summaryrefslogtreecommitdiff
path: root/arch/x86/kernel
AgeCommit message (Collapse)Author
2012-10-30x86, AMD: Change Boris' email addressBorislav Petkov
Move to private email and put in maintained status. Signed-off-by: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/1351532410-4887-1-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-27rcu: Fix unrecovered RCU user mode in syscall_trace_leave()Frederic Weisbecker
On x86-64 syscall exit, 3 non exclusive events may happen looping in the following order: 1) Check if we need resched for user preemption, if so call schedule_user() 2) Check if we have pending signals, if so call do_notify_resume() 3) Check if we do syscall tracing, if so call syscall_trace_leave() However syscall_trace_leave() has been written assuming it directly follows the syscall and forget about the above possible 1st and 2nd steps. Now schedule_user() and do_notify_resume() exit in RCU user mode because they have most chances to resume userspace immediately and this avoids an rcu_user_enter() call in the syscall fast path. So by the time we call syscall_trace_leave(), we may well be in RCU user mode. To fix this up, simply call rcu_user_exit() in the beginning of this function. This fixes some reported RCU uses in extended quiescent state. Reported-by: Dave Jones <davej@redhat.com> Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-10-26Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "This fixes a couple of nasty page table initialization bugs which were causing kdump regressions. A clean rearchitecturing of the code is in the works - meanwhile these are reverts that restore the best-known-working state of the kernel. There's also EFI fixes and other small fixes." * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, mm: Undo incorrect revert in arch/x86/mm/init.c x86: efi: Turn off efi_enabled after setup on mixed fw/kernel x86, mm: Find_early_table_space based on ranges that are actually being mapped x86, mm: Use memblock memory loop instead of e820_RAM x86, mm: Trim memory in memblock to be page aligned x86/irq/ioapic: Check for valid irq_cfg pointer in smp_irq_move_cleanup_interrupt x86/efi: Fix oops caused by incorrect set_memory_uc() usage x86-64: Fix page table accounting Revert "x86/mm: Fix the size calculation of mapping tables" MAINTAINERS: Add EFI git repository location
2012-10-26Merge tag 'mca_cfg' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras ↵Ingo Molnar
into x86/ras Pull x86 RAS changes from Borislav Petkov: "Rework all config variables used throughout the MCA code and collect them together into a mca_config struct. This keeps them tightly and neatly packed together instead of spilled all over the place. Then, convert those which are used as booleans into real booleans and save some space." Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-26x86, MCA: Finish mca_config conversionBorislav Petkov
mce_ser, mce_bios_cmci_threshold and mce_disabled are the last three bools which need conversion. Move them to the mca_config struct and adjust usage sites accordingly. Signed-off-by: Borislav Petkov <bp@alien8.de> Acked-by: Tony Luck <tony.luck@intel.com>
2012-10-26x86, MCA: Convert the next three variables batchBorislav Petkov
Move them into the mca_config struct and adjust code touching them accordingly. Signed-off-by: Borislav Petkov <bp@alien8.de> Acked-by: Tony Luck <tony.luck@intel.com>
2012-10-26x86, MCA: Convert rip_msr, mce_bootlog, monarch_timeoutBorislav Petkov
Move above configuration variables into struct mca_config and adjust usage places accordingly. Signed-off-by: Borislav Petkov <bp@alien8.de> Acked-by: Tony Luck <tony.luck@intel.com>
2012-10-26x86, MCA: Convert dont_log_ce, banks and tolerantBorislav Petkov
Move those MCA configuration variables into struct mca_config and adjust the places they're used accordingly. Signed-off-by: Borislav Petkov <bp@alien8.de> Acked-by: Tony Luck <tony.luck@intel.com>
2012-10-26x86: Remove dead hlt_use_halt codeDaniel Lezcano
The hlt_use_halt function returns always true and there is only one definition of it. The default_idle function can then get ride of the if ... statement and we can remove the else branch. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linaro-dev@lists.linaro.org Cc: patches@linaro.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1351181591-8710-1-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-26Merge tag 'efi-for-3.7' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into x86/urgent Pull EFI fixes from Matt Fleming: "Fix oops with EFI variables on mixed 32/64-bit firmware/kernels and document EFI git repository location on kernel.org." Conflicts: arch/x86/include/asm/efi.h Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-25x86: efi: Turn off efi_enabled after setup on mixed fw/kernelOlof Johansson
When 32-bit EFI is used with 64-bit kernel (or vice versa), turn off efi_enabled once setup is done. Beyond setup, it is normally used to determine if runtime services are available and we will have none. This will resolve issues stemming from efivars modprobe panicking on a 32/64-bit setup, as well as some reboot issues on similar setups. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=45991 Reported-by: Marko Kohtala <marko.kohtala@gmail.com> Reported-by: Maxim Kammerer <mk@dee.su> Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Cc: stable@kernel.org # 3.4 - 3.6 Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2012-10-24x86, mm: Use memblock memory loop instead of e820_RAMYinghai Lu
