summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-09-24perf/x86/intel/uncore: Add Haswell-EP uncore supportYan, Zheng
The uncore subsystem in Haswell-EP is similar to Sandy/Ivy Bridge-EP. There are some differences in config register encoding and pci device IDs. The Haswell-EP uncore also supports a few new events. Add the Haswell-EP driver to the snbep split driver. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> [ Add missing break. Add imc events. Add cbox nc/isoc/c6. ] Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: eranian@google.com Link: http://lkml.kernel.org/r/1409872109-31645-2-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-09-24perf/x86/intel: Use Broadwell cache event list for HaswellAndi Kleen
Use the newly added Broadwell cache event list for Haswell too. All Haswell and Broadwell events and offcore masks used in these lists are identical. However Haswell is very different from the Sandy Bridge list that was used previously. That fixes a wide range of mis-counting cache events. The node events are now only for retired memory events, so prefetching and speculative memory accesses are not included. They are PEBS capable now, which makes it much easier to sample for them, plus it's possible to create address maps with -d. The prefetch events are gone now. They way the hardware counts them is very misleading (some prefetches included, others not), so it seemed best to leave them out. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: eranian@google.com Link: http://lkml.kernel.org/r/1409683455-29168-5-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-09-24perf/x86: Add INST_RETIRED.ALL workaroundsAndi Kleen
On Broadwell INST_RETIRED.ALL cannot be used with any period that doesn't have the lowest 6 bits cleared. And the period should not be smaller than 128. Add a new callback to enforce this, and set it for Broadwell. This is erratum BDM57 and BDM11. How does this handle the case when an app requests a specific period with some of the bottom bits set The apps thinks it is sampling at X occurences per sample, when it is in fact at X - 63 (worst case). Short answer: Any useful instruction sampling period needs to be 4-6 orders of magnitude larger than 128, as an PMI every 128 instructions would instantly overwhelm the system and be throttled. So the +-64 error from this is really small compared to the period, much smaller than normal system jitter. Long answer: <write up by Peter:> IFF we guarantee perf_event_attr::sample_period >= 128. Suppose we start out with sample_period=192; then we'll set period_left to 192, we'll end up with left = 128 (we truncate the lower bits). We get an interrupt, find that period_left = 64 (>0 so we return 0 and don't get an overflow handler), up that to 128. Then we trigger again, at n=256. Then we find period_left = -64 (<=0 so we return 1 and do get an overflow). We increment with sample_period so we get left = 128. We fire again, at n=384, period_left = 0 (<=0 so we return 1 and get an overflow). And on and on. So while the individual interrupts are 'wrong' we get then with interval=256,128 in exactly the right ratio to average out at 192. And this works for everything >=128. So the num_samples*fixed_period thing is still entirely correct +- 127, which is good enough I'd say, as you already have that error anyhow. So no need to 'fix' the tools, al we need to do is refuse to create INST_RETIRED:ALL events with sample_period < 128. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Cc: Mark Davies <junk@eslaf.co.uk> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1409683455-29168-4-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-09-24perf/x86/intel: Add Broadwell core supportAndi Kleen
Add Broadwell support for Broadwell Client to perf. This is very similar to Haswell. It uses a new cache event table, because there were various changes there. The constraint list has one new event that needs to be handled over Haswell. The PEBS event list is the same, so we reuse Haswell's. [fengguang.wu: make intel_bdw_event_constraints[] static] Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: eranian@google.com Link: http://lkml.kernel.org/r/1409683455-29168-3-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-09-24perf/x86/intel: Document all Haswell modelsAndi Kleen
Add names for each Haswell model as requested by Peter. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: eranian@google.com Link: http://lkml.kernel.org/r/1409683455-29168-2-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-09-24perf/x86/intel: Remove incorrect model number from Haswell perfAndi Kleen
