summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/b43/main.c
AgeCommit message (Collapse)Author
2014-11-19mac80211: allow drivers to support NL80211_SCAN_FLAG_RANDOM_ADDRJohannes Berg
Allow drivers to support NL80211_SCAN_FLAG_RANDOM_ADDR with software based scanning and generate a random MAC address for them for every scan request with the flag. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-09-15b43: add support for setting the beacon listen intervalHauke Mehrtens
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15b43: add missing rateHauke Mehrtens
The OFDM reate 9MB was not set here Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15b43: tell ucode the phy type and versionHauke Mehrtens
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15b43: tell the ucode the mac capabilitiesHauke Mehrtens
This is based on code form brcmsmac. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15b43: Implement PHY PLL resetRafał Miłecki
We should reset PLL after changing MAC frequency. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11b43: HT-PHY: Set MAC frequency to correct valuesRafał Miłecki
I misunderstood original Broadcom comment and used wrong values. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-25b43: flush some writes on Broadcom MIPS SoCsRafał Miłecki
Access to PHY and radio registers is indirect on Broadcom hardware and it seems that addressing on some MIPS SoCs may require flushing. So far this problem was noticed on 0x4716 SoC only (marketing names: BCM4717, BCM4718). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-29b43: add support for BCM43131 chipset with N-PHY rev 17Rafał Miłecki
It contains radio 0x2057 rev 14 just like a BCM43217, so it doesn't require any magic. The main difference is that BCM4313 is 1x1:1. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-23b43: enable 5 GHz support for N-PHY devicesRafał Miłecki
This has been tested on 14e4:4328 (BCM4321), 14e4:432b (BCM4322), 14e4:4353 (BCM43224) and 14e4:4359 (BCM43228) which is an almost complete list of 5 GHz capable device (only BCM43222 is missing). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-23b43: register limited amount of 5G channels for BCM43228Rafał Miłecki
We don't have all needed channel tables due to RE process for this device. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-22b43: extract one more radio parameter: versionRafał Miłecki
Some radios may share the same ID and revision but differ by a version. E.g. radio in BCM5357B0 is version 1 and requires specific handling. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-22b43: enable radio 0x2057 rev 14 support (AKA BCM43217)Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-18b43: use one shared function for setting MAC frequencyRafał Miłecki
By the way add few chipsets that were tracked with "wl" dumps. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15b43: don't warn about no 5 GHz support on 2.4 GHz devicesRafał Miłecki
This could be a bit confusing to see warning about lacking support for 5 GHz band if your device supports 2.4 GHz only. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15b43: enable radio 0x2057 rev 9 (AKA BCM43228) supportRafał Miłecki
Support for N-PHY rev 8 with 0x2057 rev 5 is almost ready, but we still need to figure out how to handle rev 9 first. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15b43; N-PHY: write most of the missing code for revs 7+Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15b43: always print info about radio (manuf, id, revision)Rafał Miłecki
Type of radio has a major meaning for the driver. There is quite some code that does initialization/calibration depending on the radio rev. Knowing radio params is quite important to provide help to users, so print it even with debugging disabled. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-10Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-07-07b43: fix reading info about radio for new devices (cores 40 & 42)Rafał Miłecki
This changes b43-phy0: Found Radio: Manuf 0x17F, Version 0x7769, Revision 4 to the b43-phy0: Found Radio: Manuf 0x17F, Version 0x2069, Revision 4 which matches what closed source driver reports: $ wl revinfo radiorev 0x42069000 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-01b43: add more bcma coresRafał Miłecki
This adds some cores with 0x2057 radio which will be supported soon as well as core 40 that I missed in the earlier firmware patch. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-01b43: treat LCNXN-PHY as extra N-PHY devicesRafał Miłecki
LCNXN is simply a continuation of N, e.g. code handling LCNXN revs 0 and 1 is mostly the same as for N-PHY revs 7+. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25b43: update list and code making a selection of firmware filesRafał Miłecki
Clean ucode selection, fix choice of firmware for LCN, drop some goto-s, add new devices. Tested on 14e4:4312, 14e4:4315, 14e4:4328, 14e4:432b, 14e4:4353. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-20b43: add config for (en|dis)abling G-PHY supportRafał Miłecki
This allows new devices users to save some space. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-20b43: remove leftover code from old devices supportRafał Miłecki
Old devices (A-PHY or B-PHY) are supposed to be supported by b43legacy. We keep phy_a.c as it's needed for G-PHY which shares some design. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19b43: PHY: drop is_40mhz (get width info from chandef)Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19b43: store current channel using struct cfg80211_chan_defRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19b43: b43_op_config: set channel info before switching bandRafał Miłecki
Band switching code needs to know what channel we switch to. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19b43: b43_op_config: use IEEE80211_CONF_CHANGE_CHANNELRafał Miłecki
This is tiny optimization and grouping band/channel ops. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19b43: b43_op_config: drop check for core changeRafał Miłecki
There aren't devices with multiple 802.11 cores supported by b43. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-16b43: disable 5 GHz on G-PHYRafał Miłecki
