summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/igb
AgeCommit message (Collapse)Author
2012-09-22ptp: link the phc device to its parent deviceRichard Cochran
PTP Hardware Clock devices appear as class devices in sysfs. This patch changes the registration API to use the parent device, clarifying the clock's relationship to the underlying device. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-22igb: Use dma_unmap_addr and dma_unmap_len definesAlexander Duyck
This change is meant to improve performance on systems that do not require the DMA unmap calls. On those systems we do not need to make use of the unmap address for Tx or the unmap length so we can drop both thereby reducing the size of the Tx buffer info structure. In addition I have changed the logic to check for unmap length instead of unmap address when checking to see if a buffer needs to be unmapped from DMA use. The reasons for this change is that on some platforms it is possible to receive a valid DMA address of 0 from an IOMMU. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-22igb: Simplify how we populate the RSS keyAlexander Duyck
Instead of storing the RSS key as a character array we can simplify the configuration by making it a u32 array. This allows us to just write one value per register without any unnecessary operations to construct the value. This change will produce the same exact key, the only difference is that I translated the u8 array to a u32 array which will be correctly ordered on writes to hardware by the cpu_to_le32 operations that are built into the writel calls. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-22igb: Change how we populate the RSS indirection tableAlexander Duyck
This patch cleans up our RSS indirection table configuration so that we generate the same table regardless of CPU endianness. In addition it changes the table setup so that instead of doing a modulo based setup it is instead a divisor based setup. The advantage to this is that we should be able to take the Rx hash and compute the Rx queue with very little CPU overhead if needed. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-22igb: Change Tx cleanup loop to do/while instead of forAlexander Duyck
This change makes it so that Tx cleanup is done in a do/while loop instead of a for loop. The main motivation behind this is the fact that we should never be invoked with a budget less than 1 so we can skip checking the budget before processing the first descriptor. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-22igb: Remove logic that was doing NUMA pseudo-aware allocationsAlexander Duyck
This change removes the code that was doing the NUMA allocations for the q_vectors, rings, and ring resources. The problem is the logic used assumed that the NUMA nodes were always interleved and that is not always the case. At some point I hope to add this functionality back in a more controlled manner in the future. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-22igb: Fix stats output on i210/i211 parts.Carolyn Wyborny
Due to a hardware issue, on i210 and i211 parts, the TNCRS statistic provides an invalid value. This patch changes the update stats function to increment the stat only for non-i210/i211 parts. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-22igb: Change how we check for pre-existing and assigned VFsStefan Assmann
Adapt the pre-existing and assigned VFs code to the ixgbe way introduced in commit 9297127b9cdd8d30c829ef5fd28b7cc0323a7bcd. Instead of searching the enabled VFs we use pci_num_vf to determine enabled VFs. By comparing to which PF an assigned VF is owned it's possible to decide whether to leave it enabled or not. Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Acked-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Robert Garrett <robertx.e.garrett@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-20igb: Support to enable EEE on all eee_supported devicesAkeem G. Abodunrin
Current implementation enables EEE on only i350 device. This patch enables EEE on all eee_supported devices. Also, configured LPI clock to keep running before EEE is enabled on i210 and i211 devices. Signed-off-by: Akeem G. Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-20igb: Remove artificial restriction on RQDPC stat readingAlexander Duyck
For some reason the reading of the RQDPC register was being artificially limited to 4K. Instead of limiting the value we should read the value and add the full amount. Otherwise this can lead to a misleading number of dropped packets when the actual value is in fact much higher. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-17igb: Add 1588 support to I210/I211.Matthew Vick
Previously I210/I211 followed the same code flow as 82580/I350 for 1588. However, since the register sets have changed, we must update the implementation to accommodate the register changes. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Matthew Vick <matthew.vick@intel.com> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-17igb: Prevent dropped Tx timestamps via work items and interrupts.Matthew Vick