71 is a Broadwell, not a Haswell. The model number was added by mistake earlier. Remove it for now, until it can be re-added later with real Broadwell support. In practice it does not cause a lot of issues because the Broadwell PMU is very similar to Haswell, but some details were wrong, and it's better to handle it correctly. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: eranian@google.com Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Link: http://lkml.kernel.org/r/1409683455-29168-1-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-09-24Revert "perf: Do not allow optimized switch for non-cloned events"Jiri Olsa
This reverts commit 1f9a7268c67f0290837aada443d28fd953ddca90. With the fix of the initial state for the cloned event we now correctly handle the error described in: 1f9a7268c67f perf: Do not allow optimized switch for non-cloned events so we can revert it. I made an automated test for this, but its not suitable for automated perf tests framework. It needs to be customized for each machine (the more cpu the higher numbers for GROUPS/WORKERS/BYTES) and it could take longer time to hit the issue. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Stephane Eranian <eranian@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140910143535.GD2409@krava.brq.redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-09-24perf: Fix child event initial state setupJiri Olsa
Currently we initialize the child event based on the original parent state. This is wrong, because the original parent event (and its state) is not related to current fork and also could be already gone. We need to initialize the child state based on the immediate parent event state. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Stephane Eranian <eranian@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1410520708-19275-2-git-send-email-jolsa@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-09-24perf: Do not POLLHUP event if it has childrenJiri Olsa
Currently we return POLLHUP in event polling if the monitored process is done, but we didn't consider possible children, that might be still running and producing data. Before returning POLLHUP making sure that: 1) the monitored task has exited and that 2) we don't have any children to monitor Also adding parent wakeup when the child event is gone. Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: http://lkml.kernel.org/r/1410520708-19275-1-git-send-email-jolsa@kernel.org Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-09-19Merge tag 'perf-core-for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: User visible changes: o Add +field argument support for --sort option (Jiri Olsa) o Do not access kallsyms when analyzing user binaries with 'probe' (Masami Hiramatsu) o Ignore stripped vmlinux and fallback to kallsyms (Anton Blanchard) o Add path to Ubuntu kernel debuginfo file (Anton Blanchard) o Disable kernel symbol demangling by default (Avi Kivity) Infrastructure changes: o More intel PT prep work, from Adrian Hunter, including: - Let a user specify a PMU event without any config terms - Add perf-with-kcore script - Let default config be defined for a PMU - Add perf_pmu__scan_file() o "perf kvm stat report" improvements by Alexander Yarygin: o Save pid string in opts.target.pid o Enable the target.system_wide flag o Unify the title bar output o Fix build issue on powerpc when DWARF support is disabled (Anton Blanchard) o Allow to specify lib compile variable for spec usage (Jiri Olsa) o Fix build on ARM (Stephane Eranian) o Fix build on powerpc when DWARF support is disabled (Anton Blanchard) o Don't include sys/poll.h directly (Arnaldo Carvalho de Melo) o Use ring buffer consume method to look like other tools (Arnaldo Carvalho de Melo) o Allow to specify lib compile variable for spec usage (Jiri Olsa) o Fix GNU-only grep usage in Makefile (John Spencer) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-09-17perf record: Use ring buffer consume method to look like other toolsArnaldo Carvalho de Melo
All builtins that consume events from perf's ring buffer now end up calling perf_evlist__mmap_consume(), which will allow unmapping the ring buffer when all the fds gets closed and all events in the buffer consumed. This is in preparation for the patchkit that will notice POLLHUP on perf events file descriptors. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-8vhaeeoq11ppz0713el4xcps@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-09-17perf probe: Do not use dwfl_module_addrsym if dwarf_diename finds symbol nameMasami Hiramatsu
