summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/ixgbe
AgeCommit message (Collapse)Author
2014-03-19ixgbe: Convert uses of __constant_<foo> to <foo>Joe Perches
The use of __constant_<foo> has been unnecessary for quite awhile now. Make these uses consistent with the rest of the kernel. Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-19ixgbe: add ixgbe_write_pci_cfg_word with ixgbe_removed checkJacob Keller
Inline with the current use for ixgbe_read_pci_cfg_word, create a similar function for writing PCI config, which checks whether the adapter has been removed first, if Live Error Recovery has been enabled. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-14ixgbe: Don't receive packets when the napi budget == 0Eric W. Biederman
Processing any incoming packets with a with a napi budget of 0 is incorrect driver behavior. This matters as netpoll will shortly call drivers with a budget of 0 to avoid receive packet processing happening in hard irq context. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-14net: Replace u64_stats_fetch_begin_bh to u64_stats_fetch_begin_irqEric W. Biederman
Replace the bh safe variant with the hard irq safe variant. We need a hard irq safe variant to deal with netpoll transmitting packets from hard irq context, and we need it in most if not all of the places using the bh safe variant. Except on 32bit uni-processor the code is exactly the same so don't bother with a bh variant, just have a hard irq safe variant that everyone can use. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-12ixgbe: fix some multiline hw_dbg printsJacob Keller
This patch fixes some formatting on multilined print messages, so that the text of the print appears on a single line, which aids in grepping the sourcecode for where the error came from. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-12ixgbe: fixup header for ixgbe_set_rxpba_82598Jacob Keller
The header above this function did not match the function prototype. This patch rewords the comment to specify the correct parameters. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-12ixgbe: add Linux NICS mailing list to contact infoJacob Keller
This patch updates the contact information on the ixgbe driver files so that every file includes the Linux NICS address, as it is still used, but only a few of the files mentioned it. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-12ixgbe: move setting rx_pb_size into get_invariantsJacob Keller
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-12ixgbe: Fix format string in ixgbe_fcoe.cMasanari Iida
cppcheck detected following warning in ixgbe_fcoe.c (warning) %d in format string (no. 1) requires 'int' but the argument type is 'unsigned int'. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Tested-By: Jack Morgan<jack.morgan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-12net: ixgbe calls skb_set_hashTom Herbert
Drivers should call skb_set_hash to set the hash and its type in an skbuff. Signed-off-by: Tom Herbert <therbert@google.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-02ixgbe: implement SIOCGHWTSTAMP ioctlJacob Keller
This patch adds support for the new SIOCGHWTSTAMP ioctl, which enables a process to determine the current timestamp configuration. In order to implement this, store a copy of the timestamp configuration. In addition, we can remove the 'int cmd' parameter as the new set_ts_config function doesn't use it. I also fixed a typo in the function description. -v2 * Only save the settings after validating them Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-02ixgbe: Check config reads for removalMark Rustad
Configuration space reads should also be checked for removal. So add some checks related to config space accesses. v2: * Fixed indent Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-02ixgbe: Fix up some ethtool results when adapter is removedMark Rustad
Some ethtool tests returned apparently good results when the adapter was in a removed state. Fix that by checking for removal. This also fixes two paths that could return uninitialized memory in data[4]. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-02ixgbe: Restore hw_addr in LER recovery pathsMark Rustad
The hw_addr needs to be restored in the pcie recovery path or else the device will be perpetually removed. Also restore the value in the resume path. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-28ixgbe: Add check for FW veto bitDon Skidmore
The driver will now honor the MNG FW veto bit in blocking link resets. This patch will affect x520 and x540 systems. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-28ixgbe: fix bit toggled for 82599 reset fix.Don Skidmore
The current code doesn't toggle the correct bit to reset the data pipeline on Restart_AN assertion. This patch corrects that. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-28ixgbe: collect all 82599 AUTOC code in one functionDon Skidmore
