summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)Author
2014-01-21Merge tag 'ib-iio-input-3.13-1' into for-mfd-nextLee Jones
Immutable branch for IIO and Input
2014-01-20Input: wacom - add support for DTU-1031Ping Cheng
Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-01-20Input: wacom - fix wacom->shared guards for dual input devicesPing Cheng
features->quirks can have multiple bits set. For dual input, we only need to check WACOM_QUIRK_MULTI_INPUT. Reviewed-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-01-20Input: edt_ft5x06 - use devm_* functions where appropriateLothar Waßmann
Simplify the error path and remove() function by using devm_* functions for requesting gpios and irq and allocating the input device. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-01-20Merge tag 'tty-3.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here's the big tty/serial driver pull request for 3.14-rc1 There are a number of n_tty fixes and cleanups, and some serial driver bugfixes, and we got rid of one obsolete driver, making this series remove more lines than added, always a nice surprise. All of these have been in linux-next with no reports of issues" * tag 'tty-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (60 commits) tty/serial: at91: disable uart timer at start of shutdown serial: 8250: enable UART_BUG_NOMSR for Tegra tty/serial: at91: reset rx_ring when port is shutdown tty/serial: at91: fix race condition in atmel_serial_remove tty/serial: at91: Handle shutdown more safely serial: sirf: correct condition for fetching dma buffer into tty serial: sirf: provide pm entries of uart_ops serial: sirf: use PM macro initialize PM functions serial: clps711x: Enable driver compilation with COMPILE_TEST serial: clps711x: Add support for N_IRDA line discipline tty: synclink: avoid sleep_on race tty/amiserial: avoid interruptible_sleep_on tty: delete non-required instances of include <linux/init.h> tty: an overflow of multiplication in drivers/tty/cyclades.c serial: Remove old SC26XX driver serial: add support for 200 v3 series Titan card serial: 8250: Fix initialisation of Quatech cards with the AMCC PCI chip tty: Removing the deprecated function tty_vhangup_locked() TTY/n_gsm: Removing the wrong tty_unlock/lock() in gsm_dlci_release() tty/serial: at91: document clock properties ...
2014-01-12Merge branch 'acpi-cleanup'Rafael J. Wysocki
* acpi-cleanup: (22 commits) ACPI / tables: Return proper error codes from acpi_table_parse() and fix comment. ACPI / tables: Check if id is NULL in acpi_table_parse() ACPI / proc: Include appropriate header file in proc.c ACPI / EC: Remove unused functions and add prototype declaration in internal.h ACPI / dock: Include appropriate header file in dock.c ACPI / PCI: Include appropriate header file in pci_link.c ACPI / PCI: Include appropriate header file in pci_slot.c ACPI / EC: Mark the function acpi_ec_add_debugfs() as static in ec_sys.c ACPI / NVS: Include appropriate header file in nvs.c ACPI / OSL: Mark the function acpi_table_checksum() as static ACPI / processor: initialize a variable to silence compiler warning ACPI / processor: use ACPI_COMPANION() to get ACPI device ACPI: correct minor typos ACPI / sleep: Drop redundant acpi_disabled check ACPI / dock: Drop redundant acpi_disabled check ACPI / table: Replace '1' with specific error return values ACPI: remove trailing whitespace ACPI / IBFT: Fix incorrect <acpi/acpi.h> inclusion in iSCSI boot firmware module ACPI / i915: Fix incorrect <acpi/acpi.h> inclusions via <linux/acpi_io.h> SFI / ACPI: Fix warnings reported during builds with W=1 ... Conflicts: drivers/acpi/nvs.c drivers/hwmon/asus_atk0110.c
2014-01-12Input: hyperv-keyboard - pass through 0xE1 prefixK. Y. Srinivasan
Pass through the 0xE1 prefix so atkbd can properly parse the scancode data. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-01-12Input: logips2pp - fix spelling s/reciver/receiver/Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-01-07mfd: ti_am335x_tscadc: Don't read back REG_SESebastian Andrzej Siewior
The purpose of reg_se_cache has been defeated. It should avoid the read-back of the register to avoid the latency and the fact that the bits are reset to 0 after the individual conversation took place. The reason why this is required like this to work, is that read-back of the register removes the bits of the ADC so they do not start another conversation after the register is re-written from the TSC side for the update. To avoid the not required read-back I introduce a "set once" variant which does not update the cache mask. After the conversation completes, the bit is removed from the SE register anyway and we don't plan a new conversation "any time soon". The current set function is renamed to set_cache to distinguish the two operations. This is a small preparation for a larger sync-rework. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-06Input: delete non-required instances of include <linux/init.h>Paul Gortmaker