Do not use dwfl_module_addrsym if dwarf_diename can find the symbol name, since dwfl_module_addrsym can be failed on shared libraries. Without this patch ---- $ perf probe -x ../lib/traceevent/libtraceevent.so -V create_arg_op Failed to find symbol at 0x11df1 Failed to find the address of create_arg_op Error: Failed to show vars. ---- With this patch ---- $ perf probe -x ../lib/traceevent/libtraceevent.so -V create_arg_op Available variables at create_arg_op @<create_arg_op+0> enum filter_op_type btype struct filter_arg* arg ---- This bug was reported on linux-perf-users@vger.kernel.org. Reported-by: david lerner <dlernerdroid@gmail.com> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: david lerner <dlernerdroid@gmail.com> Cc: linux-perf-user@vger.kernel.org Cc: yrl.pp-manager.tt@hitachi.com Link: http://permalink.gmane.org/gmane.linux.kernel.perf.user/1691 Link: http://lkml.kernel.org/r/20140917084101.3722.25299.stgit@kbuild-f20.novalocal Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-09-17perf probe: Do not access kallsyms when analyzing user binariesMasami Hiramatsu
Do not access kallsyms to show available variables and show source lines in user binaries. This behavior always requires the root privilege when sysctl sets kernel.kptr_restrict=1, but we don't need it just for analyzing user binaries. Without this patch (by normal user, kptr_restrict=1): ---- $ perf probe -x ./perf -V add_cmdname Failed to init vmlinux path. Error: Failed to show vars. $ perf probe -x ./perf -L add_cmdname Failed to init vmlinux path. Error: Failed to show lines. ---- With this patch: ---- $ perf probe -x ./perf -V add_cmdname Available variables at add_cmdname @<perf_unknown_cmd_config+144> (No matched variables) @<list_commands_in_dir+160> (No matched variables) @<add_cmdname+0> char* name size_t len struct cmdnames* cmds $ perf probe -x ./perf -L add_cmdname <add_cmdname@/home/fedora/ksrc/linux-3/tools/perf/util/help.c:0> 0 void add_cmdname(struct cmdnames *cmds, const char *name, size_t len) 1 { 2 struct cmdname *ent = malloc(sizeof(*ent) + len + 1); 4 ent->len = len; 5 memcpy(ent->name, name, len); 6 ent->name[len] = 0; ... ---- Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: david lerner <dlernerdroid@gmail.com> Cc: linux-perf-user@vger.kernel.org Cc: yrl.pp-manager.tt@hitachi.com Link: http://lkml.kernel.org/r/20140917084054.3722.73975.stgit@kbuild-f20.novalocal [ Added missing 'bool user' argument to the !DWARF show_line_range() stub ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-09-17perf symbols: Add path to Ubuntu kernel debuginfo fileAnton Blanchard
Ubuntu places the kernel debuginfo in /usr/lib/debug/boot/vmlinux-* Signed-off-by: Anton Blanchard <anton@samba.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> echo Link: http://lkml.kernel.org/n/tip-`ranpwd -l 24`@git.kernel.org Link: http://lkml.kernel.org/r/20140909091152.2698c0f7@kryten [ Adapted it to use the perf.data file kernel version as in 0a7e6d1b6844 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-09-17perf symbols: Ignore stripped vmlinux and fallback to kallsymsAnton Blanchard
If a vmlinux is stripped, perf will use it and ignore kallsyms. We end up with useless profiles where everything maps to a few runtime symbols: 63.39% swapper [kernel.kallsyms] [k] hcall_real_table 4.90% beam.smp [kernel.kallsyms] [k] hcall_real_table 4.44% beam.smp [kernel.kallsyms] [k] __sched_text_start 3.72% beam.smp [kernel.kallsyms] [k] __run_at_kexec Detect this case and fallback to using kallsyms. This fixes the issue: 62.81% swapper [kernel.kallsyms] [k] snooze_loop 4.44% beam.smp [kernel.kallsyms] [k] __schedule 0.91% beam.smp [kernel.kallsyms] [k] _switch 0.73% beam.smp [kernel.kallsyms] [k] put_prev_entity Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20140909085929.4a5a81f0@kryten Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-09-17perf tools: define _DEFAULT_SOURCE for glibc_2.20Chanho Park
_BSD_SOURCE was deprecated in favour of _DEFAULT_SOURCE since glibc 2.20[1]. To avoid build warning on glibc2.20, _DEFAULT_SOURCE should also be defined. [1]: https://sourceware.org/glibc/wiki/Release/2.20 Signed-off-by: Chanho Park <chanho61.park@samsung.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1410487817-13403-1-git-send-email-chanho61.park@samsung.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-09-17perf tools: Don't include sys/poll.h directlyArnaldo Carvalho de Melo
