summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath10k
AgeCommit message (Collapse)Author
2014-03-28ath10k: deinit copy engine before resettingMichal Kazior
Since copy engine allocation has been revised the ath10k_pci_ce_deinit() now simply zeroes copy engine registers. It's probably a good idea to do that before reseting for a more graceful device reset. Before ath10k_pci_ce_deinit() freed copy engine ringbuffer memory so it was required to call it after resetting. Otherwise it was possible for device to access unmapped/freed copy engine ringbuffer memory. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-03-28ath10k: split ce initialization and allocationMichal Kazior
Definitions by which copy engine structure are allocated do not change so it doesn't make much sense to re-create those structures each time device is booted (e.g. due to firmware recovery). This should decrease chance of memory allocation failures. While at it remove per_transfer_context pointer indirection. The array has been trailing the copy engine ringbuffer structure anyway. This also saves pointer size worth of bytes for each copy engine ringbuffer. Reported-By: Avery Pennarun <apenwarr@gmail.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-03-28ath10k: convert pci_alloc_consistent() to dma_alloc_coherent()Michal Kazior
This allows to use GFP_KERNEL allocation. This should decrease chance of allocation failure, e.g. during firmware recovery. Reported-By: Avery Pennarun <apenwarr@gmail.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-03-28ath10k: print chip id during bootKalle Valo
This makes it easier to debug what kind of board is used. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-03-28ath10k: add module parameter values to the pci info printKalle Valo
Hopefully this makes it easier to debug problems in the future. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-03-28ath10k: improve pci debug messagesKalle Valo
To make it easier to debug pci problems improve the log messages in pci.c. Also change some debug messages to warning messages to more easily catch problems. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-03-28ath10k: delete ar_pci->fw_indicator_addressKalle Valo
It always contains the same constant, no need to have a separate variable for it. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-03-28ath10k: advertise only firmware API 2 filesKalle Valo
We do not really support older firmware API 1 anymore, so better remove MODULE_FIRMWARE() declarations for them and only list for API 2 files. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-03-28ath10k: fix name of target_ps module parameterKalle Valo
The parameter name was ath10k_target_ps, but actually it should be just target_ps. Module parameter names should not use the ath10k_ prefix. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-03-28ath10k: add module parameter to disable cold resetKalle Valo
As cold reset is not reliable with CUS223 boards, make it possible to disable cold reset entirely and only use warm reset. This makes it also easier to debug warm reset problems. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-03-28ath10k: cleanup ath10k_pci_wait_for_target_init()Kalle Valo
ath10k_pci_wait_for_target_init() did really follow the style used elsewhere in ath10k. Use ath10k_pci_read/write() wrappers, simplify the while loop and improve warning messages. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-03-28ath10k: add otp and firmware boot error messagesBen Greear
If OTP or firmware fails to load properly, print out some extra info in the kernel logs. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-03-28ath10k: better firmware loading error messagesBen Greear
Let user know the name of the board file if it is not found, and make it easier to determine the firmware api being used. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-03-28ath10k: unify warning messages in mac.cKalle Valo
Currently there are different styles used for warning messages, unify them to look similar. The style basically is: 1) start with a verb (if possible) 2) lower case letters 3) use plain english as much as possible Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-03-25ath10k: fix rssi and rate reportingJanusz Dziedzic
RSSI and RATES fields are valid only when START_VALID bit is set. So, in current implementation we have to remember/caclulate them when START_VALID and report the same when only END_VALID is set. Currently during heavy traffic we could have: - 10 packets with START_VALID - correct RSSI and RATES - 10 packets with END_VALID - 10 packets with START_VALID - correct RSSI and RATES - 10 packets with END_VALID ... Next using monitor interface we will see: - 10 packets with correct rssi/rates - 10 packets with rssi=-95/rate=6Mbps Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-03-25ath10k: introduce rx_status htt templateJanusz Dziedzic
Introduce rx_status htt template instead of stack version, as a preparation for fix rssi and rates reporting. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-03-25ath10k: finally kill htt_rx_infoJanusz Dziedzic
Struct htt_rx_info is not needed anymore while we will use ieee80211_rx_status structure as a template. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-03-25ath10k: improve way we play with attention flagsJanusz Dziedzic
Remove almost the same code, and do only once __le32_to_cpu() conversion. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-03-25ath10k: return error when ath10k_htt_rx_amsdu_pop() failJanusz Dziedzic