In rare circumstances, it's possible a descriptor writeback will occur before a timestamped Tx packet will go out on the wire, leading to the driver believing the hardware failed to timestamp the packet. Schedule a work item for 82576 and use the available time sync interrupt registers on 82580 and above to account for this. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-17igb: Store the MAC address in the name in the PTP struct.Matthew Vick
Change the name of the adapter in the PTP struct to enable easier correlation between interface and PTP device. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Matthew Vick <matthew.vick@intel.com> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-17igb: Correct PTP support query from ethtool.Matthew Vick
Update ethtool_get_ts_info to not report any supported functionality on 82575 and add support for V2 Sync and V2 Delay packets. In the case where CONFIG_IGB_PTP is not defined, we should be reporting default values. v2: Correct the function to return EOPNOTSUPP when there is no PTP support or the device does not support PTP. Also fix minor whitespace issue. Signed-off-by: Matthew Vick <matthew.vick@intel.com> Cc: Richard Cochran <richardcochran@gmail.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-17igb: Update PTP function names/variables and locations.Matthew Vick
Where possible, move PTP-related functions into igb_ptp.c and update the names of functions and variables to match the established coding style in the files and specify that they are PTP-specific. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-17igb: Tidy up wrapping for CONFIG_IGB_PTP.Matthew Vick
For users without CONFIG_IGB_PTP=y, we should not be compiling any PTP code into the driver. Tidy up the wrapping in igb to support this. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Matthew Vick <matthew.vick@intel.com> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-13Merge commit 'v3.6-rc5' into nextBjorn Helgaas
* commit 'v3.6-rc5': (1098 commits) Linux 3.6-rc5 HID: tpkbd: work even if the new Lenovo Keyboard driver is not configured Remove user-triggerable BUG from mpol_to_str xen/pciback: Fix proper FLR steps. uml: fix compile error in deliver_alarm() dj: memory scribble in logi_dj Fix order of arguments to compat_put_time[spec|val] xen: Use correct masking in xen_swiotlb_alloc_coherent. xen: fix logical error in tlb flushing xen/p2m: Fix one-off error in checking the P2M tree directory. powerpc: Don't use __put_user() in patch_instruction powerpc: Make sure IPI handlers see data written by IPI senders powerpc: Restore correct DSCR in context switch powerpc: Fix DSCR inheritance in copy_thread() powerpc: Keep thread.dscr and thread.dscr_inherit in sync powerpc: Update DSCR on all CPUs when writing sysfs dscr_default powerpc/powernv: Always go into nap mode when CPU is offline powerpc: Give hypervisor decrementer interrupts their own handler powerpc/vphn: Fix arch_update_cpu_topology() return value ARM: gemini: fix the gemini build ... Conflicts: drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c drivers/rapidio/devices/tsi721.c
2012-09-12Merge branch 'pci/stephen-const' into nextBjorn Helgaas
* pci/stephen-const: make drivers with pci error handlers const scsi: make pci error handlers const netdev: make pci_error_handlers const PCI: Make pci_error_handlers const
2012-09-07netdev: make pci_error_handlers constStephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-09-04igb: Supported and Advertised Pause FrameAkeem G. Abodunrin
This patch add ethtool supports for Supported and Advertised Pause Frame, based on Adapter Flow Control settings. Signed-off-by: Akeem G. Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-04igb: reduce Rx header sizeEric Dumazet
Reduce skb truesize by 256 bytes. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-04igb: Add loopback test support for i210Carolyn Wyborny
Early release of i210 devices had the loopback test of the ethtool self-test disabled. This patch enables the loopback test for i210 devices. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-08-23igb: Use PCI Express Capability accessorsJiang Liu
Use PCI Express Capability access functions to simplify igb driver. [bhelgaas: split e1000e and igb into separate patches] Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-08-22Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next Jeff Kirsher says: ==================== This series contains updates to ethtool.h, e1000, e1000e, and igb to implement MDI/MDIx control. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-21igb: update to allow reading/setting MDI stateJesse Brandeburg
This is the implementation for igb to allow forcing MDI state via ethtool, allowing users to work around some improperly behaving switches. Forcing in this driver is for now only allowed when auto-neg is enabled. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown aaron.f.brown@intel.com Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-08-21igb: implement 580 MDI setting supportJesse Brandeburg