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-01-06Input: twl4030-keypad - convert to using managed resourcesDmitry Torokhov
Reviewed-by: Jingoo Han <jg1.han@samsung.com> Tested-by: Sebastian Reichel <sre@debian.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-01-06Input: twl6040-vibra - remove unneeded check for CONFIG_OFDmitry Torokhov
Since the driver requires DT now we do not need to check if CONFIG_OF is defined. Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-01-04Input: twl4030-keypad - add device tree supportSebastian Reichel
Add device tree support for twl4030 keypad driver. Tested on Nokia N900. Signed-off-by: Sebastian Reichel <sre@debian.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-01-04Input: twl6040-vibra - add missing of_node_putLibo Chen
We should drop reference to twl6040_core_node device_node once we are done using it. Signed-off-by: Libo Chen <libo.chen@huawei.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-01-04Input: twl4030-vibra - add missing of_node_putLibo Chen
We should drop reference to twl6040_core_node device_node once we are done using it. Signed-off-by: Libo Chen <libo.chen@huawei.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-01-03xen/pvhvm: If xen_platform_pci=0 is set don't blow up (v4).Konrad Rzeszutek Wilk
The user has the option of disabling the platform driver: 00:02.0 Unassigned class [ff80]: XenSource, Inc. Xen Platform Device (rev 01) which is used to unplug the emulated drivers (IDE, Realtek 8169, etc) and allow the PV drivers to take over. If the user wishes to disable that they can set: xen_platform_pci=0 (in the guest config file) or xen_emul_unplug=never (on the Linux command line) except it does not work properly. The PV drivers still try to load and since the Xen platform driver is not run - and it has not initialized the grant tables, most of the PV drivers stumble upon: input: Xen Virtual Keyboard as /devices/virtual/input/input5 input: Xen Virtual Pointer as /devices/virtual/input/input6M ------------[ cut here ]------------ kernel BUG at /home/konrad/ssd/konrad/linux/drivers/xen/grant-table.c:1206! invalid opcode: 0000 [#1] SMP Modules linked in: xen_kbdfront(+) xenfs xen_privcmd CPU: 6 PID: 1389 Comm: modprobe Not tainted 3.13.0-rc1upstream-00021-ga6c892b-dirty #1 Hardware name: Xen HVM domU, BIOS 4.4-unstable 11/26/2013 RIP: 0010:[<ffffffff813ddc40>] [<ffffffff813ddc40>] get_free_entries+0x2e0/0x300 Call Trace: [<ffffffff8150d9a3>] ? evdev_connect+0x1e3/0x240 [<ffffffff813ddd0e>] gnttab_grant_foreign_access+0x2e/0x70 [<ffffffffa0010081>] xenkbd_connect_backend+0x41/0x290 [xen_kbdfront] [<ffffffffa0010a12>] xenkbd_probe+0x2f2/0x324 [xen_kbdfront] [<ffffffff813e5757>] xenbus_dev_probe+0x77/0x130 [<ffffffff813e7217>] xenbus_frontend_dev_probe+0x47/0x50 [<ffffffff8145e9a9>] driver_probe_device+0x89/0x230 [<ffffffff8145ebeb>] __driver_attach+0x9b/0xa0 [<ffffffff8145eb50>] ? driver_probe_device+0x230/0x230 [<ffffffff8145eb50>] ? driver_probe_device+0x230/0x230 [<ffffffff8145cf1c>] bus_for_each_dev+0x8c/0xb0 [<ffffffff8145e7d9>] driver_attach+0x19/0x20 [<ffffffff8145e260>] bus_add_driver+0x1a0/0x220 [<ffffffff8145f1ff>] driver_register+0x5f/0xf0 [<ffffffff813e55c5>] xenbus_register_driver_common+0x15/0x20 [<ffffffff813e76b3>] xenbus_register_frontend+0x23/0x40 [<ffffffffa0015000>] ? 0xffffffffa0014fff [<ffffffffa001502b>] xenkbd_init+0x2b/0x1000 [xen_kbdfront] [<ffffffff81002049>] do_one_initcall+0x49/0x170 .. snip.. which is hardly nice. This patch fixes this by having each PV driver check for: - if running in PV, then it is fine to execute (as that is their native environment). - if running in HVM, check if user wanted 'xen_emul_unplug=never', in which case bail out and don't load any PV drivers. - if running in HVM, and if PCI device 5853:0001 (xen_platform_pci) does not exist, then bail out and not load PV drivers. - (v2) if running in HVM, and if the user wanted 'xen_emul_unplug=ide-disks', then bail out for all PV devices _except_ the block one. Ditto for the network one ('nics'). - (v2) if running in HVM, and if the user wanted 'xen_emul_unplug=unnecessary' then load block PV driver, and also setup the legacy IDE paths. In (v3) make it actually load PV drivers. Reported-by: Sander Eikelenboom <linux@eikelenboom.it Reported-by: Anthony PERARD <anthony.perard@citrix.com> Reported-and-Tested-by: Fabio Fantoni <fabio.fantoni@m2r.biz> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [v2: Add extra logic to handle the myrid ways 'xen_emul_unplug' can be used per Ian and Stefano suggestion] [v3: Make the unnecessary case work properly] [v4: s/disks/ide-disks/ spotted by Fabio] Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> [for PCI parts] CC: stable@vger.kernel.org
