summaryrefslogtreecommitdiff
path: root/arch/mips/include
AgeCommit message (Collapse)Author
2013-02-19MIPS: ath79: add WMAC registration code for the QCA955X SoCsGabor Juhos
The SoC has a built-in wireless MAC. Register a platform device for that to make it usable with the ath9k driver. Cc: Rodriguez, Luis <rodrigue@qca.qualcomm.com> Cc: Giori, Kathy <kgiori@qca.qualcomm.com> Cc: QCA Linux Team <qca-linux-team@qca.qualcomm.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4956/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-19MIPS: ath79: add QCA955X specific glue to ath79_device_reset_{set, clear}Gabor Juhos
The ath79_device_reset_* are causing BUG when those are used on the QCA955x SoCs. The patch adds the required code to avoid that. Cc: Rodriguez, Luis <rodrigue@qca.qualcomm.com> Cc: Giori, Kathy <kgiori@qca.qualcomm.com> Cc: QCA Linux Team <qca-linux-team@qca.qualcomm.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4948/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-19MIPS: ath79: add GPIO setup code for the QCA955X SoCsGabor Juhos
The existing code can handle the GPIO controller of the QCA955x SoCs. Add a minimal glue code to make it working. Cc: Rodriguez, Luis <rodrigue@qca.qualcomm.com> Cc: Giori, Kathy <kgiori@qca.qualcomm.com> Cc: QCA Linux Team <qca-linux-team@qca.qualcomm.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4947/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-19MIPS: ath79: add IRQ handling code for the QCA955X SoCsGabor Juhos
The IRQ routing in the QCA955x SoCs is slightly different from the routing implemented in the already supported SoCs. Cc: Rodriguez, Luis <rodrigue@qca.qualcomm.com> Cc: Giori, Kathy <kgiori@qca.qualcomm.com> Cc: QCA Linux Team <qca-linux-team@qca.qualcomm.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4955/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-19MIPS: ath79: add clock setup code for the QCA955X SoCsGabor Juhos
The patch adds code to get various clock frequencies from the PLLs used in the QCA955x SoCs. Cc: Rodriguez, Luis <rodrigue@qca.qualcomm.com> Cc: Giori, Kathy <kgiori@qca.qualcomm.com> Cc: QCA Linux Team <qca-linux-team@qca.qualcomm.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4945/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-19MIPS: ath79: add SoC detection code for the QCA955X SoCsGabor Juhos
Also add 'soc_is_qca955[68x]' helper functions and a Kconfig symbol for the SoC family. Cc: Rodriguez, Luis <rodrigue@qca.qualcomm.com> Cc: Giori, Kathy <kgiori@qca.qualcomm.com> Cc: QCA Linux Team <qca-linux-team@qca.qualcomm.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4943/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-19MIPS: ath79: add early printk support for the QCA955X SoCsGabor Juhos
The patch allows to see kernel messages on the QCA955X SoCs in early boot stage. Cc: Rodriguez, Luis <rodrigue@qca.qualcomm.com> Cc: Giori, Kathy <kgiori@qca.qualcomm.com> Cc: QCA Linux Team <qca-linux-team@qca.qualcomm.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4944/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17ath79: remove ATH79_MISC_IRQ_* definesGabor Juhos
Use the ATH79_MISC_IRQ() macro instead. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4930/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17ath79: add ATH79_CPU_IRQ() macroGabor Juhos
Remove the individual ATH79_CPU_IRQ_* constants and use the new macro instead of those. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4929/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: pci-ar724x: setup command register of the PCI controllerGabor Juhos
The command register of the PCI controller is not initialized correctly by the bootloader on some boards and this leads to non working PCI bus. Add code to initialize the command register from the Linux code to avoid this. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4916/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: add dummy pci_load_of_rangesGabor Juhos
The pci_load_of_ranges function is only available if CONFIG_OF is selected. If the function is used without CONFIG_OF being enabled it will cause a build error. Add a dummy inline function to avoid this. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4911/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: ath79: remove unused ar7{1x,24}x_pcibios_init functionsGabor Juhos
The functions are unused now, so remove them. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4909/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: ath79: move global PCI defines into a common headerGabor Juhos
The constants will be used by a subsequent patch. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4907/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: add irqdomain support for the CPU IRQ controllerGabor Juhos
Add code to load a irq_domain for the MIPS IRQ controller from a devicetree file. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Acked-by: David Daney <david.daney@cavium.com> Patchwork: http://patchwork.linux-mips.org/patch/4902/
2013-02-17MIPS: ralink: adds support for RT305x SoC familyJohn Crispin
Add support code for rt3050, rt3052, rt3350, rt3352 and rt5350 SOC. The code detects the SoC and registers the clk / pinmux settings. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4896/
2013-02-17MIPS: ralink: adds include filesJohn Crispin
Before we start adding the platform code we add the common include files. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4893/
2013-02-17MIPS: ath79: simplify MISC IRQ handlingGabor Juhos
