summaryrefslogtreecommitdiff
path: root/drivers/net/dsa/mv88e6xxx.c
AgeCommit message (Collapse)Author
2014-11-16net: dsa: Centralise code for reading the temperature sensorAndrew Lunn
The method to read the temperature used in the mve6123_61_65 driver can also be used for other chips. Move the code into the shared code base of mv88e6xxx.c. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-30net: dsa: Provide additional RMON statisticsGuenter Roeck
Display sw_in_discards, sw_in_filtered, and sw_out_filtered for chips supported by mv88e6123_61_65 and mv88e6352 drivers. The variables are provided in port registers, not the normal status registers. Mark by adding 0x100 to the register offset and add special handling code to mv88e6xxx_get_ethtool_stats. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-30net: dsa/mv88e6123_61_65: Add support for reading switch registersGuenter Roeck
The infrastructure can now report switch registers to ethtool. Add support for it to the mv88e6123_61_65 driver. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-30net: dsa: Add support for Marvell 88E6352Guenter Roeck
Marvell 88E6352 is mostly compatible to MV88E6123/61/65, but requires indirect phy access. Also, its configuration registers are a bit different. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-17dsa: Fix conversion from host device to mii busGuenter Roeck
Commit b4d2394d01bc ("dsa: Replace mii_bus with a generic host device") replaces mii_bus with a generic host_dev, and introduces dsa_host_dev_to_mii_bus() to support conversion from host_dev to mii_bus. However, in some cases it uses to_mii_bus to perform that conversion. Since host_dev is not the phy bus device but typically a platform device, this fails and results in a crash with the affected drivers. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff81781d35>] __mutex_lock_slowpath+0x75/0x100 PGD 406783067 PUD 406784067 PMD 0 Oops: 0002 [#1] SMP ... Call Trace: [<ffffffff810a538b>] ? pick_next_task_fair+0x61b/0x880 [<ffffffff81781de3>] mutex_lock+0x23/0x37 [<ffffffff81533244>] mdiobus_read+0x34/0x60 [<ffffffff8153b95a>] __mv88e6xxx_reg_read+0x8a/0xa0 [<ffffffff8153b9bc>] mv88e6xxx_reg_read+0x4c/0xa0 Fixes: b4d2394d01bc ("dsa: Replace mii_bus with a generic host device") Cc: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Alexander Duyck <alexander.h.duyck@redhat.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15dsa: Replace mii_bus with a generic host deviceAlexander Duyck
This change makes it so that instead of passing and storing a mii_bus we instead pass and store a host_dev. From there we can test to determine the exact type of device, and can verify it is the correct device for our switch. So for example it would be possible to pass a device pointer from a pci_dev and instead of checking for a PHY ID we could check for a vendor and/or device ID. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13net: DSA: Marvell mv88e6171 switch driverAndrew Lunn
This is the Marvell driver with some cleanups by Claudio Leite and myself. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Cc: Claudio Leite <leitec@staticky.com> Signed-off-by: Claudio Leite <leitec@staticky.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-30net: dsa: update DSA drivers to use ds_to_privFlorian Fainelli
Use the helper function to retrieve the driver private context instead of using (void *)(ds + 1). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-10DSA: Convert spaces to tabs where appropriateBarry Grussling
Fix DSA whitespace issues reported by checkpatch.pl Signed-off-by: Barry Grussling <barry@grussling.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-10DSA: Convert printk calls to netdev_info callsBarry Grussling
Convert DSA printk calls to netdev_info calls as recommended by checkpatch.pl. Signed-off-by: Barry Grussling <barry@grussling.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-10DSA: Convert repeated msleep calls to timeoutsBarry Grussling
Convert DSA msleep calls to timeout/usleep_range calls as reported by checkpatch.pl. Signed-off-by: Barry Grussling <barry@grussling.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-10DSA: Convert DSA comments to network-style commentsBarry Grussling
Convert DSA driver comments to network-style comments as reported by checkpatch.pl. Fix spelling error. Signed-off-by: Barry Grussling <barry@grussling.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-24drivers/net: dsa/mv88e6xxx.c files need linux/module.hPaul Gortmaker
An implicit instance of module.h leaked back into existence and was masking the fact that these drivers weren't calling out the include for itself. Fix the drivers before we remove the implicit include path via net/netprio_cgroup.h file. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29dsa: Move switch drivers to new directory drivers/net/dsaBen Hutchings
Support for specific hardware belongs under drivers/net/ not net/. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-27 07:53:38 +0000