summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-11-17ath9k: Remove enabling btcoex from stomp type changeRajkumar Manoharan
This patch removes btcoex_enable from stomp type change and let it be called from callee functions that makes the code can be reusable for MCI changes. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-17PM / shmobile: Fix build of sh7372_pm_init() for CONFIG_PM unsetRafael J. Wysocki
Fix build regression introduced by commit 056879d2f244001b2888cdc8cf (ARM: mach-shmobile: sh7372 A3SP no_suspend_console fix) by moving the intialization of the A3SP domain to a separate function and providing an empty definition of it for CONFIG_PM unset. Reported-and-tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-11-17PM Sleep: Do not extend wakeup paths to devices with ignore_children setRafael J. Wysocki
Commit 4ca46ff3e0d8c234cb40ebb6457653b59584426c (PM / Sleep: Mark devices involved in wakeup signaling during suspend) introduced the power.wakeup_path field in struct dev_pm_info to mark devices whose children are enabled to wake up the system from sleep states, so that power domains containing the parents that provide their children with wakeup power and/or relay their wakeup signals are not turned off. Unfortunately, that introduced a PM regression on SH7372 whose power consumption in the system "memory sleep" state increased as a result of it, because it prevented the power domain containing the I2C controller from being turned off when some children of that controller were enabled to wake up the system, although the controller was not necessary for them to signal wakeup. To fix this issue use the observation that devices whose power.ignore_children flag is set for runtime PM should be treated analogously during system suspend. Namely, they shouldn't be included in wakeup paths going through their children. Since the SH7372 I2C controller's power.ignore_children flag is set, doing so will restore the previous behavior of that SOC. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-17Merge branch 'for-linville' of git://github.com/kvalo/ath6klJohn W. Linville
2011-11-17p54spi: Fix workqueue deadlockMichael Büsch
priv->work must not be synced while priv->mutex is locked, because the mutex is taken in the work handler. Move cancel_work_sync down to after the device shutdown code. This is safe, because the work handler checks fw_state and bails out early in case of a race. Signed-off-by: Michael Buesch <m@bues.ch> Cc: <stable@vger.kernel.org> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-17p54spi: Add missing spin_lock_initMichael Büsch
The tx_lock is not initialized properly. Add spin_lock_init(). Signed-off-by: Michael Buesch <m@bues.ch> Cc: <stable@vger.kernel.org> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-17rt2x00: Fix efuse EEPROM reading on PPC32.Gertjan van Wingerde
Fix __le32 to __le16 conversion of the first word of an 8-word block of EEPROM read via the efuse method. Reported-and-tested-by: Ingvar Hagelund <ingvar@redpill-linpro.com> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> CC: <stable@vger.kernel.org> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-17rt2x00: handle spurious pci interruptsStanislaw Gruszka
We have documented case of very bad performance issue on rt2800pci device, because it generate spurious interrupt, what cause irq line is disabled: https://bugzilla.redhat.com/show_bug.cgi?id=658451 We already address that problem in separate patch by returning IRQ_HANDLED from interrupt handler. We think similar fix is needed for other rt2x00 PCI devices, because users report performance problems on these devices too. Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-17rt2800pci: handle spurious interruptsStanislaw Gruszka
