM Mali-400 GPU. This patch adds two basic DTSI for the preliminary support of Meson and Meson6 SoCs. Another DTS is also added for supporting the atv1200 board, produced by Geniatech inc. Signed-off-by: Carlo Caione <carlo@caione.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-09-24Merge tag 'imx-dt-3.18' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt Merge "ARM: imx: device tree changes for 3.18" from Shawn Guo: The i.MX device tree changes for 3.18: - Device tree support for i.MX ADS and Armadeus APF9328 boards - Enable thermal sensor support for i.MX6SL - Add LCD support for i.MX6SL EVK board - Fix display duplicate name for a bunch of board dts files - Configure imx6qdl-sabresd board pins locally to remove the dependency on bootloader - A set of imx28-tx28 board dts updates from Lothar - Add pci config space as platform resource - Enable devices RTC, I2C and HDMI for nitrogen6x board - Split HummingBoard DT to support s/dl and d/q - mSATA and IR input support for HummingBoard - Add SSI baud clock for i.MX6 device trees - Add USB support for vf610-colibri and vf610-twr boards - A set of cleanup and updates on Gateworks boards * tag 'imx-dt-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (86 commits) ARM: dts: imx6: make gpt per clock can be from OSC ARM: dts: imx: ventana: add canbus support for GW52xx ARM: dts: imx: ventana: cleanup pinctrl groups ARM: dts: imx: ventana: configure padconf for all pins ARM: dts: imx: ventana: use gpio constants ARM: dts: imx: ventana: remove unused aliases ARM: dts: imx: ventana: remove unsupported dt nodes ARM: dts: imx28-tx28: add alias for CAN XCVR regulator ARM: dts: imx28-tx28: add spi-gpio as alternative for spi-mxs ARM: dts: imx28-tx28: use GPIO flags ARM: dts: imx28-tx28: remove spidev labels and add third instance of spidev ARM: dts: imx6sl: add baud clock and clock-names for ssi ARM: dts: imx6qdl: add baud clock and clock-names for ssi ARM: dts: imx6qdl-sabresd: Configure the pins locally ARM: dts: imx28-m28evk: Fix display duplicate name warning ARM: dts: imx28-tx28: Fix display duplicate name warning ARM: dts: imx28-m28cu: Fix display duplicate name warning ARM: dts: imx28-cfa100: Fix display duplicate name warning ARM: dts: imx28-apf28dev: Fix display duplicate name warning ARM: dts: imx28-apx4devkit: Fix display duplicate name warning ... Signed-off-by: Olof Johansson <olof@lixom.net>
2014-09-24ARM: dts: mt6589: Change compatible string for GICMatthias Brugger
This patch changes the compatible string of the GIC to the new "arm,cortex-a7-gic" which does reflect the actual hardware. Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-09-24ARM: dts: mediatek: Add compatible property for aquaris5Matthias Brugger
Add the missing 'compatible' property to device tree root node of - mt6589-aquaris5.dts and document the new values. Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-09-24ARM: dts: mt6589-aquaris5: Add boot argument earlyprintkMatthias Brugger
Add boot argument for earlyprintk to the aquaris5 device tree file. Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-09-24ARM: dts: mt6589: Fix typo in GIC unit addressMatthias Brugger
This changes the unit address of the gic node to it's first register area. Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-09-24ARM: dts: Build dtb for Mediatek boardMatthias Brugger
This allows the "make dtbs" to build the aquaris5 dtb for the Mediatek SoC. Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-09-24Merge tag 'mvebu-dt-3.18' of git://git.infradead.org/linux-mvebu into next/dtOlof Johansson
