summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/qlogic/qlge/qlge_main.c
AgeCommit message (Collapse)Author
2014-09-22qlge: Fix compilation warningHarish Patil
Fix the below warning message: qlge_main.c:1754: warning: 'lbq_desc' may be used uninitialized in this function Signed-off-by: Harish Patil <harish.patil@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-25qlge: Fix TSO for non-accelerated vlan trafficVlad Yasevich
This device claims TSO support for vlans. It also allows a user to control vlan acceleration offloading. As such, it is possible to turn off vlan acceleration and configure a vlan which will continue to send TSO traffic. In such situation the packet passed down the the device will contain a vlan header and skb->protocol will be set to ETH_P_8021Q. The device assumes that skb->protocol contains network protocol value and uses that value to set up TSO information. This results in corrupted frames sent on the wire. This patch extracts the protocol value correctly by using a vlan_get_protocol() helper and corrects corrupt TSO frames. CC: Shahed Shaikh <shahed.shaikh@qlogic.com> CC: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> CC: Ron Mercer <ron.mercer@qlogic.com> CC: linux-driver@qlogic.com Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Acked-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-12PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-08-08qlogic: use pci_zalloc_consistentJoe Perches
Remove the now unnecessary memset too. Signed-off-by: Joe Perches <joe@perches.com> Cc: Manish Chopra <manish.chopra@qlogic.com> Cc: Sony Chacko <sony.chacko@qlogic.com> Cc: Rajesh Borundia <rajesh.borundia@qlogic.com> Cc: Shahed Shaikh <shahed.shaikh@qlogic.com> Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Cc: Ron Mercer <ron.mercer@qlogic.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-13net: get rid of SET_ETHTOOL_OPSWilfried Klaebe
net: get rid of SET_ETHTOOL_OPS Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone. This does that. Mostly done via coccinelle script: @@ struct ethtool_ops *ops; struct net_device *dev; @@ - SET_ETHTOOL_OPS(dev, ops); + dev->ethtool_ops = ops; Compile tested only, but I'd seriously wonder if this broke anything. Suggested-by: Dave Miller <davem@davemloft.net> Signed-off-by: Wilfried Klaebe <w-lkml@lebenslange-mailadresse.de> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-27qlge: Convert /n to \nJoe Perches
Use a newline character appropriately. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/marvell/mvneta.c The mvneta.c conflict is a case of overlapping changes, a conversion to devm_ioremap_resource() vs. a conversion to netdev_alloc_pcpu_stats. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-29qlge: remove open-coded skb_cow_head.françois romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Cc: Shahed Shaikh <shahed.shaikh@qlogic.com> Cc: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28qlge: Do not propaged vlan tag offloads to vlansVlad Yasevich
qlge driver turns off NETIF_F_HW_CTAG_FILTER, but forgets to turn off HW_CTAG_TX and HW_CTAG_RX on vlan devices. With the current settings, q-in-q will only generate a single vlan header. Remember to mask off CTAG_TX and CTAG_RX features in vlan_features. CC: Shahed Shaikh <shahed.shaikh@qlogic.com> CC: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> CC: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18qlge: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Shahed Shaikh <shahed.shaikh@qlogic.com> Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Cc: Ron Mercer <ron.mercer@qlogic.com> Cc: linux-driver@qlogic.com Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18qlge: Get rid of an redundant assignmentAlexander Gordeev
Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Shahed Shaikh <shahed.shaikh@qlogic.com> Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Cc: Ron Mercer <ron.mercer@qlogic.com> Cc: linux-driver@qlogic.com Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c net/ipv4/tcp_metrics.c Overlapping changes between the "don't create two tcp metrics objects with the same key" race fix in net and the addition of the destination address in the lookup key in net-next. Minor overlapping changes in bnx2x driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-16drivers/net: delete non-required instances of include <linux/init.h>Paul Gortmaker
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. This covers everything under drivers/net except for wireless, which has been submitted separately. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14qlge: Fix vlan netdev features.Jitendra Kalsaria
vlan gets the same netdev features except vlan filter. Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-05qlge: Allow enable/disable rx/tx vlan acceleration independentlyJitendra Kalsaria