Some devices may generate spurious interrupts, we have to handle them otherwise interrupt line will be disabled with below message and driver will not work: [ 2052.114334] irq 17: nobody cared (try booting with the "irqpoll" option) [ 2052.114339] Pid: 0, comm: swapper Tainted: P 2.6.35.6-48.fc14.x86_64 #1 [ 2052.114341] Call Trace: [ 2052.114342] <IRQ> [<ffffffff810a6e2b>] __report_bad_irq.clone.1+0x3d/0x8b [ 2052.114349] [<ffffffff810a6f93>] note_interrupt+0x11a/0x17f [ 2052.114352] [<ffffffff810a7a73>] handle_fasteoi_irq+0xa8/0xce [ 2052.114355] [<ffffffff8100c2ea>] handle_irq+0x88/0x90 [ 2052.114357] [<ffffffff8146f034>] do_IRQ+0x5c/0xb4 [ 2052.114360] [<ffffffff81469593>] ret_from_intr+0x0/0x11 [ 2052.114361] <EOI> [<ffffffff8102b7f9>] ? native_safe_halt+0xb/0xd [ 2052.114366] [<ffffffff81010f03>] ? need_resched+0x23/0x2d [ 2052.114367] [<ffffffff8101102a>] default_idle+0x34/0x4f [ 2052.114370] [<ffffffff81008325>] cpu_idle+0xaa/0xcc [ 2052.114373] [<ffffffff81461f2a>] start_secondary+0x24d/0x28e [ 2052.114374] handlers: [ 2052.114375] [<ffffffff81332944>] (usb_hcd_irq+0x0/0x7c) [ 2052.114378] [<ffffffffa00697da>] (rt2800pci_interrupt+0x0/0x18d [rt2800pci]) [ 2052.114384] Disabling IRQ #17 Resolve: https://bugzilla.redhat.com/show_bug.cgi?id=658451 Reported-and-tested-by: Amir Hedayaty <hedayaty@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-17TTY: ldisc, wait for ldisc infinitely in hangupJiri Slaby
For /dev/console case, we do not kill all ldisc users. It's due to redirected_tty_write test in __tty_hangup. In that case there still might be a process waiting e.g. in n_tty_read for input. We wait for such processes to disappear. The problem is that we use a timeout. After this timeout, we continue closing the ldisc and start freeing tty resources. It obviously leads to crashes when the other process is woken. So to fix this, we wait infinitely before reiniting the ldisc. (The tiocsetd remains untouched -- times out after 5s.) This is nicely reproducible with this run from shell: exec 0<>/dev/console 1<>/dev/console 2<>/dev/console and stopping a getty like: systemctl stop serial-getty@ttyS0.service The crash proper may be produced only under load or with constified timing the same as for 92f6fa09b. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Dave Young <hidave.darkstar@gmail.com> Cc: Dave Jones <davej@redhat.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Dmitriy Matrosov <sgf.dma@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-17TTY: ldisc, move wait idle to callerJiri Slaby
It is the only place where reinit is called from. And we really need to wait for the old ldisc to go once. Actually this is the place where the waiting originally was (before removed and re-added later). This will make the fix in the following patch easier to implement. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Dave Young <hidave.darkstar@gmail.com> Cc: Dave Jones <davej@redhat.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Dmitriy Matrosov <sgf.dma@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-17TTY: ldisc, allow waiting for ldisc arbitrarily longJiri Slaby
To fix a nasty bug in ldisc hup vs. reinit we need to wait infinitely long for ldisc to be gone. So here we add a parameter to tty_ldisc_wait_idle to allow that. This is only a preparation for the real fix which is done in the following patches. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Dave Young <hidave.darkstar@gmail.com> Cc: Dave Jones <davej@redhat.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Dmitriy Matrosov <sgf.dma@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-17Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2011-11-17Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: include/net/bluetooth/bluetooth.h
2011-11-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] hpsa: Disable ASPM [SCSI] aacraid: controller hangs if kernel uses non-default ASPM policy [SCSI] mpt2sas: add missing allocation. [SCSI] Silencing 'killing requests for dead queue' [SCSI] fix WARNING: at drivers/scsi/scsi_lib.c:1704
2011-11-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Fix the connection selection of ADCs on Cirrus codecs ALSA: hda - Update URLs in document ALSA: hda - move eld->spk_alloc fixup to hdmi_update_eld() ALSA: hda - delayed ELD repoll ALSA: hda - fix ELD memory leak ALSA: hda/realtek: remove redundant semicolon ALSA: hda - pwr_nids cleanup for IDT codecs