Return error when rx_amsdu_pop() will fail. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-03-25ath10k: kill not needed fields from htt_rx_infoJanusz Dziedzic
Kill rates, tsf, fcs_err, mic_err, amsdu_more, encrypt_type, signal from htt_rx_info and setup this directly in ieee80211_rx_status. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-03-25ath10k: setup rx channel per ppduJanusz Dziedzic
Setup band and frequency in ieee80211_rx_status only once - for ppdu. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-03-25ath10k: introduce ieee80211_rx_status to htt_rx_infoJanusz Dziedzic
Will be used as a template, and final storage for rx_status. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-03-25ath10k: rename process_rx_rates to ath10k_htt_rx_h_ratesJanusz Dziedzic
No functional changes. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-03-25ath10k: move rx related functions to htt_rx.cJanusz Dziedzic
No functional changes. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-03-24ath10k: fix the peer mac address in getting statsChun-Yeow Yeoh
Using the macro to convert the MAC address from WMI word format to char array has lead to the wrong peer mac address printed out while retrieving the peer stats from FW. Fix this. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Reviewed-By: Michał Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-03-24ath10k: update regulatory domain settings for 10.x firmwareMarek Puzyniak
Regulatory domain settings for firmware 10.x has more options than main firmware, so handle regulatory domain setup separately for both supported firmwares. Fill in additional dfs domain parameter according to current regulatory. This patch does not solve any known bug. Not handled parameter for firmware 10.x was found during code review. Signed-off-by: Marek Puzyniak <marek.puzyniak@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-03-24ath10k: add soft/hard firmware crash option to simulate_fw_crashMarek Puzyniak
Command WMI_FORCE_FW_HANG_CMDID is not supported in firmware 10.1. In order to have firmware crash simulation functionality also in firmware 10.1 driver can force firmware crash by performing not allowed operation. Driver can deliberately crash firmware when setting vdev param for vdev id out of range. This patch introduces two keywords to simulate_fw_crash: 'soft' which will cause firmware crash that is recoverable by warm firmware reset but supported only in main firmware. 'hard' which will cause firmware crash recoverable by cold firmware reset, this option works for both firmwares. Commands to trigger firmware soft/hard crash: echo 'soft' > /sys/kernel/debug/ieee80211/phyX/ath10k/simulate_fw_crash echo 'hard' > /sys/kernel/debug/ieee80211/phyX/ath10k/simulate_fw_crash kvalo: remove '\n' before checking the command and simplify how buf is null terminated Signed-off-by: Marek Puzyniak <marek.puzyniak@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-03-21ath10k: Fill per-ppdu info in rx_info only onceJanusz Dziedzic
Don't fill this for each msdu, while this is the same. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-03-21ath10k: add ath10k_htt_rx_amsdu_allowed functionJanusz Dziedzic
Introduce ath10k_htt_rx_amsdu_allowed() function, that group code for checking if skip amsdu packets. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-03-21ath10k: check otp.bin resultKalle Valo
When we execute otp.bin in the target check that the result it returns doesn't contain an error. This is to make sure that we don't accidentally use invalid calibration data. While at it, remove the useless label in the function and add few debug messages. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-03-21ath10k: separate result parameter in ath10k_bmi_execute()Kalle Valo
It's just cleaner to have separate argument for the parameter and result. Also fix returned error value if response length is invalid. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-03-13ath10k: add recalc RTS/CTS protection methodMarek Kwaczynski
Add recalculation of RTS/CTS protection when one or more legacy stations are connected to ath10k. In this case enable RTS/CTS protection and set sw retry profile are needed in the FW. Without this change legacy station is starved and has very low throughput. Signed-off-by: Marek Kwaczynski <marek.kwaczynski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-03-11ath10k: allow the supported rate change by reassociate peerChun-Yeow Yeoh
IBSS mode requires the changing of supported rate. Do this by reassociate the peer. The investigation shows that if move from legacy to HT, the rate control won't work after changing the supported rate. But once changing the supported rate to HT, user can assign the TxRate in HT mode. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-03-07ath10k: do not overwrite max_antenna_gainMarek Puzyniak
Seems like we have an old bug, where we incidently overwrites the max_antenna_gain we pass to firmware, with zero value. End of all we are artifically reducing the output power. This patch removes the excessive assignment on max_antenna_gain, which is being provided by regulatory domain, and consequently improves the tx power. Signed-off-by: Marek Puzyniak <marek.puzyniak@tieto.com> Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-03-07ath10k: support msdu chainingBen Greear
Consolidate the list of msdu skbs into the msdu-head skb, delete the rest of the skbs, pass the msdu-head skb on up the stack as normal. Tested with high-speed TCP and UDP traffic on modified firmware that supports raw-rx. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-03-03ath10k: add vdev-id, return code to error codesBen Greear