We need to handle E820_RAM and E820_RESERVED_KERNEL at the same time. Also memblock has page aligned range for ram, so we could avoid mapping partial pages. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/CAE9FiQVZirvaBMFYRfXMmWEcHbKSicQEHz4VAwUv0xFCk51ZNw@mail.gmail.com Acked-by: Jacob Shin <jacob.shin@amd.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: <stable@vger.kernel.org>
2012-10-24x86, mm: Trim memory in memblock to be page alignedYinghai Lu
We will not map partial pages, so need to make sure memblock allocation will not allocate those bytes out. Also we will use for_each_mem_pfn_range() to loop to map memory range to keep them consistent. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/CAE9FiQVZirvaBMFYRfXMmWEcHbKSicQEHz4VAwUv0xFCk51ZNw@mail.gmail.com Acked-by: Jacob Shin <jacob.shin@amd.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: <stable@vger.kernel.org>
2012-10-24x86: Allow tracing of functions in arch/x86/kernel/rtc.cDavid Vrabel
Move native_read_tsc() to tsc.c to allow profiling to be re-enabled for rtc.c. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1349698050-6560-1-git-send-email-david.vrabel@citrix.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-24x86/irq/ioapic: Check for valid irq_cfg pointer in ↵Dimitri Sivanich
smp_irq_move_cleanup_interrupt Posting this patch to fix an issue concerning sparse irq's that I raised a while back. There was discussion about adding refcounting to sparse irqs (to fix other potential race conditions), but that does not appear to have been addressed yet. This covers the only issue of this type that I've encountered in this area. A NULL pointer dereference can occur in smp_irq_move_cleanup_interrupt() if we haven't yet setup the irq_cfg pointer in the irq_desc.irq_data.chip_data. In create_irq_nr() there is a window where we have set vector_irq in __assign_irq_vector(), but not yet called irq_set_chip_data() to set the irq_cfg pointer. Should an IRQ_MOVE_CLEANUP_VECTOR hit the cpu in question during this time, smp_irq_move_cleanup_interrupt() will attempt to process the aforementioned irq, but panic when accessing irq_cfg. Only continue processing the irq if irq_cfg is non-NULL. Signed-off-by: Dimitri Sivanich <sivanich@sgi.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Joerg Roedel <joerg.roedel@amd.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Alexander Gordeev <agordeev@redhat.com> Link: http://lkml.kernel.org/r/20121016125021.GA22935@sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-24perf/x86: Remove unused variable in nhmex_rbox_alter_er()Wei Yongjun
The variable port is initialized but never used otherwise, so remove the unused variable. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: Yan, Zheng <zheng.z.yan@intel.com> Cc: a.p.zijlstra@chello.nl Cc: paulus@samba.org Cc: acme@ghostprotocols.net Link: http://lkml.kernel.org/r/CAPgLHd8NZkYSkZm22FpZxiEh6HcA0q-V%3D29vdnheiDhgrJZ%2Byw@mail.gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-24perf/x86: Enable overflow on Intel KNC with a custom knc_pmu_handle_irq()Vince Weaver
Although based on the Intel P6 design, the interrupt mechnanism for KNC more closely resembles the Intel architectural perfmon one. We can't just re-use that code though, because KNC has different MSR numbers for the status and ack registers. In this case we just cut-and paste from perf_event_intel.c with some minor changes, as it looks like it would not be worth the trouble to change that code to be MSR-configurable. Signed-off-by: Vince Weaver <vincent.weaver@maine.edu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: eranian@gmail.com Cc: Meadows Lawrence F <lawrence.f.meadows@intel.com> Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1210171304410.23243@vincent-weaver-1.um.maine.edu [ Small stylistic edits. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-24perf/x86: Remove cpuc->enable check on Intl KNC event enable/disableVince Weaver
x86_pmu.enable() is called from x86_pmu_enable() with cpuc->enabled set to 0. This means we weren't re-enabling the counters after a context switch. This patch just removes the check, as it should't be necessary (and the equivelent x86_ generic code does not have the checks). The origin of this problem is the KNC driver being based on the P6 one. The P6 driver also has this issue, but works anyway due to various lucky accidents. Signed-off-by: Vince Weaver <vincent.weaver@maine.edu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: eranian@gmail.com Cc: Meadows Cc: Lawrence F <lawrence.f.meadows@intel.com> Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1210171303290.23243@vincent-weaver-1.um.maine.edu Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-24perf/x86: Make Intel KNC use full 40-bit width of countersVince Weaver