2014-01-02Input: i8042 - cleanup SERIO_I8042 dependenciesMark Salter
Remove messy dependencies from SERIO_I8042 by having it depend on one Kconfig symbol (ARCH_MIGHT_HAVE_PC_SERIO) and having architectures which need it select ARCH_MIGHT_HAVE_PC_SERIO in arch/*/Kconfig. New architectures are unlikely to need SERIO_I8042, so this avoids having an ever growing list of architectures to exclude. Signed-off-by: Mark Salter <msalter@redhat.com> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-01-02Input: xpad - add new USB IDs for Logitech F310 and F710Petr Sebor
This enables the rumble force feedback on the F710 unit since it is no longer treated as XTYPE_UNKNOWN type. Signed-off-by: Petr Sebor <petr@scssoft.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-01-02Input: xpad - change D-PAD mapping on Razer devicesThomaz de Oliveira dos Reis
When using Razer Onza controller the dpad doesn't work in many games because D-PAD was mapped to buttons (useful for dance pads) and not to HAT0X/Y axis. ers who really want to have it mapped to buttons can restore previous behavior by using 'dpad_to_buttons' module option. Signed-off-by: Thomaz de Oliveira dos Reis <thor27@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-31Input: allocate absinfo data when setting ABS capabilityDmitry Torokhov
We need to make sure we allocate absinfo data when we are setting one of EV_ABS/ABS_XXX capabilities, otherwise we may bomb when we try to emit this event. Rested-by: Paul Cercueil <pcercuei@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-31Input: cros_ec_keyb - fix problems with backslashDoug Anderson
The driver can't deal with two entries its keymap having the same keycode. When this happens it will get confused about whether the key is down or up and will cause some screwy behavior. We need to have two entries for KEY_BACKSLASH to handle US and UK keyboards. Specifically: * On the US keyboard the backslash key (above enter) is r3 c11 and is supposed to be reported as BACKSLASH. * On the UK keyboard the # key (left of enter) is r4 c10 and is supposed to be reported as BACKSLASH. * On the UK keyboard the \ key (left of Z) is r2 c7 and is supposed to be reported as KEY_102ND. Note that both keyboards (US and UK) have only one physical backslash key so the constraint that each physical key should have its own keycode still stands. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-29ARM: 7904/1: input: ambakmi: Remove unnecessary amba_set_drvdata()Michal Simek
Driver core clears the driver data to NULL after device_release or on probe failure, so just remove it from here. Driver core change: "device-core: Ensure drvdata = NULL when no driver is bound" (sha1: 0998d0631001288a5974afc0b2a5f568bcdecb4d) Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-12-27Input: pmic8xxx-pwrkey - switch to using managed resourcesDmitry Torokhov
This simplifies error handling and device removal paths. Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-27Input: pmic8xxx-pwrkey - pass correct device identity to free_irq()Wei Yongjun
free_irq() in the error handling case is missing when change pass input device directly to interrupt. Fixes: b27f8fee4965('Input: pmic8xxx-pwrkey - pass input device directly to interrupt') Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-26Input: ALPS - add support for "Dolphin" devicesYunkang Tang
This adds support for another flavor of ALPS protocol used in newer "Dolphin" devices. Signed-off-by: Yunkang Tang <yunkang.tang@cn.alps.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-26Merge tag 'tegra-for-3.14-dmas-resets-rework' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/cleanup From Stephen Warren: ARM: tegra: implement common DMA and resets DT bindings This series converts the Tegra DTs and drivers to use the common/ standard DMA and reset bindings, rather than custom bindings. It also adds complete documentation for the Tegra clock bindings without actually changing any binding definitions. This conversion relies on a few sets of patches in branches from outside the Tegra tree: 1) A patch to add an DMA channel request API which allows deferred probe to be implemented. 2) A patch to implement a common part of the of_xlate function for DMA controllers. 3) Some ASoC patches (which in turn rely on (1) above), which support deferred probe during DMA channel allocation. 