Include poll.h instead. Fixes the following warning in systems with musl's libc: /usr/include/sys/poll.h:1:2: warning: #warning redirecting incorrect #include <sys/poll.h> to <poll.h> [-Wcpp] Reported-by: John Spencer <maillist-linux@barfooze.de> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://thread.gmane.org/gmane.linux.kernel.perf.user/1687/focus=1690 Link: http://lkml.kernel.org/n/tip-k4ocrq1de3fk146oevy346bi@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-09-17perf tools: Fix GNU-only grep usage in MakefileJohn Spencer
This makes it work with non-GNU grep's as well. Signed-off-by: John Spencer <maillist-linux@barfooze.de> Acked-by: Namhyung Kim <namhyung@kernel.org> Link: http://thread.gmane.org/gmane.linux.kernel.perf.user/1686 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-09-17perf tools: Disable kernel symbol demangling by defaultAvi Kivity
Some Linux symbols (for example __vt_event_wait) are interpreted by the demangler as C++ mangled names, which of course they aren't. Disable kernel symbol demangling by default to avoid this, and allow enabling it with a new option --demangle-kernel for those who wish it. Reported-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Avi Kivity <avi@cloudius-systems.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1410581705-26968-1-git-send-email-avi@cloudius-systems.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-09-17perf tool: fix compilation for ARMStephane Eranian
This patch fixes ARM compile of the perf tool. The debug.h header file was missing from a couple of unwind related modules. Signed-off-by: Stephane Eranian <eranian@google.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20140905042103.GA3091@quad Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-09-17perf tools: Add perf_pmu__scan_file()Adrian Hunter
Add a function to scan a sysfs file within the pmu device directory. This will be used to read capability values from the PMU 'caps' subdirectory. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1406786474-9306-8-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-09-17perf tools: Let default config be defined for a PMUAdrian Hunter
This allows default config terms to be provided for a PMU. So, for example, when the Intel PT PMU is added, it will be possible to specify: intel_pt// which will be the same as: intel_pt/tsc=1,noretcomp=0/ meaning that the trace should contain TSC timestamps and perform 'return compression'. An important consideration of this patch is that it must be possible to overwrite the default values. That has meant changing the logic so that a zero value can replace a non-zero value. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1406786474-9306-7-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-09-17perf tools: Add perf-with-kcore scriptAdrian Hunter
Decoding an Intel PT trace of the kernel requires an accurate kernel object image. This is provided by making a copy of kcore. However the copy needs to be made under the same conditions as the original recording, and then it needs to be associated with the perf.data file. The perf-with-kcore script does that. The script also checks the permissions on the buildid cache and can be used to fix them. That is needed for distributions where root does not have a home directory and consequently writes to the same buildid cache as the user, resulting in cached files that the user does not have access to. Example: $ ./perf-with-kcore Usage: perf-with-kcore <perf sub-command> <perf.data directory> [<sub-command options> [ -- <workload>]] <perf sub-command> can be record, script, report or inject or: perf-with-kcore fix_buildid_cache_permissions $ ./perf-with-kcore record pt_uname -e intel_pt// -- uname Recording Using /home/ahunter/bin/perf perf version 3.15.rc3.g4549ba /home/ahunter/bin/perf record -o pt_uname/perf.data -e intel_pt// -- uname Linux [ perf record: Woken up 3 times to write data ] [ perf record: Captured and wrote 0.023 MB pt_uname/perf.data ] Copying kcore [sudo] password for ahunter: Done $ tools/perf/perf-with-kcore.sh script pt_uname | head Using /home/ahunter/bin/perf perf version 3.15.rc3.g4549ba /home/ahunter/bin/perf script -i pt_uname/perf.data --kallsyms=pt_uname/kcore_dir/kallsyms swapper 0 [002] 161533.969666: sched:sched_switch: swapper/2:0 [120] R ==> perf:11316 [120] :11315 11315 [003] 161533.969704: sched:sched_switch: perf:11315 [120] S ==> swapper/3:0 [120] :11316 11316 [002] 161533.969783: sched:sched_switch: perf:11316 [120] R ==> migration/2:33 [0] :33 33 [002] 161533.969791: sched:sched_switch: migration/2:33 [0] S ==> swapper/2:0 [120] swapper 0 [003] 161533.969792: sched:sched_switch: swapper/3:0 [120] R ==> perf:11316 [120] :11316 11316 [003] 161533.970062: branches: 0 [unknown] ([unknown]) => ffffffff810532fa native_write_msr_safe ([kernel.kallsyms]) :11316 11316 [003] 161533.970062: branches: ffffffff810532fd native_write_msr_safe ([kernel.kallsyms]) => ffffffff81035b31 pt_config_start ([kernel.kallsyms]) Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1406786474-9306-30-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-09-17perf tools: Let a user specify a PMU event without any config termsAdrian Hunter
This enables a PMU event to be specified in the form: pmu// which is effectively the same as: pmu/config=0/ This patch is a precursor to defining default config for a PMU. Further explanation extracted from lkml thread: Imagine that the 'tsc' term did not exist. Intel PT trace data would not contain TSC packets, and the decoder would not know how to decode them. Then imagine that a new version of the hardware adds 'tsc'. It is such a useful feature that we want it by default, but older versions of the tools don't know how to decode it, so the kernel cannot turn it on by default. It is similar to why the kernel does not select perf_event_attr.mmap2 by default. The kernel doesn't know whether the tool supports it. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1408129739-17368-6-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-09-17perf tools: Allow to specify lib compile variable for spec usageJiri Olsa
We need a way to specify $(lib) part of the installation path for traceevent plugin libraries. Currently we use 'lib64' for x86_64 and 'lib' otherwise. Instead of listing all possible values, this change allows the rpm spec code to specify the correct $(lib) part based on processed architecture, like $ make ... lib=%{_lib} Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Kyle McMartin <kyle@mcmartin.ca> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1408978552-17131-1-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-09-17perf kvm stat report: Unify the title bar outputAlexander Yarygin
The 'live' command prints additional information to the "Analyze events for " title bar about the current target. Let's print the same title for the 'report' command. Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com> Acked-by: David Ahern <dsahern@gmail.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1409579095-12963-4-git-send-email-yarygin@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-09-17perf kvm stat report: Enable the target.system_wide flagAlexander Yarygin
The 'perf kvm stat report' command can be used to analyze events either for system wide or for specific pids. Let's enable kvm->opts.target.system_wide flag when 'report' command is running for system-wide analyzing. This helps to sync kvm->opts.target values in 'report' and 'live' commands. Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com> Acked-by: David Ahern <dsahern@gmail.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1409579095-12963-3-git-send-email-yarygin@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-09-17perf kvm stat report: Save pid string in opts.target.pidAlexander Yarygin
The 'perf kvm stat report' command uses the kvm->pid_str field to keep the value of the --pid option. Let's use kvm->opts.target.pid instead. Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com> Acked-by: David Ahern <dsahern@gmail.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1409579095-12963-2-git-send-email-yarygin@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-09-17perf tools powerpc: Fix build issue when DWARF support is disabledAnton Blanchard
The powerpc skip callchain code uses DWARF, so we must disable it if DWARF is disabled. Signed-off-by: Anton Blanchard <anton@samba.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20140825182506.2be6512d@kryten Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-09-17perf tools: Add +field argument support for --sort optionJiri Olsa
