summaryrefslogtreecommitdiff
path: root/drivers/mmc
AgeCommit message (Collapse)Author
2012-01-12mmc: sdhci: Fix tuning timer incorrect setting when suspending hostAaron Lu
When suspending host, the tuning timer shoule be deactivated. And the HOST_NEEDS_TUNING flag should be set after tuning timer is deactivated. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Aaron Lu <aaron.lu@amd.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: core: Add option to prevent eMMC sleep commandUlf Hansson
Host may now use MMC_CAP2_NO_SLEEP_CMD to disable the use of eMMC sleep/awake command. This option can be used when your platform has a buggy kernel crash dump software, which is supposed to store the dump on the eMMC, but is not able to wake up the eMMC from sleep state. In particular, failures have been seen with u-boot; even if it is fixed there, platforms will be slow to update their bootloader binaries. Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Reviewed-by: Hanumath Prasad <hanumath.prasad@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: omap_hsmmc: use threaded irq handler for card-detect.NeilBrown
As the card-detect irq handler just schedules work to be done by a thread, we can use request_threaded_irq to do much of the work for us. This means that interrupts which arrive by handle_nested_irq actually work. Reviewed-by: Felipe Balbi <balbi@ti.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: Kishore Kadiyala <kishorek.kadiyala@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: sdhci-pci: enable runtime PM for Medfield SDIOAdrian Hunter
Runtime PM for SDIO is no longer enabled by default (see 5c7f0e083d2d98ba14ddd10e88f001a0ead4cae4) so it must now be enabled per platform, in this case Medfield uses it. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: sdhci: Always pass clock request value zero to set_clock host opTodd Poynor
To allow the set_clock host op to disable the SDCLK source when not needed, always call the host op when the requested clock speed is zero. Do this even if host->clock already equals zero, because the SDHCI driver may set that value (without calling the host op) to force an update at the next (non-zero-speed) call. Signed-off-by: Todd Poynor <toddpoynor@google.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: sdhci-pci: remove SDHCI_QUIRK2_OWN_CARD_DETECTIONAdrian Hunter
Even if a driver provides separate card detection, an interrupt is still needed to abort mmc requests that are in progress. SDHCI_QUIRK2_OWN_CARD_DETECTION prevents that, so remove it. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: sdhci-pci: get gpio numbers from platform dataAdrian Hunter
Retrieve the GPIO numbers for hardware reset and card detect from platform data. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: sdhci-pci: add platform dataAdrian Hunter
Add a means of getting platform data for the SDHCI PCI devices. The data is stored against the slot not the device in order to support multi-slot devices. The data allows platform-specific setup (such as getting GPIO numbers from firmware or setting up wl12xx for SDIO) to be done in platform support files instead of the sdhci-pci driver. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: sdhci: prevent card detection activity for non-removable cardsAdrian Hunter
Do not enable card detection interrupts for non-removable cards. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: sdhci: fix vmmc handlingAdrian Hunter
Presently the vmmc regulator is enabled when the host controller is added and disabled when it is removed. However, the vmmc regulator should be under the control of the upper layers via ->set_ios(). Make it so. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: core: Add claiming of hosts during mmc_cache_ctrlSeungwon Jeon
While calling mmc_cache_ctrl() a host is not claimed. This patch adds the mmc_try_claim_host() for quick response in suspend. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: omap: remove clock rate hard codingBalaji TK
MMC master clock rate can vary for each instance of the MMC controller on the device. Use clk_get_rate instead to get the value. Signed-off-by: Balaji TK <balajitk@ti.com> Reviewed-by: Venkatraman S <svenkatr@ti.com> Tested-by: Hebbar, Gururaja <gururaja.hebbar@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: sh_mmcif: remove now superfluous sh_mmcif_host::data memberGuennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: sh_mmcif: process requests asynchronouslyGuennadi Liakhovetski