This fixes regression introduced by adding some G-PHY devices to the list of dual band devices. There is simply no support for 5 GHz on G-PHY devices in b43. It results in: WARNING: CPU: 0 PID: 79 at drivers/net/wireless/b43/phy_g.c:75 b43_gphy_channel_switch+0x125/0x130 [b43]() b43-phy1 ERROR: PHY init: Channel switch to default failed Regression was introduced by the following commit: commit 773cfc508f4d64c14547ff8751b5cbd473124364 Author: Rafał Miłecki <zajec5@gmail.com> Date: Mon May 19 23:18:55 2014 +0200 b43: add more devices to the bands database Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29b43: N-PHY: optimize radio switching on/offRafał Miłecki
Broadcom's wl 6.30.223.141 has some optimizations for radios 0x205[67]. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29b43: PHY: allow init optimizations by tracking PHY stateRafał Miłecki
PHY has to be often re-initialized (e.g. during band switching after PHY reset), however some operations have to be performed only once (only power reset affects them). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22b43: fix list of 5 GHz channels for 802.11n cardsRafał Miłecki
Broadcom hardware uses a bit tricky hw_value-s for 5 GHz channels, values 184-228 are used for 4920-5140 MHz center frequencies. Normally you expect channels 7-16 (e.g. 5060 MHz is channel 12, not 212). We never meant to register hw_value 228 with freq 6140 MHz (5000 + 228 * 5). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22b43: fix typo in define name for 2 GHz channels (s/CHAN4G/CHAN2G/)Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-20b43: add more devices to the bands databaseRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-20b43: move bands detection to a separated functionRafał Miłecki
This cleans code a bit and allows adding support for more devices. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-19b43: rework band switchingRafał Miłecki
We always operate on one core and simple band switch doesn't require full core reset. Simply reset the PHY. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-19b43: complete PHY resetRafał Miłecki
Use separated function for taking PHY out of reset and implement reset for BCMA. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-19b43: move PHY reset code into PHY specific fileRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-19b43: split upload of init values into 2 functionsRafał Miłecki
There are two groups of init values. The first one has to be uploaded once per wireless core reset but the second one on every band switch. To implement band switching in an optimal way allow uploading band init values only (by using a separated function). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13b43: adjust code to compile without SSBRafał Miłecki
Users of new (BCMA based) wireless chipsets may not want to enable SSB. This is hopefully the last code patch for dropping SSB dependency. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30b43: don't pre-set radio_on variable to trueRafał Miłecki
Setting it to true during init doesn't seem to be any workaround while it can cause problems (not enabling radio due to belief it's enabled). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30b43: bcma: respect GMODE (band choice) during core resetRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22b43: remove list of IEEE 802.11 devicesRafał Miłecki
This is the first step to remove leftover code. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22b43: ssb: refuse to support more than IEEE 802.11 coreRafał Miłecki
Some ancient Broadcom devices had one core per band, e.g.: ssb: Found chip with id 0x4306, rev 0x02 and package 0x00 ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x02, vendor 0x4243) ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x04, vendor 0x4243) ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x01, vendor 0x4243) ssb: Core 3 found: V90 (cc 0x807, rev 0x01, vendor 0x4243) ssb: Core 4 found: PCI (cc 0x804, rev 0x07, vendor 0x4243) ssb: Core 5 found: IEEE 802.11 (cc 0x812, rev 0x04, vendor 0x4243) This hardware model was dropped for newer devices handled by b43. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-03net: Replace min macro with min_tSilvan Jegen
Instead of an explicit cast, use the min_t macro. Signed-off-by: Silvan Jegen <s.jegen@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-13b43: Fix unload oops if firmware is not availableLarry Finger
The asyncronous firmware load uses a completion struct to hold firmware processing until the user-space routines are up and running. There is. however, a problem in that the waiter is nevered canceled during teardown. As a result, unloading the driver when firmware is not available causes an oops. To be able to access the completion structure at teardown, it had to be moved into the b43_wldev structure. This patch also fixes a typo in a comment. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-13b43: Fix lockdep splatLarry Finger
In https://bugzilla.kernel.org/show_bug.cgi?id=67561, a locking dependency is reported when b43 is used with hostapd, and rfkill is used to kill the radio output. The lockdep splat (in part) is as follows: ====================================================== [ INFO: possible circular locking dependency detected ] 3.12.0 #1 Not tainted ------------------------------------------------------- rfkill/10040 is trying to acquire lock: (rtnl_mutex){+.+.+.}, at: [<ffffffff8146f282>] rtnl_lock+0x12/0x20 but task is already holding lock: (rfkill_global_mutex){+.+.+.}, at: [<ffffffffa04832ca>] rfkill_fop_write+0x6a/0x170 [rfkill] --snip-- Chain exists of: rtnl_mutex --> misc_mtx --> rfkill_global_mutex The fix is to move the initialization of the hardware random number generator outside the code range covered by the rtnl_mutex. Reported-by: yury <urykhy@gmail.com> Tested-by: yury <urykhy@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-26b43: call PCIe up and down functionsHauke Mehrtens
Tell the PCIe host core when the wifi is activated. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-27 07:28:42 +0000