2011-11-17ARM: wire up process_vm_writev and process_vm_readv syscallsRussell King
These two syscalls were introduced during the last merge window. Add the entries into the ARM call tables for them. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-17ASoC: wm8753: Skip noop reconfiguration of DAI modeTimo Juhani Lindfors
This patch makes it possible to set DAI mode to its currently applied value even if codec is active. This is necessary to allow aplay -t raw -r 44100 -f S16_LE -c 2 < /dev/urandom & alsactl store -f backup.state alsactl restore -f backup.state to work without returning errors. This patch is based on a patch sent by Klaus Kurzmann <mok@fluxnetz.de>. Signed-off-by: Timo Juhani Lindfors <timo.lindfors@iki.fi> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2011-11-17genirq: Don't allow per cpu interrupts to be suspendedMarc Zyngier
The power management functions related to interrupts do not know (yet) about per-cpu interrupts and end up calling the wrong low-level methods to enable/disable interrupts. This leads to all kind of interesting issues (action taken on one CPU only, updating a refcount which is not used otherwise...). The workaround for the time being is simply to flag these interrupts with IRQF_NO_SUSPEND. At least on ARM, these interrupts are actually dealt with at the architecture level. Reported-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1321446459-31409-1-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-11-17ARM: perf: initialise used_mask for fake PMU during validationWill Deacon
When validating an event group, we call pmu->get_event_idx for each group member in order to check that the group can be scheduled as a unit on an empty PMU. As a result of 3fc2c830 ("ARM: perf: remove event limit from pmu_hw_events"), the used_mask member of struct cpu_hw_events must be setup explicitly, something which we don't do for the fake cpu_hw_events used for validation. This patch sets up an empty used_mask for the fake validation cpu_hw_events, preventing NULL deferences when trying to get the event index. Reported-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-11-17Revert "KVM: PPC: Add support for explicit HIOR setting"Alexander Graf
This reverts commit a15bd354f083f20f257db450488db52ac27df439. It exceeded the padding on the SREGS struct, rendering the ABI backwards-incompatible. Conflicts: arch/powerpc/kvm/powerpc.c include/linux/kvm.h Signed-off-by: Avi Kivity <avi@redhat.com>
2011-11-17KVM: VMX: Check for automatic switch msr table overflowGleb Natapov
Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-11-17KVM: VMX: Add support for guest/host-only profilingGleb Natapov
Support guest/host-only profiling by switch perf msrs on a guest entry if needed. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-11-17KVM: VMX: add support for switching of PERF_GLOBAL_CTRLGleb Natapov
Some cpus have special support for switching PERF_GLOBAL_CTRL msr. Add logic to detect if such support exists and works properly and extend msr switching code to use it if available. Also extend number of generic msr switching entries to 8. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-11-17KVM: s390: announce SYNC_MMUChristian Borntraeger
KVM on s390 always had a sync mmu. Any mapping change in userspace mapping was always reflected immediately in the guest mapping. - In older code the guest mapping was just an offset - In newer code the last level page table is shared Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-11-17KVM: s390: Fix tprot lockingChristian Borntraeger
There is a potential host deadlock in the tprot intercept handling. We must not hold the mmap semaphore while resolving the guest address. If userspace is remapping, then the memory detection in the guest is broken anyway so we can safely separate the address translation from walking the vmas. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-11-17KVM: s390: handle SIGP sense running interceptsCornelia Huck
