summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2013-05-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more vfs fixes from Al Viro: "Regression fix from Geert + yet another open-coded kernel_read()" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ecryptfs: don't open-code kernel_read() xtensa simdisk: Fix proc_create_data() conversion fallout
2013-05-09ARM: exynos: dts: Fixed vbus-gpiosDoug Anderson
The 'samsung,vbus-gpio' was submitted before pinmux landed for exynos5250 and uses the old-style gpio specifier. Fix the two exynos5250 boards that use it. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-05-09ARM: EXYNOS5: Fix kernel dump in AFTR idle modeInderpal Singh
The kernel crashes while resuming from AFTR idle mode. It happens because L2 cache was not going into retention state. This patch configures the USE_RETENTION bit of ARM_L2_OPTION register so that it does not depend on MANUAL_L2RSTDISABLE_CONTROL of ARM_COMMON_OPTION register for L2RSTDISABLE signal. Signed-off-by: Inderpal Singh <inderpal.singh@linaro.org> Tested-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-05-09Merge tag 'omap-for-v3.10/dt-fixes-for-merge-window' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: Omap device tree fixes for issue discovered during the merge window: - Fix triggering for GPIO interrupts that's needed for 4430sdp Ethernet. Otherwise booting with nfsroot won't work. - Fix CPU operating point values - Fix wrong assumption that twl PMIC is always connected to omap3 - Add gpmc for am33xx so beaglebone users can use the bus - Cosmetic fix for mcspi pin muxing to avoid confusion * tag 'omap-for-v3.10/dt-fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: don't assume boards are using twl4030 for omap3 ARM: dts: Configure and fix the McSPI pins for 4430sdp ARM: dts: AM33XX: Add GPMC node ARM: dts: OMAP4460: Fix CPU OPP voltages ARM: dts: OMAP36xx: Fix CPU OPP voltages ARM: dts: OMAP4: Fix ethernet IRQ for OMAP4 boards
2013-05-09Merge tag 'omap-for-v3.10/fixes-for-merge-window-part2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: Omap fixes for things that were discovered during the merge window: - Few GPMC fixes and binding doc updates noted after sending pull requests for the GPMC branch. - Board fixes for beagle usb host and rx51 spi probe order - SoC fixes dt earlyprintk, omap1 dma and omap2+ id.c error handling fixes Then few minor things that are not strictly fixes but are good to get out of the way: - Add missing legacy mux registers for am/dm73x gpio - Add detection for am33xx pg2.1 silicon - Enable twl4030 audio modules in defconfig * tag 'omap-for-v3.10/fixes-for-merge-window-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Remove bogus IS_ERR_OR_NULL checking from id.c ARM: OMAP4+: omap2plus_defconfig: Enable audio via TWL6040 as module ARM: OMAP2: AM33XX: id: Add support for new AM335x PG2.1 Si omap: mux: add AM/DM37x gpios ARM: OMAP1: DMA: fix error handling in omap1_system_dma_init() ARM: OMAP2+: omap_device: use late_initcall_sync ARM: OMAP: RX-51: change probe order of touchscreen and panel SPI devices ARM: OMAP3: Beagle: Fix USB Host on beagle xM Ax/Bx ARM: OMAP2+: only WARN if a GPMC child probe function fail ARM: OMAP2+: only search for GPMC DT child nodes on probe Documentation: dt: update properties in TI GPMC NAND example Documentation: dt: update TI GPMC ethernet binding properties Signed-off-by: Olof Johansson <olof@lixom.net>
2013-05-09ARM: ux500: Rid ignored return value of regulator_enable() compiler warningLee Jones
arch/arm/mach-ux500/board-mop500.c: In function ‘mop500_prox_activate’: arch/arm/mach-ux500/board-mop500.c:406:18: warning: ignoring return value of ‘regulator_enable’, declared with attribute warn_unused_result [-Wunused-result] Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-05-09ARM: ux500: read the correct soc_id numberFabio Baltieri
Fix db8500_read_soc_id() to read all five soc_id number locations instead of repeating the second one two times. Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-05-09ARM: exynos: dts: cros5250: add cyapa trackpadOlof Johansson
Trivial patch, adding the i2c Cypress trackpad used on Snow. Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09ARM: imx: Select GENERIC_ALLOCATORFabio Estevam
