summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2017-03-29drm/amdgpu: check function points valid before use. (v3)Rex Zhu
v2: agd: integrate Christian's comments. v3: print error message if call fails Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu: add a callback to set vm mapping flagsAlex Xie
This lets each asic set whichever flags it supports. Signed-off-by: Alex Xie <AlexBin.Xie@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu: set GART PTE asic specific flagsAlex Xie
Set asic specific gart pte flags in the gmc IP module for each asic. Signed-off-by: Alex Xie <AlexBin.Xie@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu: add a ucode size member into firmware infoHuang Rui
This will be used for newer asics. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu: expand pte flags to uint64_tChunming Zhou
Necessary for new asics. Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu/ih: store the full context idAlex Deucher
The contextID field (formerly known as src_data) of the IH vector stores client specific information about an interrupt. It was expanded from 32 bits to 128 on newer asics. Expand the src_id field to handle this. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu: switch ih handling to two levels (v3)Alex Deucher
Newer asics have a two levels of irq ids now: client id - the IP src id - the interrupt src within the IP v2: integrated Christian's comments. v3: fix rebase fail in SI and CIK Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Ken Wang <Qingqing.Wang@amd.com> Reviewed-by: Ken Wang <Qingqing.Wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu: add 64bit doorbell functions (v2)Ken Wang
Newer asics need 64 bit doorbells. v2: fix comment (Nils) Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Ken Wang <Qingqing.Wang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu: add 64bit wb functionsKen Wang
Newer asics need 64 bit writeback slots. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Ken Wang <Qingqing.Wang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu: change wptr to 64 bits (v2)Ken Wang
Newer asics need 64 bit wptrs. If the wptr is now smaller than the rptr that doesn't indicate a wrap-around anymore. v2: integrate Christian's comments. Signed-off-by: Ken Wang <Qingqing.Wang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu: init aperture definitions (v2)Junwei Zhang
v2: agd: move apertures to mc structure Signed-off-by: Flora Cui <Flora.Cui@amd.com> Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu: Merge pre/postclose hooksDaniel Vetter
Again no apparent explanation for the split except hysterical raisins. Merging them also makes it a bit more obviuos what's going on wrt the runtime pm refdancing. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: amd-gfx@lists.freedesktop.org Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/radeon: Merge pre/postclose hooksDaniel Vetter
Again no apparent explanation for the split except hysterical raisins. Merging them also makes it a bit more obviuos what's going on wrt the runtime pm refdancing. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: amd-gfx@lists.freedesktop.org Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu: trace fence details in amdgpu_sched_run_jobAndres Rodriguez
This information is intended to provide the required data to associate amdgpu tracepoints with their corresponding dma_fence_* events. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Andres Rodriguez <andresx7@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu: make trace format uniform csv name=valueAndres Rodriguez
Most of the traces have uniform format except for two of them. Having all the traces match makes it simple to run awk on the ftrace output. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Andres Rodriguez <andresx7@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu/gfx8: move CE&DE meta data structure to vi_structs.hXiangliang Yu
Because different HWs have different definition for CE & DE meta data, follow mqd design to move the structures to vi_structs.h. And change the prefix from amdgpu to vi as the structures is only for VI family. Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amd/amdgpu: add DID for Polaris10Junshan Fang
Signed-off-by: Junshan Fang <Junshan.Fang@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu: add polaris12 to virtual dce handlingAlex Deucher
Was missed when polaris12 support was added. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu: remove unused sync testingChristian König
Not used in a while. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Ken Wang <Qingqing.Wang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amd/powerplay: simplify avfs control code in smu7Eric Huang
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amd/powerplay: add function avfs control in smu7Eric Huang
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amd/powerplay: add voltage change support through pp_tableEric Huang
Disable avfs to make voltage change take effect. Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/radeon: remove useless and potentially wrong messageAndy Shevchenko
There is no need to repeat information that printed by PCI core at boot time. Besides that printing was potentially wrong since resource_size_t might be bigger than 32 bits and there is a dedicated specifier for such type, i.e. %pap. Someone can fix it and use even better approach, i.e. %pR. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu: print full bios version in dmesg.Rex Zhu
v2: fix merge error. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Xiaojie Yuan <Xiaojie.Yuan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu: disable HDP flushes on APUsChristian König
We completely bypass the HDP now. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29gpu: drm: amd/radeon: Convert printk(KERN_<LEVEL> to pr_<level>Joe Perches
Use a more common logging style. Miscellanea: o Coalesce formats and realign arguments o Neaten a few macros now using pr_<level> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm: Use pr_cont where appropriateJoe Perches