SIGP sense running may cause an intercept on higher level virtualization, so handle it by checking the CPUSTAT_RUNNING flag. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-11-17KVM: s390: Fix RUNNING flag misinterpretationCornelia Huck
CPUSTAT_RUNNING was implemented signifying that a vcpu is not stopped. This is not, however, what the architecture says: RUNNING should be set when the host is acting on the behalf of the guest operating system. CPUSTAT_RUNNING has been changed to be set in kvm_arch_vcpu_load() and to be unset in kvm_arch_vcpu_put(). For signifying stopped state of a vcpu, a host-controlled bit has been used and is set/unset basically on the reverse as the old CPUSTAT_RUNNING bit (including pushing it down into stop handling proper in handle_stop()). Cc: stable@kernel.org Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-11-17Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Fix irqfixup, irqpoll regression
2011-11-17fix typo/thinko in get_random_bytes()Luck, Tony
If there is an architecture-specific random number generator we use it to acquire randomness one "long" at a time. We should put these random words into consecutive words in the result buffer - not just overwrite the first word again and again. Signed-off-by: Tony Luck <tony.luck@intel.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-17writeback: remove vm_dirties and task->dirtiesWu Fengguang
They are not used any more. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-11-17writeback: hard throttle 1000+ dd on a slow USB stickWu Fengguang
The sleep based balance_dirty_pages() can pause at most MAX_PAUSE=200ms on every 1 4KB-page, which means it cannot throttle a task under 4KB/200ms=20KB/s. So when there are more than 512 dd writing to a 10MB/s USB stick, its bdi dirty pages could grow out of control. Even if we can increase MAX_PAUSE, the minimal (task_ratelimit = 1) means a limit of 4KB/s. They can eventually be safeguarded by the global limit check (nr_dirty < dirty_thresh). However if someone is also writing to an HDD at the same time, it'll get poor HDD write performance. We at least want to maintain good write performance for other devices when one device is attacked by some "massive parallel" workload, or suffers from slow write bandwidth, or somehow get stalled due to some error condition (eg. NFS server not responding). For a stalled device, we need to completely block its dirtiers, too, before its bdi dirty pages grow all the way up to the global limit and leave no space for the other functional devices. So change the loop exit condition to /* * Always enforce global dirty limit; also enforce bdi dirty limit * if the normal max_pause sleeps cannot keep things under control. */ if (nr_dirty < dirty_thresh && (bdi_dirty < bdi_thresh || bdi->dirty_ratelimit > 1)) break; which can be further simplified to if (task_ratelimit) break; Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-11-17platform/x86: fix dell-laptop function prototypesRandy Dunlap
Fix build warnings: drivers/platform/x86/dell-laptop.c:592:13: warning: function declaration isn't a prototype drivers/platform/x86/dell-laptop.c:599:13: warning: function declaration isn't a prototype Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-17media/staging: fix allyesconfig build errorRandy Dunlap
Fix x86 allyesconfig builds. Builds fail due to a non-static variable named 'debug' in drivers/staging/media/as102: arch/x86/built-in.o:arch/x86/kernel/entry_32.S:1296: first defined here ld: Warning: size of symbol `debug' changed from 90 in arch/x86/built-in.o to 4 in drivers/built-in.o Thou shalt have no non-static identifiers that are named 'debug'. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Pierrick Hascoet <pierrick.hascoet@abilis.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-17ARM: imx6q: move clock register map to machine_desc.map_ioRichard Zhao
map_io is the only place to call iotable_init. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> [shawn.guo: rename imx_clock_map_io() to imx6q_clock_map_io()] Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-11-17hwmon: (exynos4_tmu) Fix Kconfig dependencyDonggeun Kim
