| Age | Commit message (Collapse) | Author |
|---|
|
This forces the connection to abort if the application failed to
disconnect before flushing. This is aligned with how the common
flush services work.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
There exists a race where the application can setup a connection
and then disconnect it before iw_cxgb4 processes the fw4_ack
message. For passive side connections, the fw4_ack message is
used to know when to stop the ep timer for MPA_REPLY messages.
If the application disconnects before the fw4_ack is handled then
c4iw_ep_disconnect() needs to clean up the timer state and stop the
timer before restarting it for the disconnect timer. Failure to do this
results in a "timer already started" message and a premature stopping
of the disconnect timer.
Fixes: e4b76a2 ("RDMA/iw_cxgb4: stop_ep_timer() after MPA negotiation")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
During connection establishment with a large number of
connections, it is possible that the connection requests
might fail. Adding flow control prevents this failure.
Change ibnl_unicast to use blocking to enable flow control.
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Elsewhere the sin_family field holds a value with a name of the form
AF_..., so it seems reasonable to do so here as well. Also the values
of PF_INET and AF_INET are the same.
The Coccinelle semantic patch that makes this change is as follows:
// <smpl>
@@
struct sockaddr_in sip;
@@
(
sip.sin_family ==
- PF_INET
+ AF_INET
|
sip.sin_family !=
- PF_INET
+ AF_INET
|
sip.sin_family =
- PF_INET
+ AF_INET
)
// </smpl>
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The commit 0f8ab0b6e91b4d53 ("RDMA/iw_cxgb4: Low resource fixes for Memory
registration") from Jun 10, 2016, leads to the following static checker
warning:
drivers/infiniband/hw/cxgb4/mem.c:612 c4iw_alloc_mw()
error: use kfree_skb() here instead of kfree(mhp->dereg_skb)
Also fixes skb leak in c4iw_dealloc_mw
Fixes: 0f8ab0b6e91b4d53 ("RDMA/iw_cxgb4: Low resource fixes for Memory registration")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Fixes the following sparse warning:
drivers/infiniband/hw/mlx5/main.c:2574:25: warning: duplicate const
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Cc: Parav Pandit <pandit.parav@gmail.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Initialize first_wr to &send_wr. This allows to remove a ternary
operator and an else branch. This patch does not change the behavior
of srpt_queue_response().
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Cc: Parav Pandit <pandit.parav@gmail.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Limit the number of SG elements per work request to what the HCA
and the queue pair support.
Fixes: 34693573fde0 ("IB/srpt: Reduce QP buffer size")
Reported-by: Parav Pandit <pandit.parav@gmail.com>
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Steve Wise <swise@opengridcomputing.com>
Cc: Parav Pandit <pandit.parav@gmail.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: <stable@vger.kernel.org> #v4.7+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Compute the SGE limit for RDMA READ and WRITE requests in
ib_create_qp(). Use that limit in the RDMA RW API implementation.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Steve Wise <swise@opengridcomputing.com>
Cc: Parav Pandit <pandit.parav@gmail.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: <stable@vger.kernel.org> #v4.7+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Some but not all callers of rdma_rw_ctx_init() zero-initialize
struct rdma_rw_ctx. Hence make rdma_rw_ctx_init() initialize all
work request fields that will be read by ib_post_send().
Fixes: a060b5629ab0 ("IB/core: generic RDMA READ/WRITE API")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Cc: Parav Pandit <pandit.parav@gmail.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: <stable@vger.kernel.org> #v4.7+
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Add sw counter to track dropped unsupported packets.
Report unsupported packets drop as the RcvError.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jakub Pawlak <jakub.pawlak@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Add per VL XmitDiscards counters to the opapmaquery
status and error response.
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jakub Pawlak <jakub.pawlak@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Fix sparse errors by making sure the fast assign destinations
are host cpu typed.
For the void __iomem *, just make the field match source
data.
Fix a bug where the hw_free trace printed the pointer vs.
the dereferenced value.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The ftrace infrastructure used to evaluate the TRACE_SYSTEM
macro on every DEFINE_EVENT() macro. Now the TRACE_SYSTEM
macro only gets evaluated when trace/define_trace.h is
included, so the group event information is lost. This was
introduced in
commit acd388fd3af3 ("tracing: Give system name a pointer")
Therefore, each system tracepoint must be on its own file.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Fix a copy and paste typo in comment.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Simple code clean up of hfi1_write_iter.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The definition of port state changed mid development and the
old structure was kept accidentally. Remove this dead code.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Just several instances of overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation for writing the tx descriptor from multiple functions,
create a helper for both normal and blueflame access.