Early versions of Intel KNC chips have a bug where bits above 32 were not properly set. We worked around this by only using the bottom 32 bits (out of 40 that should be available). It turns out this workaround breaks overflow handling. The buggy silicon will in theory never be used in production systems, so remove this workaround so we get proper overflow support. Signed-off-by: Vince Weaver <vincent.weaver@maine.edu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: eranian@gmail.com Cc: Meadows Lawrence F <lawrence.f.meadows@intel.com> Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1210171302140.23243@vincent-weaver-1.um.maine.edu Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-24perf/x86/uncore: Handle pci_read_config_dword() errorsYan, Zheng
This, beyond handling corner cases, also fixes some build warnings: arch/x86/kernel/cpu/perf_event_intel_uncore.c: In function ‘snbep_uncore_pci_disable_box’: arch/x86/kernel/cpu/perf_event_intel_uncore.c:124:9: warning: ‘config’ is used uninitialized in this function [-Wuninitialized] arch/x86/kernel/cpu/perf_event_intel_uncore.c: In function ‘snbep_uncore_pci_enable_box’: arch/x86/kernel/cpu/perf_event_intel_uncore.c:135:9: warning: ‘config’ is used uninitialized in this function [-Wuninitialized] arch/x86/kernel/cpu/perf_event_intel_uncore.c: In function ‘snbep_uncore_pci_read_counter’: arch/x86/kernel/cpu/perf_event_intel_uncore.c:164:2: warning: ‘count’ is used uninitialized in this function [-Wuninitialized] Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Cc: a.p.zijlstra@chello.nl Link: http://lkml.kernel.org/r/1351068140-13456-1-git-send-email-zheng.z.yan@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-24perf/x86: Add hardware events translations for Intel P6 cpusJiri Olsa
Add support for Intel P6 processors to display 'events' sysfs directory (/sys/devices/cpu/events/) with hw event translations: # ls /sys/devices/cpu/events/ branch-instructions branch-misses bus-cycles cache-misses cache-references cpu-cycles instructions ref-cycles stalled-cycles-backend stalled-cycles-frontend Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349873598-12583-6-git-send-email-jolsa@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-24perf/x86: Add hardware events translations for AMD cpusJiri Olsa
Add support for AMD processors to display 'events' sysfs directory (/sys/devices/cpu/events/) with hw event translations: # ls /sys/devices/cpu/events/ branch-instructions branch-misses bus-cycles cache-misses cache-references cpu-cycles instructions ref-cycles stalled-cycles-backend stalled-cycles-frontend Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Stephane Eranian <eranian@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349873598-12583-5-git-send-email-jolsa@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-24perf/x86: Add hardware events translations for Intel cpusJiri Olsa
Add support for Intel processors to display 'events' sysfs directory (/sys/devices/cpu/events/) with hw event translations: # ls /sys/devices/cpu/events/ branch-instructions branch-misses bus-cycles cache-misses cache-references cpu-cycles instructions ref-cycles stalled-cycles-backend stalled-cycles-frontend Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Stephane Eranian <eranian@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349873598-12583-4-git-send-email-jolsa@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-24perf/x86: Filter out undefined events from sysfs events attributeJiri Olsa
The sysfs events group attribute currently shows all hw events, including also undefined ones. This patch filters out all undefined events out of the sysfs events group attribute, so they don't even show up. Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349873598-12583-3-git-send-email-jolsa@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-24perf/x86: Make hardware event translations available in sysfsJiri Olsa
Add support to display hardware events translations available through the sysfs. Add 'events' group attribute under the sysfs x86 PMU record with attribute/file for each hardware event. This patch adds only backbone for PMUs to display config under 'events' directory. The specific PMU support itself will come in next patches, however this is how the sysfs group will look like: # ls /sys/devices/cpu/events/ branch-instructions branch-misses bus-cycles cache-misses cache-references cpu-cycles instructions ref-cycles stalled-cycles-backend stalled-cycles-frontend The file - hw event ID mapping is: file hw event ID --------------------------------------------------------------- cpu-cycles PERF_COUNT_HW_CPU_CYCLES instructions PERF_COUNT_HW_INSTRUCTIONS cache-references PERF_COUNT_HW_CACHE_REFERENCES cache-misses PERF_COUNT_HW_CACHE_MISSES branch-instructions PERF_COUNT_HW_BRANCH_INSTRUCTIONS branch-misses PERF_COUNT_HW_BRANCH_MISSES bus-cycles PERF_COUNT_HW_BUS_CYCLES stalled-cycles-frontend PERF_COUNT_HW_STALLED_CYCLES_FRONTEND stalled-cycles-backend PERF_COUNT_HW_STALLED_CYCLES_BACKEND ref-cycles PERF_COUNT_HW_REF_CPU_CYCLES Each file in the 'events' directory contains the term translation for the symbolic hw event for the currently running cpu model. # cat /sys/devices/cpu/events/stalled-cycles-backend event=0xb1,umask=0x01,inv,cmask=0x01 Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Stephane Eranian <eranian@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349873598-12583-2-git-send-email-jolsa@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-24perf/x86: Remove P6 cpuc->enabled checkVince Weaver
