summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/i40evf
AgeCommit message (Collapse)Author
2014-07-02i40evf: invite vector 0 to the interrupt partyMitch Williams
The i40evf_irq_enable and i40evf_fire_sw_interrupt functions were unfairly discriminating against MSI-X vector 0, just because it doesn't handle traffic. That doesn't mean it's not essential to the operation of the driver. This change allows the watchdog to fire vector 0 via software, which makes the driver tolerant of dropped interrupts on that vector. Buck up, vector 0! You can be part of our gang! Change-ID: I37131d955018a6b3e711e1732d21428acd0d767e Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-02i40e/i40evf: Force a shifted '1' to be unsignedPaul M Stillwell Jr
Force a shifted '1' to be unsiged to avoid shifting a signed int Change-ID: I688cbd082af0f2e1df548fda25847a5ca04babcf Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-02i40evf: don't violate scopeMitch Williams
Move a declaration up one level so we don't dereference it out of scope. This didn't cause any panics, but the details->async field would mysteriously disappear, causing unnecessary delays when sending AQ commands. Also, the code is just plain wrong. Change-ID: I753f64f13c55e5d75ea4351e29b14fb53b2f0104 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-02i40e/i40evf: Do not free the dummy packet buffer synchronouslyAnjali Singhai Jain
The HW still needs to consume it and freeing it in the function that created it would mean we will be racing with the HW. The i40e_clean_tx_ring() routine will free up the buffer attached once the HW has consumed it. The clean_fdir_tx_irq function had to be fixed to handle the freeing correctly. Cases where we program more than one filter per flow (Ipv4), the code had to be changed to allocate dummy buffer multiple times since it will be freed by the clean routine. This also fixes an issue where the filter program routine was not checking if there were descriptors available for programming a filter. Change-ID: Idf72028fd873221934e319d021ef65a1e51acaf7 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-01i40e/i40evf: Bump i40e to 0.4.19 and i40evf to 0.9.38Catherine Sullivan
Bump versions. Change-ID: Id5082d7c3995fbddd22b3e303d804c86fcd240a3 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-01i40evf: change branding stringMitch Williams
Add a slash to the branding string to reduce confusion and match up with our other marketing materials. Change-ID: I8229e8c3e43083b7a29c859a250f8d2d4dc46b9e Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-01i40e/i40evf: initialize context descriptorJesse Brandeburg
Driver needs to initialize all members of context descriptor. Stale data is possible otherwise. Change-ID: Idc6b53af45583509da42d5ec0824cbaf78aee64f Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-30i40e/i40evf: add ASQ write back timeout variable to AQ structureKamil Krawczyk
Add new variable defining ASQ command write back timeout to allow for dynamic modification of this timeout. Initialize it on AQ initialize routine with default value, vary it on device ID. Change-ID: I5c9908f9d7c5455634353b694a986d6f146d1b9d Signed-off-by: Kamil Krawczyk <kamil.krawczyk@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-30i40evf: set flags before sending messageMitch Williams
In some circumstances, the firmware could beat us to the punch, and the reply from the PF would come back before we were able to properly modify the aq_pending and aq_required flags. This would mess up the flags and put the driver in an indeterminate state, much like Schrödinger's cat. However, unlike the cat, the driver is definitely dead. To fix this, simply set the flags before sending the request to the AQ. This way, it won't matter if the interrupt comes back too soon. Change-ID: I9784655e475675ebcb3140cc7f36f4a96aaadce5 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-30i40e/i40evf: clear aq bah-bal on shutdownShannon Nelson
Clear the AQ BAH and BAL registers on a clean shutdown to help make sure all is tidy when the driver is done. Change-ID: I393e92680247daa52a8e00bab183213672d73578 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-30i40e/i40evf: Add base address registers to aq structShannon Nelson