The current code uses multiple if statements for demultiplexing the different interrupt sources. Additionally, the MISC interrupt controller has 32 interrupt sources and the current code does not handles all of them. Get rid of the if statements and process all interrupt sources in a loop to fix these issues. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4874/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: ath79: fix GPIO function selection for AR934x SoCsGabor Juhos
GPIO function selection is not working on the AR934x SoCs because the offset of the function selection register is different on those. Add a helper routine which returns the correct register address based on the SoC type, and use that in the 'ath79_gpio_function_*' routines. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4870/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: Add new GIC clocksource.Steven J. Hill
Add new clocksource that uses the counter present on the MIPS Global Interrupt Controller. Signed-off-by: Steven J. Hill <sjhill@mips.com> Patchwork: http://patchwork.linux-mips.org/patch/4681/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: dsp: Simplify the DSP macros.Steven J. Hill
Simplify the DSP macros for vanilla (non-microMIPS) kernels and toolchains that do not support the DSP ASEs. Signed-off-by: Steven J. Hill <sjhill@mips.com> Patchwork: http://patchwork.linux-mips.org/patch/4687/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: dsp: Support toolchains without DSP ASE and microMIPS.Steven J. Hill
Add macros to support the DSP ASE with microMIPS kernels when the toolchain does not have support. Signed-off-by: Steven J. Hill <sjhill@mips.com> Patchwork: http://patchwork.linux-mips.org/patch/4686/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: dsp: Add assembler support for DSP ASEs.Steven J. Hill
Newer toolchains support the DSP and DSP Rev2 instructions. This patch performs a check for that support and adds compiler and assembler flags for only the files that need use those instructions. Signed-off-by: Steven J. Hill <sjhill@mips.com> Acked-by: Florian Fainelli <florian@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4752/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: Add support for the M14KEc core.Steven J. Hill
Signed-off-by: Steven J. Hill <sjhill@mips.com> Patchwork: http://patchwork.linux-mips.org/patch/4682/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: Clean-ups for MIPS Technologies Inc. generic header file.Steven J. Hill
Clean up standard header text and remove unused #define. Signed-off-by: Steven J. Hill <sjhill@mips.com> Patchwork: http://patchwork.linux-mips.org/patch/4703/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: Netlogic: No hazards needed for XLR/XLSJayachandran C
TLB and COP0 hazards are handled in hardware for Netlogic XLR/XLS SoCs. Update hazards.h to pick more optimal set of definitions when compiling for XLR/XLS. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4788/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: Netlogic: Use PIC timer as a clocksourceJayachandran C
The XLR/XLS/XLP PIC has a 8 countdown timers which run at the PIC frequencey. One of these can be used as a clocksource to provide timestamps that is common across cores. This can be used in place of the count/compare clocksource which is per-CPU. On XLR/XLS PIC registers are 32-bit, so we just use the lower 32-bits of the PIC counter. On XLP, the whole 64-bit can be used. Provide common macros and functions for PIC timer registers on XLR/XLS and XLP, and use them to register a PIC clocksource. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4786/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: Netlogic: Split XLP L1 i-cache among threadsJayachandran C
Since we now use r4k cache code for Netlogic XLP, it is better to split L1 icache among the active threads, so that threads won't step on each other while flushing icache. The L1 dcache is already split among the threads in the core. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4787/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: Netlogic: Optimize EIMR/EIRR accesses in 32-bitJayachandran C
Provide functions ack_c0_eirr(), set_c0_eimr(), clear_c0_eimr() and read_c0_eirr_and_eimr() that do the EIMR and EIRR operations and update the interrupt handling code to use these functions. Also, use the EIMR register functions to mask interrupts in the irq code. The 64-bit interrupt request and mask registers (EIRR and EIMR) are accessed when the interrupts are off, and the common operations are to set or clear a bit in these registers. Using the 64-bit c0 access functions for these operations is not optimal in 32-bit, because it will disable/restore interrupts and split/join the 64-bit value during each register access. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4790/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: lantiq: rework external irq codeJohn Crispin
This code makes the irqs used by the EIU loadable from the DT. Additionally we add a helper that allows the pinctrl layer to map external irqs to real irq numbers. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4818/
2013-02-17MIPS: lantiq: adds static clock for PP32John Crispin
The Lantiq DSL SoCs have an internal networking processor. Add code to read the static clock rate. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4815/
2013-02-15MIPS: Cleanup break and trap codes.Ralf Baechle
Very ancient out-of-tree KDB versions were using BRK_KDB code but it's unused in modern kernels since a long time. Delete it. The microMIPS encoding only reserves 4 bits for a trap code so it's time for further weedkilling. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-02-15MIPS: Redefine value of BRK_BUG.Steven J. Hill
