summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd
AgeCommit message (Collapse)Author
2017-03-29drm/amdgpu: change pointer of mqd_ptr & mqd_backup to voidXiangliang Yu
vi_mqd is only used by VI family but mqd_ptr and mqd_backup is common for all ASIC, so change the pointer to void. Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Monk Liu <Monk.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu:fix kiq_resume routine (V2)Monk Liu
v2: use in_rest to fix compute ring test failure issue which occured after FLR/gpu_reset. we need backup a clean status of MQD which was created in drv load stage, and use it in resume stage, otherwise KCQ and KIQ all may faild in ring/ib test. Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu:use clear_ring to clr RBMonk Liu
In resume routine, we need clr RB prior to the ring test of engine, otherwise some engine hang duplicated during GPU reset. Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu:imple ring clearMonk Liu
we can use it clear ring buffer instead of fullfill 0, which is not correct for engine Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu:alloc mqd backupMonk Liu
this is required for restoring the mqds after GPU reset. Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu:new field in_reset introduced for gfxMonk Liu
use it to seperate driver load and gpu reset/resume because gfx IP need different approach for different hw_init trigger source Signed-off-by: Monk Liu <Monk.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu:RUNTIME flag should clr laterMonk Liu
this flag will get cleared by request gpu access Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu:use work instead of delay-workMonk Liu
no need to use a delay work since we don't know how much time hypervisor takes on FLR, so just polling and waiting in a work. Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu:no kiq for mailbox registers accessMonk Liu
Use no kiq version reg access due to: 1) better performance 2) INTR context consideration (some routine in mailbox is in INTR context e.g.xgpu_vi_mailbox_rcv_irq) Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu:Refine handshake of mailboxKen Xue
Signed-off-by: Ken Xue <Ken.Xue@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu:impl RREG32 no kiq versionMonk Liu
some registers are PF & VF copy, and we can safely use mmio method to access them. and sometime we are forbid to use kiq to access registers for example in INTR context. we need a MACRO that always disable KIQ for regs accessing Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu:use MACRO like other placesMonk Liu
Change-Id: Ica8f86577a50d817119de4b4fb95068dc72652a9 Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu: simplify reservation handling during buffer creationNicolai Hähnle
By using ttm_bo_init_reserved instead of the manual initialization of the reservation object, the reservation lock will be properly unlocked and destroyed when the TTM BO initialization fails. Actual deadlocks caused by the missing unlock should have been fixed by "drm/ttm: never add BO that failed to validate to the LRU list", superseding the flawed fix in commit 38fc4856ad98 ("drm/amdgpu: fix a potential deadlock in amdgpu_bo_create_restricted()"). This change fixes remaining recursive locking errors that can be seen with lock debugging enabled, and avoids the error of freeing a locked mutex. As an additional minor bonus, buffers created with resv == NULL and the AMDGPU_GEM_CREATE_VRAM_CLEARED flag are now only added to the global LRU list after the fill commands have been issued. v2: use amdgpu_bo_unreserve instead of ttm_bo_unreserve Fixes: 12a852219583 ("drm/amdgpu: improve AMDGPU_GEM_CREATE_VRAM_CLEARED handling (v2)") Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29Revert "drm/amdgpu: fix a potential deadlock in amdgpu_bo_create_restricted()"Nicolai Hähnle
This reverts commit 38fc4856ad98f230bc91da0421dec69e4aee40f8, which introduces a use-after-free. The underlying bug should be properly fixed with "drm/ttm: never add BO that failed to validate to the LRU list". Cc: zhoucm1 <david1.zhou@amd.com> Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Tested-by: Samuel Pitoiset <samuel.pitoiset@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu: expose GPU sensor related informationAlex Deucher
This includes shader/memory clocks, temperature, GPU load, etc. v2: - add sub-queries for AMDPGU_INFO_GPU_SENSOR_* - do not break the ABI v3: - return -ENOENT when amdgpu_dpm == 0 - expose more sensor queries v4: - s/GPU_POWER/GPU_AVG_POWER/ - improve VDDNB/VDDGFX query description - fix amdgpu_dpm check v5: - agd: fix warning v6: - agd: bump version Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu: expose amdgpu_sensors on pre-powerplay chipsSamuel Pitoiset
read_sensor() has been recently implemented for dpm based boards which means amdgpu_sensors can now be exposed. v2: - make sure read_sensor is not NULL on dpm chips - keep sanity check for powerplay chips v3: - make sure amdgpu_dpm != 0 Cc: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Tom St Denis <tom.stdenis@amd.com> Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu: implement read_sensor() for pre-powerplay chipsSamuel Pitoiset
Add the GPU temperature, the shader clock and eventually the memory clock (as well as the GPU load on CI). The main goal is to expose this info to the userspace like Radeon. v2: - add AMDGPU_PP_SENSOR_GPU_LOAD on CI - update the commit description Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu: fix PRT teardown on VM fini v3Christian König
v2: new approach fixing this by registering a fence callback for all users of the VM on teardown v3: agd: rebase Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu: add OOM fallback on PRT teardown (v2)Christian König
Don't assume kmalloc will always succeed. v2: agd: rebase Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu: minor PRT turnoff fix (v2)Christian König
When two VMs stop using PRT support at the same time we might not disable it in the right order otherwise. v2: agd: rebase Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu: change pte definitions to 64 bitAlex Xie
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Xie <AlexBin.Xie@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu: fix PTE definesChristian König
Those should be 64bit, even on a 32bit system. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amd/amdgpu: Update read_sensor calls to have size parameter (v3)Tom St Denis
This update allows sensors to return more than 1 value and indicates to the caller how many bytes are written. The debugfs interface has been updated to handle reading all of the values. Simply seek to the enum value (multiplied by 4) and then read as many bytes as the sensor provides. (v2): Don't set size to 4 before reading GPU_POWER (v3): agd: rebase Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu: implement PRT for GFX8 v2Christian König
