summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-10-01blk-mq: fix racy updates of rq->errorsChristoph Hellwig
blk_mq_complete_request may be a no-op if the request has already been completed by others means (e.g. a timeout or cancellation), but currently drivers have to set rq->errors before calling blk_mq_complete_request, which might leave us with the wrong error value. Add an error parameter to blk_mq_complete_request so that we can defer setting rq->errors until we known we won the race to complete the request. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-01MIPS: Fix the build on jz4740 after removing the custom gpio.hAlban Bedel
Somehow the wrong version of the patch to remove the use of custom gpio.h on mips has been merged. This patch add the missing fixes for a build error on jz4740 because linux/gpio.h doesn't provide any machine specfics definitions anymore. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11089/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-01Merge remote-tracking branch 'tglx/x86/urgent' into x86/urgentIngo Molnar
Pick up the WCHAN fixes from Thomas. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-01drm/exynos: Staticize local function in exynos_drm_gem.cKrzysztof Kozlowski
The exynos_drm_gem_mmap_buffer() is not used outside so make it static. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-10-01drm/exynos: fimd: actually disable dp clockGustavo Padovan
fimd_dp_clock_enable() was setting the always to enabled, this patch fix this to actually use the value that is set to 'val'. Reported-by: Emilio López <emilio.lopez@collabora.co.uk> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-10-01drm/exynos: dp: remove suspend/resume functionsInki Dae
This patch removes unnecessary pm suspend/resume functions. All kms sub drivers will be controlled by top of Exynos drm driver and connector dpms so these sub drivers shouldn't have their own pm interfaces. Signed-off-by: Inki Dae <inki.dae@samsung.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2015-10-01drm/qxl: recreate the primary surface when the bo is not primaryFabiano Fidêncio
When disabling/enabling a crtc the primary area must be updated independently of which crtc has been disabled/enabled. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1264735 Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-10-01dmaengine: pxa_dma: fix residue corner caseRobert Jarzmik
A very tiny temporal window exists in the residue calculation where : - upon entering residue calculation, the transfer is ongoing - when reading the current transfer pointer, it just changed to the "finisher/linker" descriptor In this case, the residue returned is the whole transfer length instead of 0. Fix it. This appears almost in one extreme case, where the driver is used by older clients which inquire for residue in interrupt context, such as the smsc91x ethernet driver, in a tight loop : interrupt_handler() dmaengine_submit() do { dmaengine_tx_status() } while (residue > 0 || status != DMA_ERROR) Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-10-01dmaengine: pxa_dma: fix the no-requestor caseRobert Jarzmik
A very small number of devices don't use the flow control offered by requestor lines. In these specific cases, the pxa dma driver should be aware of that and not try to use a requestor line. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-10-01dmaengine: zxdma: Fix off-by-one for testing valid pchan requestAxel Lin
The valid pchan range is 0 ~ d->dma_requests - 1. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-10-01dmaengine: at_xdmac: clean used descriptorLudovic Desroches
When putting back a descriptor to the free descs list, some fields are not set to 0, it can cause bugs if someone uses it without having this in mind. Descriptor are not put back one by one so it is easier to clean descriptors when we request them. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: stable@vger.kernel.org #4.2 Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-10-01dmaengine: at_xdmac: change block increment addressing modeMaxime Ripard
The addressing mode we were using was not only incrementing the address at each microblock, but also at each data boundary, which was severely slowing the transfer, without any benefit since we were not using the data stride. Switch to the micro block increment only in order to get back to an acceptable performance level. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Fixes: 6007ccb57744 ("dmaengine: xdmac: Add interleaved transfer support") Cc: stable@vger.kernel.org #4.2 Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-09-30x86/process: Unify 32bit and 64bit implementations of get_wchan()Thomas Gleixner
The stack layout and the functionality is identical. Use the 64bit version for all of x86. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@alien8.de> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Kostya Serebryany <kcc@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: kasan-dev <kasan-dev@googlegroups.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Wolfram Gloger <wmglo@dent.med.uni-muenchen.de> Link: http://lkml.kernel.org/r/20150930083302.779694618@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-30x86/process: Add proper bound checks in 64bit get_wchan()Thomas Gleixner
