summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-06-05Merge remote-tracking branches 'asoc/topic/sta350', 'asoc/topic/tas2552', ↵Mark Brown
'asoc/topic/tas3a227e' and 'asoc/topic/tas571x' into asoc-next
2015-06-05Merge remote-tracking branches 'asoc/topic/simple', 'asoc/topic/ssm2518', ↵Mark Brown
'asoc/topic/ssm2602', 'asoc/topic/ssm4567' and 'asoc/topic/sta32x' into asoc-next
2015-06-05Merge remote-tracking branches 'asoc/topic/rt5677', 'asoc/topic/samsung' and ↵Mark Brown
'asoc/topic/sgtl5000' into asoc-next
2015-06-05Merge remote-tracking branches 'asoc/topic/max98095', 'asoc/topic/omap', ↵Mark Brown
'asoc/topic/pxa', 'asoc/topic/qcom' and 'asoc/topic/rcar' into asoc-next
2015-06-05Merge remote-tracking branches 'asoc/topic/gpiod-flags', ↵Mark Brown
'asoc/topic/gtm601', 'asoc/topic/intel', 'asoc/topic/lm3857' and 'asoc/topic/max98090' into asoc-next
2015-06-05Merge remote-tracking branches 'asoc/topic/fsl', 'asoc/topic/fsl-sai', ↵Mark Brown
'asoc/topic/fsl-spdif', 'asoc/topic/fsl-ssi' and 'asoc/topic/gpio-jack' into asoc-next
2015-06-05Merge remote-tracking branches 'asoc/topic/davinci' and 'asoc/topic/dpcm' ↵Mark Brown
into asoc-next
2015-06-05Merge remote-tracking branches 'asoc/topic/au1x', 'asoc/topic/bt-sco', ↵Mark Brown
'asoc/topic/cs35l32' and 'asoc/topic/da7210' into asoc-next
2015-06-05Merge remote-tracking branches 'asoc/topic/adau1977', 'asoc/topic/adav80x', ↵Mark Brown
'asoc/topic/arizona' and 'asoc/topic/atmel' into asoc-next
2015-06-05Merge remote-tracking branches 'asoc/topic/ac97', 'asoc/topic/ad1836', ↵Mark Brown
'asoc/topic/ada1977', 'asoc/topic/adau1701' and 'asoc/topic/adau17x1' into asoc-next
2015-06-05Merge remote-tracking branch 'asoc/topic/rt5645' into asoc-nextMark Brown
2015-06-05Merge remote-tracking branch 'asoc/topic/dma' into asoc-nextMark Brown
2015-06-05Merge remote-tracking branch 'asoc/topic/dapm' into asoc-nextMark Brown
2015-06-05Merge remote-tracking branch 'asoc/topic/core' into asoc-nextMark Brown
2015-06-05Merge remote-tracking branches 'asoc/fix/wm8737', 'asoc/fix/wm8903' and ↵Mark Brown
'asoc/fix/wm8955' into asoc-linus
2015-06-05Merge remote-tracking branches 'asoc/fix/arizona', 'asoc/fix/fmtbit', ↵Mark Brown
'asoc/fix/max98925', 'asoc/fix/rcar' and 'asoc/fix/ux500' into asoc-linus
2015-06-05Merge remote-tracking branch 'asoc/fix/rt5645' into asoc-linusMark Brown
2015-06-05ASoC: tas2552: Configure the WCLK frequency based on the streamPeter Ujfalusi
Instead of hard wiring the WCLK frequency at probe time do it runtime. The hard wired 88_96KHz was not even setting the correct bits since it was defined as (1 << 6) which will change the I2S_OUT_SEL bit and will leave the amplifier configured for 8KHz. At the same time clean up and fix the CFG3 register bits. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-05ASoC: tas2552: Add support for word length configurationPeter Ujfalusi
Configure the word length based on the params_width of the stream. Also configure the clock per frame value which is used when tas2552 is bus master. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-05ASoC: tas2552: Implement startup/stop sequence as per TRMPeter Ujfalusi
Certain sequence need to be followed in order to have smooth power up and power down performance. Execute this sequence via DAPM_POST widget. Remove patching the RESERVED_0D register at probe time since it has to be handled every time when we stop or start the amplifier. In order to be able to execute the sequence at the correct time, the driver need to request to ignore the pmdown time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-05ASoC: tas2552: Correct the Speaker Driver Playback Volume (PGA_GAIN)Peter Ujfalusi
The last parameter for DECLARE_TLV_DB_SCALE() is to tell if the gain will be muted or not when it is set to raw 0. IN this case it is not muted. The PGA_GAIN is in 0-4 bits in the register. Fix the offset in the SOC_SINGLE_TLV() for this. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-05ASoC: tas2552: Clean up the Digital - Analog DAPM route definitionPeter Ujfalusi
The strings should be: 'static const char * const tas2552_input_texts[]' SOC_DAPM_ENUM should have "Route" in place of xname and no need to have it as an array. Also align the parameters. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-05ASoC: tas2552: Add TDM supportPeter Ujfalusi
TDM support is achieved using DSP transfer mode and setting a programmable offset which specifies where data begins with respect to the frame sync. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-05ASoC: tas2552: Correct and clean up data format and BCLK/WCLK directionPeter Ujfalusi