Merge "ARM: mvebu: DT changes for v3.18" from Jason Cooper: mvebu DT changes for v3.18 - Armada 375 - Add RTC support - Armada 370 - Add proper pinmuxing - Add SSCG - Add gpio-fan - Add LED support - change Intersil vendor prefix to isil - use improved Armada SPI compatible string * tag 'mvebu-dt-3.18' of git://git.infradead.org/linux-mvebu: ARM: mvebu: add user LED support of Armada 370 RD ARM: mvebu: add gpio fan support to Armada 370 RD ARM: mvebu: Change vendor prefix for Intersil Corporation to isil ARM: mvebu: use improved armada spi device tree compatible name ARM: mvebu: add SSCG to Armada 370 Device Tree ARM: mvebu: Add proper pin muxing on Armada 370 RD board ARM: mvebu: Add proper pin muxing on Netgear ReadyNAS 104 ARM: mvebu: Add proper pin muxing on Netgear ReadyNAS 102 ARM: mvebu: Add proper pin muxing on the Armada 370 DB board ARM: mvebu: Add proper pin muxing on Globalscale Mirabox board ARM: mvebu: Add network pin mux configuration for the Armada 370 SoC ARM: mvebu: Add RTC support for Armada 375 Signed-off-by: Olof Johansson <olof@lixom.net>
2014-09-23Merge tag 'v3.18-rockchip-dts2-v2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Merge "second bunch of dts changes for 3.18" from Heiko Stubner: More peripheral support for Rockchip SoCs - dwc2 usb controllers - spi controllers - emmc controller * tag 'v3.18-rockchip-dts2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: Remove "regulator-always-on" in vcc_rmii for Radxa Rock ARM: dts: rockchip: fix rk3188 emmc pull references ARM: dts: rockchip: fix swapped Radxa Rock pinctrl references ARM: dts: rockchip: clean up rk3xxx mmc nodes ARM: dts: rockchip: add emmc nodes for rk3066 and rk3188 ARM: dts: rockchip: add Cortex-A9 SPI controller nodes ARM: dts: rockchip: enable usb ports on Radxa Rock ARM: dts: rockchip: add dwc2 controllers for rk3066 and rk3188 ARM: dts: rockchip: remove rockchip,bus-index from rk3xxx i2c0 ARM: dts: Switch i2c0 to 400kHz on rk3288-evb-rk808 ARM: dts: Add rk808 PMIC to rk3288-evb-rk808 ARM: dts: Add mshc aliases for rk3288 ARM: dts: Add SPI nodes to rk3288 ARM: dts: Enable USB host1(dwc) on rk3288-evb ARM: dts: add rk3288 dwc2 controller support ARM: dts: Add sdio0 and sdio1 to the rk3288 Signed-off-by: Olof Johansson <olof@lixom.net>
2014-09-23Merge tag 'qcom-dt-for-3.18-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into next/dt Merge "qcom DT changes for v3.18-2" from Kumar Gala: Qualcomm ARM Based Device Tree Updates for v3.18-2 * Added SDCC nodes on MSM8960/CDP and MSM8660/SURF * Added I2C and SDCC4/WLAN on APQ8064/IFC6410 * Added I2C on MSM8984/DB8074 * tag 'qcom-dt-for-3.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom: ARM: DT: msm8960: Add sdcc nodes ARM: DT: msm8660: Add sdcc nodes ARM: DT: apq8064: Add i2c device nodes ARM: DT: apq8064: add support to sdcc4 for wlan. ARM: dts: qcom: Add I2C dt node for MSM8974 and DB8074 board Signed-off-by: Olof Johansson <olof@lixom.net>
2014-09-23Merge tag 'qcom-dt-for-3.18' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into next/dt Merge "qcom DT changes for v3.18" from Kumar Gala: Qualcomm ARM Based Device Tree Updates for v3.18 * Added APQ8084 dt support for clocks, serial, pinctrl, and IFC6540 board * Added IPQ8064 dt support for basic SoC and AP148 board * Added APQ8064 dt support for pinctrl, reset, SDHC, and multimedia clocks * Added PMIC 8058 dt support on MSM8660, enables PMIC based power key, keypad, rtc, and vibrator * Added PMIC 8921 dt support on MSM8960, enables PMIC based power key, keypad, and rtc * tag 'qcom-dt-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom: ARM: DT: QCOM: apq8064: Add dma support for sdcc node ARM: DT: apq8064: Add sdcc support via mcci driver. ARM: dts: qcom: Add 8064 multimedia clock controller node ARM: DT: APQ8064: Add node for ps_hold function in pinctrl ARM: DT: APQ8064: Add pinctrl support ARM: dts: qcom: Add TLMM DT node for APQ8084 ARM: dts: qcom: Add initial IFC6540 board device tree ARM: dts: msm: Add 8058 PMIC to ssbi bus ARM: dts: msm: Add 8921 PMIC to ssbi bus ARM: qcom: Add initial IPQ8064 SoC and AP148 device trees ARM: dts: qcom: Add APQ8084 serial port DT node ARM: dts: qcom: Add APQ8084 Global Clock Controller DT node Signed-off-by: Olof Johansson <olof@lixom.net>