Between 2.6.33 and 2.6.34 the PMU code was made modular. The x86_pmu_enable() call was extended to disable cpuc->enabled and iterate the counters, enabling one at a time, before calling enable_all() at the end, followed by re-enabling cpuc->enabled. Since cpuc->enabled was set to 0, that change effectively caused the "val |= ARCH_PERFMON_EVENTSEL_ENABLE;" code in p6_pmu_enable_event() and p6_pmu_disable_event() to be dead code that was never called. This change removes this code (which was confusing) and adds some extra commentary to make it more clear what is going on. Signed-off-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1210191732000.14552@vincent-weaver-1.um.maine.edu Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-24perf/x86: Update/fix generic events on P6 PMUVince Weaver
This patch updates the generic events on p6, including some new extended cache events. Values for these events were taken from the equivelant PAPI predefined events. Tested on a Pentium II. Signed-off-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1210191730080.14552@vincent-weaver-1.um.maine.edu Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-24perf/x86: Fix P6 FP_ASSIST event constraintVince Weaver
According to Intel SDM Volume 3B, FP_ASSIST is limited to Counter 1 only, not Counter 0. Tested on a Pentium II. Signed-off-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1210191728570.14552@vincent-weaver-1.um.maine.edu Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-24x86/perf: Fix virtualization sanity checkAndre Przywara
In check_hw_exists() we try to detect non-emulated MSR accesses by writing an arbitrary value into one of the PMU registers and check if it's value after a readout is still the same. This algorithm silently assumes that the register does not contain the magic value already, which is wrong in at least one situation. Fix the algorithm to really do a read-modify-write cycle. This fixes a warning under Xen under some circumstances on AMD family 10h CPUs. The reasons in more details actually sound like a story from Believe It or Not!: First you need an AMD family 10h/12h CPU. These do not reset the PERF_CTR registers on a reboot. Now you boot bare metal Linux, which goes successfully through this check, but leaves the magic value of 0xabcd in the register. You don't use the performance counters, but do a reboot (warm reset). Then you choose to boot Xen. The check will be triggered with a recent Linux kernel as Dom0 again, trying to write 0xabcd into the MSR. Xen silently drops the write (expected), but the subsequent read will return the value in the register, which just happens to be the expected magic value. Thus the test misleadingly succeeds, leaving the kernel in the belief that the PMU is available. This will trigger the following message: [ 0.020294] ------------[ cut here ]------------ [ 0.020311] WARNING: at arch/x86/xen/enlighten.c:730 xen_apic_write+0x15/0x17() [ 0.020318] Hardware name: empty [ 0.020323] Modules linked in: [ 0.020334] Pid: 1, comm: swapper/0 Not tainted 3.3.8 #7 [ 0.020340] Call Trace: [ 0.020354] [<ffffffff81050379>] warn_slowpath_common+0x80/0x98 [ 0.020369] [<ffffffff810503a6>] warn_slowpath_null+0x15/0x17 [ 0.020378] [<ffffffff810034df>] xen_apic_write+0x15/0x17 [ 0.020392] [<ffffffff8101cb2b>] perf_events_lapic_init+0x2e/0x30 [ 0.020410] [<ffffffff81ee4dd0>] init_hw_perf_events+0x250/0x407 [ 0.020419] [<ffffffff81ee4b80>] ? check_bugs+0x2d/0x2d [ 0.020430] [<ffffffff81002181>] do_one_initcall+0x7a/0x131 [ 0.020444] [<ffffffff81edbbf9>] kernel_init+0x91/0x15d [ 0.020456] [<ffffffff817caaa4>] kernel_thread_helper+0x4/0x10 [ 0.020471] [<ffffffff817c347c>] ? retint_restore_args+0x5/0x6 [ 0.020481] [<ffffffff817caaa0>] ? gs_change+0x13/0x13 [ 0.020500] ---[ end trace a7919e7f17c0a725 ]--- The new code will change every of the 16 low bits read from the register and tries to write and read-back that modified number from the MSR. Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Avi Kivity <avi@redhat.com> Link: http://lkml.kernel.org/r/1349797115-28346-2-git-send-email-andre.przywara@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-24Merge tag 'stable/for-linus-3.7-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull xen bug-fixes from Konrad Rzeszutek Wilk: - Fix mysterious SIGSEGV or SIGKILL in applications due to corrupting of the %eip when returning from a signal handler. - Fix various ARM compile issues after the merge fallout. - Continue on making more of the Xen generic code usable by ARM platform. - Fix SR-IOV passthrough to mirror multifunction PCI devices. - Fix various compile warnings. - Remove hypercalls that don't exist anymore. * tag 'stable/for-linus-3.7-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: dbgp: Fix warning when CONFIG_PCI is not enabled. xen: arm: comment on why 64-bit xen_pfn_t is safe even on 32 bit xen: balloon: use correct type for frame_list xen/x86: don't corrupt %eip when returning from a signal handler xen: arm: make p2m operations NOPs xen: balloon: don't include e820.h xen: grant: use xen_pfn_t type for frame_list. xen: events: pirq_check_eoi_map is X86 specific xen: XENMEM_translate_gpfn_list was remove ages ago and is unused. xen: sysfs: fix build warning. xen: sysfs: include err.h for PTR_ERR etc xen: xenbus: quirk uses x86 specific cpuid xen PV passthru: assign SR-IOV virtual functions to separate virtual slots xen/xenbus: Fix compile warning. xen/x86: remove duplicated include from enlighten.c