When reading or writing to the AUTOC register on 82599 devices we need to preform various operations that aren't needed for other MAC types. This patch will collect all of that code into one place to minimize MAC checks in common code paths. While doing this I also clean up some cases where we weren't holding the SW/FW semaphore during a read/modify/write of AUTOC. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-28ixgbe: fix to use correct timeout interval for memory read completionDon Skidmore
Currently we were just always polling for a hard coded 80 ms and not respecting the system-wide timeout interval. Since up until now all devices have been tested with this 80ms value we continue to use this value as a hard minimum. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26ixgbe: Add WoL support for a new deviceMark Rustad
Add WoL support for port 0 of a new 82599-based device. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26ixgbe: don't use magic size number to assign ptp_caps.nameJacob Keller
Rather than using a magic size number, just use sizeof since that will work and is more robust to future changes. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26ixgbe: modify behavior on receiving a HW ECC error.Don Skidmore
Currently when we noticed a HW ECC error we would request the use reload the driver to force a reset of the part. This was done due to the mistaken believe that a normal reset would not be sufficient. Well it turns out it would be so now we just schedule a reset upon seeing the ECC. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/bonding/bond_3ad.h drivers/net/bonding/bond_main.c Two minor conflicts in bonding, both of which were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18ixgbe: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Bruce Allan <bruce.w.allan@intel.com> Cc: e1000-devel@lists.sourceforge.net Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17netdevice: add queue selection fallback handler for ndo_select_queueDaniel Borkmann
Add a new argument for ndo_select_queue() callback that passes a fallback handler. This gets invoked through netdev_pick_tx(); fallback handler is currently __netdev_pick_tx() as most drivers invoke this function within their customized implementation in case for skbs that don't need any special handling. This fallback handler can then be replaced on other call-sites with different queue selection methods (e.g. in packet sockets, pktgen etc). This also has the nice side-effect that __netdev_pick_tx() is then only invoked from netdev_pick_tx() and export of that function to modules can be undone. Suggested-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-17ixgbe: bump version numberDon Skidmore
Bump the version number to better match functionality provided with out of tree driver of the same version. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-17ixgbe: add braces around else condition in ixgbe_qv_lock_* callsJacob Keller
This patch adds braces around the ixgbe_qv_lock_* calls which previously only had braces around the if portion. Kernel style guidelines for this require parenthesis around all conditions if they are required around one. In addition the comment while not illegal C syntax makes the code look wrong at a cursory glance. This patch corrects the style and adds braces so that the full if-else block is uniform. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-17ixgbe: set driver_max_VFs should be done before enabling SRIOVethan.zhao
commit 43dc4e01 Limit number of reported VFs to device specific value It doesn't work and always returns -EBUSY because VFs are already enabled. ixgbe_enable_sriov() pci_enable_sriov() sriov_enable() { ... .. iov->ctrl |= PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE; pci_cfg_access_lock(dev); ... ... } pci_sriov_set_totalvfs() { ... ... if (dev->sriov->ctrl & PCI_SRIOV_CTRL_VFE) return -EBUSY; ... } So should set driver_max_VFs with pci_sriov_set_totalvfs() before enable VFs with ixgbe_enable_sriov(). V2: revised for net-next tree. Signed-off-by: Ethan Zhao <ethan.kernel@gmail.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-17ixgbe: define IXGBE_MAX_VFS_DRV_LIMIT macro and cleanup const 63ethan.zhao
Because ixgbe driver limit the max number of VF functions could be enabled to 63, so define one macro IXGBE_MAX_VFS_DRV_LIMIT and cleanup the const 63 in code. v3: revised for net-next tree. Signed-off-by: Ethan Zhao <ethan.kernel@gmail.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-16ixgbe: Fix incorrect logic for fixed fiber eeprom writeDon Skidmore
In this code we wanted to set the bit in IXGBE_SFF_SOFT_RS_SELECT_MASK to the value in rs. So we really needed a logical or rather than an and, this patch makes that change. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-16ixgbe: reinit_locked() should be called with rtnl_lockJohn Fastabend
