summaryrefslogtreecommitdiff
path: root/drivers/net/usb
AgeCommit message (Collapse)Author
2014-03-07r8152: calculate the dropped packets for rxhayeswang
Continue dealing with the remain rx packets, even though the allocation of the skb fail. This could calculate the correct dropped packets. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-07r8152: up the priority of the transmissionhayeswang
move the tx_bottom() from delayed_work to tasklet. It makes the rx and tx balanced. If the device is in runtime suspend when getting the tx packet, wakeup the device before trasmitting. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-07r8152: check tx agg list before spin lockhayeswang
Check tx agg list before spin lock to avoid doing spin lock every times. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-07r8152: replace spin_lock_irqsave and spin_unlock_irqrestorehayeswang
Use spin_lock and spin_unlock in interrupt context. The ndo_start_xmit would not be called in interrupt context, so replace the relative spin_lock_irqsave and spin_unlock_irqrestore with spin_lock_bh and spin_unlock_bh. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-07Revert "USBNET: ax88179_178a: enable tso if usb host supports sg dma"Mathias Nyman
This reverts commit 3804fad45411b48233b48003e33a78f290d227c8. This commit, together with commit 247bf557273dd775505fb9240d2d152f4f20d304 "xhci 1.0: Limit arbitrarily-aligned scatter gather." were origially added to get xHCI 1.0 hosts and usb ethernet ax88179_178a devices working together with scatter gather. xHCI 1.0 hosts pose some requirement on how transfer buffers are aligned, setting this requirement for 1.0 hosts caused USB 3.0 mass storage devices to fail more frequently. USB 3.0 mass storage devices used to work before 3.14-rc1. Theoretically, the TD fragment rules could have caused an occasional disk glitch. Now the devices *will* fail, instead of theoretically failing. >From a user perspective, this looks like a regression; the USB device obviously fails on 3.14-rc1, and may sometimes silently fail on prior kernels. The proper soluition is to implement the TD fragment rules for xHCI 1.0 hosts, but for now, revert this patch until scatter gather can be properly supported. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06r8152: remove rtl8152_get_statshayeswang
The rtl8152_get_stats() returns the point address of the struct net_device_stats. This could be got from struct net_device directly. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-06r8152: replace tp->netdev with netdevhayeswang
Replace some tp->netdev with netdev. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-06r8152: deal with the empty line and spacehayeswang
Add or remove some empty lines. Replace the spaces with the tabs. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-05r8152: disable the ECM modehayeswang
There are known issues for switching the drivers between ECM mode and vendor mode. The interrup transfer may become abnormal. The hardware may have the opportunity to die if you change the configuration without unloading the current driver first, because all the control transfers of the current driver would fail after the command of switching the configuration. Although to use the ecm driver and vendor driver independently is fine, it may have problems to change the driver from one to the other by switching the configuration. Additionally, now the vendor mode driver is more powerful than the ECM driver. Thus, disable the ECM mode driver, and let r8152 to set the configuration to vendor mode and reset the device automatically. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/wireless/ath/ath9k/recv.c drivers/net/wireless/mwifiex/pcie.c net/ipv6/sit.c The SIT driver conflict consists of a bug fix being done by hand in 'net' (missing u64_stats_init()) whilst in 'net-next' a helper was created (netdev_alloc_pcpu_stats()) which takes care of this. The two wireless conflicts were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-02USB AX88179/178A: Support D-Link DUB-1312Gerry Demaret
Add the USB device ID for the D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter to the AX88179/178A driver. Signed-off-by: Gerry Demaret <gerry@tigron.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26AX88179_178A: Add VID:DID for Lenovo OneLinkDock Gigabit LANFreddy Xin
Add VID:DID for Lenovo OneLinkDock Gigabit LAN Signed-off-by: Freddy Xin <freddy@asix.com.tw> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/bonding/bond_3ad.h drivers/net/bonding/bond_main.c Two minor conflicts in bonding, both of which were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18r8152: support get_msglevel and set_msglevelhayeswang
Support get_msglevel and set_msglevel. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18r8152: set disable_hub_initiated_lpmhayeswang
Set disable_hub_initiated_lpm = 1. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18r8152: replace netif_rx with netif_receive_skbhayeswang
Replace netif_rx with netif_receive_skb to avoid disabling irq frequently for increasing the efficiency. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18r8152: disable teredo for RTL8152hayeswang
Disable teredo for RTL8152 by default. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18r8152: support runtime suspendhayeswang
Support runtime suspend for RTL8152 and RTL8153. Move tx_bottom() from tasklet to delayed_work. That avoids to transmit tx packets after calling autosuspend. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18r8152: support WOLhayeswang