Adding support to add field(s) to default sort order via using the '+' prefix, like for report: $ perf report Samples: 2K of event 'cycles', Event count (approx.): 882172583 Overhead Command Shared Object Symbol 7.39% swapper [kernel.kallsyms] [k] intel_idle 1.97% firefox libpthread-2.17.so [.] pthread_mutex_lock 1.39% firefox [snd_hda_intel] [k] azx_get_position 1.11% firefox libpthread-2.17.so [.] pthread_mutex_unlock $ perf report -s +cpu Samples: 2K of event 'cycles', Event count (approx.): 882172583 Overhead Command Shared Object Symbol CPU 2.89% swapper [kernel.kallsyms] [k] intel_idle 000 2.61% swapper [kernel.kallsyms] [k] intel_idle 002 1.20% swapper [kernel.kallsyms] [k] intel_idle 001 0.82% firefox libpthread-2.17.so [.] pthread_mutex_lock 002 Works in general for commands using --sort option. v2 with changes suggested: - Use dynamic memory instead static buffer - Fix error message typo Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20140823125948.GA1193@krava.brq.redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-09-16perf: Do not check PERF_EVENT_STATE_EXIT on syscall read pathJiri Olsa
Revert PERF_EVENT_STATE_EXIT check on read syscall path. It breaks standard way to read counter, which is to open the counter, wait for the monitored process to die and read the counter. Reported-by: Stephane Eranian <eranian@google.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> Cc: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/20140908143107.GG17728@krava.brq.redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-09-09perf/x86: Fix section mismatch in split uncore driverAndi Kleen
The new split Intel uncore driver code that recently went into tip added a section mismatch, which the build process complains about. uncore_pmu_register() can be called from uncore_pci_probe,() which is not __init and can be called from pci driver ->probe. I'm not fully sure if it's actually possible to call the probe function later, but it seems safer to mark uncore_pmu_register not __init. This also fixes the warning. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: http://lkml.kernel.org/r/1409332858-29039-1-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-09-09perf/x86/intel: Mark initialization code as suchMathias Krause
A few of the initialization functions are missing the __init annotation. Fix this and thereby allow ~680 additional bytes of code to be released after initialization. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: x86@kernel.org Link: http://lkml.kernel.org/r/1409071785-26015-1-git-send-email-minipli@googlemail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-09-09perf/core: Replace rcu_assign_pointer() with RCU_INIT_POINTER()Andreea-Cristina Bernat
The use of "rcu_assign_pointer()" is NULLing out the pointer. According to RCU_INIT_POINTER()'s block comment: "1. This use of RCU_INIT_POINTER() is NULLing out the pointer" it is better to use it instead of rcu_assign_pointer() because it has a smaller overhead. The following Coccinelle semantic patch was used: @@ @@ - rcu_assign_pointer + RCU_INIT_POINTER (..., NULL) Signed-off-by: Andreea-Cristina Bernat <bernat.ada@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Link: http://lkml.kernel.org/r/20140822132605.GA20130@ada Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-09-09perf/callchain: Replace rcu_assign_pointer() with RCU_INIT_POINTER()Andreea-Cristina Bernat
The use of "rcu_assign_pointer()" is NULLing out the pointer. According to RCU_INIT_POINTER()'s block comment: "1. This use of RCU_INIT_POINTER() is NULLing out the pointer" it is better to use it instead of rcu_assign_pointer() because it has a smaller overhead. The following Coccinelle semantic patch was used: @@ @@ - rcu_assign_pointer + RCU_INIT_POINTER (..., NULL) Signed-off-by: Andreea-Cristina Bernat <bernat.ada@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: paulmck@linux.vnet.ibm.com Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Link: http://lkml.kernel.org/r/20140822141536.GA32051@ada Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-09-09Merge tag 'v3.17-rc4' into perf/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-09-07Linux 3.17-rc4v3.17-rc4Linus Torvalds
2014-09-07Documentation: new page link in SubmittingPatchesSudip Mukherjee
new link for - How to piss off a Linux kernel subsystem maintainer Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-07Documentation: NFS/RDMA: Document separate Kconfig symbolsPaul Bolle