Dmitry Vyukov reported the following using trinity and the memory error detector AddressSanitizer (https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernel). [ 124.575597] ERROR: AddressSanitizer: heap-buffer-overflow on address ffff88002e280000 [ 124.576801] ffff88002e280000 is located 131938492886538 bytes to the left of 28857600-byte region [ffffffff81282e0a, ffffffff82e0830a) [ 124.578633] Accessed by thread T10915: [ 124.579295] inlined in describe_heap_address ./arch/x86/mm/asan/report.c:164 [ 124.579295] #0 ffffffff810dd277 in asan_report_error ./arch/x86/mm/asan/report.c:278 [ 124.580137] #1 ffffffff810dc6a0 in asan_check_region ./arch/x86/mm/asan/asan.c:37 [ 124.581050] #2 ffffffff810dd423 in __tsan_read8 ??:0 [ 124.581893] #3 ffffffff8107c093 in get_wchan ./arch/x86/kernel/process_64.c:444 The address checks in the 64bit implementation of get_wchan() are wrong in several ways: - The lower bound of the stack is not the start of the stack page. It's the start of the stack page plus sizeof (struct thread_info) - The upper bound must be: top_of_stack - TOP_OF_KERNEL_STACK_PADDING - 2 * sizeof(unsigned long). The 2 * sizeof(unsigned long) is required because the stack pointer points at the frame pointer. The layout on the stack is: ... IP FP ... IP FP. So we need to make sure that both IP and FP are in the bounds. Fix the bound checks and get rid of the mix of numeric constants, u64 and unsigned long. Making all unsigned long allows us to use the same function for 32bit as well. Use READ_ONCE() when accessing the stack. This does not prevent a concurrent wakeup of the task and the stack changing, but at least it avoids TOCTOU. Also check task state at the end of the loop. Again that does not prevent concurrent changes, but it avoids walking for nothing. Add proper comments while at it. Reported-by: Dmitry Vyukov <dvyukov@google.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Based-on-patch-from: Wolfram Gloger <wmglo@dent.med.uni-muenchen.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@alien8.de> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Kostya Serebryany <kcc@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: kasan-dev <kasan-dev@googlegroups.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Wolfram Gloger <wmglo@dent.med.uni-muenchen.de> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20150930083302.694788319@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-30Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds
Pull watchdog fixes from Wim Van Sebroeck: "This fixes: - module autoload for 3 OF platform drivers - poweroff behaviour on bcm2835 watchdog device - I2C dependencies for iTCO_wdt.c" * git://www.linux-watchdog.org/linux-watchdog: watchdog: iTCO: Fix dependencies on I2C watchdog: bcm2835: Fix poweroff behaviour watchdog: Fix module autoload for OF platform driver
2015-09-30Merge tag 'hwmon-for-linus-v4.3-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmin fixes from Guenter Roeck: "Fix module autoload for various drivers" * tag 'hwmon-for-linus-v4.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (pwm-fan) Fix module autoload for OF platform driver hwmon: (gpio-fan) Fix module autoload for OF platform driver hwmon: (abx500) Fix module autoload for OF platform driver
2015-09-30Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU fixes from Ingo Molnar: "Two RCU fixes: - work around bug with recent GCC versions. - fix false positive lockdep splat" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rcu: Suppress lockdep false positive for rcp->exp_funnel_mutex rcu: Change _wait_rcu_gp() to work around GCC bug 67055
2015-09-30Initialize msg/shm IPC objects before doing ipc_addid()Linus Torvalds
As reported by Dmitry Vyukov, we really shouldn't do ipc_addid() before having initialized the IPC object state. Yes, we initialize the IPC object in a locked state, but with all the lockless RCU lookup work, that IPC object lock no longer means that the state cannot be seen. We already did this for the IPC semaphore code (see commit e8577d1f0329: "ipc/sem.c: fully initialize sem_array before making it visible") but we clearly forgot about msg and shm. Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-30drm/amdgpu: only print meaningful VM faultsChristian König
Port of radeon commit 9b7d786b900baf7c0d1a7e211570aef1cb27590f. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2015-09-30drm/amdgpu/cgs: remove import_gpu_memAlex Deucher
It was added for completeness, but we don't have any users for it yet. Daniel noted that it may be racy. Remove it. Change-Id: I5f5546f8911a4f294008a62dc86a73f3face38d1 Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-09-30MIPS: CPS: #ifdef on CONFIG_MIPS_MT_SMP rather than CONFIG_MIPS_MTPaul Burton
The CONFIG_MIPS_MT symbol can be selected by CONFIG_MIPS_VPE_LOADER in addition to CONFIG_MIPS_MT_SMP. We only want MT code in the CPS SMP boot vector if we're using MT for SMP. Thus switch the config symbol we ifdef against to CONFIG_MIPS_MT_SMP. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: <stable@vger.kernel.org> # 3.16+ Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10867/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-30MIPS: CPS: Don't include MT code in non-MT kernels.Paul Burton