Signed-off-by: Brenden Blanco <bblanco@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix to enable remote access rights when allocating stag.
Fixes: b7aee855d3b9 ("RDMA/i40iw: Add base memory management extensions")
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
i40iw_create_cqp() printed the contents of variables maj_err and min_err
in an error message before they could be initialized (by calling
dev->cqp_ops->cqp_create).
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Add the missing port_xmit_wait counter. This counter is displayed through
some tools like perfquery but is not available via sysfs.
For the PORT_PMA_ATTR macro the _counter field is set to zero
allowing us to specify the offset directly like with PORT_PMA_ATTR_EXT
See also the earlier work in 2008 by Vladimir Skolovsky
https://www.mail-archive.com/general@lists.openfabrics.org/msg20313.html
Signed-off-by: Vladimir Sokolvsky <vlad@mellanox.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The critical section should protect only the list traversal
and dd->asic_data modification, not the memory allocation.
The fix pulls the allocation out of the critical section.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
There are several computatations of the sc in the
ud receive routine.
Besides the code duplication, all are wrong when the
sc is greater than 15. In that case the code incorrectly
or's a 1 into the computed sc instead of 1 shifted left
by 4.
Fix precomputed sc5 by using an already implemented routine
hdr2sc() and deleting flawed duplicated code.
Cc: Stable <stable@vger.kernel.org> # 4.6+
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Reduce the set of arguments passed to mlx5_add_flow_rule
by introducing flow_spec structure.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
'mellanox-rc-fixes' into k.o/for-4.7-rc
|
|
Export the firmware version through the core.
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Now that all the devices have stopped exporting their own sysfs
entry points we can have the core export this on their behalf.
Eventually this may be removed but this provides for backwards
compatibility.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Using this allows for devices to specify the format of their
firmware version rather than forcing a format.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
And remove sysfs file in favor of the common core.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
And remove sysfs in favor of the core support.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
And remove the sysfs in favor of the core version.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
And remove the sysfs entry in favor of the core support.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
And remove sysfs entry in favor of the common code.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
And remove the sysfs in favor of common core version.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
And remove sysfs support in favor of the core version.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
And remove sysfs fw_ver in favor of the core.
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Also remove fw_ver sysfs to be replaced by the common core one.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Allow for a common core function to get firmware version strings
from the individual devices.
In later patches this format can then then be used to pass a
properly formated version string through the IPoIB layer.
The problem with the current code in the IPoIB layer is that it is
specific to certain hardware types.
Furthermore, this gives us a common function through which the core
can provide a common sysfs entry. Eventually we may want to
remove the sysfs export but this provides for user space backwards
compatibility.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The memory needed for the send and receive queues associated with
a QP is proportional to the max_sge parameter. The current value
of that parameter is such that with an mlx4 HCA the QP buffer size
is 8 MB. Since DMA is used for communication between HCA and CPU
that buffer either has to be allocated coherently or map_single()
must succeed for that buffer. Since large contiguous allocations
are fragile and since the maximum segment size for e.g. swiotlb
is 256 KB, reduce the max_sge parameter. This patch avoids that
the following text appears on the console after SRP logout and
relogin on a system equipped with multiple IB HCAs:
mlx4_core 0000:05:00.0: swiotlb buffer is full (sz: 8388608 bytes)
swiotlb: coherent allocation failed for device 0000:05:00.0 size=8388608
CPU: 11 PID: 148 Comm: kworker/11:1 Not tainted 4.7.0-rc4-dbg+ #1
Call Trace:
[<ffffffff812c6d35>] dump_stack+0x67/0x92
[<ffffffff812efe71>] swiotlb_alloc_coherent+0x141/0x150
[<ffffffff810458be>] x86_swiotlb_alloc_coherent+0x3e/0x50
[<ffffffffa03861fa>] mlx4_buf_direct_alloc.isra.5+0x9a/0x120 [mlx4_core]
[<ffffffffa0386545>] mlx4_buf_alloc+0x165/0x1a0 [mlx4_core]
[<ffffffffa035053d>] create_qp_common.isra.29+0x57d/0xff0 [mlx4_ib]
[<ffffffffa03510da>] mlx4_ib_create_qp+0x12a/0x3f0 [mlx4_ib]
[<ffffffffa031154a>] ib_create_qp+0x3a/0x250 [ib_core]
[<ffffffffa055dd4b>] srpt_cm_handler+0x4bb/0xcad [ib_srpt]
[<ffffffffa02c1ab0>] cm_process_work+0x20/0xf0 [ib_cm]
[<ffffffffa02c3640>] cm_work_handler+0x1ac0/0x2059 [ib_cm]
[<ffffffff810737ed>] process_one_work+0x19d/0x490
[<ffffffff81073b29>] worker_thread+0x49/0x490
[<ffffffff8107a0ea>] kthread+0xea/0x100
[<ffffffff815b25af>] ret_from_fork+0x1f/0x40
Fixes: b99f8e4d7bcd ("IB/srpt: convert to the generic RDMA READ/WRITE API")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Expose new counters using the get protocol stats callback.