2012-10-24Merge tag 'kvm-3.7-2' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Avi Kivity: "KVM updates for 3.7-rc2" * tag 'kvm-3.7-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM guest: exit idleness when handling KVM_PV_REASON_PAGE_NOT_PRESENT KVM: apic: fix LDR calculation in x2apic mode KVM: MMU: fix release noslot pfn
2012-10-22KVM guest: exit idleness when handling KVM_PV_REASON_PAGE_NOT_PRESENTSasha Levin
KVM_PV_REASON_PAGE_NOT_PRESENT kicks cpu out of idleness, but we haven't marked that spot as an exit from idleness. Not doing so can cause RCU warnings such as: [ 732.788386] =============================== [ 732.789803] [ INFO: suspicious RCU usage. ] [ 732.790032] 3.7.0-rc1-next-20121019-sasha-00002-g6d8d02d-dirty #63 Tainted: G W [ 732.790032] ------------------------------- [ 732.790032] include/linux/rcupdate.h:738 rcu_read_lock() used illegally while idle! [ 732.790032] [ 732.790032] other info that might help us debug this: [ 732.790032] [ 732.790032] [ 732.790032] RCU used illegally from idle CPU! [ 732.790032] rcu_scheduler_active = 1, debug_locks = 1 [ 732.790032] RCU used illegally from extended quiescent state! [ 732.790032] 2 locks held by trinity-child31/8252: [ 732.790032] #0: (&rq->lock){-.-.-.}, at: [<ffffffff83a67528>] __schedule+0x178/0x8f0 [ 732.790032] #1: (rcu_read_lock){.+.+..}, at: [<ffffffff81152bde>] cpuacct_charge+0xe/0x200 [ 732.790032] [ 732.790032] stack backtrace: [ 732.790032] Pid: 8252, comm: trinity-child31 Tainted: G W 3.7.0-rc1-next-20121019-sasha-00002-g6d8d02d-dirty #63 [ 732.790032] Call Trace: [ 732.790032] [<ffffffff8118266b>] lockdep_rcu_suspicious+0x10b/0x120 [ 732.790032] [<ffffffff81152c60>] cpuacct_charge+0x90/0x200 [ 732.790032] [<ffffffff81152bde>] ? cpuacct_charge+0xe/0x200 [ 732.790032] [<ffffffff81158093>] update_curr+0x1a3/0x270 [ 732.790032] [<ffffffff81158a6a>] dequeue_entity+0x2a/0x210 [ 732.790032] [<ffffffff81158ea5>] dequeue_task_fair+0x45/0x130 [ 732.790032] [<ffffffff8114ae29>] dequeue_task+0x89/0xa0 [ 732.790032] [<ffffffff8114bb9e>] deactivate_task+0x1e/0x20 [ 732.790032] [<ffffffff83a67c29>] __schedule+0x879/0x8f0 [ 732.790032] [<ffffffff8117e20d>] ? trace_hardirqs_off+0xd/0x10 [ 732.790032] [<ffffffff810a37a5>] ? kvm_async_pf_task_wait+0x1d5/0x2b0 [ 732.790032] [<ffffffff83a67cf5>] schedule+0x55/0x60 [ 732.790032] [<ffffffff810a37c4>] kvm_async_pf_task_wait+0x1f4/0x2b0 [ 732.790032] [<ffffffff81139e50>] ? abort_exclusive_wait+0xb0/0xb0 [ 732.790032] [<ffffffff81139c25>] ? prepare_to_wait+0x25/0x90 [ 732.790032] [<ffffffff810a3a66>] do_async_page_fault+0x56/0xa0 [ 732.790032] [<ffffffff83a6a6e8>] async_page_fault+0x28/0x30 Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-10-21Merge branch 'uprobes/core' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc into perf/urgent Pull various uprobes bugfixes from Oleg Nesterov - mostly race and failure path fixes. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-20perf/x86: Disable uncore on virtualized CPUsYan, Zheng
Initializing uncore PMU on virtualized CPU may hang the kernel. This is because kvm does not emulate the entire hardware. Thers are lots of uncore related MSRs, making kvm enumerate them all is a non-trival task. So just disable uncore on virtualized CPU. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Tested-by: Pekka Enberg <penberg@kernel.org> Cc: a.p.zijlstra@chello.nl Cc: eranian@google.com Cc: andi@firstfloor.org Cc: avi@redhat.com Link: http://lkml.kernel.org/r/1345540117-14164-1-git-send-email-zheng.z.yan@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-19Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Assorted small fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf python: Properly link with libtraceevent perf hists browser: Add back callchain folding symbol perf tools: Fix build on sparc. perf python: Link with libtraceevent perf python: Initialize 'page_size' variable tools lib traceevent: Fix missed freeing of subargs in free_arg() in filter lib tools traceevent: Add back pevent assignment in __pevent_parse_format() perf hists browser: Fix off-by-two bug on the first column perf tools: Remove warnings on JIT samples for srcline sort key perf tools: Fix segfault when using srcline sort key perf: Require exclude_guest to use PEBS - kernel side enforcement perf tool: Precise mode requires exclude_guest