o Fix the driver to allow user to enable/disable rx/tx vlan acceleration independently. For example: ethtool -K ethX rxvlan on/off ethtool -K ethX txvlan on/off Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-22net: qlge: remove unnecessary pci_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-27qlge: Enhance nested VLAN (Q-in-Q) handling.Jitendra Kalsaria
o Adapter doesn’t handle packets with nested VLAN tags in Rx path. User can turn off VLAN tag stripping in the hardware and let the stack handle stripping of VLAN tags in the Rx path. o Users can enable or disable hardware VLAN acceleration using ethtool Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Merge 'net' bug fixes into 'net-next' as we have patches that will build on top of them. This merge commit includes a change from Emil Goode (emilgoode@gmail.com) that fixes a warning that would have been introduced by this merge. Specifically it fixes the pingv6_ops method ipv6_chk_addr() to add a "const" to the "struct net_device *dev" argument and likewise update the dummy_ipv6_chk_addr() declaration. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-25qlge: add missing free_netdev() on error in qlge_probe()Wei Yongjun
Add the missing free_netdev() before return from function qlge_probe() in the error handling case. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-22net/ethernet/qlogic/qlge/qlge_main: Use module_pci_driver to register driverPeter Hüwe
Removing some boilerplate by using module_pci_driver instead of calling register and unregister in the otherwise empty init/exit functions. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-13qlge: fix dma map leak when the last chunk is not allocatedThadeu Lima de Souza Cascardo
qlge allocates chunks from a page that it maps and unmaps that page when the last chunk is released. When the driver is unloaded or the card is removed, all chunks are released and the page is unmapped for the last chunk. However, when the last chunk of a page is not allocated and the device is removed, that page is not unmapped. In fact, its last reference is not put and there's also a page leak. This bug prevents a device from being properly hotplugged. When the DMA API debug option is enabled, the following messages show the pending DMA allocation after we remove the driver. This patch fixes the bug by unmapping and putting the page from the ring if its last chunk has not been allocated. pci 0005:98:00.0: DMA-API: device driver has pending DMA allocations while released from device [count=1] One of leaked entries details: [device address=0x0000000060a80000] [size=65536 bytes] [mapped with DMA_FROM_DEVICE] [mapped as page] ------------[ cut here ]------------ WARNING: at lib/dma-debug.c:746 Modules linked in: qlge(-) rpadlpar_io rpaphp pci_hotplug fuse [last unloaded: qlge] NIP: c0000000003fc3ec LR: c0000000003fc3e8 CTR: c00000000054de60 REGS: c0000003ee9c74e0 TRAP: 0700 Tainted: G O (3.7.2) MSR: 8000000000029032 <SF,EE,ME,IR,DR,RI> CR: 28002424 XER: 00000001 SOFTE: 1 CFAR: c0000000007a39c8 TASK = c0000003ee8d5c90[8406] 'rmmod' THREAD: c0000003ee9c4000 CPU: 31 GPR00: c0000000003fc3e8 c0000003ee9c7760 c000000000c789f8 00000000000000ee GPR04: 0000000000000000 00000000000000ef 0000000000004000 0000000000010000 GPR08: 00000000000000be c000000000b22088 c000000000c4c218 00000000007c0000 GPR12: 0000000028002422 c00000000ff26c80 0000000000000000 000001001b0f1b40 GPR16: 00000000100cb9d8 0000000010093088 c000000000cdf910 0000000000000001 GPR20: 0000000000000000 c000000000dbfc00 0000000000000000 c000000000dbfb80 GPR24: c0000003fafc9d80 0000000000000001 000000000001ff80 c0000003f38f7888 GPR28: c000000000ddfc00 0000000000000400 c000000000bd7790 c000000000ddfb80 NIP [c0000000003fc3ec] .dma_debug_device_change+0x22c/0x2b0 LR [c0000000003fc3e8] .dma_debug_device_change+0x228/0x2b0 Call Trace: [c0000003ee9c7760] [c0000000003fc3e8] .dma_debug_device_change+0x228/0x2b0 (unreliable) [c0000003ee9c7840] [c00000000079a098] .notifier_call_chain+0x78/0xf0 [c0000003ee9c78e0] [c0000000000acc20] .__blocking_notifier_call_chain+0x70/0xb0 [c0000003ee9c7990] [c0000000004a9580] .__device_release_driver+0x100/0x140 [c0000003ee9c7a20] [c0000000004a9708] .driver_detach+0x148/0x150 [c0000003ee9c7ac0] [c0000000004a8144] .bus_remove_driver+0xc4/0x150 [c0000003ee9c7b60] [c0000000004aa58c] .driver_unregister+0x8c/0xe0 [c0000003ee9c7bf0] [c0000000004090b4] .pci_unregister_driver+0x34/0xf0 [c0000003ee9c7ca0] [d000000002231194] .qlge_exit+0x1c/0x34 [qlge] [c0000003ee9c7d20] [c0000000000e36d8] .SyS_delete_module+0x1e8/0x290 [c0000003ee9c7e30] [c0000000000098d4] syscall_exit+0x0/0x94 Instruction dump: 7f26cb78 e818003a e87e81a0 e8f80028 e9180030 796b1f24 78001f24 7d6a5a14 7d2a002a e94b0020 483a7595 60000000 <0fe00000> 2fb80000 40de0048 80120050 ---[ end trace 4294f9abdb01031d ]--- Mapped at: [<d000000002222f54>] .ql_update_lbq+0x384/0x580 [qlge] [<d000000002227bd0>] .ql_clean_inbound_rx_ring+0x300/0xc60 [qlge] [<d0000000022288cc>] .ql_napi_poll_msix+0x39c/0x5a0 [qlge] [<c0000000006b3c50>] .net_rx_action+0x170/0x300 [<c000000000081840>] .