Add the Base Address High and Low to the admin queue struct to simplify another bit of "which context" logic in the config routines. Change-ID: Iae195a7da3baffc1a9d522119e1e2b427068ad07 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-26i40evf: resend FW request if no responseMitch Williams
Sometimes the firmware will not indicate an error but fail to pass a message between the VF and the PF driver. If this happens, just resend the request. This fixes an initialization failure if many VFs are instantiated at the same time and the VF module is autoloaded. Change-ID: Idd1ad8da2fd5137859244685c355941427d317d7 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-26i40evf: fix typoMitch Williams
Correct a missing word in a log message. Change-ID: Id94da7d9f842382d073b3947e0b616503e2f8e91 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-26i40evf: return more useful error informationMitch Williams
When verifying the API version (which is the first time the driver communicates with the firmware and thus the PF driver), there are many ways in which a failure can occur. There may be an error from the firmware, there may be unresponsive firmware, there may be an error from the PF driver, etc, etc. Make this function return more useful information, instead of just -EIO. Propagate FW errors back to the caller, and log a message if the PF sends an invalid reply. Change-ID: I3e9135a2b80f7acdb855f62f12b2b2668c9a8951 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-26i40evf: don't stop watchdog if it hasn't startedMitch Williams
If the VF driver fails to complete early init, then rmmod can cause a softlock when the driver tries to stop a watchdog timer that never even got initialized. Add a check to see if the timer is actually initialized before stopping it. Change-ID: Id9d550aa8838e07f4b02afe7bc017ef983779efc Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-26i40e/i40evf: Big endian fixes for handling HMCPaul M Stillwell Jr
Fix HMC handling for big endian architectures. Change-ID: Id8c46fc341815d47bfe0af8b819f0ab9a1e9e515 Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-24i40e/i40evf: Bump i40e to 0.4.17 and i40evf to 0.9.36Catherine Sullivan
Bump versions. Change-ID: I47fc3433240800cd823ff512f3015822277b0d20 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-24i40e/i40evf: remove reserved typeJesse Brandeburg
One of the PCTYPES that was moved to a reserved value wasn't removed from the code. Change-ID: I31fafe6d79c5f5128179979af5eaafa8c0cd62fe Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-20i40e/i40evf: Bump i40e to 0.4.13 and i40evf to 0.9.35Catherine Sullivan
Bump versions. Change-ID: Ifaed5404b9e953a11f4c88953ffe4bc8937705f1 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-20i40e/i40evf: modify debug prints to avoid seg faultsKamil Krawczyk
Some AQ debug prints needs be moved around or do additional checks so they will not cause our tool applications to cause segmentation faults. The tools run in user space and we need to correctly reference kernel space memory. Change-ID: Ia2ac4076f576b805f350453fd50ad69c2a91ab9a Signed-off-by: Kamil Krawczyk <kamil.krawczyk@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-20i40e/i40evf: Update RSS configurationCarolyn Wyborny
This patch changes the RSS configuration to set table size and write to hardware to confirm RSS table size being used. Change-ID: I455a4c09c9dd479f5791ee1f09fdc83ff9908df5 Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-19i40evf: fix off-by-oneMitch Williams
The loop in i40evf_get_rxfh_indir was only reading fifteen registers, not all sixteen. Change the matching loop in i40evf_set_rxfh_indir at the same time to make the code more consistent. Change-ID: I6c182287698e742d1f6ca1a4bcc43cc08df6e1de Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-19i40e/i40evf: Reset Head and Tail on AQ initializationMichal Kosiarz
Reset head and tail on admin queue initialization where H/T are not reset by HW. Change-ID: I6db8a2dd3f05ce66410a92cce016191add04760e Signed-off-by: Michal Kosiarz <michal.kosiarz@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-19i40e/i40evf: i40e_register.h updateAnjali Singhai Jain
This updates the register file for new hardware. The format of the file has changed requiring drivers to declare I40E_MASK. I40E_MASK is to be used with 32 bit registers. This patch also updates the drivers to accommodate the register changes. Change-ID: If9bc8d736391024cbf99054efe50f9acc12ee4f1 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-11i40e/i40evf: Bump i40e to version 0.4.10 and i40evf to 0.9.34Catherine Sullivan