Support WOL for RTL8152 and RTL8153. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18r8152: move some functions from probe to openhayeswang
Add up method for rtl_ops and asign relative functions. Move clear_bp() and hw_phy_cfg() from init method to up method of rtl_ops. Call rtl_ops.up() for ndo_open() and rtl_ops.down for ndo_stop(). Replace allocating the memory in probe() with in ndo_open(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18r8152: combine PHY reset with set_speedhayeswang
PHY reset is necessary after some hw settings. However, it would cause the linking down, and so does the set_speed function. Combine the PHY reset with set_speed function. That could reduce the frequency of linking down and accessing the PHY register. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18r8152: clear BMCR_PDOWNhayeswang
Modify the method of enabling the PHY to clear BMCR_PDOWN only. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18r8152: reduce the frequency of spin_lockhayeswang
Replace getting one item from a list with getting the whole list one time. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18r8152: load the default MAC addresshayeswang
Except for RTL_VER_01, replace loading the MAC address from PLA_IDR with from PLA_BACKUP. The default MAC address may be modified by the other OS, so the PLA_IDR may be not the default MAC address. The data in the PLA_BACKUP address of the RTL_VER_01 may be destoryed, so load MAC address from PLA_IDR for RTL_VER_01. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18r8152: replace some types from int to boolhayeswang
Modify the following functions. - r8153_u1u2en - r8153_u2p3en - r8153_power_cut_en Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18r8152: add three functionshayeswang
Replace some codes with the following three functions. - rtl_drop_queued_tx - rxdy_gated_en - r8152_power_cut_en Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18r8152: move some functionshayeswang
Move the following functions which is for the further coding. - rtl_clear_bp - r8153_clear_bp - r8153_teredo_off - r8152b_disable_aldps - r8152b_enable_aldps - r8152b_hw_phy_cfg Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17usbnet: remove generic hard_header_len checkEmil Goode
This patch removes a generic hard_header_len check from the usbnet module that is causing dropped packages under certain circumstances for devices that send rx packets that cross urb boundaries. One example is the AX88772B which occasionally send rx packets that cross urb boundaries where the remaining partial packet is sent with no hardware header. When the buffer with a partial packet is of less number of octets than the value of hard_header_len the buffer is discarded by the usbnet module. With AX88772B this can be reproduced by using ping with a packet size between 1965-1976. The bug has been reported here: https://bugzilla.kernel.org/show_bug.cgi?id=29082 This patch introduces the following changes: - Removes the generic hard_header_len check in the rx_complete function in the usbnet module. - Introduces a ETH_HLEN check for skbs that are not cloned from within a rx_fixup callback. - For safety a hard_header_len check is added to each rx_fixup callback function that could be affected by this change. These extra checks could possibly be removed by someone who has the hardware to test. - Removes a call to dev_kfree_skb_any() and instead utilizes the dev->done list to queue skbs for cleanup. The changes place full responsibility on the rx_fixup callback functions that clone skbs to only pass valid skbs to the usbnet_skb_return function. Signed-off-by: Emil Goode <emilgoode@gmail.com> Reported-by: Igor Gnatenko <i.gnatenko.brain@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-14net: asix: add missing flag to struct driver_infoEmil Goode
The struct driver_info ax88178_info is assigned the function asix_rx_fixup_common as it's rx_fixup callback. This means that FLAG_MULTI_PACKET must be set as this function is cloning the data and calling usbnet_skb_return. Not setting this flag leads to usbnet_skb_return beeing called a second time from within the rx_process function in the usbnet module. Signed-off-by: Emil Goode <emilgoode@gmail.com> Reported-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13USB2NET: Fix Default to 'y' for SR9800 Device Driver, setting to 'n'Liu Junliang
Signed-off-by: Liu Junliang <liujunliang_ljl@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13USB2NET: SR9800: use %zu for size_tJingoo Han
Use %zu for size_t in order to avoid the following build warning in printks. drivers/net/usb/sr9800.c: In function 'sr9800_bind' drivers/net/usb/sr9800.c:826:2: warning: format '%ld' expects argument of type 'long int' but argument 5 has type 'size_t' [-Wformat] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13net: qmi_wwan: add support for Cinterion PXS8 and PHS8Aleksander Morgado
When the PXS8 and PHS8 devices show up with PID 0x0053 they will expose both a QMI port and a WWAN interface. CC: Hans-Christoph Schemmel <hans-christoph.schemmel@gemalto.com> CC: Christian Schmiedl <christian.schmiedl@gemalto.com> CC: Nicolaus Colberg <nicolaus.colberg@gemalto.com> CC: David McCullough <david.mccullough@accelecon.com> Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-10USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800 Device Driver SupportLiu Junliang
Signed-off-by: Liu Junliang <liujunliang_ljl@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-09net: qmi_wwan: add ZTE MF667Raymond Wanyoike