Using 'printk("\n")' is not preferred anymore and using printk to continue logging messages now produces multiple line logging output unless the continuations use KERN_CONT. Convert these uses to appropriately use pr_cont or a single printk where possible. Miscellanea: o Use a temporary const char * instead of multiple printks o Remove trailing space from logging by using a leading space instead Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu: put gtt at 0 in the internal address spaceAlex Deucher
There still seem to be some blocks that make accesses in the lower part of the address space. This works around this. Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu/vce2: fix vce bar programmingAlex Deucher
Program the VCE BAR and offsets properly. The current code was carried over from a limitation from older VCE versions. Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drivers/gpu: Convert remaining uses of pr_warning to pr_warnJoe Perches
To enable eventual removal of pr_warning This makes pr_warn use consistent for drivers/gpu Prior to this patch, there were 15 uses of pr_warning and 20 uses of pr_warn in drivers/gpu Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amd: Spelling s/SDMA_WRTIE_SUB_OPCODE_TILED/SDMA_WRITE_SUB_OPCODE_TILED/Geert Uytterhoeven
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: dri-devel@lists.freedesktop.orgamd-gfx@lists.freedesktop.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/radeon/dp_auxch: Ratelimit aux transfer debug messagesLyude
Aux transfers always fail with non-zero status flags when there's nothing connected on the port, so we don't usually need to see all of the debugging information from it. Also, we try reprobing a -lot-, so without ratelimiting most of the kernel log is filled up with messages from radeon_dp_aux_transfer_native. Signed-off-by: Lyude <lyude@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu/powerplay: enable LEDs on Fiji boardsAlex Deucher
This enables the LEDs that light up based on DPM states on some Fiji boards. bug: https://bugs.freedesktop.org/show_bug.cgi?id=97590 Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu: rename amdgpu_gca_config to amdgpu_gfx_configJunwei Zhang
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu: Fix module unload hang by KIQ IRQ setTrigger Huang
In some cases, manually insmod/rmmod amdgpu is necessary. When unloading amdgpu, the KIQ IRQ enable/disable function will case system hang. The root cause is, in the sequence of function amdgpu_fini, the sw_fini of IP block AMD_IP_BLOCK_TYPE_GFX will be invoked earlier than that of AMD_IP_BLOCK_TYPE_IH. So continue to use the variable freed by AMD_IP_BLOCK_TYPE_GFX will cause system hang. Signed-off-by: Trigger Huang <trigger.huang@amd.com> Reviewed-by: Xiangliang Yu < Xiangliang.Yu@amd.com> Reviewed-by: Monk Liu <monk.liu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu: bump driver version for new lds buffer queryAlex Deucher
v2: agd: bump version Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu: export gfx config double offchip LDS buffers (v3)Junwei Zhang
v2: move the config struct to drm_amdgpu_info_device v3: move the config feature to amdgpu_gca_config Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu/gfx: free memory of mqd backupXiangliang Yu
Need to free mqd backup when destroying ring. Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Monk Liu <Monk.Liu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu/virt: fix typoXiangliang Yu
When send messages to hypervior, the messages format should be is idh_request, not idh_event. Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Monk Liu <Monk.Liu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu: change pointer of mqd_ptr & mqd_backup to voidXiangliang Yu
vi_mqd is only used by VI family but mqd_ptr and mqd_backup is common for all ASIC, so change the pointer to void. Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Monk Liu <Monk.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu:fix kiq_resume routine (V2)Monk Liu
v2: use in_rest to fix compute ring test failure issue which occured after FLR/gpu_reset. we need backup a clean status of MQD which was created in drv load stage, and use it in resume stage, otherwise KCQ and KIQ all may faild in ring/ib test. Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu:use clear_ring to clr RBMonk Liu
In resume routine, we need clr RB prior to the ring test of engine, otherwise some engine hang duplicated during GPU reset. Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu:imple ring clearMonk Liu
we can use it clear ring buffer instead of fullfill 0, which is not correct for engine Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu:alloc mqd backupMonk Liu
this is required for restoring the mqds after GPU reset. Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu:new field in_reset introduced for gfxMonk Liu
use it to seperate driver load and gpu reset/resume because gfx IP need different approach for different hw_init trigger source Signed-off-by: Monk Liu <Monk.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu:RUNTIME flag should clr laterMonk Liu
this flag will get cleared by request gpu access Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu:use work instead of delay-workMonk Liu
no need to use a delay work since we don't know how much time hypervisor takes on FLR, so just polling and waiting in a work. Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu:no kiq for mailbox registers accessMonk Liu
Use no kiq version reg access due to: 1) better performance 2) INTR context consideration (some routine in mailbox is in INTR context e.g.xgpu_vi_mailbox_rcv_irq) Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu:Refine handshake of mailboxKen Xue
Signed-off-by: Ken Xue <Ken.Xue@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-29drm/amdgpu:impl RREG32 no kiq versionMonk Liu
some registers are PF & VF copy, and we can safely use mmio method to access them. and sometime we are forbid to use kiq to access registers for example in INTR context. we need a MACRO that always disable KIQ for regs accessing Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-08-01 02:07:54 +0000