Bump versions. Change-ID: Ic4a84354955061ca18321b1e97c9c30fe1563b5c Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-11i40e/i40evf: Add Flow director stats to PF statsAnjali Singhai Jain
Add members to stat struct to keep track of Flow director ATR and SideBand filter packet matches. Change-ID: Ibbb31a53c7adcc2bb96991dd80565442a2f2513c Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-11i40e/i40evf: remove FTYPEJesse Brandeburg
This change drops the FTYPE field from the Rx descriptor, to match the hardware implementation. Change-ID: I66d31d2b43861da45e8ace4fb03df033abe88bab Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-11i40evf: check admin queue error bitsMitch Williams
FW can indicate any admin queue error states to the driver via some bits in the length registers. Each time we process an admin queue message, check these bits and log any errors we find. Since the VF really can't do much, we just print the message and depend on the PF driver to clear things up on our behalf. Change-ID: I92bc6c53ce3b4400544e0ca19c5de2d27490bd0d Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-11i40e/i40evf: User ether_addr_copy instead of memcpyGreg Rose
Linux gives us a function to copy Ethernet MAC addresses, let's use it. Change-ID: I0c861900029ca5ea65a53ca39565852fb633f6fd Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-11i40evf: don't go further downMitch Williams
If the device is down, there's no place to go but up, so don't try to go down even more. This prevents a CPU soft lock in napi_disable(). Change-ID: I8b058b9ee974dfa01c212fae2597f4f54b333314 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-11i40e/i40evf: AdminQ API update for new FWShannon Nelson
Add set_pf_context, replace set_phy_reset with set_phy_debug, add nvm_config_read/write, remove nvm_read/write_reg_se and add some PHY types. With these changes we bump the API version to 1.2. Change-ID: I4dc3aec175c2316f66fc9b726b3f7d594699d84e Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-11i40e/i40evf: set headwb Tx context flags and use themAshish Shah
Set appropriate fields in Tx queue configuration virtchnl message to pf to enable headwb and setup headwb addr. Then use that info from the VF to set headwb and headwb_addr instead of always enabling them. Change-ID: I7d393d1b2b07f0f3355b3a4f7c2d3c6ee3b0d622 Signed-off-by: Ashish Shah <ashish.n.shah@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-09i40e/i40evf: bump version to 0.4.7 for i40e and 0.9.31 for i40evfShannon Nelson
Bumpity and Fred Worm say it's time to change the numbers again. Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Change-ID: I658731d022ea23cedede4be2bfecd8b4cc68d270 Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-09i40e/i40evf: add PPRS bit to error bits and fix bug in Rx checksumJesse Brandeburg
The driver was not marking packets with bad checksums correctly, especially IPv6 packets with a bad checksum. To do this correctly we need a define that may be set by hardware in rare cases. Change-ID: I1a997b72b491ded27a78ac3bce1197b2d2611130 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40evf: Fix function headerCatherine Sullivan
Fix function header comment to have the correct function name. Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40e/i40evf: Bump build versionCatherine Sullivan
Bump i40e to 0.4.5 and i40evf to 0.9.29. Change-ID: I9faca5544446518c5425612e733499cf16ef20a1 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40e/i40evf: remove deprecated device IDsJesse Brandeburg
Remove two device IDs 1582 and 1573, because they will not be shipped. Change-ID: Ica2e550b5b21a69e3f353eba2fe5e1c532a548c4 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40e/i40evf: fix poll weightJesse Brandeburg
Fix a coding error where during the registration for NAPI the driver requested 256 budget. The max recommended value for this is NAPI_POLL_WEIGHT or 64. Change-ID: I03ea1e2934a84ff1b5d572988b18315d6d91c5c6 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40e/i40evf: fix TSO accountingJesse Brandeburg