When using multiple vdevs (stations, aps, etc), it is nice to be able to associate log messages with specific interfaces. So, add vdev-id to most logging messages. Add return code as well, where it was missing. kvalo: unify some of the messages to follow the same style Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-02-28ath10k: minimize coherent dma accessesMichal Kazior
It doesn't make much sense to calculate the ring size fill count because it already is memoized in a separate variable. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-02-28ath10k: remove pci completion listMichal Kazior
One of the premises was to guarantee serialized completion handling for upper layers (HTC/WMI/HTT). Since quite some time now it is no longer necessary. The other premise was to batch up tx/rx completions to take advantage of hot caches. However frame tx/rx completion indications come in on a single pipe already so they are already batched up. More meaningful batching is done in HTT itself. This means PCI completion is no longer necessary to keep around. It just wastes memory, cycles and SLOC. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-02-28ath10k: reduce htt tx/rx spinlock overheadMichal Kazior
It is inefficient to grab irqsave spinlocks for skb lists for each queue/dequeue action. Using rx_ring.lock and tx_lock allows to use less heavy bh spinlock functions and moving locking upwards allows to toggle spinlocks less often. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-02-28ath10k: batch htt tx/rx completionsMichal Kazior
HTT Rx endpoint processes both frame rx indications and frame tx completion indications. Those completions typically come in batches and may be mixed so it makes sense to defer processing hoping to get a bunch of them and take advantage of hot caches. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-02-28ath10k: bypass htc for htt tx pathMichal Kazior
Going through full htc tx path for htt tx is a waste of resources. By skipping it it's possible to easily submit scatter-gather to the pci hif for reduced host cpu load and improved performance. The new approach uses dma pool to store the following metadata for each tx request: * msdu fragment list * htc header * htt tx command The htt tx command contains a msdu prefetch. Instead of copying it original mapped msdu address is used to submit a second scatter-gather item to hif to make a complete htt tx command. The htt tx command itself hands over dma mapped pointers to msdus and completion of the command itself doesn't mean the frame has been sent and can be unmapped/freed. This is why htc tx completion is skipped for htt tx as all tx related resources are freed upon htt tx completion indication event (which also implicitly means htt tx command itself was completed). Since now each htt tx request effectively consists of 2 copy engine items CE_HTT_H2T_MSG_SRC_NENTRIES is updated to allow maximum of TARGET_10X_NUM_MSDU_DESC msdus being queued. This keeps the tx path resource management simple. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-02-28ath10k: replace send_head() with tx_sg()Michal Kazior
PCI is capable of handling scatter-gather lists. This can be used to avoid copying memory. Change the name of the callback while at to reflect its purpose. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-02-28ath10k: remove is_aborted from skb_cbMichal Kazior
The flag wasn't used anymore. No need to keep it. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-02-28ath10k: remove DMA mapping wrappersMichal Kazior
There's no real benefit from using them. DMA-API already provides debugging. Some skbuffs are already mapped directly with DMA-API since wrapper arguments were insufficient and extending them would be pointless. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-02-27ath10k: skip management frames in HTT pathJanusz Dziedzic
After we pass frames with INV_PEER to upper layer in commit 716ae53c56cf ("ath10k: pass frames with invalid peer status to upper layer") we could pass some management frames (in case INVALID_PEER and MGMT_CTRL) twice to upper layer, once via WMI and once via HTT. Next we could handle assoc request twice. This patch remove such regression. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-02-27ath10k: bitrate_mask add force_sgi supportJanusz Dziedzic
Add force SGI support. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-02-27ath10k: enable spectrum management supportJanusz Dziedzic
Indicate spectrum management support in hardware flags, while we already handle power set (IEEE80211_CONF_CHANGE_POWER) in the ath10k driver. This enable 802.11h support for station mode. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-02-27ath10k: set the mactime of ieee80211_rx_statusChun-Yeow Yeoh
Retrieve the mactime of ieee80211_rx_status based on received data frame. The value is obtained from the htt_rx_indication_ppdu structure and only available in 32-bit. kvalo: white space fixes Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-02-26ath10k: fix sta_rc_update for non-ap iftypeMichal Kazior
The arsta structure wasn't initialized for non-ap interfaces. This should fix related warnings/crashes. Reported-By: Ben Greear <greearb@candelatech.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-02-26ath10k: fix 4addr rxMichal Kazior
The nwifi header is padded to 4 bytes. This wasn't a problem until one tried to (at least) rx 4addr frames. This finally allows managed iface to be used in a bridge. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-21 22:24:08 +0000