__do_softirq+0x170/0x300 Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Acked-by: Jitendra Kalsaria <Jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/emulex/benet/be_main.c drivers/net/ethernet/intel/igb/igb_main.c drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c include/net/scm.h net/batman-adv/routing.c net/ipv4/tcp_input.c The e{uid,gid} --> {uid,gid} credentials fix conflicted with the cleanup in net-next to now pass cred structs around. The be2net driver had a bug fix in 'net' that overlapped with the VLAN interface changes by Patrick McHardy in net-next. An IGB conflict existed because in 'net' the build_skb() support was reverted, and in 'net-next' there was a comment style fix within that code. Several batman-adv conflicts were resolved by making sure that all calls to batadv_is_my_mac() are changed to have a new bat_priv first argument. Eric Dumazet's TS ECR fix in TCP in 'net' conflicted with the F-RTO rewrite in 'net-next', mostly overlapping changes. Thanks to Stephen Rothwell and Antonio Quartulli for help with several of these merge resolutions. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19qlge: Fix receive path to drop error framesSritej Velaga
o Fix the driver to drop error frames in the receive path o Update error counter which was not getting incremented Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: add protocol argument to packet tagging functionsPatrick McHardy
Add a protocol argument to the VLAN packet tagging functions. In case of HW tagging, we need that protocol available in the ndo_start_xmit functions, so it is stored in a new field in the skb. The new field fits into a hole (on 64 bit) and doesn't increase the sks's size. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: prepare for 802.1ad VLAN filtering offloadPatrick McHardy
Change the rx_{add,kill}_vid callbacks to take a protocol argument in preparation of 802.1ad support. The protocol argument used so far is always htons(ETH_P_8021Q). Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: rename NETIF_F_HW_VLAN_* feature flags to NETIF_F_HW_VLAN_CTAG_*Patrick McHardy
Rename the hardware VLAN acceleration features to include "CTAG" to indicate that they only support CTAGs. Follow up patches will introduce 802.1ad server provider tagging (STAGs) and require the distinction for hardware not supporting acclerating both. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-09drivers:net: Remove unnecessary OOM messages after netdev_alloc_skbJoe Perches
Emitting netdev_alloc_skb and netdev_alloc_skb_ip_align OOM messages is unnecessary as there is already a dump_stack after allocation failures. Other trivial changes around these removals: Convert a few comparisons of pointer to 0 to !pointer. Change flow to remove unnecessary label. Remove now unused variable. Hoist assignment from if. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-08drivers: net: Remove remaining alloc/OOM messagesJoe Perches
alloc failures already get standardized OOM messages and a dump_stack. For the affected mallocs around these OOM messages: Converted kmallocs with multiplies to kmalloc_array. Converted a kmalloc/memcpy to kmemdup. Removed now unused stack variables. Removed unnecessary parentheses. Neatened alignment. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Arend van Spriel <arend@broadcom.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-04ethernet: Remove unnecessary alloc/OOM messages, alloc cleanupsJoe Perches
alloc failures already get standardized OOM messages and a dump_stack. Convert kzalloc's with multiplies to kcalloc. Convert kmalloc's with multiplies to kmalloc_array. Fix a few whitespace defects. Convert a constant 6 to ETH_ALEN. Use parentheses around sizeof. Convert vmalloc/memset to vzalloc. Remove now unused size variables. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: Documentation/networking/ip-sysctl.txt drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c Both conflicts were simply overlapping context. A build fix for qlcnic is in here too, simply removing the added devinit annotations which no longer exist. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-11qlge: remove NETIF_F_TSO6 flagAmerigo Wang
It is werid that qlge driver supports NETIF_F_TSO6 but not NETIF_F_IPV6_CSUM. This also causes some kernel warning [1] when VLAN device setups on a qlge interface. I think the qlge hardware doesn't support NETIF_F_IPV6_CSUM, so we have to just remove the NETIF_F_TSO6 flag. After this patch, the TCP/IPv6 traffic becomes normal again, no kernel warnings any more. NOTE: I only tested it on 2.6.32 kernel, even if the upstream kernel could fix this automatically (it is hard to track NETIF* flags), removing it is also safe. 1. https://bugzilla.redhat.com/show_bug.cgi?id=891839 Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Cc: Ron Mercer <ron.mercer@qlogic.com> Cc: linux-driver@qlogic.com Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-08remove init of dev->perm_addr in driversJiri Pirko
