summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath5k
AgeCommit message (Collapse)Author
2011-07-13ath5k: do not call ieee80211_stop_queue for queues not managed by mac80211Felix Fietkau
Instead of using ieee80211_stop_queue, check the configured tx queue limit before calling ieee80211_get_buffered_bc. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13ath5k: disable 32KHz sleep clock operation by defaultFelix Fietkau
While 32 KHz sleep clock might provide some power saving benefits, it is also a major source of stability issues, on OpenWrt it produced some reproducible data bus errors on register accesses on several different MIPS platforms. All the Atheros drivers that I can find do not enable this feature, so it makes sense to leave it disabled in ath5k as well. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13ath5k: fix reference clock usec duration setting restoreFelix Fietkau
enabling the sleep clock alters the AR5K_USEC_32 field, but disabling it didn't restore it. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13ath5k: delay full calibration after resetFelix Fietkau
During scans the full calibration usually does not make much sense, PAPD probing and IQ calibration should be deferred until there is enough time to complete them. Adding 100 ms to the initial full calibration delay should be enough to do this. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13ath5k: initialize common->clockrateFelix Fietkau
Fixes a division by zero when setting distance before activating the device for the first time. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13ath5k: fix reference clock frequency for spur mitigation on AR2413Felix Fietkau
AR2413 uses the same reference clock as AR5413 Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13ath5k: apply the synth voltage tweak only on AR5112 rev 2Felix Fietkau
Might fix some stability issues on newer chips Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13ath5k: add missing checks for rfgain probeFelix Fietkau
rfgain probe is only necessary for OFDM operation on AR5111 and AR5112. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11ath5k: Add missing breaks in switch/caseJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-11ath5k: Add missing breaks in switch/caseJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11ath5k: fix typos, bad comment formatting and GHz in place of MHzPavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11ath5k: validate mode in ath5k_ani_init() before trying to set itPavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 Conflicts: drivers/net/wireless/ath/ath5k/sysfs.c net/bluetooth/l2cap_core.c net/mac80211/wpa.c
2011-07-11Merge branch 'master' into for-nextJiri Kosina
Sync with Linus' tree to be able to apply pending patches that are based on newer code already present upstream.
2011-07-08ath5k: read sc->imask with sc->irqlock heldPavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> sc->imask may change if ath5k_set_current_imask() races against itself. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08ath5k: use kstrtoint() to parse numbers coming from sysfsPavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08ath5k: fix formatting errors found by checkpatch.plPavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08ath5k: fix misplaced or extraneous braces found by checkpatch.plPavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08ath5k: use parentheses around macro definitionsPavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08ath5k: don't use volatile, it's not neededPavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> The reg variable is only used by __raw_writel() and __raw_readl(), which should guarantee memory access in the right order. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08ath5k: use more readable way to clear MAC addressPavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08ath5k: use DEFINE_PCI_DEVICE_TABLE in led.c, mark users with __devinitPavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08ath5k: use KERN_WARNING in ATH5K_PRINTFPavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08ath5k: remove unneeded parentheses after returnPavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08ath5k: replace spaces with tabs as suggested by checkpatch.plPavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08ath5k: remove PRIV_ENTRY and PRIV_ASSIGN macros, they obfuscate the codePavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2011-07-05ath5k: fix incorrect use of drvdata in PCI suspend/resume codePavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Cc: <stable@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05ath5k: fix incorrect use of drvdata in sysfs codePavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Cc: <stable@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29ath5k: fix memory leak when fewer than N_PD_CURVES are in useEugene A. Shatokhin
We would free the proper number of curves, but in the wrong slots, due to a missing level of indirection through the pdgain_idx table. It's simpler just to try to free all four slots, so do that. Cc: stable@kernel.org Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-24Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/rtlwifi/pci.c include/linux/netlink.h