Since commit 657eee7 (media: coda: use genalloc API) the following build error happens with imx_v4_v5_defconfig: drivers/built-in.o: In function 'coda_remove': clk-composite.c:(.text+0x112180): undefined reference to 'gen_pool_free' drivers/built-in.o: In function 'coda_probe': clk-composite.c:(.text+0x112310): undefined reference to 'of_get_named_gen_pool' clk-composite.c:(.text+0x1123f4): undefined reference to 'gen_pool_alloc' clk-composite.c:(.text+0x11240c): undefined reference to 'gen_pool_virt_to_phys' clk-composite.c:(.text+0x112458): undefined reference to 'dev_get_gen_pool' Select GENERIC_ALLOCATOR and get rid of the custom IRAM_ALLOC. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-05-09ARM: imx: compile fix for hotplug.cShawn Guo
Commit bca7a5a (ARM: cpu hotplug: remove majority of cache flushing from platforms) removes include of <asm/cacheflush.h> and hence discovers a few indirect inclusion and declaration problems as below. CC arch/arm/mach-imx/hotplug.o In file included from arch/arm/mach-imx/hotplug.c:16:0: arch/arm/mach-imx/common.h:100:29: warning: ‘struct pt_regs’ declared inside parameter list [enabled by default] arch/arm/mach-imx/common.h:100:29: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] arch/arm/mach-imx/common.h:101:29: warning: ‘struct pt_regs’ declared inside parameter list [enabled by default] arch/arm/mach-imx/hotplug.c: In function ‘imx_cpu_die’: arch/arm/mach-imx/hotplug.c:53:2: error: implicit declaration of function ‘cpu_do_idle’ [-Werror=implicit-function-declaration] arch/arm/mach-imx/hotplug.c: In function ‘imx_cpu_kill’: arch/arm/mach-imx/hotplug.c:58:26: error: ‘jiffies’ undeclared (first use in this function) arch/arm/mach-imx/hotplug.c:58:26: note: each undeclared identifier is reported only once for each function it appears in arch/arm/mach-imx/hotplug.c:58:2: error: implicit declaration of function ‘msecs_to_jiffies’ [-Werror=implicit-function-declaration] arch/arm/mach-imx/hotplug.c:61:3: error: implicit declaration of function ‘time_after’ [-Werror=implicit-function-declaration] Fix them by adding the needed inclusion and declaration. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-05-09Merge branch 'late/fixes' into fixesOlof Johansson
* late/fixes: ARM: OMAP2+: Fix unmet direct dependencies for SERIAL_OMAP ARM: ux500: always select ABX500_CORE ARM: SIRF: select SMP_ON_UP only on SMP builds ARM: SPEAr: conditionalize l2x0 support ARM: imx: build CPU suspend code only when needed ARM: OMAP: build SMP code only for OMAP4/5 ARM: tegra: Tegra114 needs CPU_FREQ_TABLE ARM: default machine descriptor for multiplatform Signed-off-by: Olof Johansson <olof@lixom.net>
2013-05-09switch compat_sys_sysctl to COMPAT_SYSCALL_DEFINEAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-09unicore32: just use mmap_pgoff()...Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-09arch/tile: remove inline marking of EXPORT_SYMBOL functionsDenis Efremov
EXPORT_SYMBOL and inline directives are contradictory to each other. The patch fixes this inconsistency. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Denis Efremov <yefremov.denis@gmail.com> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-05-09unify compat fanotify_mark(2), switch to COMPAT_SYSCALL_DEFINEAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-09Merge tag 'pci-v3.10-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "MSI: PCI: Set ->mask_pos correctly Hotplug: PCI: Delay final fixups until resources are assigned Moorestown: x86/pci/mrst: Use configuration mechanism 1 for 00:00.0, 00:02.0, 00:03.0" * tag 'pci-v3.10-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Delay final fixups until resources are assigned x86/pci/mrst: Use configuration mechanism 1 for 00:00.0, 00:02.0, 00:03.0 PCI: Set ->mask_pos correctly
2013-05-09xtensa simdisk: Fix proc_create_data() conversion falloutGeert Uytterhoeven