perm_addr is initialized correctly in register_netdevice() so to init it in drivers is no longer needed. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-07drivers/net: fix up function prototypes after __dev* removalsGreg Kroah-Hartman
The __dev* removal patches for the network drivers ended up messing up the function prototypes for a bunch of drivers. This patch fixes all of them back up to be properly aligned. Bonus is that this almost removes 100 lines of code, always a nice surprise. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03qlge: remove __dev* attributesBill Pemberton
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Cc: Ron Mercer <ron.mercer@qlogic.com> Cc: linux-driver@qlogic.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-07netdev: make pci_error_handlers constStephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-07-29qlge: Add offload features to vlan interfacesbrenohl@br.ibm.com
This patch fills the net_device vlan_features with the proper hardware features, thus, improving the vlan interface performance. With the patch applied, I can see around 148% improvement on a TCP_STREAM test, from 3.5 Gb/s to 8.7 Gb/s. On TCP_RR, I see a 11% improvement, from 18k to 20. The CPU utilization is almost the same on both cases, from the comparison above. Signed-off-by: Breno Leitao <brenohl@br.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-11qlge: fix endian issueLi RongQing
commit 6d29b1ef introduces a bug, ntohs is __be16_to_cpu, not cpu_to_be16. We always use htons on IP_OFFSET and IP_MF, then compare with network package. Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10qlge: Moving low level frame error to ethtool statistics.Jitendra Kalsaria
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10qlge: Fixed double pci free upon tx_ring->q allocation failure.Jitendra Kalsaria
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10qlge: Cleanup atomic queue threshold check.Jitendra Kalsaria
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10qlge: Fix TX queue stoppage due to full condition.Jitendra Kalsaria
TX queue was being stopped at beginning of send path instead of at the end when last descriptor is used. Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10qlge: remove unnecessary setting of skb->devJon Mason
skb->dev is being unnecessarily set by the driver on packet recieve. eth_type_trans already sets skb->dev to the proper value and it is not referenced anywhere else in the dirver, thus making its setting unnecessary. Signed-off-by: Jon Mason <jdmason@kudzu.us> Cc: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Cc: Ron Mercer <ron.mercer@qlogic.com> Cc: linux-driver@qlogic.com Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05qlge: set maximal number of default RSS queuesYuval Mintz
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Cc: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Cc: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-14net: Fix spelling typo in netMasanari Iida
Correct spelling typo within drivers/net. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-04qlge: Fix memory leak in the process of refillJitendra Kalsaria
Driver was leaking memory when page allocation failures occurs. Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-04qlge: Removing needless print's which are notJitendra Kalsaria
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-04qlge: Fixed invalid reference to ip headerJitendra Kalsaria
we have copied skb into addr(page), skb->data doesn't contain ip header information. Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-08net: make vlan ndo_vlan_rx_[add/kill]_vid return error valueJiri Pirko
Let caller know the result of adding/removing vlan id to/from vlan filter. In some drivers I make those functions to just return 0. But in those where there is able to see if hw setup went correctly, return value is set appropriately. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16net: introduce and use netdev_features_t for device features setsMichał Mirosław
v2: add couple missing conversions in drivers split unexporting netdev_fix_features() implemented %pNF convert sock::sk_route_(no?)caps Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19net: add skb frag size accessorsEric Dumazet
To ease skb->truesize sanitization, its better to be able to localize all references to skb frags size. Define accessors : skb_frag_size() to fetch frag size, and skb_frag_size_{set|add|sub}() to manipulate it. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-25 14:31:30 +0000