summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/amdgpu
AgeCommit message (Collapse)Author
2016-07-07drm/amd/gfx: add instance field to select_se_sh (v3)Tom St Denis
Add ability to specify instance in select_se_sh callback. Defaults to 0xffffffff all over the driver. (v2) Don't enable INSTANCE_BROADCAST by default (v3) Style changes Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: Poll for both connect/disconnect on analog connectorsLyude
DRM_CONNECTOR_POLL_CONNECT only enables polling for connections, not disconnections. Because of this, we end up losing hotplug polling for analog connectors once they get connected. Easy way to reproduce: - Grab a machine with an AMD GPU and a VGA port - Plug a monitor into the VGA port, wait for it to update the connector from disconnected to connected - Disconnect the monitor on VGA, a hotplug event is never sent for the removal of the connector. Originally, only using DRM_CONNECTOR_POLL_CONNECT might have been a good idea since doing VGA polling can sometimes result in having to mess with the DAC voltages to figure out whether or not there's actually something there since VGA doesn't have HPD. Doing this would have the potential of showing visible artifacts on the screen every time we ran a poll while a VGA display was connected. Luckily, amdgpu_vga_detect() only resorts to this sort of polling if the poll is forced, and DRM's polling helper doesn't force it's polls. Additionally, this removes some assignments to connector->polled that weren't actually doing anything. Cc: stable@vger.kernel.org Signed-off-by: Lyude <cpaul@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: stop/resume fb access when gpu reset V3Chunming Zhou
V2: Add wait_for_mc_idle after stopping fb access V3: 1. Remove resume fb access since there is no need to do that for gpu reset. 2. Move stop fb access to amdgpu_gpu_reset function, since it's the same for all asics. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> (V1) Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: must update page table after gpu resetChunming Zhou
Record the gpu reset count in vmid to identify if gpu reset happened. Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: save/restore bios scratch when gpu resetChunming Zhou
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: must update page table after gpu resetChunming Zhou
Record the gpu reset count in vmid to identify if gpu reset happened. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amd/amdgpu: Set DRIVER_MODESET feature flag at build timeFrank Binns
This flag was being set unconditionally at runtime so just set it at compile time instead. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Frank Binns <frank.binns@imgtec.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: Unpin BO if we can't get fences in amdgpu_crtc_page_flipMichel Dänzer
If reservation_object_get_fences_rcu failed, we'd previously go directly to the cleanup label, so we'd leave the BO pinned. While we're at it, remove two amdgpu_bo_unreserve calls in favour of two new labels. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu/gmc7: remove duplicate wait_for_idle functionsAlex Deucher
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu/gmc8: remove duplicate wait_for_idle functionsAlex Deucher
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu/dce8: fix flash with white screen on monitorJunwei Zhang
Fixed mc stop and resume hardware programming sequence. Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: skip invalid ip blocks in ip helpersAlex Deucher
Skip IP blocks that are not enabled. Reviewed-by: Chunming zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: add missing breaksAlex Deucher
Saves a few CPU cycles. Reviewed-by: Chunming zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: add IP helpers for wait_for_idle and is_idleAlex Deucher
Helpers to to call the IP functions for the selected IP. Reviewed-by: Chunming zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu/dce11: update async flip update timeAlex Deucher
Use UPDATE_IMMEDIATE (update on next data request boundary) rather than UPDATE_H_RETRACE (update on next line boundary). The data request boundary is less than a scanline, so it update will happen sooner. Cc: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: don't update page tables for VM emulationChristian König
It's just overhead to do so and allocating a VMID when we don't need one is actually a bit dangerous. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: implement HDP functions for UVD v2Christian König
Flush and invalidate the HDP caches. v2: fix typo in comment Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: change pcie_gen_cap magic code to macroHuang Rui
This patch changes pcie_gen_cap magic code to macro to make it more readable. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Cc: Eric Huang <JinHuiEric.Huang@amd.com> Cc: Ken Wang <Qingqing.Wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu/gfx7: make gfx_v7_0_rlc_stop staticAlex Deucher
Not used outside of gfx7. Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu/gfx7: switch to using the existing rlc callbacksAlex Deucher
gfx8 already uses them. Remove the direct exports and use the callbacks fpr gfx7. Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: move select_se_sh into the gfx structAlex Deucher
It's gfx IP specific, not asic specific, so move to a gfx callback. Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: move get_gpu_clock_counter into the gfx structAlex Deucher
It's gfx IP specific, not asic specific, so move to a gfx callback. Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: drop wait_for_mc_idle asic callbackAlex Deucher
Only used in the gmc IP modules so just call the local function directly. Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu/gmc: make some functions staticAlex Deucher
These are not used outside of the respective gmc ip modules. Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: validate VM PTs only on evictionChristian König
We don't need to validate them again if the eviction counter didn't changed. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: add eviction counterChristian König
Keep track of the number of evictions since boot. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: add amdgpu_irq_gpu_reset_resume_helperChunming Zhou
irq need to update when gpu reset happens. Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> Reviewed-by: Christian König christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amd/amdgpu: make sure VCE is disabled by defaultArindam Nath
