summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/b43
AgeCommit message (Collapse)Author
2014-07-15b43; N-PHY: write most of the missing code for revs 7+Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15b43: N-PHY: add placeholders for new devices supportRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15b43: N-PHY: add TX gain tables for devices with specific EPARafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15b43: N-PHY: drop reg 0x1 access restriction on new PHY revsRafał Miłecki
Initialization of N-PHY radio revs 5 and 7 requires writing to 0x1. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15b43: always print info about radio (manuf, id, revision)Rafał Miłecki
Type of radio has a major meaning for the driver. There is quite some code that does initialization/calibration depending on the radio rev. Knowing radio params is quite important to provide help to users, so print it even with debugging disabled. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-10Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-07-07b43: fix reading info about radio for new devices (cores 40 & 42)Rafał Miłecki
This changes b43-phy0: Found Radio: Manuf 0x17F, Version 0x7769, Revision 4 to the b43-phy0: Found Radio: Manuf 0x17F, Version 0x2069, Revision 4 which matches what closed source driver reports: $ wl revinfo radiorev 0x42069000 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-07b43: N-PHY: add TX gains tables for radio 0x2057 rev 9Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-07b43: N-PHY: rework names & picking of TX gain tablesRafał Miłecki
This allows adding more revisions support, spotting lacking tables and unifies naming schema. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-07b43: N-PHY: initialize hardware tables on new devicesRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-01b43: add more bcma coresRafał Miłecki
This adds some cores with 0x2057 radio which will be supported soon as well as core 40 that I missed in the earlier firmware patch. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-01b43: N-PHY: complete generic support for 0x2057 radioRafał Miłecki
It doesn't include any device (radio revision) specific code yet, so it isn't really usable. As the commit says, it's just some generic code. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-01b43: N-PHY: fixes for radio 0x2057Rafał Miłecki
Enable initialization and update calibration code to fix: b43-phy0 ERROR: Radio 0x2057 rcal timeout b43-phy0 debug: Radio 0x2057 rccal timeout b43-phy0 debug: Radio 0x2057 rccal timeout b43-phy0 ERROR: Radio 0x2057 rcal timeout Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-01b43: treat LCNXN-PHY as extra N-PHY devicesRafał Miłecki
LCNXN is simply a continuation of N, e.g. code handling LCNXN revs 0 and 1 is mostly the same as for N-PHY revs 7+. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25b43: b43_phyops_a can be staticFengguang Wu
CC: "Rafał Miłecki" <zajec5@gmail.com> CC: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25b43: update list and code making a selection of firmware filesRafał Miłecki
Clean ucode selection, fix choice of firmware for LCN, drop some goto-s, add new devices. Tested on 14e4:4312, 14e4:4315, 14e4:4328, 14e4:432b, 14e4:4353. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25b43: N-PHY: update low-pass filter setupRafał Miłecki
Add support for external PA and clean code a bit. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25b43: N-PHY: update code for sending sample toneRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-20b43: add config for (en|dis)abling G-PHY supportRafał Miłecki
This allows new devices users to save some space. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-20b43: remove leftover code from old devices supportRafał Miłecki
Old devices (A-PHY or B-PHY) are supposed to be supported by b43legacy. We keep phy_a.c as it's needed for G-PHY which shares some design. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19b43: PHY: drop channel_type (we can get this info from chandef)Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19b43: PHY: drop is_40mhz (get width info from chandef)Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19b43: PHY: drop own channel_freq (get it from chandef when needed)Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19b43: store current channel using struct cfg80211_chan_defRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19b43: b43_op_config: set channel info before switching bandRafał Miłecki
Band switching code needs to know what channel we switch to. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19b43: PHY: don't force default channel during initRafał Miłecki
PHY may need to be re-initialized during runtime (e.g. on band switch). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19b43: b43_op_config: use IEEE80211_CONF_CHANGE_CHANNELRafał Miłecki
This is tiny optimization and grouping band/channel ops. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19b43: b43_op_config: drop check for core changeRafał Miłecki
There aren't devices with multiple 802.11 cores supported by b43. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19b43: drop B43_DEFAULT_CHANNELRafał Miłecki
It was never used, b43_switch_channel is always called with hw_value (from mac80211) or whatever get_default_chan returns. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-17b43: fix frequency reported on G-PHY with /new/ firmwareRafał Miłecki