arch/xtensa/platforms/iss/simdisk.c: In function 'proc_read_simdisk': arch/xtensa/platforms/iss/simdisk.c:220:12: warning: initialization discards 'const' qualifier from pointer target type [enabled by default] arch/xtensa/platforms/iss/simdisk.c: In function 'proc_write_simdisk': arch/xtensa/platforms/iss/simdisk.c:241:38: error: 'buffer' undeclared (first use in this function) arch/xtensa/platforms/iss/simdisk.c:241:38: note: each undeclared identifier is reported only once for each function it appears in Introduced by commit a69755b187749e7cc020e17127a54f395aea4eaa ("xtensa simdisk: switch to proc_create_data()") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-09Merge tag 'for-linus-20130509' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD update from David Woodhouse: - Lots of cleanups from Artem, including deletion of some obsolete drivers - Support partitions larger than 4GiB in device tree - Support for new SPI chips * tag 'for-linus-20130509' of git://git.infradead.org/linux-mtd: (83 commits) mtd: omap2: Use module_platform_driver() mtd: bf5xx_nand: Use module_platform_driver() mtd: denali_dt: Remove redundant use of of_match_ptr mtd: denali_dt: Change return value to fix smatch warning mtd: denali_dt: Use module_platform_driver() mtd: denali_dt: Fix incorrect error check mtd: nand: subpage write support for hardware based ECC schemes mtd: omap2: use msecs_to_jiffies() mtd: nand_ids: use size macros mtd: nand_ids: improve LEGACY_ID_NAND macro a bit mtd: add 4 Toshiba nand chips for the full-id case mtd: add the support to parse out the full-id nand type mtd: add new fields to nand_flash_dev{} mtd: sh_flctl: Use of_match_ptr() macro mtd: gpio: Use of_match_ptr() macro mtd: gpio: Use devm_kzalloc() mtd: davinci_nand: Use of_match_ptr() mtd: dataflash: Use of_match_ptr() macro mtd: remove h720x flash support mtd: onenand: remove OneNAND simulator ...
2013-05-09Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds
Pull removal of GENERIC_GPIO from Grant Likely: "GENERIC_GPIO now synonymous with GPIOLIB. There are no longer any valid cases for enableing GENERIC_GPIO without GPIOLIB, even though it is possible to do so which has been causing confusion and breakage. This branch does the work to completely eliminate GENERIC_GPIO." * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: gpio: update gpio Chinese documentation Remove GENERIC_GPIO config option Convert selectors of GENERIC_GPIO to GPIOLIB blackfin: force use of gpiolib m68k: coldfire: use gpiolib mips: pnx833x: remove requirement for GENERIC_GPIO openrisc: default GENERIC_GPIO to false avr32: default GENERIC_GPIO to false xtensa: remove explicit selection of GENERIC_GPIO sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB powerpc: remove redundant GENERIC_GPIO selection unicore32: default GENERIC_GPIO to false unicore32: remove unneeded select GENERIC_GPIO arm: plat-orion: use GPIO driver on CONFIG_GPIOLIB arm: remove redundant GENERIC_GPIO selection mips: alchemy: require gpiolib mips: txx9: change GENERIC_GPIO to GPIOLIB mips: loongson: use GPIO driver on CONFIG_GPIOLIB mips: remove redundant GENERIC_GPIO select
2013-05-09Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine updates from Vinod Koul: "This time we have dmatest improvements from Andy along with dw_dmac fixes. He has also done support for acpi for dmanegine. Also we have bunch of fixes going in DT support for dmanegine for various folks. Then Haswell and other ioat changes from Dave and SUDMAC support from Shimoda." * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (53 commits) dma: tegra: implement suspend/resume callbacks dma:of: Use a mutex to protect the of_dma_list dma: of: Fix of_node reference leak dmaengine: sirf: move driver init from module_init to subsys_initcall sudmac: add support for SUDMAC dma: sh: add Kconfig at_hdmac: move to generic DMA binding ioatdma: ioat3_alloc_sed can be static ioatdma: Adding write back descriptor error status support for ioatdma 3.3 ioatdma: S1200 platforms ioatdma channel 2 and 3 falsely advertise RAID cap ioatdma: Adding support for 16 src PQ ops and super extended descriptors ioatdma: Removing hw bug workaround for CB3.x .2 and earlier dw_dmac: add ACPI support dmaengine: call acpi_dma_request_slave_channel as well dma: acpi-dma: introduce ACPI DMA helpers dma: of: Remove unnecessary list_empty check DMA: OF: Check properties value before running be32_to_cpup() on it DMA: of: Constant names ioatdma: skip silicon bug workaround for pq_align for cb3.3 ioatdma: Removing PQ val disable for cb3.3 ...