ixgbe_service_task() is calling ixgbe_reinit_locked() without the rtnl_lock being held. This is because it is being called from a worker thread and not a rtnl netlink or dcbnl path. Add rtnl_{un}lock() semantics. I found this during code review. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15ixgbe: Clear head write-back registers on VF resetAlexander Duyck
The Tx head write-back registers are not cleared during an FLR or VF reset. As a result a configuration that had head write-back enabled can leave the registers set after the driver is unloaded. If the next driver loaded doesn't use the write-back registers this can lead to a bad configuration where head write-back is enabled, but the driver didn't request it. To avoid this situation the PF should be resetting the Tx head write-back registers when the VF requests a reset. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15ixgbe: Force QDE via PFQDE for VFs during resetAlexander Duyck
This change makes it so that the QDE bits are set for a VF before the Rx queues are enabled. As such we avoid head of line blocking in the event that the VF stops cleaning Rx descriptors for whatever reason. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c | 14 ++++++++++++++ drivers/net/ethernet/intel/ixgbe/ixgbe_type.h | 7 ++++--- 2 files changed, 18 insertions(+), 3 deletions(-) Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14ixgbe: Additional adapter removal checksMark Rustad
Additional checks are needed for a detected removal not to cause problems. Some involve simply avoiding a lot of stuff that can't do anything good, and also cases where the phony return value can cause problems. In addition, down the adapter when the removal is sensed. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14ixgbe: Check for adapter removal on register writesMark Rustad
Prevent writes to an adapter that has been detected as removed by a previous failing read. This also fixes some include file ordering confusion that this patch revealed. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14ixgbe: Check register reads for adapter removalMark Rustad
Check all register reads for adapter removal by checking the status register after any register read that returns 0xFFFFFFFF. Since the status register will never return 0xFFFFFFFF unless the adapter is removed, such a value from a status register read confirms the removal. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14ixgbe: Make ethtool register test use accessorsMark Rustad
Make the ethtool register test use the normal register accessor functions. Also eliminate macros used for calling register test functions to make error exits clearer. Use boolean values for boolean returns instead of 0 and 1. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14ixgbe: Use static inlines instead of macrosMark Rustad
Kernel coding standard prefers static inline functions instead of macros, so use them for register accessors. This is to prepare for adding LER, Live Error Recovery, checks to those accessors. Temporarily provide macros for calling the new static inline accessors until all references are changed. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14ixbge: Protect ixgbe_down with __IXGBE_DOWN bitMark Rustad
The ixgbe_down function can now prevent multiple executions by doing test_and_set_bit on __IXGBE_DOWN. This did not work before introduction of the __IXGBE_REMOVING bit, because of overloading of __IXGBE_DOWN. Also add smp_mb__before_clear_bit call before clearing the __IXGBE_DOWN bit. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14ixgbe: Indicate removal state explicitlyMark Rustad
Add a bit, __IXGBE_REMOVING, to indicate that the module is being removed. The __IXGBE_DOWN bit had been overloaded for this purpose, but that leads to trouble. A few places now check both __IXGBE_DOWN and __IXGBE_REMOVE. Notably, setting either bit will prevent service task execution. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2014-01-10net: core: explicitly select a txq before doing l2 forwardingJason Wang
Currently, the tx queue were selected implicitly in ndo_dfwd_start_xmit(). The will cause several issues: - NETIF_F_LLTX were removed for macvlan, so txq lock were done for macvlan instead of lower device which misses the necessary txq synchronization for lower device such as txq stopping or frozen required by dev watchdog or control path. - dev_hard_start_xmit() was called with NULL txq which bypasses the net device watchdog. - dev_hard_start_xmit() does not check txq everywhere which will lead a crash when tso is disabled for lower device. Fix this by explicitly introducing a new param for .ndo_select_queue() for just selecting queues in the case of l2 forwarding offload. netdev_pick_tx() was also extended to accept this parameter and dev_queue_xmit_accel() was used to do l2 forwarding transmission. With this fixes, NETIF_F_LLTX could be preserved for macvlan and there's no need to check txq against NULL in dev_hard_start_xmit(). Also there's no need to keep a dedicated ndo_dfwd_start_xmit() and we can just reuse the code of dev_queue_xmit() to do the transmission. In the future, it was also required for macvtap l2 forwarding support since it provides a necessary synchronization method. Cc: John Fastabend <john.r.fastabend@intel.