Rename dependency of EXYNOS4_TMU in Kconfig to the existing one. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-11-17ocfs2: Use filemap_write_and_wait() instead of write_inode_now()Jan Kara
Since ocfs2 has no ->write_inode method, there's no point in calling write_inode_now() from ocfs2_cleanup_delete_inode(). Use filemap_write_and_wait() instead. This helps us to cleanup inode writing interfaces... Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Joel Becker <jlbec@evilplan.org>
2011-11-17ocfs2: honor O_(D)SYNC flag in fallocateMark Fasheh
We need to sync the transaction which updates i_size if the file is marked as needing sync semantics. Signed-off-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: Joel Becker <jlbec@evilplan.org>
2011-11-17ocfs2: Add a missing journal credit in ocfs2_link_credits() -v2Xiaowei.Hu
With indexed_dir enabled, ocfs2 maintains a list of dirblocks having space. The credit calculation in ocfs2_link_credits() did not correctly account for adding an entry that exactly fills a dirblock that triggers removing that dirblock by changing the pointer in the previous block in the list. The credit calculation did not account for that previous block. To expose, do: mkfs.ocfs2 -b 512 -M local /dev/sdX mount /dev/sdX /ocfs2 mkdir /ocfs2/linkdir touch /ocfs2/linkdir/file1 for i in `seq 1 29` ; do link /ocfs2/linkdir/file1 /ocfs2/linkdir/linklinklinklinklinklink$i; done rm -f /ocfs2/linkdir/linklinklinklinklinklink10 sleep 8 link /ocfs2/linkdir/file1 /ocfs2/linkdir/linklinklinklinklinklinkaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa Note: The link names have been crafted for a 512 byte blocksize. Reproducing with a larger blocksize will require longer (or more) links. The sleep is important. We want jbd2 to commit the transaction so that the missing block does not piggy back on account of the previous transaction. Signed-off-by: XiaoweiHu <xiaowei.hu at oracle.com> Reviewed-by: WengangWang <wen.gang.wang at oracle.com> Reviewed-by: Sunil.Mushran <sunil.mushran at oracle.com> Signed-off-by: Joel Becker <jlbec@evilplan.org>
2011-11-17ocfs2: send correct UUID to cleancache initializationDan Magenheimer
ocfs2: Fix cleancache initialization call to correctly pass uuid As reported by Steven Whitehouse in https://lkml.org/lkml/2011/5/27/221 the ocfs2 volume UUID is incorrectly passed to cleancache. As a result, shared-ephemeral tmem pools will not actually be created; instead they will be private (unshared) which misses out on a major benefit of tmem. Reported-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Signed-off-by: Joel Becker <jlbec@evilplan.org>
2011-11-17ocfs2: Commit transactions in error cases -v2Wengang Wang
There are three cases found that in error cases, journal transactions are not committed nor aborted. We should take care of these case by committing the transactions. Otherwise, there would left a journal handle which will lead to , in same process context, the comming ocfs2_start_trans() gets wrong credits. Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Signed-off-by: Joel Becker <jlbec@evilplan.org>
2011-11-17ocfs2: make direntry invalid when deleting itWengang Wang
When we deleting a direntry from a directory, if it's the first in a block we invalid it by setting inode to 0; otherwise, we merge the deleted one to the prior and contiguous direntry. And we don't truncate directories. There is a problem for the later case since inode is not set to 0. This problem happens when the caller passes a file position as parameter to ocfs2_dir_foreach_blk(). If the position happens to point to a stale(not the first, deleted in betweens of ocfs2_dir_foreach_blk()s) direntry, we are not able to recognize its staleness. So that we treat it as a live one wrongly. The fix is to set inode to 0 in both cases indicating the direntry is stale. This won't introduce additional IOs. Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Signed-off-by: Joel Becker <jlbec@evilplan.org>