We expose the following counters:
|------------------------------------------------------------------------|
| Name | IB | EN | Description |
|------------------------------------------------------------------------|
|rx_write_requests | + | - | Number of received WRITE requests for |
| | | | the associated QP. |
|------------------------------------------------------------------------|
|rx_read_requests | + | - | Number of received READ requests for |
| | | | the associated QP. |
|------------------------------------------------------------------------|
|rx_atomic_requests | + | - | Number of received ATOMIC requests for |
| | | | the associated QP. |
|------------------------------------------------------------------------|
|out_of_buffer | + | + | Number of drops occurred due to lack |
| | | | of WQE for the associated QPs/RQs. |
|------------------------------------------------------------------------|
|out_of_sequence | + | - | Number of errors in the packet |
| | | | transport sequence number |
|------------------------------------------------------------------------|
|duplicate_request | + | + | Number of received duplicated packets. |
| | | | A request that previously executed is |
| | | | named duplicated. |
|------------------------------------------------------------------------|
|rnr_nak_retry_err | + | + | Number of received RNR NAC packets. |
| | | | The QP retry limit did not exceed. |
|------------------------------------------------------------------------|
|packet_seq_err | + | + | Number of received NAK - sequence error|
| | | | packets. The QP retry limit did not |
| | | | exceed. |
|------------------------------------------------------------------------|
|implied_nak_err | + | + | Number of times the requester detected |
| | | | an ACK with a PSN larger than expected |
| | | | PSN for RDMA READ or ATOMIC response |
| | | | The QP retry limit did not exceed. |
|------------------------------------------------------------------------|
|local_ack_timeout_err| + | - | Number of NO ACK responses from |
| | | | responder within timer interval. |
| | | | The QP retry limit did not exceed. |
|------------------------------------------------------------------------|
Counters are available if all of them are supported.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
In order to support statistics for ports, we attach
each QP to a counter set which is dedicate to this port.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Currently, the SRQ API uses the obsolete mlx5_*_srq_mbox_{in,out}
structs which limit the ability to pass the SRQ attributes between
net and IB parts of the driver.
This patch changes the SRQ API so as to use auto-generated structs
and provides a better way to pass attributes which will be in use by
coming features.
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Enable mlx5 based hardware to report TCP segmentation offload (TSO)
capabilities from kernel to user space. A TSO enabled NIC will accept
big chunks of data with sizes greater than MTU for TCP traffic. The TSO
engine will break the data into separate packets and will insert headers
automatically.
The capabilities are exposed to user space through query_device by uhw
directly. The following capabilities are reported:
1. The maximum payload size in bytes supported for segmentation by TSO
engine.
2. Bitmap showing which QP types are supported by TSO operation. The bitmap
is built by members from 'enmu ib_qp_type'. For example, similar code
should be performed if UD QP is supported:
supported_qpts |= 1 << IB_QPT_UD;
To make user-space library aware of whether kernel supports uhw or not, a
new flag: cmds_supp_uhw will be returned back to user-space through
alloc_ucontext.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Enable flow steering for IPv6 traffic by using an IPv6 spec.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Add IPv6 flow specification support.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The driver exposes interfaces that directly relate to HW state.
Upon fatal error, consumers of these interfaces (ULPs) that rely
on completion of all their posted work-request could hang, thereby
introducing dependencies in shutdown order. To prevent this from
happening, we manage the relevant resources (CQs, QPs) that are used
by the device. Upon a fatal error, we now generate simulated
completions for outstanding WQEs that were not completed at the
time the HW was reset.
It includes invoking the completion event handler for all involved
CQs so that the ULPs will poll those CQs. When polled we return
simulated CQEs with IB_WC_WR_FLUSH_ERR return code enabling ULPs
to clean up their resources and not wait forever for completions
upon receiving remove_one.
The above change requires an extra check in the data path to make
sure that when device is in error state, the simulated CQEs will
be returned and no further WQEs will be posted.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Implements the IB core disassociate_ucontext API.
The driver detaches the HW resources for a given user context to
prevent a dependency between application termination and device
disconnect. This is done by managing the VMAs that were mapped
to the HW bars such as doorbell and blueflame. When need to detach,
remap them to an arbitrary kernel page returned by the zap API.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