This patch converts the sh_mmcif MMC host driver to process requests asynchronously instead of waiting in its .request() method for completion. This is achieved by using threaded IRQs. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: sh_mmcif: cosmetic clean upGuennadi Liakhovetski
This patch doesn't introduce any functional changes, it only simplifies some code fragments, removes superfluous parameters, fixes typos. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: sh_mmcif: process error interrupts firstGuennadi Liakhovetski
If an interrupt is coming with both error and data completion status bits set, it has to be handled as an error interrupt, for which error interrupts have to be processed first. The current version of the driver on the contrary doesn't recognise such interrupts as an error event, which leads to data corruption and breaks the error recovery. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: add a generic GPIO card-detect helperGuennadi Liakhovetski
This patch adds a primitive helper to support card hotplug detection on platforms, where a GPIO, capable of producing interrupts, is used for detection of card-insertion and -removal events. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: tmio_mmc: Hotplug code regroupingBastian Hecht
This patch regroups the code slightly, adds documentation and allows the rtpm counter of MMC_CAP_NEEDS_POLL devices to reach 0 again. Signed-off-by: Bastian Hecht <hechtb@gmail.com> [g.liakhovetski@gmx.de: restore pm_runtime_get_noresume()] Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: core: Fix voltage select in DDR modeGirish K S
This patch fixes the wrong comparison before setting the interface voltage in DDR mode. The assignment to the variable ddr before comaprison is either ddr = MMC_1_2V_DDR_MODE; or ddr == MMC_1_8V_DDR_MODE. But the comparison is done with the extended csd value if ddr == EXT_CSD_CARD_TYPE_DDR_1_2V. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Acked-by: Subhash Jadavani <subhashj@codeaurora.org> Acked-by: Philip Rakity <prakity@marvell.com> Cc: <stable@kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: sdhci-s3c: use S3C_SDHCI_CONTROL2 instead of hardcoded offset valueJingoo Han
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: dw_mmc: Support predefined mutiple block transfersSeungwon Jeon
This patch adds the support for predefined multiple block r/w. dw_mmc can support MMC_CAP_CMD23 capability. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: dw_mmc: Remove unnecessary else clausesChris Ball
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: dw_mmc: Add more capabilities fieldSeungwon Jeon
This patch adds another capabilities field for MMC_CAPS2_XXX. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: dw_mmc: use dev_pm_ops for dw_mmc controllersJaehoon Chung
This patch modifies dw_mmc to use dev_pm_ops. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: card: Kill block requests if card is removedSujit Reddy Thumma
Kill block requests when the host realizes that the card is removed from the slot and is sure that subsequent requests are bound to fail. Do this silently so that the block layer doesn't output unnecessary error messages. Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: core: Fixup delayed work clock gating patchStephen Boyd
c31b50e (mmc: core: Use delayed work in clock gating framework, 2011-11-14) missed a few things during review: o A useless pr_info() o milliseconds was written as two words o The sysfs file had units in its output Fix all three problems. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Sujit Reddy Thumma <sthumma@codeaurora.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: sdhci-pci: simplify error handlingAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: boot partition ro lock supportJohan Rudholm
Enable boot partitions to be read-only locked until next power on via a sysfs entry. There will be one sysfs entry for each boot partition: /sys/block/mmcblkXbootY/ro_lock_until_next_power_on Each boot partition is locked by writing 1 to its file. Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com> Signed-off-by: John Beckett <john.beckett@stericsson.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: sdhci-s3c: Add pm_caps into SD/MMC hostSangwook Lee
sdhci-s3c updates pm_caps from platform data for SDIO PM. Signed-off-by: Sangwook Lee <sangwook.lee@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: allow upper layers to know immediately if card has been removedAdrian Hunter