4) The Tegra clock driver changes for 3.14. Consequently, this branch is based on a merge of all of those external branches. In turn, this branch is or will be pulled into a few places that either rely on features introduced here, or would otherwise conflict with the patches: a) Tegra's own for-3.14/powergate and for-4.14/dt branches, to avoid conflicts. b) The DRM tree, which introduces new code that relies on the reset controller framework introduced in this branch, and to avoid conflicts. * tag 'tegra-for-3.14-dmas-resets-rework' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (30 commits) spi: tegra: checking for ERR_PTR instead of NULL ASoC: tegra: update module reset list for Tegra124 clk: tegra: remove bogus PCIE_XCLK clk: tegra: remove legacy reset APIs ARM: tegra: remove legacy DMA entries from DT ARM: tegra: remove legacy clock entries from DT USB: EHCI: tegra: use reset framework Input: tegra-kbc - use reset framework serial: tegra: convert to standard DMA DT bindings serial: tegra: use reset framework spi: tegra: convert to standard DMA DT bindings spi: tegra: use reset framework staging: nvec: use reset framework i2c: tegra: use reset framework ASoC: tegra: convert to standard DMA DT bindings ASoC: tegra: allocate AHUB FIFO during probe() not startup() ASoC: tegra: call pm_runtime APIs around register accesses ASoC: tegra: use reset framework dma: tegra: register as an OF DMA controller dma: tegra: use reset framework ... Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-20input: ixp4xx-beeper: don't use symbols from <mach/timex.h>Uwe Kleine-König
mach/timex.h is about to be dropped so don't use symbols defined in there. For ixp4xx there is a suitable substitute for IXP4XX_TIMER_FREQ, i.e. a global and exported variable that holds the same value. Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2013-12-18Input: zforce - fix error return code in zforce_start()Wei Yongjun
The error code was not set if unable to set config, so the error condition wasn't reflected in the return value. Fix to return a negative error code from the error handling case instead of 0. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-18Input: elantech - improve clickpad detectionHans de Goede
The current assumption in the elantech driver that hw version 3 touchpads are never clickpads and hw version 4 touchpads are always clickpads is wrong. There are several bug reports for this, ie: https://bugzilla.redhat.com/show_bug.cgi?id=1030802 http://superuser.com/questions/619582/right-elantech-touchpad-button-not-working-in-linux I've spend a couple of hours wading through various bugzillas, launchpads and forum posts to create a list of fw-versions and capabilities for different laptop models to find a good method to differentiate between clickpads and versions with separate hardware buttons. Which shows that a device being a clickpad is reliable indicated by bit 12 being set in the fw_version. I've included the gathered list inside the driver, so that we've this info at hand if we need to revisit this later. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-16Merge 3.13-rc4 into tty-nextGreg Kroah-Hartman
We want the fixes in here as well.
2013-12-16Input: don't call input_dev_release_keys() in resumeAleksej Makarov
When waking up the platform by pressing a specific key, sending a release on that key makes it impossible to react on the event in user-space. This is fixed by moving the input_reset_device() call to resume instead. [dmitry.torokhov@gmail.com: make sure we still restore LED/sound state after resume, handle hibernation properly] Signed-off-by: Aleksej Makarov <aleksej.makarov@sonymobile.com> Signed-off-by: Oskar Andero <oskar.andero@sonymobile.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-16Input: ads7846 - convert to hwmon_device_register_with_groups()Guenter Roeck
Simplify the code and create mandatory 'name' attribute by using new hwmon API. Also use is_visible to determine visible attributes instead of creating several different attribute groups. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-16Input: wacom - add reporting of SW_MUTE_DEVICE eventsPing Cheng
New Intuos series models added a hardware switch to turn touch data on/off. The state of the switch is reported periodically from the tablet. To report the state the driver will emit SW_MUTE_DEVICE events. Reviewed_by: Chris Bagwell <chris@cnpbagwell.com> Acked-by: Peter Hutterer <peter.hutterer@who-t.net> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-16Merge tag 'v3.13-rc4' into nextDmitry Torokhov
Synchronize with mainline to bring in the new keycode definitions and new hwmon API.