2011-06-21net: remove mm.h inclusion from netdevice.hAlexey Dobriyan
Remove linux/mm.h inclusion from netdevice.h -- it's unused (I've checked manually). To prevent mm.h inclusion via other channels also extract "enum dma_data_direction" definition into separate header. This tiny piece is what gluing netdevice.h with mm.h via "netdevice.h => dmaengine.h => dma-mapping.h => scatterlist.h => mm.h". Removal of mm.h from scatterlist.h was tried and was found not feasible on most archs, so the link was cutoff earlier. Hope people are OK with tiny include file. Note, that mm_types.h is still dragged in, but it is a separate story. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-20ath5k: add missing ieee80211_free_hw() on unload in AHB codePavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-20ath5k: free sc->ah in ath5k_deinit_softcJohn W. Linville
Nothing else is freeing it, and this mirrors the error handling path already in ath5k_init_softc. https://bugzilla.kernel.org/show_bug.cgi?id=37592 Signed-off-by: John W. Linville <linville@tuxdriver.com> Reported-by: Tsyvarev Andrey <tsyvarev@ispras.ru>
2011-06-20treewide: remove duplicate includesVitaliy Ivanov
Many stupid corrections of duplicated includes based on the output of scripts/checkincludes.pl. Signed-off-by: Vitaliy Ivanov <vitalivanov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-17ath5k: annotate reg in ath5k_hw_nic_reset() as __iomemPavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-17ath5k: minor cleanupPavel Roskin
Move an extern variable declaration to a header file. Prefix all functions with "ath5k_". Make ath5k_intr() static. Remove unneeded forward declarations. Remove pointless "extern" in a function declaration. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-03ath5k: Disable fast channel switching by defaultNick Kossifidis
Disable fast channel change by default on AR2413/AR5413 due to some bug reports (it still works for me but it's better to be safe). Add a module parameter "fastchanswitch" in case anyone wants to enable it and play with it. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/iwlwifi/iwl-agn-tx.c net/mac80211/sta_info.h
2011-05-11ath5k: Fix lockup due to un-init spinlock.Ben Greear
This was introduced in 2.6.39-rc1 it seems. Signed-off-by: Ben Greear <greearb@candelatech.com> Tested-by: Sedat Dilek <sedat.dilek@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-05Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/libertas/if_cs.c drivers/net/wireless/rtlwifi/pci.c net/bluetooth/l2cap_sock.c
2011-04-29ath5k: fix uninitialized var warning for txf2txsJohn W. Linville
CC [M] drivers/net/wireless/ath/ath5k/reset.o drivers/net/wireless/ath/ath5k/reset.c: In function ‘ath5k_hw_init_core_clock’: drivers/net/wireless/ath/ath5k/reset.c:100:51: warning: ‘txf2txs’ may be used uninitialized in this function Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/iwlwifi/iwl-core.c drivers/net/wireless/rt2x00/rt2x00queue.c drivers/net/wireless/rt2x00/rt2x00queue.h
2011-04-14ath5k: disable 5 GHz support for the dualband PHY chip on dual-radio AR5312Felix Fietkau
There are two variants of AR5312 dual-band devices, one single-radio and the other one dual-radio. On the dual-radio board, the first MAC only supports 5 GHz, even though it has a dual-band PHY. The 2.4 GHz part of this phy is used in pass-through mode, connecting the second MAC with the second PHY. Disable 2.4 GHz for the first MAC on an AR5312, but only if the board configuration indicates a dual-radio device. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-14ath5k: fix the EEPROM check for hw AES crypto supportFelix Fietkau
EEPROM version 5.0 adds a new field for disabling AES support, having an older version means that AES is present. This patch fixes hw AES crypto support on AR5312 boards, which have an older EEPROM version. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-14ath5k: add a new bus op for reading the mac addressFelix Fietkau
On AHB, the calibration data usually does not contain a valid MAC address, the correct MAC address is stored in the board config. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-14ath: unshare struct ath_bus_ops between ath5k and ath9kFelix Fietkau
This struct is not used in any common code, and moving it out of the ath header makes it easier to add more driver specific ops. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-14ath5k: disable 5 GHz support if a 2.4 GHz radio is detectedFelix Fietkau
On a dual-radio dual-band AR5312 device, the calibration data is shared between the 5 GHz and the 2.4 GHz radio/MAC. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath5k: improve comments for optimized tx descriptor setupJohn W. Linville
Comment the use of local variables to reduce the number of load/store operations on uncached memory, in hopes of not losing this optimization accidentally in the future. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-12ath5k: reduce interrupt load caused by rx/tx interruptsFelix Fietkau
While the rx/tx tasklet is pending, new unnecessary interrupts may arrive. Decrease the load by temporarily disabling the interrupts until the tasklet has completed. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-31 10:53:30 +0000