Add a function mmc_detect_card_removed() which upper layers can use to determine immediately if a card has been removed. This function should be called after an I/O request fails so that all queued I/O requests can be errored out immediately instead of waiting for the card device to be removed. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Sujit Reddy Thumma <sthumma@codeaurora.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: remove the second argument of k[un]map_atomic()Cong Wang
Signed-off-by: Cong Wang <amwang@redhat.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: convert drivers/mmc/host/* to use module_platform_driver()Axel Lin
This patch converts the drivers in drivers/mmc/host/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Acked-by: David Brown <davidb@codeaurora.org> Acked-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: Remove redundant spi driver bus initializationLars-Peter Clausen
In ancient times it was necessary to manually initialize the bus field of an spi_driver to spi_bus_type. These days this is done in spi_driver_register(), so we can drop the manual assignment. The patch was generated using the following coccinelle semantic patch: // <smpl> @@ identifier _driver; @@ struct spi_driver _driver = { .driver = { - .bus = &spi_bus_type, }, }; // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: sh_mmcif: simplify clock divisor calculationGuennadi Liakhovetski
Replace ilog2(__rounddown_pow_of_two(x)) with the equivalent but much simpler fls(x) - 1. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: core: check for zero length ioctl dataJohan Rudholm
If the read or write buffer size associated with the command sent through the mmc_blk_ioctl is zero, do not prepare data buffer. This enables a ioctl(2) call to for instance send a MMC_SWITCH to set a byte in the ext_csd. Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: sdhci-esdhc: Change delay after setting clock from 100ms to 1msTony Lin
1ms is enough for hardware to change the clock to stable. 100ms is too long in the tasklet. Signed-off-by: Tony Lin <tony.lin@freescale.com> CC: Xiaobo Xie <X.Xie@freescale.com> CC: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: mmc_test: align max_seg_sizePer Forlin
If max_seg_size is unaligned, mmc_test_map_sg() may create sg element sizes that are not aligned with 512 byte. Fix, align max_seg_size at mmc_test_area_init(). Signed-off-by: Per Forlin <per.forlin@stericsson.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: mmci: add capabilities2 for MMC_CAP2Per Forlin
Signed-off-by: Per Forlin <per.forlin@stericsson.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: sdio: support SDIO UHS cardsPhilip Rakity
This patch adds support for sdio UHS cards per the version 3.0 spec. UHS mode is only enabled for version 3.0 cards when both the host and the controller support UHS modes. 1.8v signaling support is removed if both the card and the host do not support UHS. This is done to maintain compatibility and some system/card combinations break when 1.8v signaling is enabled when the host does not support UHS. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Aaron Lu <Aaron.lu@amd.com> Reviewed-by: Arindam Nath <arindam.nath@amd.com> Tested-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: sdhci-spear: Implement suspend/resumeViresh Kumar
Suspend/Resume is missing from sdhci-spear driver. This patch adds support for suspend/resume for this driver. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: core: Use delayed work in clock gating frameworkSujit Reddy Thumma
Current clock gating framework disables the MCI clock as soon as the request is completed and enables it when a request arrives. This aggressive clock gating framework, when enabled, cause following issues: When there are back-to-back requests from the Queue layer, we unnecessarily end up disabling and enabling the clocks between these requests since 8MCLK clock cycles is a very short duration compared to the time delay between back to back requests reaching the MMC layer. This overhead can effect the overall performance depending on how long the clock enable and disable calls take which is platform dependent. For example on some platforms we can have clock control not on the local processor, but on a different subsystem and the time taken to perform the clock enable/disable can add significant overhead. Also if the host controller driver decides to disable the host clock too when mmc_set_ios function is called with ios.clock=0, it adds additional delay and it is highly possible that the next request had already arrived and unnecessarily blocked in enabling the clocks. This is seen frequently when the processor is executing at high speeds and in multi-core platforms thus reduces the overall throughput compared to if clock gating is disabled. Fix this by delaying turning off the clocks by posting request on delayed workqueue. Also cancel the unscheduled pending work, if any, when there is access to card. sysfs entry is provided to tune the delay as needed, default value set to 200ms. Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: card: Use manufacturer ID symbols in card quirks.Chris Ball