2014-09-23Merge tag 'dt-for-v3.18' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Merge "omap dts changes for v3.18 merge window" from Tony Lindgren: Changes for .dts files for omaps for v3.18 merge window: - Updates for gta04 to add gta04a3 model - Add support for Tehnexion TAO3530 boards - Regulator names for beaglebone - Pinctrl related updates for omap5, dra7 and am437 - Model name fix for sbc-t54 - Enable mailbox for various omaps * tag 'dt-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (291 commits) ARM: dts: OMAP2+: Add sub mailboxes device node information ARM: dts: dra7-evm: Mark uart1 rxd as wakeup capable ARM: dts: OMAP5 / DRA7: switch over to interrupts-extended property for UART ARM: dts: AM437x: switch to compatible pinctrl ARM: dts: DRA7: switch to compatible pinctrl ARM: dts: OMAP5: switch to compatible pinctrl ARM: dts: am335x-boneblack: Add names for remaining regulators ARM: dts: sbc-t54: fix model property ARM: dts: omap5.dtsi: add DSS RFBI node ARM: dts: omap3: Add HEAD acoustics omap3-ha.dts and omap3-ha-lcd.dts (TAO3530 based) ARM: dts: omap3: Add Technexion Thunder support (TAO3530 SOM based) ARM: dts: omap3: Add Technexion TAO3530 SOM omap3-tao3530.dtsi ARM: OMAP2+: tao3530: Add pdata-quirk for the mmc2 internal clock ARM: OMAP2+: board-generic: add support for AM57xx family ARM: dts: dra72-evm: Add tps65917 PMIC node ARM: dts: dra72-evm: Enable I2C1 node Linux 3.17-rc3 unicore32: Fix build error vexpress/spc: fix a build warning on array bounds spi: sh-msiof: Fix transmit-only DMA transfers ... Signed-off-by: Olof Johansson <olof@lixom.net>
2014-09-22ARM: DT: msm8960: Add sdcc nodesStephen Boyd
Add the sdcc nodes to support the SD card controller using pl180 mmci driver. We also add a temporary fixed regulator until the regulator driver is mainlined. Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kumar Gala <galak@codeaurora.org>
2014-09-22ARM: DT: msm8660: Add sdcc nodesStephen Boyd
Add the sdcc nodes to support the SD card controller using pl180 mmci driver. We also add a temporary fixed regulator until the regulator driver is mainlined. Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kumar Gala <galak@codeaurora.org>
2014-09-22ARM: dts: rockchip: Remove "regulator-always-on" in vcc_rmii for Radxa RockRomain Perier
On Rockchip RK3188 SoCs the platform driver emac_rockchip is used. This variant driver enables this regulator when the device driver is loaded. The phy no longer needs to be always on. Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-09-18ARM: at91/dt: at91sam9m10g45ek add rtc nodeErik van Luijk
Add rtc node to both the at91sam9g45 SoC family and the at91sam9m10g45ek board. Signed-off-by: Erik van Luijk <evanluijk@interact.nl> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-18ARM: at91/dt: sama5d3: use new pinctrl compatible stringMarek Roszko
This switches the SAMA5D3 to use the new atmel,sama5d3-pinctrl id that was added with the drive strength options patch. Signed-off-by: Marek Roszko <mark.roszko@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> [nicolas.ferre@atmel.com: second compatible string kept as at91sam9x5] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-18ARM: at91/dt: sama5d3: add the nfc clockAlexandre Belloni
The atmel_nand driver is now able to handle the nfc clock, add it to sama5d3. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-18ARM: at91/dt: declare sckc node on at91sam9g45Boris BREZILLON
Declare the SCKC (Slow Clock Configuration) block and its clks. Make use of the clk32k clk instead of slow_osc where appropriate. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-18ARM: at91/dt: Fix typo regarding can0_clkDavid Dueck
Otherwise the clock for can0 will never get enabled. Signed-off-by: David Dueck <davidcdueck@googlemail.com> Signed-off-by: Anthony Harivel <anthony.harivel@emtrion.de> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: stable@vger.kernel.org # v3.14 Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-18ARM: at91/dt: at91sam9g20: switch ssc compatible stringBo Shen