The NFS/RDMA Kconfig symbol was split into separate options for client and server in commit 2e8c12e1b765 ("xprtrdma: add separate Kconfig options for NFSoRDMA client and server support"). Update the documentation to reflect this split. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: "J. Bruce Fields" <bfields@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-07Documentation: misc-devices: Rename freefall.c from hpfall.c in lis2lv02dMasanari Iida
hpfall.c was renamed to freefall.c in 3.16, but this file still refer to hpfall.c instead of freefall.c Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-07Documentation: i2c: rename variable "register" to "reg"Jose Manuel Alarcon Roldan
The example code provided with the i2c device interface documentation won't compile since it uses the reserved word "register" to name a variable. The compiler fails with this error message: error: expected identifier or '(' before '=' token __u8 register = 0x20; /* Device register to access */ ^ Rename the variable "register" to simply "reg" in the example code. Another couple of typos has been fixed as well. [Change "! =" to "!=".] Signed-off-by: Jose Alarcon Roldan <jose.alarcon.roldan@gmail.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-07Documentation: seq_file: Document seq_open_private(), seq_release_private()Rob Jones
Despite the fact that these functions have been around for years, they are little used (only 15 uses in 13 files at the preseht time) even though many other files use work-arounds to achieve the same result. By documenting them, hopefully they will become more widely used. Signed-off-by: Rob Jones <rob.jones@codethink.co.uk> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-07Merge tag 'pm+acpi-3.17-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: "These are regression fixes (ACPI sysfs, ACPI video, suspend test), ACPI cpuidle deadlock fix, missing runtime validation of ACPI _DSD output, a fix and a new CPU ID for the RAPL driver, new blacklist entry for the ACPI EC driver and a couple of trivial cleanups (intel_pstate and generic PM domains). Specifics: - Fix for recently broken test_suspend= command line argument (Rafael Wysocki). - Fixes for regressions related to the ACPI video driver caused by switching the default to native backlight handling in 3.16 from Hans de Goede. - Fix for a sysfs attribute of ACPI device objects that returns stale values sometimes due to the fact that they are cached instead of executing the appropriate method (_SUN) every time (broken in 3.14). From Yasuaki Ishimatsu. - Fix for a deadlock between cpuidle_lock and cpu_hotplug.lock in the ACPI processor driver from Jiri Kosina. - Runtime output validation for the ACPI _DSD device configuration object missing from the support for it that has been introduced recently. From Mika Westerberg. - Fix for an unuseful and misleading RAPL (Running Average Power Limit) domain detection message in the RAPL driver from Jacob Pan. - New Intel Haswell CPU ID for the RAPL driver from Jason Baron. - New Clevo W350etq blacklist entry for the ACPI EC driver from Lan Tianyu. - Cleanup for the intel_pstate driver and the core generic PM domains code from Gabriele Mazzotta and Geert Uytterhoeven" * tag 'pm+acpi-3.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / cpuidle: fix deadlock between cpuidle_lock and cpu_hotplug.lock ACPI / scan: not cache _SUN value in struct acpi_device_pnp cpufreq: intel_pstate: Remove unneeded variable powercap / RAPL: change domain detection message powercap / RAPL: add support for CPU model 0x3f PM / domains: Make generic_pm_domain.name const PM / sleep: Fix test_suspend= command line option ACPI / EC: Add msi quirk for Clevo W350etq ACPI / video: Disable native_backlight on HP ENVY 15 Notebook PC ACPI / video: Add a disable_native_backlight quirk ACPI / video: Fix use_native_backlight selection logic ACPICA: ACPI 5.1: Add support for runtime validation of _DSD package.
2014-09-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull filesystem fixes from Al Viro: "Several bugfixes (all of them -stable fodder). Alexey's one deals with double mutex_lock() in UFS (apparently, nobody has tried to test "ufs: sb mutex merge + mutex_destroy" on something like file creation/removal on ufs). Mine deal with two kinds of umount bugs, in umount propagation and in handling of automounted submounts, both resulting in bogus transient EBUSY from umount" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ufs: fix deadlocks introduced by sb mutex merge fix EBUSY on umount() from MNT_SHRINKABLE get rid of propagate_umount() mistakenly treating slaves as busy.