2013-05-09ARC: [mm] Aliasing VIPT dcache support 4/4Vineet Gupta
Enforce congruency of userspace shared mappings Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-09ARC: [mm] Aliasing VIPT dcache support 3/4Vineet Gupta
Fix the one zillion warnings Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-09ARC: [mm] Aliasing VIPT dcache support 2/4Vineet Gupta
This is the meat of the series which prevents any dcache alias creation by always keeping the U and K mapping of a page congruent. If a mapping already exists, and other tries to access the page, prev one is flushed to physical page (wback+inv) Essentially flush_dcache_page()/copy_user_highpage() create K-mapping of a page, but try to defer flushing, unless U-mapping exist. When page is actually mapped to userspace, update_mmu_cache() flushes the K-mapping (in certain cases this can be optimised out) Additonally flush_cache_mm(), flush_cache_range(), flush_cache_page() handle the puring of stale userspace mappings on exit/munmap... flush_anon_page() handles the existing U-mapping for anon page before kernel reads it via the GUP path. Note that while not complete, this is enough to boot a simple dynamically linked Busybox based rootfs Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-09ARC: [mm] Aliasing VIPT dcache support 1/4Vineet Gupta
This preps the low level dcache flush helpers to take vaddr argument in addition to the existing paddr to properly flush the VIPT dcache Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-09ARM: dts: don't assume boards are using twl4030 for omap3Jason Cooper
If a board isn't using twl4030, then dtc will complain about the missing phandle (which is in twl4030.dtsi). Move the phy declaration to the dts files. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-05-09ARM: OMAP2+: Remove bogus IS_ERR_OR_NULL checking from id.cTony Lindgren
Commit 6770b211 (ARM: OMAP2+: Export SoC information to userspace) had some broken return value handling as noted by Russell King: + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR_OR_NULL(soc_dev)) { + kfree(soc_dev_attr); + return; + } + + parent = soc_device_to_device(soc_dev); + if (!IS_ERR_OR_NULL(parent)) + device_create_file(parent, &omap_soc_attr); This is nonsense. For the first, IS_ERR() is sufficient. For the second, tell me what error checking is required in the return value of this function: struct device *soc_device_to_device(struct soc_device *soc_dev) { return &soc_dev->dev; } when you've already determined that the passed soc_dev is a valid pointer. If you read the comments against the prototype: /** * soc_device_to_device - helper function to fetch struct device * @soc: Previously registered SoC device container */ struct device *soc_device_to_device(struct soc_device *soc); if "soc" is valid, it means the "previously registered SoC device container" must have succeeded and that can only happen if the struct device has been registered. Ergo, there will always be a valid struct device pointer for any registered SoC device container. Therefore, if soc_device_register() succeeds, then the return value from soc_device_to_device() will always be valid and no error checking of it is required. Simples. The rule as ever applies here: get to know the APIs your using and don't fumble around in the dark hoping that you'll get this stuff right. Fix it as noted by Russell. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-05-09Merge branch 'mti-next' of ↵Ralf Baechle
git://git.linux-mips.org/pub/scm/sjhill/linux-sjhill into mips-for-linux-next
2013-05-09Merge branch 'next/kvm' into mips-for-linux-nextRalf Baechle
2013-05-09MIPS: Add new GIC clockevent driver.Raghu Gandham
Add new clockevent driver that uses the counter present on the MIPS Global Interrupt Controller. Signed-off-by: Raghu Gandham <Raghu.Gandham@imgtec.com> Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: Formatting clean-ups for clocksources.Steven J. Hill
Various whitespace and #ifdef removals for GIC and R4K clocksources. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: Refactor GIC clocksource code.Steven J. Hill
Reorganize some of the GIC clocksource driver code. Below is a list of the various changes. * No longer select CSRC_GIC by default for Malta platform. * Limit choice for either the GIC or R4K clocksource, not both. * Change location in Makefile. * Created new 'gic_read_count' function in common 'irq-gic.c' file. * Change 'git_hpt_read' function in 'csrc-gic.c' to use new function. * Surround GIC specific code in Malta platform code with #ifdef's. * Only initialize the GIC clocksource if it was selected. Original code called it unconditionally if a GIC was found. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: Move 'gic_frequency' to common location.Steven J. Hill
Move the global variable 'gic_frequency' to be defined in the file 'arch/mips/kernel/irq-gic.c' instead of defining it individually for each platform making use of the GIC. Also change the type to be an unsigned integer instead of signed. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: Move 'gic_present' to common location.Steven J. Hill