2012-10-20Merge tag 'perf-urgent-for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: * The python binding needs to link with libtraceevent and to initialize the 'page_size' variable so that mmaping works again. * The callchain folding character that appears on the TUI just before the overhead had disappeared due to recent changes, add it back. * Intel PEBS in VT-x context uses the DS address as a guest linear address, even though its programmed by the host as a host linear address. This either results in guest memory corruption and or the hardware faulting and 'crashing' the virtual machine. Therefore we have to disable PEBS on VT-x enter and re-enable on VT-x exit, enforcing a strict exclude_guest. Kernel side enforcement fix by Peter Zijlstra, tooling side fix by David Ahern. * Fix build on sparc due to UAPI, fix from David Miller. * Fixes for the srclike sort key for unresolved symbols and when processing samples in JITted code, where we don't have an ELF file, just an special symbol table, fixes from Namhyung Kim. * Fix some leaks in libtraceevent, from Steven Rostedt. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-19Merge commit 'v3.7-rc1' into stable/for-linus-3.7Konrad Rzeszutek Wilk
* commit 'v3.7-rc1': (10892 commits) Linux 3.7-rc1 x86, boot: Explicitly include autoconf.h for hostprogs perf: Fix UAPI fallout ARM: config: make sure that platforms are ordered by option string ARM: config: sort select statements alphanumerically UAPI: (Scripted) Disintegrate include/linux/byteorder UAPI: (Scripted) Disintegrate include/linux UAPI: Unexport linux/blk_types.h UAPI: Unexport part of linux/ppp-comp.h perf: Handle new rbtree implementation procfs: don't need a PATH_MAX allocation to hold a string representation of an int vfs: embed struct filename inside of names_cache allocation if possible audit: make audit_inode take struct filename vfs: make path_openat take a struct filename pointer vfs: turn do_path_lookup into wrapper around struct filename variant audit: allow audit code to satisfy getname requests from its names_list vfs: define struct filename and have getname() return it btrfs: Fix compilation with user namespace support enabled userns: Fix posix_acl_file_xattr_userns gid conversion userns: Properly print bluetooth socket uids ...
2012-10-19xen/x86: don't corrupt %eip when returning from a signal handlerDavid Vrabel
In 32 bit guests, if a userspace process has %eax == -ERESTARTSYS (-512) or -ERESTARTNOINTR (-513) when it is interrupted by an event /and/ the process has a pending signal then %eip (and %eax) are corrupted when returning to the main process after handling the signal. The application may then crash with SIGSEGV or a SIGILL or it may have subtly incorrect behaviour (depending on what instruction it returned to). The occurs because handle_signal() is incorrectly thinking that there is a system call that needs to restarted so it adjusts %eip and %eax to re-execute the system call instruction (even though user space had not done a system call). If %eax == -514 (-ERESTARTNOHAND (-514) or -ERESTART_RESTARTBLOCK (-516) then handle_signal() only corrupted %eax (by setting it to -EINTR). This may cause the application to crash or have incorrect behaviour. handle_signal() assumes that regs->orig_ax >= 0 means a system call so any kernel entry point that is not for a system call must push a negative value for orig_ax. For example, for physical interrupts on bare metal the inverse of the vector is pushed and page_fault() sets regs->orig_ax to -1, overwriting the hardware provided error code. xen_hypervisor_callback() was incorrectly pushing 0 for orig_ax instead of -1. Classic Xen kernels pushed %eax which works as %eax cannot be both non-negative and -RESTARTSYS (etc.), but using -1 is consistent with other non-system call entry points and avoids some of the tests in handle_signal(). There were similar bugs in xen_failsafe_callback() of both 32 and 64-bit guests. If the fault was corrected and the normal return path was used then 0 was incorrectly pushed as the value for orig_ax. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Jan Beulich <JBeulich@suse.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Cc: stable@vger.kernel.org Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-10-19Merge commit '5bc66170dc486556a1e36fd384463536573f4b82' into x86/urgentH. Peter Anvin
From Borislav Petkov <bp@amd64.org>: Below is a RAS fix which reverts the addition of a sysfs attribute which we agreed is not needed, post-factum. And this should go in now because that sysfs attribute is going to end up in 3.7 otherwise and thus exposed to userspace; removing it then would be a lot harder. This is done as a merge rather than a simple patch/cherry-pick since the baseline for this patch was not in the previous x86/urgent. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-10-19x86, MCE: Remove bios_cmci_threshold sysfs attributeBorislav Petkov
450cc201038f3 ("x86/mce: Provide boot argument to honour bios-set CMCI threshold") added the bios_cmci_threshold sysfs attribute which was supposed to communicate to userspace tools that BIOS CMCI threshold has been honoured. However, this info is not of any importance to userspace - it should rather get the actual error count it has been thresholded already from MCi_STATUS[38:52]. So drop this before it becomes a used interface (good thing we caught this early in 3.7-rc1, right after the merge window closed). Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/20121017105940.GA14590@x1.osrc.amd.com Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-10-17x86, amd, mce: Avoid NULL pointer reference on CPU northbridge lookupDaniel J Blueman