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: e1000-devel@lists.sourceforge.net Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c net/ipv6/ip6_tunnel.c net/ipv6/ip6_vti.c ipv6 tunnel statistic bug fixes conflicting with consolidation into generic sw per-cpu net stats. qlogic conflict between queue counting bug fix and the addition of multiple MAC address support. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-31net: ixgbe: slight optimization of addr comparedingtianhong
Use possibly more efficient ether_addr_equal to instead of memcmp. Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-17ixgbe: fix for unused variable warning with certain configDon Skidmore
If CONFIG_PCI_IOV isn't defined we get an "unused variable" warining so now wrap the variable declaration like it's usage already was. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-12-17ixgbe: Start temperature sensor attribute index with 1Guenter Roeck
Per hwmon ABI, temperature sensor attribute index starts with 1, not 0. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-12-17ixgbe: Convert to use devm_hwmon_device_register_with_groupsGuenter Roeck
Simplify the code. Attach hwmon sysfs attributes to hwmon device instead of pci device. Avoid race conditions caused by attributes being created after hwmon device registration. Implicitly (through hwmon API) add mandatory 'name' sysfs attribute. Other cleanup: Instead of allocating memory for hwmon attributes, move attributes and all other hwmon related data into struct hwmon_buff and allocate the entire structure using devm_kzalloc. Check return value from calls to igb_add_hwmon_attr() one by one instead of logically combining them all together. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-11-30ixgbe: Make ixgbe_identify_qsfp_module_generic staticMark Rustad
Correct a namespace complaint by making the function static and moving the prototype into the .c file. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-11-30ixgbe: turn NETIF_F_HW_L2FW_DOFFLOAD off by defaultJohn Fastabend
NETIF_F_HW_L2FW_DOFFLOAD allows upper layer net devices such as macvlan to use queues in the hardware to directly submit and receive skbs. This creates a subtle change in the datapath though. One change being the skb may no longer use the root devices qdisc. Because users may not expect this we can't enable the feature by default unless the hardware can offload all the software functionality above it. So for now disable it by default and let users opt in. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-11-30ixgbe: ixgbe_fwd_ring_down needs to be staticJohn Fastabend
When compiling with -Wstrict-prototypes gcc catches a static I missed. ./ixgbe_main.c:4254: warning: no previous prototype for 'ixgbe_fwd_ring_down' Reported-by: Phillip Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-11-14Merge branch 'core-locking-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core locking changes from Ingo Molnar: "The biggest changes: - add lockdep support for seqcount/seqlocks structures, this unearthed both bugs and required extra annotation. - move the various kernel locking primitives to the new kernel/locking/ directory" * 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) block: Use u64_stats_init() to initialize seqcounts locking/lockdep: Mark __lockdep_count_forward_deps() as static lockdep/proc: Fix lock-time avg computation locking/doc: Update references to kernel/mutex.c ipv6: Fix possible ipv6 seqlock deadlock cpuset: Fix potential deadlock w/ set_mems_allowed seqcount: Add lockdep functionality to seqcount/seqlock structures net: Explicitly initialize u64_stats_sync structures for lockdep locking: Move the percpu-rwsem code to kernel/locking/ locking: Move the lglocks code to kernel/locking/ locking: Move the rwsem code to kernel/locking/ locking: Move the rtmutex code to kernel/locking/ locking: Move the semaphore core to kernel/locking/ locking: Move the spinlock code to kernel/locking/ locking: Move the lockdep code to kernel/locking/ locking: Move the mutex code to kernel/locking/ hung_task debugging: Add tracepoint to report the hang x86/locking/kconfig: Update paravirt spinlock Kconfig description lockstat: Report avg wait and hold times lockdep, x86/alternatives: Drop ancient lockdep fixup message ...
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-28 20:20:21 +0000