The driver description files give these descriptions to the vendor specific ports on this modem: VID_19D2&PID_1270&MI_00: "ZTE MF667 Diagnostics Port" VID_19D2&PID_1270&MI_01: "ZTE MF667 AT Port" VID_19D2&PID_1270&MI_02: "ZTE MF667 ATExt2 Port" VID_19D2&PID_1270&MI_03: "ZTE MF667 ATExt Port" VID_19D2&PID_1270&MI_04: "ZTE MF667 USB Modem" VID_19D2&PID_1270&MI_05: "ZTE MF667 Network Adapter" Signed-off-by: Raymond Wanyoike <raymond.wanyoike@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-06hso: remove some dead codeDan Carpenter
It seems like this function was intended to have special handling for urb statuses of -ENOENT and -ECONNRESET. But now it just prints some debugging and returns at the start of the function. I have removed the dead code, it's still in the git history if anyone wants to revive it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-06r8152: fix the submission of the interrupt transferhayeswang
The submission of the interrupt transfer should be done after setting the bit of WORK_ENABLE, otherwise the callback function would have the opportunity to be returned directly. Clear the bit of WORK_ENABLE before killing the interrupt transfer. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-04net: qmi_wwan: add Netgear Aircard 340UBjørn Mork
This device was mentioned in an OpenWRT forum. Seems to have a "standard" Sierra Wireless ifnumber to function layout: 0: qcdm 2: nmea 3: modem 8: qmi 9: storage Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c net/ipv4/tcp_metrics.c Overlapping changes between the "don't create two tcp metrics objects with the same key" race fix in net and the addition of the destination address in the lookup key in net-next. Minor overlapping changes in bnx2x driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-16drivers/net: delete non-required instances of include <linux/init.h>Paul Gortmaker
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. This covers everything under drivers/net except for wireless, which has been submitted separately. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14r8152: ecm and vendor modes coexisthayeswang
Remove the limitation that the ecm and r8152 drivers couldn't coexist. - Remove the devices from the blacklist of relative drivers. - Remove usb_driver_set_configuration() from r8152 driver. - Modify the id_table of the r8152 driver for the vendor mode only. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14r8152: fix the warnings and a error from checkpatch.plhayeswang
Fix the following warnings and error: - WARNING: usb_free_urb(NULL) is safe this check is probably not required - WARNING: kfree(NULL) is safe this check is probably not required - ERROR: do not use C99 // comments Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14r8152: change the descriptorhayeswang
The r8152 could support RTL8153. Update the relative descriptor. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14dm9601: add USB IDs for new dm96xx variantsPeter Korsgaard
A number of new dm96xx variants now exist. Reported-by: Joseph Chang <joseph_chang@davicom.com.tw> Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2014-01-13net: usbnet: fix SG initialisationBjørn Mork
Commit 60e453a940ac ("USBNET: fix handling padding packet") added an extra SG entry in case padding is necessary, but failed to update the initialisation of the list. This can cause list traversal to fall off the end of the list, resulting in an oops. Fixes: 60e453a940ac ("USBNET: fix handling padding packet") Reported-by: Thomas Kear <thomas@kear.co.nz> Cc: Ming Lei <ming.lei@canonical.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Tested-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-07r8152: correct some messagesHayes Wang
- Replace pr_warn_ratelimited() with net_ratelimit() and netdev_warn(). - Adjust the algnment of some messages. - Remove the peroid. - Fix some messages don't have terminating newline. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c net/ipv6/ip6_tunnel.c net/ipv6/ip6_vti.c ipv6 tunnel statistic bug fixes conflicting with consolidation into generic sw per-cpu net stats. qlogic conflict between queue counting bug fix and the addition of multiple MAC address support. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06hso: fix handling of modem port SERIAL_STATE notificationsDan Williams
The existing serial state notification handling expected older Option devices, having a hardcoded assumption that the Modem port was always USB interface #2. That isn't true for devices from the past few years. hso_serial_state_notification is a local cache of a USB Communications Interface Class SERIAL_STATE notification from the device, and the USB CDC specification (section 6.3, table 67 "Class-Specific Notifications") defines wIndex as the USB interface the event applies to. For hso devices this will always be the Modem port, as the Modem port is the only port which is set up to receive them by the driver. So instead of always expecting USB interface #2, instead validate the notification with the actual USB interface number of the Modem port. Signed-off-by: Dan Williams <dcbw@redhat.com> Tested-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06r8152: replace the return value of rtl_ops_inithayeswang
Replace the boolean value with the error code for the return value of the rtl_ops_init(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06r8152: move the actions of saving the information of the devicehayeswang
Some information of the device may be used in other functions. Move the relative code to make sure it would be initialzed correctly before using it. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-29 08:26:58 +0000