When booting on a federated multi-server system (NumaScale), the processor Northbridge lookup returns NULL; add guards to prevent this causing an oops. On those systems, the northbridge is accessed through MMIO and the "normal" northbridge enumeration in amd_nb.c doesn't work since we're generating the northbridge ID from the initial APIC ID and the last is not unique on those systems. Long story short, we end up without northbridge descriptors. Signed-off-by: Daniel J Blueman <daniel@numascale-asia.com> Cc: stable@vger.kernel.org # 3.6 Link: http://lkml.kernel.org/r/1349073725-14093-1-git-send-email-daniel@numascale-asia.com [ Boris: beef up commit message ] Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-10-17x86: Exclude E820_RESERVED regions and memory holes above 4 GB from direct ↵Jacob Shin
mapping. On systems with very large memory (1 TB in our case), BIOS may report a reserved region or a hole in the E820 map, even above the 4 GB range. Exclude these from the direct mapping. [ hpa: this should be done not just for > 4 GB but for everything above the legacy region (1 MB), at the very least. That, however, turns out to require significant restructuring. That work is well underway, but is not suitable for rc/stable. ] Cc: stable@kernel.org # > 2.6.32 Signed-off-by: Jacob Shin <jacob.shin@amd.com> Link: http://lkml.kernel.org/r/1319145326-13902-1-git-send-email-jacob.shin@amd.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-10-16perf: Require exclude_guest to use PEBS - kernel side enforcementPeter Zijlstra
Intel PEBS in VT-x context uses the DS address as a guest linear address, even though its programmed by the host as a host linear address. This either results in guest memory corruption and or the hardware faulting and 'crashing' the virtual machine. Therefore we have to disable PEBS on VT-x enter and re-enable on VT-x exit, enforcing a strict exclude_guest. This patch enforces exclude_guest kernel side. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Avi Kivity <avi@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Robert Richter <robert.richter@amd.com> Link: http://lkml.kernel.org/r/1347569955-54626-3-git-send-email-dsahern@gmail.com Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-10-13Merge tag 'for_linus-3.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb Pull KGDB/KDB fixes and cleanups from Jason Wessel: "Cleanups - Clean up compile warnings in kgdboc.c and x86/kernel/kgdb.c - Add module event hooks for simplified debugging with gdb Fixes - Fix kdb to stop paging with 'q' on bta and dmesg - Fix for data that scrolls off the vga console due to line wrapping when using the kdb pager New - The debug core registers for kernel module events which allows a kernel aware gdb to automatically load symbols and break on entry to a kernel module - Allow kgdboc=kdb to setup kdb on the vga console" * tag 'for_linus-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb: tty/console: fix warnings in drivers/tty/serial/kgdboc.c kdb,vt_console: Fix missed data due to pager overruns kdb: Fix dmesg/bta scroll to quit with 'q' kgdboc: Accept either kbd or kdb to activate the vga + keyboard kdb shell kgdb,x86: fix warning about unused variable mips,kgdb: fix recursive page fault with CONFIG_KPROBES kgdb: Add module event hooks
2012-10-13Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "This tree includes some late late perf items that missed the first round: tools: - Bash auto completion improvements, now we can auto complete the tools long options, tracepoint event names, etc, from Namhyung Kim. - Look up thread using tid instead of pid in 'perf sched'. - Move global variables into a perf_kvm struct, from David Ahern. - Hists refactorings, preparatory for improved 'diff' command, from Jiri Olsa. - Hists refactorings, preparatory for event group viewieng work, from Namhyung Kim. - Remove double negation on optional feature macro definitions, from Namhyung Kim. - Remove several cases of needless global variables, on most builtins. - misc fixes kernel: - sysfs support for IBS on AMD CPUs, from Robert Richter. - Support for an upcoming Intel CPU, the Xeon-Phi / Knights Corner HPC blade PMU, from Vince Weaver. - misc fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits) perf: Fix perf_cgroup_switch for sw-events perf: Clarify perf_cpu_context::active_pmu usage by renaming it to ::unique_pmu perf/AMD/IBS: Add sysfs support perf hists: Add more helpers for hist entry stat perf hists: Move he->stat.nr_events initialization to a template perf hists: Introduce struct he_stat perf diff: Removing the total_period argument from output code perf tool: Add hpp interface to enable/disable hpp column perf tools: Removing hists pair argument from output path perf hists: Separate overhead and baseline columns perf diff: Refactor diff displacement possition info perf hists: Add struct hists pointer to struct hist_entry perf tools: Complete tracepoint event names perf/x86: Add support for Intel Xeon-Phi Knights Corner PMU perf evlist: Remove some unused methods perf evlist: Introduce add_newtp method perf kvm: Move global variables into a perf_kvm struct perf tools: Convert to BACKTRACE_SUPPORT perf tools: Long option completion support for each subcommands perf tools: Complete long option names of perf command ...
