summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/i40e/i40e_adminq.c
AgeCommit message (Collapse)Author
2014-06-06i40e/i40evf: check AQ register for valid dataKamil Krawczyk
B0 Si blocks AQ registers when in Blank Flash mode - write is dropped, read gives 0xDEADBEEF. Introduce a simple check for a correct value in one of the AQ registers to be sure that AQ was configured correctly. Without this check we get into an endless loop while trying to send GetVersion AQ cmd. Change-ID: I00102b8c5fa6c16d14289be677aafadf87f10f0d Signed-off-by: Kamil Krawczyk <kamil.krawczyk@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40e: relax the firmware API version checkShannon Nelson
As long as the Firmware isn't reporting a higher API major version number than what the driver knows about, the driver does not need to worry as much about greater minor numbers. The API changes minor numbers when things get added to the API, but no existing structs or calls are changed. The driver has the option of warning that the minor numbers don't match. This will allow a little more flexibility in handling newer NICs and NVMs in the field. Change-ID: I5302acd2d147a2992328991ee7223b2ff39c8741 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-04-21i40e/i40evf: add tracking to NVM busy stateShannon Nelson
The NVM updates take some time and are asynchronous actions that signal their completion with an AdminQ event. This code tracks when there is an NVM update outstanding and won't allow a new update command until a completion event is received from the current update. Change-ID: Ic132fe16bd9dc09b002ed38297a877c1a01553ce Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-02-13i40evf: clean up memsetsMitch Williams
As politely pointed out by Dave Miller, calls to memset do not need a void pointer cast. Additionally, it is preferred to use sizeof(*the actual object) instead of sizeof(type). Change-ID: Id6a02429b7040111531f3865ea03fbe619167cb3 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Kevin Scott <kevin.c.scott@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-10i40e: Cleanup Doxygen warningsJeff Kirsher
These changes make Doxygen/kdoc work correctly without warnings. Change-ID: I2941f38860be805ff7548d84dae35754c83f1d62 Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
2014-01-10i40e: use assignment instead of memcpyMitch Williams
These instances were found by coccinelle/spatch, and can use struct assignment instead of memcpy. Change-ID: Idc23c3599241bf8a658bda18c80417af3fbfee66 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-01-09i40e: remove interrupt on AQ errorShannon Nelson
Since nearly everything we do is synchronous, using the interrupt-on-error bit is unnecessary and causing unneeded interrupts. If anyone wants to use the bit they can turn it on in individual AQ requests using the cmd_details parameter. Change-ID: I4690a9c561d3e0836aeadb4f88f8a8702b1d1366 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-01-09i40e: release NVM resource reservation on startupShannon Nelson
Call AQ to release any reservation held by this PF on the NVM resource lock on startup, in order to clear anything that might have been left over from a previous run. The lock is only cleared by the requestor calling for it to be cleared, on power-on, or firmware reset. This should help limit the need for rebooting a customer machine if something goes wrong on a firmware update or some other action. Change-ID: I8c8473e601d4ef512dda7baa77a6e75f2e5fea49 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-01-09i40e: Fix GPL headerGreg Rose
The GPL header included in each file in the i40e driver doesn't need to include the "this program" text since this driver is already part of the larger kernel. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-01-07i40e: correctly setup ARQ descriptorsMitch Williams
When cleaning descriptors, we must set up ALL fields, not just the DMA address. The initial setup does this correctly, but not the cleanup code, so the firmware would process the ring exactly once and then fail. Change-ID: I2930b83c76194b3016a8ac0fa693f9a573995640 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-01-07i40e: remove redundant AQ enableKamil Krawczyk
The admin queue length register is updated in config_a<sq|rq>_regs functions. We should not update it again, as we will trigger firmware to init the AQ again. In this case firmware will lose the information about the AQ Rx tail position and will see Rx queue as full (no free desc for FW to use). Signed-off-by: Kamil Krawczyk <kamil.krawczyk@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-01-07i40e: whitespace paren and comment tweaksShannon Nelson
Addresses a few code format issues that have crept in over time. Change-Id: I1a62cbd16b29a218a933b0f7176abe748f9615e8 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-01-07i40e: update firmware api to 1.1Shannon Nelson
The firmware's AdminQ interface has matured a little, so update the code to use the new fields and values. Change-Id: I8fcd7b443f268dcf9346bd6a9e940fe9c2958891 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-01-06i40e: Admin queue shutdown fixesAnjali Singhai Jain
Always call the AQ call to shutdown the queue in the shutdown path. Check ASQ is alive before issuing the AQ command since we might be resetting to recover from a bad state in which case we should not issue the AQ command. Use the register variable for length so it can be used by PF, VF and GL AQ commands. Change-Id: Ic3d305687ea3f1a6afa84e864b7a27bd38a9af32 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-01-04i40e: keep allocated memory in structsDavid Cassard
Save both a pointer to memory and the length in order to store all info about allocated kernel memory. This patch changes some adminq allocations to preserve the full i40e_dma_mem/i40e_virt_mem structs for every allocation. Change-Id: Ibcf96159aba4ba61f839d16d87d19478df28e630 Signed-off-by: David Cassard <david.g.cassard@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-12-17i40e: make functions static and remove dead codeStephen Hemminger
Make local functions static in the file they are used. Remove functions i40e_aq_add_vlan and i40e_aq_remove_vlan since they are not used anywhere by current code. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-12-05i40e: retry call on timeoutShannon Nelson
If the admin queue times out, retry some more to make driver load and reset more robust. Change-Id: I45c977b3d10a62c770d6072659ec27834849ca33 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-12-05i40e: simplify aq head-tail-len setupsShannon Nelson
Use more virtual registers to simplify code flows. Change-Id: I32cff3818c5ca3a3792487ba4fed8f1d0ea6145a Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-12-05i40e: clear AQ head and tail registersShannon Nelson
During admin queue shutdown clear some more registers explicitly. Change-Id: Ifb235c691e1c55e76bf66e0642207f464153d05a Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-09-27i40e: clean up coccicheck reported errorsJesse Brandeburg
coccicheck shows: drivers/net/ethernet/intel/i40e/i40e_adminq.c:704:2-8: Replace memcpy with struct assignment drivers/net/ethernet/intel/i40e/i40e_adminq.c:763:1-7: Replace memcpy with struct assignment drivers/net/ethernet/intel/i40e/i40e_adminq.c:810:2-8: Replace memcpy with struct assignment drivers/net/ethernet/intel/i40e/i40e_common.c:510:2-8: Replace memcpy with struct assignment Fix each of them with a *a = *b; Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-09-11i40e: init code and hardware supportJesse Brandeburg
This patch implements the hardware specific init and management. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> CC: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com> CC: e1000-devel@lists.sourceforge.net Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-25 03:36:54 +0000