The BRK_BUG value is used in the BUG and __BUG_ON inline macros. For standard MIPS cores the code in the 'tne' instruction is 10-bits long. In microMIPS, the 'tne' instruction is recoded and the code can only be 4-bits long. We change the value to 12 instead of 512 so that both classic and microMIPS kernels build. [ralf@linux-mips.org: Many of the break codes starting from 0 are used across many MIPS UNIX variants. Codes starting from 512 are operating system specific additions. 1023 again is also used by other operating systems] Signed-off-by: Steven J. Hill <sjhill@mips.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-02-15MIPS: Add printing of ISA version in cpuinfo.Steven J. Hill
Display the MIPS ISA version release in the /proc/cpuinfo file. [ralf@linux-mips.org: Add support for MIPS I ... IV legacy architecture revisions. Also differenciate between MIPS32 and MIPS64 versions instead of lumping them together as just r1 and r2. Note to application programmers: this indicates the CPU's ISA level It does not imply the current execution environment does support it. For example an O32 application seeing "mips64r2" would still be restricted by by the execution environment to 32-bit - but the kernel could run mips64r2 code. The same for a 32-bit kernel running on a 64-bit processor. This field doesn't include ASEs or optional architecture modules nor other detailed flags such as the availability of an FPU.] Signed-off-by: Steven J. Hill <sjhill@mips.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/4714/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-02-15MIPS: BCM47XX: add bcm47xx prefix in front of nvram function namesHauke Mehrtens
The nvram functions are exported and used by some normal drivers. To prevent name clashes with ofter parts of the kernel code add a bcm47xx_ prefix in front of the function names and the header file name. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4744/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-15MIPS: BCM47XX: use common error codes in nvram readsHauke Mehrtens
Instead of using our own error codes use some common codes. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4739/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-14burying unused conditionalsAl Viro
__ARCH_WANT_SYS_RT_SIGACTION, __ARCH_WANT_SYS_RT_SIGSUSPEND, __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND, __ARCH_WANT_COMPAT_SYS_SCHED_RR_GET_INTERVAL - not used anymore CONFIG_GENERIC_{SIGALTSTACK,COMPAT_RT_SIG{ACTION,QUEUEINFO,PENDING,PROCMASK}} - can be assumed always set.
2013-02-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Synchronize with 'net' in order to sort out some l2tp, wireless, and ipv6 GRE fixes that will be built on top of in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-03mips: switch to generic sys_fork() and sys_clone()Al Viro
we still need the wrappers to store callee-saved registers in pt_regs, but once that done we can jump to kernel/fork.c variants. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-03mips: switch to generic sigaltstackAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-03consolidate kernel-side struct sigaction declarationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-03consolidate declarations of k_sigactionAl Viro
Only alpha and sparc are unusual - they have ka_restorer in it. And nobody needs that exposed to userland. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-01MIPS: MSP71xx: Move code.Ralf Baechle
Now that Yosemite's gone we can move the MSP71xx code one level up. Shane McDonald <mcdonald.shane@gmail.com>'s https://patchwork.linux-mips.org/patch/4736/ has been folded into this patch. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-02-01MIPS: Whitespace cleanup.Ralf Baechle
Having received another series of whitespace patches I decided to do this once and for all rather than dealing with this kind of patches trickling in forever. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-02-01MIPS: Nuke trailing whitespace.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-02-01MIPS: PNX8550: Remove support for SOC and JBS and STB810 boards.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-02-01MIPS: SEAD3: Implement OF support.Steven J. Hill
Activate USE_OF for SEAD-3 platform. Add basic DTS file and convert memory detection and reservations to use OF. [ralf@linux-mips.org: Remove unnecessary #ifdef wrapper in generic.h. Make <asm/mips-boards/generic.h> inclusion work even without prior <linux/of_fdt.h> inclusion.] Signed-off-by: Steven J. Hill <sjhill@mips.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4809/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-02-01MIPS: inst.h: Add MDMX and paired single instruction aka MIPS-3D formats.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-02-01MIPS: inst.h: Eleminate per endianess structure definitions.Ralf Baechle
This makes space for further growth of the header without excessive bloat. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-02-01MIPS: UAPI: Split inst.h into exported and kernel-only part.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-02-01MIPS: Whitespace cleanups and reformatting.Steven J. Hill
Signed-off-by: Steven J. Hill <sjhill@mips.com> Cc: linux-mips@linux-mips.org Cc: Steven J. Hill <sjhill@mips.com> Cc: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/4781/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-29 14:46:48 +0000