2012-10-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal Pull third pile of kernel_execve() patches from Al Viro: "The last bits of infrastructure for kernel_thread() et.al., with alpha/arm/x86 use of those. Plus sanitizing the asm glue and do_notify_resume() on alpha, fixing the "disabled irq while running task_work stuff" breakage there. At that point the rest of kernel_thread/kernel_execve/sys_execve work can be done independently for different architectures. The only pending bits that do depend on having all architectures converted are restrictred to fs/* and kernel/* - that'll obviously have to wait for the next cycle. I thought we'd have to wait for all of them done before we start eliminating the longjump-style insanity in kernel_execve(), but it turned out there's a very simple way to do that without flagday-style changes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: alpha: switch to saner kernel_execve() semantics arm: switch to saner kernel_execve() semantics x86, um: convert to saner kernel_execve() semantics infrastructure for saner ret_from_kernel_thread semantics make sure that kernel_thread() callbacks call do_exit() themselves make sure that we always have a return path from kernel_execve() ppc: eeh_event should just use kthread_run() don't bother with kernel_thread/kernel_execve for launching linuxrc alpha: get rid of switch_stack argument of do_work_pending() alpha: don't bother passing switch_stack separately from regs alpha: take SIGPENDING/NOTIFY_RESUME loop into signal.c alpha: simplify TIF_NEED_RESCHED handling
2012-10-12x86, um: convert to saner kernel_execve() semanticsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-12Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer core update from Thomas Gleixner: - Bug fixes (one for a longstanding dead loop issue) - Rework of time related vsyscalls - Alarm timer updates - Jiffies updates to remove compile time dependencies * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Cast raw_interval to u64 to avoid shift overflow timers: Fix endless looping between cascade() and internal_add_timer() time/jiffies: bring back unconditional LATCH definition time: Convert x86_64 to using new update_vsyscall time: Only do nanosecond rounding on GENERIC_TIME_VSYSCALL_OLD systems time: Introduce new GENERIC_TIME_VSYSCALL time: Convert CONFIG_GENERIC_TIME_VSYSCALL to CONFIG_GENERIC_TIME_VSYSCALL_OLD time: Move update_vsyscall definitions to timekeeper_internal.h time: Move timekeeper structure to timekeeper_internal.h for vsyscall changes jiffies: Remove compile time assumptions about CLOCK_TICK_RATE jiffies: Kill unused TICK_USEC_TO_NSEC alarmtimer: Rename alarmtimer_remove to alarmtimer_dequeue alarmtimer: Remove unused helpers & defines alarmtimer: Use hrtimer per-alarm instead of per-base alarmtimer: Implement minimum alarm interval for allowing suspend
2012-10-12kgdb,x86: fix warning about unused variableJason Wessel
When compiling without CONFIG_DEBUG_RODATA the following compiler warning is generated: arch/x86/kernel/kgdb.c: In function 'kgdb_arch_set_breakpoint': arch/x86/kernel/kgdb.c:749: warning: unused variable 'opc' The variable instantiation needs to be inside the #ifdef to make the warning go away. Reported-by: Thiago Rafael Becker <trbecker@trbecker.org> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2012-10-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal Pull pile 2 of execve and kernel_thread unification work from Al Viro: "Stuff in there: kernel_thread/kernel_execve/sys_execve conversions for several more architectures plus assorted signal fixes and cleanups. There'll be more (in particular, real fixes for the alpha do_notify_resume() irq mess)..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: (43 commits) alpha: don't open-code trace_report_syscall_{enter,exit} Uninclude linux/freezer.h m32r: trim masks avr32: trim masks tile: don't bother with SIGTRAP in setup_frame microblaze: don't bother with SIGTRAP in setup_rt_frame() mn10300: don't bother with SIGTRAP in setup_frame() frv: no need to raise SIGTRAP in setup_frame() x86: get rid of duplicate code in case of CONFIG_VM86 unicore32: remove pointless test h8300: trim _TIF_WORK_MASK parisc: decide whether to go to slow path (tracesys) based on thread flags parisc: don't bother looping in do_signal() parisc: fix double restarts bury the rest of TIF_IRET sanitize tsk_is_polling() bury _TIF_RESTORE_SIGMASK unicore32: unobfuscate _TIF_WORK_MASK mips: NOTIFY_RESUME is not needed in TIF masks mips: merge the identical "return from syscall" per-ABI code ... Conflicts: arch/arm/include/asm/thread_info.h
generated by cgit v1.2.3 (git 2.46.0) at 2025-08-01 02:46:53 +0000