2011-11-17fs/ocfs2/dlm/dlmlock.c: free kmem_cache_zalloc'd data using kmem_cache_freeJulia Lawall
Memory allocated using kmem_cache_zalloc should be freed using kmem_cache_free, not kfree. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,e,e1,e2; @@ x = kmem_cache_zalloc(e1,e2) ... when != x = e ?-kfree(x) +kmem_cache_free(e1,x) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Joel Becker <jlbec@evilplan.org>
2011-11-17ipv6: Use pr_warn() in ip6_fib.cDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-17IPV6 Fix a crash when trying to replace non existing routeMatti Vaittinen
This patch fixes a crash when non existing IPv6 route is tried to be changed. When new destination node was inserted in middle of FIB6 tree, no relevant sanity checks were performed. Later route insertion might have been prevented due to invalid request, causing node with no rt info being left in tree. When this node was accessed, a crash occurred. Patch adds missing checks in fib6_add_1() Signed-off-by: Matti Vaittinen <Mazziesaccount@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-17stmmac: fix pm functions avoiding sleep on spinlockFrancesco Virlinzi
This patch fixes the pm functions to avoid the system sleeps while a spinlock is taken. Signed-off-by: Francesco Virlinzi <francesco.virlinzi@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-17stmmac: remove spin_lock in stmmac_ioctl.Srinivas Kandagatla
This patch removes un-needed spin_lock in stmmac_ioctl while reading and writing mdio registers. While holding spin_lock the code must be atomic, which is not true in this case as both mdiobus_read and writes have mutex locks. Without this patch reading mdio registers via mii-tool results in below BUG: mii-tool -vvv eth0" Using SIOCGMIIPHY=0x8947 BUG: sleeping function called from invalid context at kernel/mutex.c:287 in_atomic(): 1, irqs_disabled(): 0, pid: 614, name: mii-tool 2 locks held by mii-tool/614: #0: (rtnl_mutex){......}, at: [<c01fd80c>] dev_ioctl+0x550/0x674 #1: (&priv->lock){......}, at: [<c01b34ec>] stmmac_ioctl+0x4c/0x78 [<c002ea14>] (unwind_backtrace+0x0/0xcc) from [<c0272c38>] (mutex_lock_nested+0x24/0x35c) [<c0272c38>] (mutex_lock_nested+0x24/0x35c) from [<c01b237c>] (mdiobus_read+0x44/0x70) [<c01b237c>] (mdiobus_read+0x44/0x70) from [<c01b0c64>] (phy_mii_ioctl+0x4c/0x138) [<c01b0c64>] (phy_mii_ioctl+0x4c/0x138) from [<c01b34fc>] (stmmac_ioctl+0x5c/0x78) [<c01b34fc>] (stmmac_ioctl+0x5c/0x78) from [<c01fcec8>] (dev_ifsioc+0x2a4/0x2c8) [<c01fcec8>] (dev_ifsioc+0x2a4/0x2c8) from [<c01fd81c>] (dev_ioctl+0x560/0x674) [<c01fd81c>] (dev_ioctl+0x560/0x674) from [<c00c36e0>] (vfs_ioctl+0x2c/0x8c) [<c00c36e0>] (vfs_ioctl+0x2c/0x8c) from [<c00c4130>] (do_vfs_ioctl+0x530/0x578) [<c00c4130>] (do_vfs_ioctl+0x530/0x578) from [<c00c41ac>] (sys_ioctl+0x34/0x54) [<c00c41ac>] (sys_ioctl+0x34/0x54) from [<c0028aa0>] (ret_fast_syscall+0x0/0x2c) Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-17stmmac: parameters auto-tuning through HW cap regGiuseppe CAVALLARO
New GMAC devices (newer than the databook 3.50a) have the HW capability register that provides which features are actually supported by the hardware. On old devices many information have to be passed through the platform, for example: enhanced descriptor structure, TX COE etc. These are mandatory to properly configure the driver. This remains still valid because the driver has to support old Synopsys devices but now it's also able to override them using the values from the HW capability register if supported. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-17stmmac: fix advertising 1000Base capabilties for non GMII ifaceSrinivas Kandagatla
This patch fixes the way to stop the 1000Base advertising capabilties for non GMII interfaces. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-17stmmac: use mdelay on timeout of sw resetFrancesco Virlinzi
This patch uses an mdelay to manage the timeout on sw reset to be independant of cpu_clk. Signed-off-by: Francesco Virlinzi <francesco.virlinzi@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.46.0) at 2025-08-01 02:48:40 +0000