Use names from the datasheet for the definitions. Correct the data format definitions since they were not correct. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-05ASoC: tas2552: Correct dai format supportPeter Ujfalusi
DSP_A mode require one bit delay from the FS, DSP_B is without data delay. When checking the requested format, also match the bit and fs inversion flag along with the format since it is not possible to change inversion. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-05ASoC: tas2552: Add support for pll and pdm source clock selectionPeter Ujfalusi
Instead of hard wiring the PLL_CLKIN and PDM_CLK to be sourced from BCLK add proper clock configuration via the set_dai_sysclk callback. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-05ASoC: tas2552: bindings header file for tas2552 codecPeter Ujfalusi
Binding header file for clock input selection and configuration. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-05ASoC: rt5645: Init jack_detect_work before registering irqNicolas Boichat
Prevents frequent panic on boot, if the irq handler rt5645_irq gets called before the workqueue rt5645_jack_detect_work is initialized. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2015-06-04ASoC: tas2552: Rename mclk parameter to pll_clkin to match with the datasheetPeter Ujfalusi
MCLK is one of the possible source for the pll_clkin frequency. Make this clear by renaming the variable. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-04ASoC: tas2552: Simplify and reverse the functionality of tas2552_sw_shutdownPeter Ujfalusi
The function name and parameters of: tas2552_sw_shutdown(struct tas2552_data *tas_data, int sw_shutdown) implies that if sw_shutdown is 1 we should be entering to the software shutdown mode. The code can be simplified as well within the function. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-04ASoC: tas2552: Simplify the tas2552_mute functionPeter Ujfalusi
Initialize the cfg1_reg to 0 and set the mute bit only when it is needed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-04ASoC: tas2552: Correct CFG1 register bit definitionsPeter Ujfalusi
Remove the _MASK postfix of the bit definitions, collect the CFG1 bit definition in one place and correct the bit shifts at the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-04ASoC: tas2552: Correct PDM configuration register bit definitionsPeter Ujfalusi
The PDM clock can be selected via bit0-1. PDM_DATA_ES bit is at bit2. The code were trying to select BCLK as PDM reference clock but instead it was selecting PLL and set the DATA_ES bit to 1. Selecting the PLL output as reference clock as default does make sense, but the driver should not change the PDM data edge. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-04ASoC: tas2552: Fix kernel crash caused by wrong kcontrol entryPeter Ujfalusi
SOC_DAPM_SINGLE("Playback AMP", ..) should not be under kcontrols. It causes kernel crash (NULL pointer) when the mixers are listed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2015-06-04ASoC: tas2552: Fix kernel crash when the codec is loaded but not part of a cardPeter Ujfalusi
If the card is not part of any card the tas_data->codec is NULL since it is set only during snd_soc_codec_driver.probe, which is not yet called. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2015-06-04ASoC: tas2552: Make the enable-gpio really optionalPeter Ujfalusi
Do not fail the probe if the enable-gpio is not specifiedbut handle deferred probe case. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-04ASoC: dapm: fix build errors for missing snd_soc_dapm_new_control symbolLiam Girdwood
Fix the following error:- All error/warnings (new ones prefixed by >>): > > sound/built-in.o: In function `soc_tplg_dapm_widget_create': > >> :(.text+0x25a90): undefined reference to `snd_soc_dapm_new_control' Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-02ASoC: core: If component doesn't have of_node use parent's node insteadJyri Sarha
If an ASoC component device does not have a device tree node, use its parent's node instead, when looking for a matching DAI based on a device tree reference. This allows video device drivers to register a separate child device for their ASoC side audio functionality. [And MFDs in general -- broonie] Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-02regulator: arizona-ldo1: Do not control DVFS clocking from regulatorRichard Fitzgerald