No functional change; adds macros for card manufacturer IDs. Signed-off-by: Chris Ball <cjb@laptop.org> Cc: Andrei E. Warkentin <andrey.warkentin@gmail.com> Cc: Stefan Nilsson XK <stefan.xk.nilsson@stericsson.com>
2012-01-11mmc: debugfs: expose the SDCLK frq in sys iosGiuseppe CAVALLARO
This patch is to expose the actual SDCLK frequency in /sys/kernel/debug/mmcX/ios entry. For example, if the max clk for a normal speed card is 20MHz this is reported in /sys/kernel/debug/mmcX/ios. Unfortunately the actual SDCLK frequency (i.e. Baseclock / divisor) is not reported at all: for example, in that case, on Arasan HC, it should be 48/4=12 (MHz). Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: sdio: Fix to support any block size optimallyStefan Nilsson XK
This patch allows any block size to be set on the SDIO link, and still have an arbitrary sized packet (adjusted in size by using sdio_align_size) transferred in an optimal way (preferably one transfer). Previously if the block size was larger than the default of 512 bytes and the transfer size was exactly one block size (possibly thanks to using sdio_align_size to get an optimal transfer size), it was sent as a number of byte transfers instead of one block transfer. Also if the number of blocks was (max_blocks * N) + 1, the tranfer would be conducted with a number of blocks and finished off with a number of byte transfers. When doing this change it was also possible to break out the quirk for broken byte mode in a much cleaner way, and collect the logic of when to do byte or block transfer in one function instead of two. Signed-off-by: Stefan Nilsson XK <stefan.xk.nilsson@stericsson.com> Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: sd: Macro name cleanup for high speed dtrQiang Liu
Add new macros for the high speed 50MHz case, rather than having a confusing reuse of the value for UHS SDR50, which is 100MHz. Reported-by: Aaron Lu <aaron.lu@amd.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-09Merge tag 'clk' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
clock management changes for i.MX Another simple series related to clock management, this time only for imx. * tag 'clk' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: mxs: select HAVE_CLK_PREPARE for clock clk: add config option HAVE_CLK_PREPARE into Kconfig ASoC: mxs-saif: convert to clk_prepare/clk_unprepare video: mxsfb: convert to clk_prepare/clk_unprepare serial: mxs-auart: convert to clk_prepare/clk_unprepare net: flexcan: convert to clk_prepare/clk_unprepare mtd: gpmi-lib: convert to clk_prepare/clk_unprepare mmc: mxs-mmc: convert to clk_prepare/clk_unprepare dma: mxs-dma: convert to clk_prepare/clk_unprepare net: fec: add clk_prepare/clk_unprepare ARM: mxs: convert platform code to clk_prepare/clk_unprepare clk: add helper functions clk_prepare_enable and clk_disable_unprepare Fix up trivial conflicts in drivers/net/ethernet/freescale/fec.c due to commit 0ebafefcaa7a ("net: fec: add clk_prepare/clk_unprepare") clashing trivially with commit e163cc97f9ac ("net/fec: fix the .remove code").
2012-01-09Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Driver specific changes Again, a lot of platforms have changes in here: pxa, samsung, omap, at91, imx, ... * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) ARM: sa1100: clean up of the clock support ARM: pxa: add dummy clock for sa1100-rtc RTC: sa1100: support sa1100, pxa and mmp soc families RTC: sa1100: remove redundant code of setting alarm RTC: sa1100: Clean out ost register Input: zylonite-wm97xx - replace IRQ_GPIO() with gpio_to_irq() pcmcia: pxa: replace IRQ_GPIO() with gpio_to_irq() ARM: EXYNOS: Modified files for SPI consolidation work ARM: S5P64X0: Enable SDHCI support ARM: S5P64X0: Add lookup of sdhci-s3c clocks using generic names ARM: S5P64X0: Add HSMMC setup for host Controller ARM: EXYNOS: Add USB OHCI support to ORIGEN board USB: Add Samsung Exynos OHCI diver ARM: EXYNOS: Add USB OHCI support to SMDKV310 board ARM: EXYNOS: Add USB OHCI device net: macb: fix build break with !CONFIG_OF i2c: tegra: Support DVC controller in device tree i2c: tegra: Add __devinit/exit to probe/remove net/at91_ether: use gpio_is_valid for phy IRQ line ARM: at91/net: add macb ethernet controller in 9g45/9g20 DT ...