In order for igb to support MDI setting support via ethtool this code is needed to allow setting the MDI state via software. This is in regards to the related ethtool patch Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Aaron Brown aaron.f.brown@intel.com Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-08-09igb: Fix register defines for all non-82575 hardwareAlexander Duyck
It looks like the register defines for DCA were never updated after going from 82575 to 82576. This change addresses that by updating the defines. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
2012-08-09igb: fix panic while dumping packets on Tx hang with IOMMUEmil Tantilov
This patch resolves a "BUG: unable to handle kernel paging request at ..." oops while dumping packet data. The issue occurs with IOMMU enabled due to the address provided by phys_to_virt(). This patch avoids phys_to_virt() by making using skb->data and the address of the pages allocated for Rx. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
2012-08-07igb: add delay to allow igb loopback test to succeed on 8086:10c9Stefan Assmann
Some 8086:10c9 NICs have a problem completing the ethtool loopback test. The result looks like this: ethtool -t eth1 The test result is FAIL The test extra info: Register test (offline) 0 Eeprom test (offline) 0 Interrupt test (offline) 0 Loopback test (offline) 13 Link test (on/offline) 0 A bisect clearly points to commit a95a07445ee97a2fef65befafbadcc30ca1bd145. However that seems to only trigger the bug. While adding some printk the problem disappeared, so this might be a timing issue. After some trial and error I discovered that adding a small delay just before igb_write_phy_reg() in igb_integrated_phy_loopback() allows the loopback test to succeed. I was unable to figure out the root cause so far but I expect it to be somewhere in the following executing path igb_integrated_phy_loopback ->igb_write_phy_reg_igp ->igb_write_phy_reg_mdic ->igb_acquire_phy_82575 ->igb_acquire_swfw_sync_82575 The problem could only be observed on 8086:10c9 NICs so far and not all of them show the behaviour. I did not restrict the workaround to this type of NIC as it should do no harm to other igb NICs. With the patch below the loopback test succeeded 500 times in a row using a NIC that would otherwise fail. Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
2012-08-04igb: don't break user visible strings over multiple lines in igb_ethtool.cJesper Juhl
Even when they go beyond 80 characters, user visible strings should be on one line to make them easy to grep for. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
2012-08-04igb: correct hardware type (i210/i211) check in igb_loopback_test()Jesper Juhl
In the original code ... if ((adapter->hw.mac.type == e1000_i210) || (adapter->hw.mac.type == e1000_i210)) { ... the second check of 'adapter->hw.mac.type' is pointless since it tests for the exact same value as the first. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
2012-08-04igb: Fix for failure to init on some 82576 devices.Carolyn Wyborny
Move nvm invalid size check to before size assigned by mac_type for 82575 and later parts in get_invariants function. This fixes a problem found on some 82576 devices where the part will not initialize because the nvm_read function pointer ends up getting assigned to the incorrect function. Reported By: Stefan Assmann <sassmann@redhat.com> Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
2012-07-31netvm: propagate page->pfmemalloc from skb_alloc_page to skbMel Gorman
The skb->pfmemalloc flag gets set to true iff during the slab allocation of data in __alloc_skb that the the PFMEMALLOC reserves were used. If page splitting is used, it is possible that pages will be allocated from the PFMEMALLOC reserve without propagating this information to the skb. This patch propagates page->pfmemalloc from pages allocated for fragments to the skb. It works by reintroducing and expanding the skb_alloc_page() API to take an skb. If the page was allocated from pfmemalloc reserves, it is automatically copied. If the driver allocates the page before the skb, it should call skb_propagate_pfmemalloc() after the skb is allocated to ensure the flag is copied properly. Failure to do so is not critical. The resulting driver may perform slower if it is used for swap-over-NBD or swap-over-NFS but it should not result in failure. [davem@davemloft.net: API rename and consistency] Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: David S. Miller <davem@davemloft.net> Cc: Neil Brown <neilb@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Eric B Munson <emunson@mgebm.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Mel Gorman <mgorman@suse.de> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-21igb: reset PHY in the link_up process to recover PHY setting after power down.Akeem G. Abodunrin