The MT-specific code in mips_cps_boot_vpes can safely be omitted from kernels which don't support MT, with the default VPE==0 case being used as it would be after the has_mt (Config3.MT) check failed at runtime. Discarding the code entirely will save us a few bytes & allow cleaner handling of MT ASE instructions by later patches. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: <stable@vger.kernel.org> # 3.16+ Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10866/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-30MIPS: CPS: Stop dangling delay slot from has_mt.Paul Burton
The has_mt macro ended with a branch, leaving its callers with a delay slot that would be executed if Config3.MT is not set. However it would not be executed if Config3 (or earlier Config registers) don't exist which makes it somewhat inconsistent at best. Fill the delay slot in the macro & fix the mips_cps_boot_vpes caller appropriately. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: <stable@vger.kernel.org> # 3.16+ Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10865/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-30MIPS: dma-default: Fix 32-bit fall back to GFP_DMAJames Hogan
If there is a DMA zone (usually 24bit = 16MB I believe), but no DMA32 zone, as is the case for some 32-bit kernels, then massage_gfp_flags() will cause DMA memory allocated for devices with a 32..63-bit coherent_dma_mask to fall back to using __GFP_DMA, even though there may only be 32-bits of physical address available anyway. Correct that case to compare against a mask the size of phys_addr_t instead of always using a 64-bit mask. Signed-off-by: James Hogan <james.hogan@imgtec.com> Fixes: a2e715a86c6d ("MIPS: DMA: Fix computation of DMA flags from device's coherent_dma_mask.") Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 2.6.36+ Patchwork: https://patchwork.linux-mips.org/patch/9610/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-30s390/vtime: correct scaled cputime of partially idle CPUsMartin Schwidefsky
The calculation for the SMT scaling factor for a hardware thread which has been partially idle needs to disregard the cycles spent by the other threads of the core while the thread is idle. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-09-30drm/i915: Call non-locking version of drm_kms_helper_poll_enable(), v2Egbert Eich
drm_kms_helper_poll_enable() is called from a context in intel_hpd_irq_storm_disable() where the the mode_config mutex is already locked. When this function was converted to lock this mutex in commit 8c4ccc4ab6f6 ("drm/probe-helper: Grab mode_config.mutex in poll_init/enable") a deadlock occurred. Call the newly implemented non-locking version of this function. Changes since v1: - use function name suffix '_locked' for the function that is to be called from a locked context. Signed-off-by: Egbert Eich <eich@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-09-30drm: Add a non-locking version of drm_kms_helper_poll_enable(), v2Egbert Eich
drm_kms_helper_poll_enable() was converted to lock the mode_config mutex in commit 8c4ccc4ab6f64e859d4ff8d7c02c2ed2e956e07f ("drm/probe-helper: Grab mode_config.mutex in poll_init/enable"). This disregarded the cases where this function is called from a context where this mutex is already locked. Add a non-locking version as well. Changes since v1: - use function name suffix '_locked' for the function that is to be called from a locked context. Signed-off-by: Egbert Eich <eich@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-09-30mmc: core: fix dead loop of mmc_retuneChaotian Jing
When get a CRC error, start the mmc_retune, it will issue CMD19/CMD21 to do tune, assume there were 10 clock phase need to try, phase 0 to phase 6 is ok, phase 7 to phase 9 is NG, we try it from 0 to 9, so the last CMD19/CMD21 will get CRC error, host->need_retune was set and cause mmc_retune was called, then dead loop of mmc_retune Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: bd11e8bd03ca ("mmc: core: Flag re-tuning is needed on CRC errors") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-09-30drm/vmwgfx: Fix a command submission hang regressionThomas Hellstrom
When we're out of command buffer space, we turn on the command buffer processed irq without re-checking for finished command buffers afterwards. This might lead to a missed irq and the command submission process waiting forever for space. Fix this by rerunning the command buffer submission handler whenever we're out of command space. This ensures both that we don't needlessly turn on the irq, and that if we decide to turn on the irq, we recheck for finished command buffers before going to sleep. Reported-and-tested-by: Bryan Li <ldexin@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2015-09-30MIPS: Wire up userfaultfd and membarrier syscalls.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-30dmaengine: dw: properly read DWC_PARAMS registerAndy Shevchenko
In case we have less than maximum allowed channels (8) and autoconfiguration is enabled the DWC_PARAMS read is wrong because it uses different arithmetic to what is needed for channel priority setup. Re-do the caclulations properly. This now works on AVR32 board well. Fixes: fed2574b3c9f (dw_dmac: introduce software emulation of LLP transfers) Cc: yitian.bu@tangramtek.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-09-30drm/exynos: remove unused mode_fixup() codeGustavo Padovan
CRTC's mode_fixup() isn't used anymore in exynos, remove it. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30drm/exynos: remove decon_mode_fixup()Gustavo Padovan