Using the driver for the internal regulator to also enable/disable the codec internal clock frequency controller is an unexpected side-effect for a regulator, and also means that the core clocks won't be changed as expected if an external regulator is used to power the codec. The DVFS is now handled by the codec driver so can be removed from the LDO1 driver. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-02ASoC: arizona: Add DVFS handling for sample rate controlRichard Fitzgerald
The WM8997 and WM5102 codecs need to boost DVFS for higher sample rates. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-02ASoC: wm_adsp: Move DVFS control into codec driverRichard Fitzgerald
In theory the ADSP driver should not need to know anything about the codec it is part of. But the WM5102 needs DVFS control based on ADSP clocking speed. This was being handled by bundling part of the knowledge of this into the ADSP driver. This change moves this handling out of the ADSP driver and into the WM5102 driver. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-02ASoC: arizona: Export functions to control subsystem DVFSRichard Fitzgerald
The WM5102 and WM8997 codecs have an internal dynamic clock booster. When this booster is active, the DCVDD voltage must be increased. If all the currently active audio paths can run with the root SYSCLK we can disable the booster, allowing us to turn down DCVDD voltage to save power. Previously this was being done by having the booster enable bit set as a side-effect of the LDO1 regulator driver, which is unexpected behaviour of a regulator and not compatible with using an external regulator. [Originally this was documented as a feature of the internal LDO -- broonie] This patch exports functions to handle the booster enable and DCVDD voltage, with each relevant subsystem flagging whether it can currently run without the booster. Note that these subsystems are stateless and none of them are nestable, so there's no need for reference counting, we only need a simple boolean for each subsystem of whether their current condition could require the booster or will allow us to turn the codec down to lower operating power. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-02Merge branch 'topic/adsp' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-arizona
2015-06-02ASoC: qcom: fix STORM board KconfigArnd Bergmann
This patch is a fixup to correct dependencies in patch 9bae4880acee ("ASoC: qcom: move ipq806x specific bits out of lpass driver.") Originally this change-set was suggested by Arnd on mailing list. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-02ASoC: Intel: Allocate for the mailbox with max sizeSubhransu S. Prusty
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-02ASoC: dapm: fix snd_soc_dapm_new_control() implicit declarationVladimir Zapolskiy
The change fixes the following compilation problem: sound/soc/soc-dapm.c: In function 'dapm_kcontrol_data_alloc': sound/soc/soc-dapm.c:388:4: error: implicit declaration of function 'snd_soc_dapm_new_control' [-Werror=implicit-function-declaration] data->widget = snd_soc_dapm_new_control(widget->dapm, ^ sound/soc/soc-dapm.c:387:17: warning: assignment makes pointer from integer without a cast [enabled by default] data->widget = snd_soc_dapm_new_control(widget->dapm, ^ sound/soc/soc-dapm.c: At top level: sound/soc/soc-dapm.c:3269:1: error: conflicting types for 'snd_soc_dapm_new_control' snd_soc_dapm_new_control(struct snd_soc_dapm_context *dapm, ^ In addition to the fix add static qualifier to snd_soc_dapm_new_control() function to silence checkpatch. Fixes: 02aa78abec ("ASoC: DAPM: Add APIs to create individual DAPM controls.") Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-02ASoC: ts3a227e: use device property apiFang, Yang A
replace of_property_read_u32 with device_property_read_u32 Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-02ASoC: max98090: read micbias from device propertyFang, Yang A
This patch reads max98090 micbias from acpi or dt Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-02ASoC: Intel: handle haswell pcm suspend including runtime modules freeingJie Yang
It needs free pcm runtime modules before unloading firmware, here add hsw_pcm_suspend() to handle this procedure: suspends firmware ==> frees runtime modules ==> unloads firmware. This fixes the broadwell module unload failed issue. Signed-off-by: Jie Yang <yang.jie@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-02ASoC: Intel: check and clear runtime module pointerJie Yang
Add check runtime module pointers before freeing them, and clear them to NULL after freed. With this implemented, we can avoid NULL pointer dereference or double free errors. Signed-off-by: Jie Yang <yang.jie@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-31 01:46:08 +0000