The TSO logic in the transmit path had some assumptions that have been broken now that the kernel can send as much as 32kB in a single skb->frag[.] entry, even on a system with 4kB pages. This fixes the assumptions and allows the kernel to operate as efficiently as possible with both SENDFILE and SEND. In addition, the hardware limit of data contained in a descriptor is changed to the next power of two below where it currently is in order to align to a power of two value, preventing a single byte of data in a descriptor. Change-ID: I6af1f0b87c1458e10644dbd47541591075a52651 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40e/i40evf: remove chatty reset messagesMitch Williams
Both the PF side and the VF side of the VF reset process are too noisy. We already warn the user that a reset is happening, and that is sufficient. Because some of these message are inside if statements, we have to rejigger the brackets at the same time to keep our coding style consistent. Change-ID: Id175562fb0ec7c396d9de156b4890e136f52d5f4 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40evf: use correct format for printing MAC addressesMitch Williams
The correct format is %pM, not %pMAC. Change-ID: Idb335723a966fe56db3a72b9c07c08ca66f9db3c Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40evf: clean up log message formattingMitch Williams
Clean up inconsistent log messages, mostly related to punctuation. Based on the dogma that "kernel messages are not sentences", remove all trailing periods. Reword a few of the messages to make them less sentence-like. Change-ID: Ibd849aa7623a77549b0709988c66ab05d1311472 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40evf: remove bogus commentMitch Williams
This comment is just plain false. VF drivers require MSI-X or they won't get interrupts at all. Change-ID: Iaea5e30b6926948aa834a3c506d9a9223d9e3e29 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40evf: remove unnecessary log messagesMitch Williams
We don't need to print log messages when we encounter an out-of-memory condition, as the allocator will do this for us. Also, remove a Tx hang message that duplicates the one emitted by the netdev layer, and a duplicate message in the watchdog. Change-ID: If2056e6135fe248f66ea939778f9895660f4d189 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40e/i40evf: Clean up a few thingsAkeem G Abodunrin
1. There is no ixgbe_watchdog_task function in the driver, so change the comment to the correct function name, i40e_watchdog_subtask. 2. Remove num_msix_entries from interrupt set_up routine because it is never used. 3. Remove some TBD comments that are not needed. Change-ID: I37697a04007074b797f85fd83d626672e4df1ad1 Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40e/i40evf: Fix code to accommodate i40e_register.h changesAnjali Singhai Jain
Remove use of registers no longer supported. Change-ID: I9d27399091cea78a926489d94f958edd762f5a20 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-08i40e/i40evf: fix rx descriptor statusJesse Brandeburg
As reported by Eric Dumazet, the driver is not masking the right bits in the receive descriptor before it starts checking them. This patch extends the mask to allow for the right bits to be checked, and fixes the issue permanently via a define. CC: Eric Dumazet <eric.dumazet@gmail.com> Change-ID: I3274f7619057a950f468143e6d7e11b129f54655 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40e/i40evf: Bump build versionCatherine Sullivan
Bump i40e to 0.4.3 and i40evf to 0.9.27. Change-ID: I4141e9f8615bdcfa3b1b5ecbc2ac62603a03b7ad Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40e/i40evf: add Tx pre queue disable functionMatt Jared
Add a function which indicates our intention to enable or disable a particular Tx queue. Also add a function to notify the device's Tx unit that we're about to enable or disable a Tx queue. Change-ID: I6adf3cbb5bb3e3c984d1ec969e06577c19ef296d Signed-off-by: Matt Jared <matthew.a.jared@intel.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40e/i40evf: check AQ register for valid dataKamil Krawczyk
B0 Si blocks AQ registers when in Blank Flash mode - write is dropped, read gives 0xDEADBEEF. Introduce a simple check for a correct value in one of the AQ registers to be sure that AQ was configured correctly. Without this check we get into an endless loop while trying to send GetVersion AQ cmd. Change-ID: I00102b8c5fa6c16d14289be677aafadf87f10f0d Signed-off-by: Kamil Krawczyk <kamil.krawczyk@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-20 19:30:29 +0000