The only thing mode_fixup was doing was set the adjusted_mode->vrefresh to 60, but it already has the value of 60 when the decon_mode_fixup() is called. That means this call is actually pointless and can be removed. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30drm/exynos: remove fimd_mode_fixup()Gustavo Padovan
The only thing mode_fixup was doing was set the adjusted_mode->vrefresh to 60, but it already has the value of 60 when the fimd_mode_fixup() is called. That means this call is actually pointless and can be removed. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30dmaengine: xgene-dma: Fix overwritting DMA tx ringRameshwar Prasad Sahu
This patch fixes an over flow issue with the TX ring descriptor. Each descriptor is 32B in size and an operation requires 2 of these descriptors. Signed-off-by: Rameshwar Prasad Sahu <rsahu@apm.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-09-30dmaengine: fix balance of privatecntPeter Ujfalusi
dma_release_channel() decrements privatecnt counter and almost all dma_get* function increments it with the exception of dma_get_slave_channel(). In most cases this does not cause issue since normally the channel is not requested and released, but if a driver requests DMA channel via dma_get_slave_channel() and releases the channel the privatecnt will be unbalanced and this will prevent for example getting channel for memcpy. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-09-30drm/exynos: rotator: Clock control is unused if !PMThierry Reding
Protect the rotator_clk_crtl() function with an #ifdef CONFIG_PM guard to avoid "defined but not used" warnings. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30drm/exynos: fimc: Clock control is unused if !PMThierry Reding
Protect the fimc_clk_ctrl() function with an #ifdef CONFIG_PM guard to avoid "defined but not used" warnings. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30drm/exynos: Suspend/resume is unused if !PMThierry Reding
Protect the suspend and resume callbacks with an #ifdef CONFIG_PM_SLEEP guard to avoid "defined but not used" warnings. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30drm/exynos: create a fake mmap offset with gem creationJoonyoung Shim
Don't create a fake mmap offset in exynos_drm_gem_dumb_map_offset. If not, it will call drm_gem_create_mmap_offset whenever user requests DRM_IOCTL_MODE_MAP_DUMB ioctl. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30drm/exynos: remove call to drm_gem_free_mmap_offset()Joonyoung Shim
The drm_gem_object_release() function already performs this cleanup, so there is no reason to do it explicitly. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30drm/exynos: Remove useless EXPORT_SYMBOL_GPLsDaniel Kurtz
All the user of these functions are inside exynos-drm driver and you don't need to export the symbols for that case. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30drm/exynos: cleanup line feed in exynos_drm_gem_get_ioctlJoonyoung Shim
The beginning of statement in function is next line of a brace. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30drm/exynos: cleanup function calling written twiceJoonyoung Shim
By if statment, some function callings are written twice. It needs several line feed by indentation in if statment. Make to one function calling from outside if statment. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30drm/exynos: staticize exynos_drm_gem_init()Joonyoung Shim
The exynos_drm_gem_init() is used only in exynos_drm_gem.c file. Make it static and don't export it. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30drm/exynos: remove unnecessary NULL assignmentJoonyoung Shim
They will be freed right or was freed already, so NULL assignment is unnecessary. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30drm/exynos: fix missed calling of drm_prime_gem_destroy()Joonyoung Shim
When obj->import_attach is existed, code calling drm_prime_gem_destroy() was removed from commit 67e93c808b48 ("drm/exynos: stop copying sg table"), and it's a fault. The drm_prime_gem_destroy() is cleanup function which GEM drivers need to call when they use drm_gem_prime_import() to import dma-bufs, so exynos-drm driver using drm_gem_prime_import() needs calling drm_prime_gem_destroy(). Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30drm/exynos: fix layering violation of addressJoonyoung Shim
There is no guarantee that DMA addresses are the same as physical addresses, but dma_to_pfn() knows how to convert a dma_addr_t to a PFN which can then be converted to a struct page. Suggested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30x86, efi, kasan: Fix build failure on !KASAN && KMEMCHECK=y kernelsAndrey Ryabinin
With KMEMCHECK=y, KASAN=n we get this build failure: arch/x86/platform/efi/efi.c:673:3: error: implicit declaration of function ‘memcpy’ [-Werror=implicit-function-declaration] arch/x86/platform/efi/efi_64.c:139:2: error: implicit declaration of function ‘memcpy’ [-Werror=implicit-function-declaration] arch/x86/include/asm/desc.h:121:2: error: implicit declaration of function ‘memcpy’ [-Werror=implicit-function-declaration] Don't #undef memcpy if KASAN=n. Reported-by: Ingo Molnar <mingo@kernel.org> Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 769a8089c1fd ("x86, efi, kasan: #undef memset/memcpy/memmove per arch") Link: http://lkml.kernel.org/r/1443544814-20122-1-git-send-email-ryabinin.a.a@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-09-30Merge tag 'v4.3-rc3' into x86/urgent, before applying dependent fixIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-24 06:56:41 +0000