2012-01-09Merge tag 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
New feature development This adds support for new features, and contains stuff from most platforms. A number of these patches could have fit into other branches, too, but were small enough not to cause too much confusion here. * tag 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits) mfd/db8500-prcmu: remove support for early silicon revisions ARM: ux500: fix the smp_twd clock calculation ARM: ux500: remove support for early silicon revisions ARM: ux500: update register files ARM: ux500: register DB5500 PMU dynamically ARM: ux500: update ASIC detection for U5500 ARM: ux500: support DB8520 ARM: picoxcell: implement watchdog restart ARM: OMAP3+: hwmod data: Add the default clockactivity for I2C ARM: OMAP3: hwmod data: disable multiblock reads on MMC1/2 on OMAP34xx/35xx <= ES2.1 ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP4 ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP3 ARM: OMAP: hwmod data: Add support for AM35xx UART4/ttyO3 ARM: Orion: Remove address map info from all platform data structures ARM: Orion: Get address map from plat-orion instead of via platform_data ARM: Orion: mbus_dram_info consolidation ARM: Orion: Consolidate the address map setup ARM: Kirkwood: Add configuration for MPP12 as GPIO ARM: Kirkwood: Recognize A1 revision of 6282 chip ARM: ux500: update the MOP500 GPIO assignments ...
2012-01-09Merge tag 'cleanup2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Cleanups for the Samsung platforms Various cleanup changes that the device driver changes are built upon. Since the samsung cleanups depend on the device tree series, which depends on the first set of cleanups for tegra. * tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: EXYNOS: Use gpio_request_one ARM: S5PV210: Use gpio_request_one ARM: S3C64XX: Modified according to SPI consolidation work ARM: S5PV210: Modified files for SPI consolidation work ARM: S5P64X0: Modified files for SPI consolidation work ARM: S5PC100: Modified files for SPI consolidation work ARM: S3C64XX: Modified files for SPI consolidation work ARM: SAMSUNG: Consolidation of SPI platform devices to plat-samsung ARM: SAMSUNG: Remove SPI bus clocks from platform data ARM: S5PV210: Add SPI clkdev support ARM: S5P64X0: Add SPI clkdev support ARM: S5PC100: Add SPI clkdev support ARM: S3C64XX: Add SPI clkdev support spi/s3c64xx: Use bus clocks created using clkdev mmc: sdhci-s3c: Use generic clock names for sdhci bus clock options ARM: SAMSUNG: Add lookup of sdhci-s3c clocks using generic names ARM: SAMSUNG: Remove SDHCI bus clocks from platform data ARM: SAMSUNG: Use kmemdup rather than duplicating its implementation ARM: EXYNOS: remove exynos4_scu_enable()
2012-01-09Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Cleanups on various subarchitectures Cleanup patches for various ARM platforms and some of their associated drivers, the bulk of these is for mach-91. Arnd ended up pulling in the restart branch from Russell in order to fix up some simple but annoying merge conflicts. * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits) arm/at91: fix build of stamp9g20 ARM: u300: delete memory.h MAINTAINERS: add maintainer entry for Picochip picoxcell ARM: picoxcell: move io mappings to common.c ARM: picoxcell: don't reserve irq_descs ARM: picoxcell: remove mach/memory.h ARM: at91: delete the pcontrol_g20_defconfig arm/tegra: Remove code that's ifndef CONFIG_ARM_GIC arm/tegra: remove unused defines arm/tegra: fix variable formatting in makefile ARM: davinci: vpif: move code to driver core header from platform ARM: at91/gpio: fix display of number of irq setuped ARM: at91/gpio: drop PIN_BASE ARM: at91/udc: use gpio_is_valid to check the gpio ARM: at91/ohci: use gpio_is_valid to check the gpio ARM: at91/nand: use gpio_is_valid to check the gpio ARM: at91/mmc: use gpio_is_valid to check the gpio ARM: at91/ide: use gpio_is_valid to check the gpio ARM: at91/pata: use gpio_is_valid to check the gpio ARM: at91/soc: use gpio_is_valid to check the gpio ...
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-29 15:00:17 +0000