As the SSC integrate in at91sam9g20 support frame sync length extension, so switch compatible string to support this feature. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-18ARM: at91/dt: at91sam9rl: switch ssc compatible stringBo Shen
As the SSC integrate in at91sam9rl support frame sync length extension, so switch compatible string to support this feature. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-18ARM: at91: sama5d3xek: reserve dma channel for audioBo Shen
We set the DMA configuration on USARTs in the SoC DT in (ARM: at91: sama5d3: add usart dma configurations). As the audio must work with DMA channels, we reserve some dma channels for audio, or else audio won't work. Signed-off-by: Bo Shen <voice.shen@atmel.com> [nicolas.ferre@atmel.com: move to the sama5d3xmb.dtsi to cover all board variants] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-17ARM: DT: apq8064: Add i2c device nodeskiran.padwal@smartplayin.com
This patch adds i2c pinctrl DT node for IFC6410 board. It also adds necessary DT support for i2c eeprom which is present on IFC6410. Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com> Signed-off-by: Kumar Gala <galak@codeaurora.org>
2014-09-17ARM: DT: apq8064: add support to sdcc4 for wlan.Srinivas Kandagatla
This patch adds sdcc4 node to enable wlan support on IFC6410 Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Kumar Gala <galak@codeaurora.org>
2014-09-17ARM: dts: qcom: Add I2C dt node for MSM8974 and DB8074 boardkiran.padwal@smartplayin.com
Add support for i2c controller on the DB8074 board. It also adds necessary DT support for i2c eeprom which is present on DB8074 board. Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com> Signed-off-by: Kumar Gala <galak@codeaurora.org>
2014-09-16ARM: dts: rockchip: fix rk3188 emmc pull referencesHeiko Stuebner
Fix a copy'n'paste error making the rk3188 emmc pinctrl nodes reference the pcfg_pull_default setting that is not available on rk3188. Reported-by: Naoki FUKAUMI <naobsd@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-09-16ARM: dts: rockchip: fix swapped Radxa Rock pinctrl referencesHeiko Stuebner
The host and otg regulator pinctrl settings got swapped, making the host reference the otg pinctrl and the other way round. The actual pins are correct (gpio0-3 for host and gpio2-31 for otg). Reported-by: Naoki FUKAUMI <naobsd@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-09-16ARM: zynq: Add ISL9305 regulator on Parallella boardMark Brown
There is an ISL9305 regulator on the Parallella board, add it to the DT along with descriptions of all the supplies. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-09-16ARM: zynq: DT: Add Ethernet physSoren Brinkmann
Add missing Ethernet phys to Zynq DTs. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-09-16ARM: dts: imx6: make gpt per clock can be from OSCAnson Huang
Original gpt per clk parent is from ipg_per clk which may be scaled when system enter low bus mode, as ipg clk will be lower in low bus mode, to keep system clk NOT drift, select gpt per clk parent from OSC which is at fixed freq always. On i.mx6qdl, add a osc_per clk source for i.mx6q TO > 1.0 and all i.MX6dl SoC. On i.mx6sx, just make gpt per clk from OSC. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-09-16ARM: dts: imx: ventana: add canbus support for GW52xxTim Harvey
The GW52xx baseboard supports CANbus so we enable it, configure its pinmux and CAN_STBY gpio. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-09-16ARM: dts: imx: ventana: cleanup pinctrl groupsTim Harvey
Follow the conventions for pinctrl: - grouping pinctrl in logical alphabatized groups - remove any pinctrl not being used by a driver or needed by user - move iomuxc to bottom of file for readability Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-09-16ARM: dts: imx: ventana: configure padconf for all pinsTim Harvey
Follow the convention of configuring padconf for all pins and not leaving any 0x80000000 to leave them un-configured. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-09-16ARM: dts: imx: ventana: use gpio constantsTim Harvey