Move the global variable 'gic_present' to be defined in the file 'arch/mips/kernel/irq-gic.c' instead of defining it individually for each platform making use of the GIC. Also change the type to be an unsigned integer instead of signed. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: MIPS16e: Add unaligned access support.Steven J. Hill
Add logic needed to handle unaligned accesses in MIPS16e mode. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
2013-05-09MIPS: MIPS16e: Support handling of delay slots.Steven J. Hill
Add logic needed to properly calculate exceptions for delay slots when in MIPS16e mode. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: MIPS16e: Add instruction formats.Steven J. Hill
Add structures for all the MIPS16e instructions. Also add the enumerations for all the bit fields for opcodes, functions, etc. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: microMIPS: Optimise 'strnlen' core library function.Steven J. Hill
Optimise 'strnlen' to use microMIPS instructions and/or optimisations for binary size reduction. When the microMIPS ISA is not being used, the library function compiles to the original binary code. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: microMIPS: Optimise 'strlen' core library function.Steven J. Hill
Optimise 'strlen' to use microMIPS instructions and/or optimisations for binary size reduction. When the microMIPS ISA is not being used, the library function compiles to the original binary code. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: microMIPS: Optimise 'strncpy' core library function.Steven J. Hill
Optimise 'strncpy' to use microMIPS instructions and/or optimisations for binary size reduction. When the microMIPS ISA is not being used, the library function compiles to the original binary code. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: microMIPS: Optimise 'memset' core library function.Steven J. Hill
Optimise 'memset' to use microMIPS instructions and/or optimisations for binary size reduction. When the microMIPS ISA is not being used, the library function compiles to the original binary code. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: microMIPS: Add configuration option for microMIPS kernel.Steven J. Hill
This adds the option to build the Linux kernel using only the microMIPS ISA. The resulting kernel binary is, at a minimum, 20% smaller than using the MIPS32R2 ISA. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: microMIPS: Disable LL/SC and fix linker bug.Steven J. Hill
Partially revert commit e0c14a260d66ba35935600d6435940a566fe806b and turn off LL/SC when building a pure microMIPS kernel. This is a temporary fix until the cmpxchg assembly macro functions are re-written to not use the HI/LO registers in address calculations. Also add .insn in selected user access functions which would otherwise produce ISA mode jump incompatibilities. This is also a temporary fix. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: microMIPS: Add vdso support.Douglas Leung
Support vdso in microMIPS mode. Signed-off-by: Douglas Leung <Douglas.Leung@imgtec.com> Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: microMIPS: Add unaligned access support.Leonid Yegoshin
Add logic needed to handle unaligned accesses in microMIPS mode. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
2013-05-09MIPS: microMIPS: Support handling of delay slots.Leonid Yegoshin
Add logic needed to properly calculate exceptions for delay slots when in microMIPS mode. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: microMIPS: Add support for exception handling.Steven J. Hill
All exceptions must be taken in microMIPS mode, never in classic MIPS mode or the kernel falls apart. A few NOP instructions are used to maintain the correct alignment of microMIPS versions of the exception vectors. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: microMIPS: Floating point support.Leonid Yegoshin
Add logic needed to do floating point emulation in microMIPS mode. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Steven J. Hill <Steven. Hill@imgtec.com>
2013-05-09MIPS: microMIPS: Fix macro naming in micro-assembler.Steven J. Hill
The macros did not properly take into account the ISA that the kernel was being compiled with. A classic MIPS kernel will have the standard 'uasm_i_##op' macro functions with 'MM_uasm_i_##op' macro functions for the microMIPS version. A pure microMIPS kernel will have the standard macros with 'CL_uasm_i_##op' macro functions for the classic version. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: microMIPS: Fix incorrect mask for jump immediate.Steven J. Hill
Jump or branch target addresses have the first bit set. The original mask did not take this into account and will cause a field overflow warning for the target address when a jump immediate instruction is built. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09KVM/MIPS32: Binary patching of select privileged instructions.Sanjay Lal
Currently, the following instructions are translated: - CACHE (indexed) - CACHE (va based): translated to a SYNCI, overkill on D-CACHE operations, but still much faster than a trap. - mfc0/mtc0: the virtual COP0 registers for the guest are implemented as 2-D array. [COP#][SEL] and this is mapped into the guest kernel address space @ VA 0x0. mfc0/mtc0 operations are transformed to load/stores. Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-29 18:25:51 +0000