2013-12-15Input: pmic8xxx-pwrkey - migrate to regmap APIsStephen Boyd
Use the regmap APIs for this driver instead of custom pm8xxx APIs. This breaks this driver's dependency on the pm8xxx APIs and allows us to easily port it to other bus protocols in the future. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-15Input: pmic8xxx-pwrkey - pass input device directly to interruptStephen Boyd
Instead of passing the pointer to the container structure just pass the input device here. This saves a dereference in the fast path. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-15Input: pm8xxx-vibrator - migrate to regmap APIsStephen Boyd
Use the regmap APIs for this driver instead of custom pm8xxx APIs. This breaks this driver's dependency on the pm8xxx APIs and allows us to easily port it to other bus protocols in the future. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-15Input: pm8xxx-vibrator - switch to using managed resourcesStephen Boyd
Simplify the error paths and reduce the lines of code in this driver by using the devm_* APIs. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-15Input: cyttsp - include appropriate header file in cyttsp_i2c_common.cRashika Kheria
Include cyttsp4_core.h in cyttsp_i2c_common.c to ensure that implementation of cyttsp_i2c_read_block_data() and cyttsp_i2c_write_block_data() match what the rest of the driver expects. Thus, it also eliminates the following warning in cyttsp_i2c_common.c: drivers/input/touchscreen/cyttsp_i2c_common.c:34:5: warning: no previous prototype for ‘cyttsp_i2c_read_block_data’ [-Wmissing-prototypes] drivers/input/touchscreen/cyttsp_i2c_common.c:64:5: warning: no previous prototype for ‘cyttsp_i2c_write_block_data’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-15Input: zforce - fix possible driver hang during suspendHeiko Stübner
handle_level_irq masks the interrupt before handling it, and only unmasks it after the handler is finished. So when a touch event happens after threads are suspended, but before the system is fully asleep the irq handler tries to wakeup the thread which will only happen on the next resume, resulting in the wakeup event never being sent and the driver not being able to wake the system from sleep due to the masked irq. Therefore move the wakeup_event to a small non-threaded handler. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-11Input: tegra-kbc - use reset frameworkStephen Warren
Tegra's clock driver now provides an implementation of the common reset API (include/linux/reset.h). Use this instead of the old Tegra- specific API; that will soon be removed. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Thierry Reding <treding@nvidia.com>
2013-12-09Input: adxl34x - Fix bug in definition of ADXL346_2D_ORIENTMichael Hennerich
Coverity report pointet out by Dmitry Reported-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-09Input: serio - fix sysfs layoutDmitry Torokhov
Restore previous layout of sysfs attributes that was broken by commit 3778a2129bcce84f684cc0017ed20d2524afd289 (input: serio: remove bus usage of dev_attrs) which moved all serio device attributes into 'id' group, when only 'type', 'proto', 'id', and 'extra' should be in 'id' group and the rest of attributes should be attached directly to the device. Reported-by: Thomas Hellstrom <thellstrom@vmware.com> Tested-by: Thomas Hellstrom <thellstrom@vmware.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-09Merge tag 'v3.13-rc3' into for-linusDmitry Torokhov
Merging with the mainline to sync up on changes to serio core.
2013-12-08tty: Always handle NULL flag ptrPeter Hurley
Most line disciplines already handle the undocumented NULL flag ptr in their .receive_buf method; however, several don't. Document the NULL flag ptr, and correct handling in the N_MOUSE, N_GSM0710 and N_R394 line disciplines. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-07Input: samsung-keypad - favor platform data if presentDmitry Torokhov
We should be able to override firmware-provided parameters with in-kernel data, if needed. To that effect favor platform data, if present, over devicetree data. Acked-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-07ACPI: Clean up inclusions of ACPI header filesLv Zheng
Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-06Input: use dev_get_platdata()Jingoo Han
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-05Input: sh_keysc - restrict non-COMPILE_TEST compilationLaurent Pinchart
Hardware supported by the driver is only found on SUPERH or ARCH_SHMOBILE platforms. Restrict non-COMPILE_TEST compilation to them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-05Input: ALPS - add support for DualPoint device on Dell XT2 modelYunkang Tang
The device uses special MPU controller that necessitates the new initialization sequence for the device. We also define a new protocol for the trackpad that allows reporting better resolution than older V2 protocol. Signed-off-by: Yunkang Tang <yunkang.tang@cn.alps.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-23 06:52:47 +0000