With the current code, when we boot with the amdgpu driver enabled and loaded, the VCE also automatically remains enabled since bootup. This can be verified from the output of amdgpu_pm_info. It does not matter whether we boot into command line directly or into X, the VCE stays enabled the entire time. This patch addresses the issue and makes sure that VCE is turned on only during playback, and remains disaled otherwise. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: disable compute pipeline sync workaround when using fixed fwAlex Deucher
No need to stall the pipe when we are using firmware with the fix. Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu/gfx8: set USER_SHADER_ARRAY_CONFIG based on disable_cu parameterNicolai Hähnle
v2: do not overwrite register when bitmap is zero Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu/gfx7: set USER_SHADER_ARRAY_CONFIG based on disable_cu parameterNicolai Hähnle
v2: do not overwrite register when bitmap is zero Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: add disable_cu parameterNicolai Hähnle
This parameter will allow disabling individual CUs on module load, e.g. amdgpu.disable_cu=2.0.3,2.0.4 to disable CUs 3 and 4 of SE2. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: evict vram when gpu resetChunming Zhou
On workstation cards with ECC vram, the entirety of vram is cleared to 0 on asic init to set the ECC status correctly. On non ECC boards, I don't think they do any explicit clearing, but the vram controller is reset which may cause issues with the data there. Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: block scheduler when gpu resetChunming Zhou
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: pipeline evictions as wellChristian König
This boosts Xonotic from 38fps to 47fps when artificially limiting VRAM to 256MB for testing. It should improve all CPU bound rendering situations where we have a lot of swapping to/from VRAM. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: save the PD addr before scheduling the jobChristian König
When we pipeline evictions the page directory could already be moving somewhere else when grab_id is called. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/ttm: remove no_gpu_wait param from ttm_bo_move_accel_cleanupChristian König
It isn't used and not waiting for the GPU after scheduling a move is actually quite dangerous. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: remove pre move waitChristian König
Not needed any more. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: sync to buffer moves before VM updatesChristian König
Otherwise we could update the VM page tables while the move is only scheduled. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/ttm: wait for BO idle in ttm_bo_move_memcpyChristian König
When we want to pipeline accelerated moves we need to wait in the fallback path. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/ttm: add wait for idle in all drivers bo_move functionsChristian König
Wait for idle before moving the BO in all drivers implementing an accelerated move function. This should keep the current behavior when removing the pre move wait. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: some improvement in parsing inputsEric Huang
It changes the way to skip newline character and also avoids warning message from some compiler. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: introduce a firmware debugfs to dump all current firmware versionsHuang Rui
This patch implements the debugfs to dump all currect firmware version: root@jenkins-All-Series:/home/jenkins# cat /sys/kernel/debug/dri/0/amdgpu_firmware_info VCE feature version: 0, firmware version: 0x34040300 UVD feature version: 0, firmware version: 0x01451000 MC feature version: 0, firmware version: 0x00000000 ME feature version: 37, firmware version: 0x00000093 PFP feature version: 37, firmware version: 0x000000da CE feature version: 37, firmware version: 0x00000080 RLC feature version: 1, firmware version: 0x0000010e MEC feature version: 37, firmware version: 0x0000029e MEC2 feature version: 37, firmware version: 0x0000029e SMC feature version: 0, firmware version: 0x013353e6 SDMA0 feature version: 31, firmware version: 0x00000036 SDMA1 feature version: 0, firmware version: 0x00000036 Suggested-by: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: factor out the AMDGPU_INFO_FW_VERSION case branch into ↵Huang Rui
amdgpu_firmware_info The new amdgpu_firmware_info function will be used on amdgpu firmware version debugfs. Suggested-by: Christian König <christian.koenig@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: remove cgs_acpi_method_argument member method_lengthNicolai Hähnle
It was redundant with data_length, and in fact set incorrectly in one case leading to an out-of-bound read by memcpy in acpi_ut_copy_esimple_to_isimple, reported by CONFIG_KASAN=y. Signed-off-by: Nicolai Hähnle <Nicolai.Haehnle@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amd/powerplay: set UVD clocks bypass mode for Polaris10Eric Huang
Saves power when not in use. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu/gfx7: fix CP jump table sizeAlex Deucher
Align to the jump table offset. May fix hangs on some asics with GFX PG enabled. Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Acked-by: Tom St Denis <tom.stdenis@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu/gfx8: fix CP jump table sizeAlex Deucher
Align to the jump table offset. Fixes hangs on some systems with GFX PG enabled. Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Tested-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by: Tom St Denis <tom.stdenis@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amd/amdgpu : adding new tracepoints to track memory information.David Mao
- adding amdgpu_cs_bo_status to track total size and total entry count of bo for each submission. - adding amdgpu_ttm_bo_move to track the bo eviction including the size of bo and the location before/after the move Signed-off-by: David Mao <David.Mao@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amd/amdgpu : Refine tracepoints to track more informationDavid Mao
- adding memory type, prefered heap, allowed heap, and host visible information to the amdgpu_bo_create tracepoint. - adding bo size to the amdgpu_bo_list_set tracepoint. Signed-off-by: David Mao <David.Mao@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-08-01 04:16:16 +0000