There was a previous patch to resolve issue with 82576 losing PHY setting after PHY power down. However that previous implementation triggered speed mismatch and occasional link lost. Now, this patch resolves both initial PHY setting and speed mismatch issues. Signed-off-by: Akeem G. Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-07-16ethernet: Use eth_random_addrJoe Perches
Convert the existing uses of random_ether_addr to the new eth_random_addr. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10drivers/net/ethernet: Fix (nearly-)kernel-doc comments for various functionsBen Hutchings
Fix incorrect start markers, wrapped summary lines, missing section breaks, incorrect separators, and some name mismatches. Delete a few that are content-free. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/usb/qmi_wwan.c net/batman-adv/translation-table.c net/ipv6/route.c qmi_wwan.c resolution provided by Bjørn Mork. batman-adv conflict is dealing merely with the changes of global function names to have a proper subsystem prefix. ipv6's route.c conflict is merely two side-by-side additions of network namespace methods. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-20igb: Version bumpCarolyn Wyborny
This patch updates the igb version to 4.0.1. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-20igb: Update firmware info outputCarolyn Wyborny
Our NVM image creation tools have evolved over the years and there are multiple versions contained in them, depending on the tool used to create them. This patch outputs the NVM versions available in ethtool -i output. rc2: (not sure why others show in log but not in the message) Added additional call to igb_set_fw_version per Community feedback. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-20igb: Streamline RSS queue and queue pairing assignment logic.Matthew Vick
Rather than spread out the complexity of the RSS queue and queue pairing assignment logic, place it all in one location for simplicity and readability. Signed-off-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-20igb: Support the get_ts_info ethtool method.Carolyn Wyborny
Based on original patch from Richard Cochran <richardcochran@gmail.com> Original patch caused build errors without CONFIG_IGB_1588_CLOCK and CONFIG_PPS enabled, since the added code was not properly wrapped. CC: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-20igb: Add switch case for supported hardware to igb_ptp_remove.Carolyn Wyborny
PTP initialization is only done on supported parts, so remove needs same checks or it will cause crashes on systems with igb devices that don't support PTP. This patch adds those checks to the exit function. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-20igb: A fix to VF TX rate limitLior Levy
There is a need to configure MMW_SIZE in register RTTBCNRM with a correct value. For 82576 device, the value should be 0x14. Signed-off-by: Lior Levy <lior.levy@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-20igb: Fix incorrect RAR address entries for i210/i211 device.Carolyn Wyborny
i210/i211 device has only 16 RAR address filters like 82575, instead of 32 like i350. This patch removes the entries for i210/i211 in the get_invariants function which was setting them for 32. This ensures that they will get the default value which is the correct one. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-17igb: Disable the BMC-to-OS Watchdog Enable bit for DMAC.Matthew Vick
Under certain scenarios, it's possible that bursty manageability traffic over the BMC-to-OS path may overrun the internal manageability receive buffer causing dropped manageability packets. Clearing this bit prevents this situation by interrupting coalescing to allow manageability traffic through. Signed-off-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2012-05-12igb: Add Support for new i210/i211 devices.Carolyn Wyborny
This patch adds new initialization functions and device support for i210 and i211 devices. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-12igb: Add function and pointers for 82580 low power state settings.Carolyn Wyborny
82580 and later parts did not have low power setting functions. This patch adds the specific functions, pointers and assignments for these low power settings. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-10igb: fix rtnl race in PM resume pathBenjamin Poirier
Since the caller (PM resume code) is not the one holding rtnl, when taking the 'else' branch rtnl may be released at any moment, thereby defeating the whole purpose of this code block. Signed-off-by: Benjamin Poirier <bpoirier@suse.de> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-09igb: output register's information related to RX/TX queue[4-15]Koki Sanagi
Current igb outputs registers related to TX/RX queues(ex. RDT, RDH, TDT, TDH). But it thinks the number of RX/TX queues is 4. But 82576 has 16 RX/TX queues. This patch modifies igb to output the rest of the registers if the device is 82576. Signed-off-by: Koki Sanagi <sanagi.koki@jp.fujitsu.com> Acked-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-21 09:50:00 +0000