Support for firmware rev 508+ was added years ago, but we never noticed it reports channel in a different way for G-PHY devices. Instead of offset from 2400 MHz it simply passes channel id (AKA hw_value). So far it was (most probably) affecting monitor mode users only, but the following recent commit made it noticeable for quite everybody: commit 3afc2167f60a327a2c1e1e2600ef209a3c2b75b7 Author: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Date: Tue Mar 4 16:50:13 2014 +0200 cfg80211/mac80211: ignore signal if the frame was heard on wrong channel Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: stable@vger.kernel.org Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-16b43: fix typo in Kconfig (make B43_BUSES_BCMA_AND_SSB the default for real)Rafał Miłecki
Reported-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-16b43: disable 5 GHz on G-PHYRafał Miłecki
This fixes regression introduced by adding some G-PHY devices to the list of dual band devices. There is simply no support for 5 GHz on G-PHY devices in b43. It results in: WARNING: CPU: 0 PID: 79 at drivers/net/wireless/b43/phy_g.c:75 b43_gphy_channel_switch+0x125/0x130 [b43]() b43-phy1 ERROR: PHY init: Channel switch to default failed Regression was introduced by the following commit: commit 773cfc508f4d64c14547ff8751b5cbd473124364 Author: Rafał Miłecki <zajec5@gmail.com> Date: Mon May 19 23:18:55 2014 +0200 b43: add more devices to the bands database Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29b43: N-PHY: optimize radio switching on/offRafał Miłecki
Broadcom's wl 6.30.223.141 has some optimizations for radios 0x205[67]. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29b43: N-PHY: optimize init by doing some ops just onceRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29b43: PHY: allow init optimizations by tracking PHY stateRafał Miłecki
PHY has to be often re-initialized (e.g. during band switching after PHY reset), however some operations have to be performed only once (only power reset affects them). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22b43: N-PHY: add missing calib values for radio 0x2026 rev 11Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22b43: fix list of 5 GHz channels for 802.11n cardsRafał Miłecki
Broadcom hardware uses a bit tricky hw_value-s for 5 GHz channels, values 184-228 are used for 4920-5140 MHz center frequencies. Normally you expect channels 7-16 (e.g. 5060 MHz is channel 12, not 212). We never meant to register hw_value 228 with freq 6140 MHz (5000 + 228 * 5). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22b43: fix typo in define name for 2 GHz channels (s/CHAN4G/CHAN2G/)Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-20b43: xmit: set 5 GHz bit depending on current bandRafał Miłecki
PHYs other than A may also work in 5 GHz mode. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-20b43: add more devices to the bands databaseRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-20b43: move bands detection to a separated functionRafał Miłecki
This cleans code a bit and allows adding support for more devices. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-19b43: make B43_PCMCIA and B43_SDIO depend on B43_SSBRafał Miłecki
These are extra configs specific to the SSB. Lack of this dependency and CONFIG_B43=y CONFIG_B43_BUSES_BCMA=y CONFIG_SSB=m would result in: > drivers/built-in.o: In function `b43_sdio_remove': > sdio.c:(.text+0x14657f): undefined reference to `ssb_bus_unregister' > drivers/built-in.o: In function `b43_sdio_probe': > sdio.c:(.text+0x14672f): undefined reference to `ssb_bus_sdiobus_register' Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-19b43: rework band switchingRafał Miłecki
We always operate on one core and simple band switch doesn't require full core reset. Simply reset the PHY. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-19b43: complete PHY resetRafał Miłecki
Use separated function for taking PHY out of reset and implement reset for BCMA. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-19b43: move PHY reset code into PHY specific fileRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-19b43: split upload of init values into 2 functionsRafał Miłecki
There are two groups of init values. The first one has to be uploaded once per wireless core reset but the second one on every band switch. To implement band switching in an optimal way allow uploading band init values only (by using a separated function). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13b43: drop SSB dependencyRafał Miłecki
This adds choice submenu "Supported bus types" as two simple bool configs would allow user to compile b43 without any bus support (prety useless). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13b43: adjust code to compile without SSBRafał Miłecki
Users of new (BCMA based) wireless chipsets may not want to enable SSB. This is hopefully the last code patch for dropping SSB dependency. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30b43: N-PHY: complete radio 0x2056 setupRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30b43: don't pre-set radio_on variable to trueRafał Miłecki
Setting it to true during init doesn't seem to be any workaround while it can cause problems (not enabling radio due to belief it's enabled). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-22 11:18:11 +0000