2014-09-07Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU fix from Ingo Molnar: "A boot hang fix for the offloaded callback RCU model (RCU_NOCB_CPU=y && (TREE_CPU=y || TREE_PREEMPT_RC)) in certain bootup scenarios" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rcu: Make nocb leader kthreads process pending callbacks after spawning
2014-09-07Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "Three fixlets from the timer departement: - Update the timekeeper before updating vsyscall and pvclock. This fixes the kvm-clock regression reported by Chris and Paolo. - Use the proper irq work interface from NMI. This fixes the regression reported by Catalin and Dave. - Clarify the compat_nanosleep error handling mechanism to avoid future confusion" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Update timekeeper before updating vsyscall and pvclock compat: nanosleep: Clarify error handling nohz: Restore NMI safe local irq work for local nohz kick
2014-09-07ufs: fix deadlocks introduced by sb mutex mergeAlexey Khoroshilov
Commit 0244756edc4b ("ufs: sb mutex merge + mutex_destroy") introduces deadlocks in ufs_new_inode() and ufs_free_inode(). Most callers of that functions acqure the mutex by themselves and ufs_{new,free}_inode() do that via lock_ufs(), i.e we have an unavoidable double lock. The patch proposes to resolve the issue by making sure that ufs_{new,free}_inode() are not called with the mutex held. Found by Linux Driver Verification project (linuxtesting.org). Cc: stable@vger.kernel.org # 3.16 Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-09-06Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "A smattering of bug fixes across most architectures" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: powerpc/kvm/cma: Fix panic introduces by signed shift operation KVM: s390/mm: Fix guest storage key corruption in ptep_set_access_flags KVM: s390/mm: Fix storage key corruption during swapping arm/arm64: KVM: Complete WFI/WFE instructions ARM/ARM64: KVM: Nuke Hyp-mode tlbs before enabling MMU KVM: s390/mm: try a cow on read only pages for key ops KVM: s390: Fix user triggerable bug in dead code
2014-09-06Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Kevin Hilman: "Another round of fixes from arm-soc land, which are mostly DT fixes for: - OMAP: handful of DT fixes devices on newly supported hardware - davinci: fix 2nd EDMA channel - ux500: extend previous pinctrl fix to another board - at91: clock registration fixes, compatibility string precision And one more fix for event cleanup in drivers/bus/arm-ccn" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: bus: arm-ccn: Move event cleanup routine ARM: at91/dt: rm9200: fix usb clock definition ARM: at91: rm9200: fix clock registration ARM: at91/dt: sam9g20: set at91sam9g20 pllb driver ARM: dts: dra7-evm: Add vtt regulator support ARM: dts: dra7-evm: Fix spi1 mux documentation ARM: dts: am43x-epos-evm: Disable QSPI to prevent conflict with GPMC-NAND ARM: OMAP2+: gpmc: Don't complain if wait pin is used without r/w monitoring ARM: dts: am43xx-epos-evm: Don't use read/write wait monitoring ARM: dts: am437x-gp-evm: Don't use read/write wait monitoring ARM: dts: am437x-gp-evm: Use BCH16 ECC scheme instead of BCH8 ARM: dts: am43x-epos-evm: Use BCH16 ECC scheme instead of BCH8 ARM: dts: am4372: fix USB regs size ARM: dts: am437x-gp: switch i2c0 to 100KHz ARM: dts: dra7-evm: Fix 8th NAND partition's name ARM: dts: dra7-evm: Fix i2c3 pinmux and frequency ARM: ux500: disable msp2 node on Snowball ARM: edma: Fix configuration parsing for SoCs with multiple eDMA3 CC ARM: dts: set 'ti,set-rate-parent' for dpll4_m5x2 clock
2014-09-06Merge tag 'xfs-for-linus-3.17-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs Pull xfs fixes from Dave Chinner: "The fixes all address recently discovered data corruption issues. The original Direct IO issue was discovered by Chris Mason @ Facebook on a production workload which mixed buffered reads with direct reads and writes IO to the same file. The fix for that exposed other issues with page invalidation (exposed by millions of fsx operations) failing due to dirty buffers beyond EOF. Finally, the collapse_range code could also cause problems due to racing writeback changing the extent map while it was being shifted around. The commits for that problem are simple mitigation fixes that prevent the problem from occuring. A more robust fix for 3.18 that addresses the underlying problem is currently being worked on by Brian. Summary of fixes: - a direct IO read/buffered read data corruption - the associated fallout from the DIO data corruption fix - collapse range bugs that are potential data corruption issues" * tag 'xfs-for-linus-3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: xfs: trim eofblocks before collapse range xfs: xfs_file_collapse_range is delalloc challenged xfs: don't log inode unless extent shift makes extent modifications xfs: use ranged writeback and invalidation for direct IO xfs: don't zero partial page cache pages during O_DIRECT writes xfs: don't zero partial page cache pages during O_DIRECT writes xfs: don't dirty buffers beyond EOF
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-31 13:48:31 +0000