Enable/disable the handling globally for now and print a warning when we enable it for the first time. v2: set correct register Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu: implement PRT for GFX7 v2Christian König
Enable/disable the handling globally for now and print a warning when we enable it for the first time. v2: set correct register Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu: implement PRT for GFX6 v2Christian König
Enable/disable the handling globally for now and print a warning when we enable it for the first time. v2: write to the correct register, adjust bits to that hw generation v3: fix compilation, add the missing register bit definitions Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu: IOCTL interface for PRT support v4Junwei Zhang
Till GFX8 we can only enable PRT support globally, but with the next hardware generation we can do this on a per page basis. Keep the interface consistent by adding PRT mappings and enable support globally on current hardware when the first mapping is made. v2: disable PRT support delayed and on all error paths v3: PRT and other permissions are mutal exclusive, PRT mappings don't need a BO. v4: update PRT mappings durign CS as well, make va_flags 64bit Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu: add basic PRT support (v2)Christian König
Future hardware generations can handle PRT flags on a per page basis, but current hardware can only turn it on globally. Add the basic handling for both, a global callback to enable/disable triggered by setting a per mapping flag. v2: agd: rebase fixes Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu: add support for BO_VAs without BO v2Christian König
For PRT support we need mappings which aren't backed by any memory. v2: fix parameter checking Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu:use hw_init for sriov_gpu_resetMonk Liu
no suspend invoked so after VF FLR by host, we just call hw_init to reinitialize IPs. Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amd/powerplay: implement gpu power display for smu7_hwmgrEric Huang
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amd/powerplay: add power consumption display support in debugfsEric Huang
The additional output are: vddc power in Watt; vddci power in Watt; max gpu power in Watt; average gpu power in Watt. Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amd/powerplay: change parameter type pointer from int32_t to void in ↵Eric Huang
read sensor As well as fix print format for uint32_t type. Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amd/amdgpu: add power profile support for CIEric Huang
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Acked-by: Rex Zhu <Rex.Zhu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amd/powerplay: add power profile support for PolarisEric Huang
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Acked-by: Rex Zhu <Rex.Zhu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amd/powerplay: add power profile support for FijiEric Huang
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Acked-by: Rex Zhu <Rex.Zhu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amd/powerplay: add power profile support for tongaEric Huang
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Acked-by: Rex Zhu <Rex.Zhu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amd/powerplay: add power profile support for SMU7Eric Huang
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Acked-by: Rex Zhu <Rex.Zhu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amd/powerplay: reapply power profile when force dpm level to autoEric Huang
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Acked-by: Rex Zhu <Rex.Zhu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amd/amdgpu: add power profile sysfs entryEric Huang
Add the sysfs entries pp_gfx_power_profile and pp_compute_power_profile which give user a way to set power profile through parameters minimum sclk, minimum mclk, activity threshold, up hysteresis and down hysteresis only when the entry power_dpm_force_performance_level is in default value "auto". It is read and write. Example: echo 500 800 20 0 5 > /sys/class/drm/card0/device/pp_*_power_profile cat /sys/class/drm/card0/device/pp_*_power_profile 500 800 20 0 5 Note: first parameter is sclk in MHz, second is mclk in MHz, third is activity threshold in percentage, fourth is up hysteresis in ms and fifth is down hysteresis in ms. echo set > /sys/class/drm/card0/device/pp_*_power_profile To set power profile state if it exists. echo reset > /sys/class/drm/card0/device/pp_*_power_profile To restore default state and clear previous setting. Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Acked-by: Rex Zhu <Rex.Zhu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu:cleanup no needed bracesMonk Liu
Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu:don't return error for debugfs failedMonk Liu
Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu:add lock_reset for SRIOVMonk Liu
this lock is used for sriov_gpu_reset, only get this mutex can run into sriov_gpu_reset. we have couple source triggers gpu_reset for SRIOV: 1) submit timedout and trigger reset voluntarily 2) invalid instruction detected by ENGINE and trigger reset voluntarily 2) hypervisor found world switch hang and trigger flr and notify guest to do reset. all need take care and we need a mutex to protect the consistency of reset routine. Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu:change kiq lock nameMonk Liu
Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu:implement SRIOV gpu_reset (v2)Monk Liu
implement SRIOV gpu_reset for future use. it wil be called from: 1) job timeout 2) privl access or instruction error interrupt 3) hypervisor detect VF hang v2: agd: rebase on upstream Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu:divide KCQ mqd init to sw and hwMonk Liu
sw part only invoked once during sw_init. hw part invoked during first drv load and resume later. that way we cannot alloc mqd in hw/resume, we only keep mqd allocted in sw_init routine. and hw_init routine only kmap and set it. Signed-off-by: Monk Liu <Monk.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu:minor cleanupMonk Liu
Signed-off-by: Monk Liu <Monk.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu:no need use sriov vf checksMonk Liu
We ultimately want to re-use this for bare metal, so no need to have vf checks in the KIQ code itself since kiq itself is currently only used in VF cases. Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu:bo_free_kernel will set ptr to NULL if freedMonk Liu
Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu:imple mqd soft ini/finiMonk Liu
this is for SRIOV fix: mqd soft init/fini will be invoked by sw_init to allocate BO for compute MQD resource, instead of original scheme that hw_init allocates MQD. because if hw_init allocates MQD, then resume will allocate MQD, and that lead to memory leak after driver recovered from hang. Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-20 06:16:06 +0000