Use the gpio contants defined in bindings for active high/low Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-09-16ARM: dts: imx: ventana: remove unused aliasesTim Harvey
Remove aliases that are either not used by bootloader or are provided via included dtsi files. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-09-16ARM: dts: imx: ventana: remove unsupported dt nodesTim Harvey
The general device-tree rule is to not include nodes that do not have a driver or bindings in a dts/dtsi. Remove the place-holder nodes from the Gateworks Ventana boards until a time that a driver with proper bindings exists. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-09-16ARM: dts: imx28-tx28: add alias for CAN XCVR regulatorLothar Waßmann
This alias is used by U-Boot to enable/disable the regulator depending on baseboard type. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-09-16ARM: dts: imx28-tx28: add spi-gpio as alternative for spi-mxsLothar Waßmann
The spi-mxs driver does not allow full duplex SPI transfers. The spi-gpio driver may be used as an alternative if this is required. Make the choice between those drivers easier for the end user by providing settings for both drivers. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-09-16ARM: dts: imx28-tx28: use GPIO flagsLothar Waßmann
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-09-16ARM: dts: imx28-tx28: remove spidev labels and add third instance of spidevLothar Waßmann
The labels on the spidev nodes are not used and not required, so remove them. The TX28 supports 3 chipselects on the SPI interface. Make all those chipselects available to the user. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-09-16ARM: dts: imx6sl: add baud clock and clock-names for ssiShengjiu Wang
Baud clock is used for bit clock generation in master mode. Ipg clock is peripheral clock and peripheral access clock. Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-09-16ARM: dts: imx6qdl: add baud clock and clock-names for ssiShengjiu Wang
Baud clock is used for bit clock generation in master mode. Ipg clock is peripheral clock and peripheral access clock. Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-09-16ARM: dts: imx6qdl-sabresd: Configure the pins locallyFabio Estevam
Passing '0x80000000' to the pin configuration means that kernel will skip the IOMUXC_SW_PAD_CTL configuration and will use whathever values come from the bootloader. Instead of relying on the bootloader setup, let's configure it in the kernel to have predictable settings. '0x1b0b0' is the default POR value for all these pins and has also been verified that the pins are using this value by manually inspecting the IOMUXC_SW_PAD_CTL registers, so no functional change has been made. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-09-16ARM: dts: imx28-m28evk: Fix display duplicate name warningFabio Estevam
The lcdif node has a property named "display" and also a child node called "display", which causes the following warning: device-tree: Duplicate name in lcdif@80030000, renamed to "display#1" Rename the child node name in order to avoid the warning. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-09-16ARM: dts: imx28-tx28: Fix display duplicate name warningFabio Estevam
The lcdif node has a property named "display" and also a child node called "display", which causes the following warning: device-tree: Duplicate name in lcdif@80030000, renamed to "display#1" Rename the child node name in order to avoid the warning. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-09-16ARM: dts: imx28-m28cu: Fix display duplicate name warningFabio Estevam
The lcdif node has a property named "display" and also a child node called "display", which causes the following warning: device-tree: Duplicate name in lcdif@80030000, renamed to "display#1" Rename the child node name in order to avoid the warning. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-31 14:19:29 +0000