summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel
AgeCommit message (Collapse)Author
2016-02-27iwlwifi: mvm: Send power command on BSS_CHANGED_BEACON_INFO if neededAvri Altman
Beacon abort (ba) is set while sending power command, but only after at least one beacon_filter command was successfully sent. If we heard a beacon before starting association, this order is maintained and ba is properly set. However, if the first beacon is received after association, we send the power command upon association, configure the beacon filtering when the first beacon arrives, and in that case, beacon abort is not set. So identify this, and send a power command post the beacon_filter command if needed. Signed-off-by: Avri Altman <avri.altman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: mvm: forbid U-APSD for P2P Client if the firmware doesn't support itAvri Altman
Older versions of the firmware don't support U-APSD for P2P Client. Forbid U-APSD for P2P Client when an old firmware is being used. Signed-off-by: Avri Altman <avri.altman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: mvm: Set global RRM capabilityBeni Lev
Allow to publish RRM capabilities without the need to support a minimal capability set. Since some RRM features(e.g. neighbor report) are fw independent, set this capability unconditionally. Signed-off-by: Beni Lev <beni.lev@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: mvm: various trivial cleanupsEmmanuel Grumbach
* Remove uneeded includes: iwl-csr.h and devcoredump aren't used in mac80211.c. * Remove uneeded empty line Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: mvm: support VHT MU-MIMO notificationSara Sharon
When the device is in d0i3/d3 we will not receive the VHT MU-MIMO group id management frame. Instead, firmware will notify us upon exit on the current status and we can in turn update mac80211. Support this notification. While at it, also check as a precaution that the vif is indeed the VHT MU-MIMO owner before updating the firmware. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: mvm: remove unused field in iwl_mvm_tid_dataEmmanuel Grumbach
Commit 69c7fda40921c125eeeef6a827f6270ac6aa1baa removed the users of iwl_mvm_tid_data.reduced_tpc. Due to a conflict, I forgot to commit the hunk that removed the field itself. Do this know. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: mvm: add RSS queues notification infrastructureSara Sharon
In multi rx queue HW, without execessive locking, there is no sync between the ctrl path (default queue) and the rest of the rx queues. This might cause issues on certain situations. For example, in case a delBA was processed on a default queue but out of order packets still wait for processing on the other queue. The solution is to introduce internal messaging between the CTRL path and the other rx queues. The driver will send a message to the firmware, which will echo it to all the requested queues. The message will be in order inside the queue. This way we can avoid CTRL path and RSS queues races. Add support for this messaging mechanism. As the firmware is agnostic to the data sent, add internal representation of the data as well. Although currently only delBA flow will use it, the internal representation will enable generic use of this infrastructure for future uses. Next patch will utilize this messaging mechanism for the reorder buffer delBA flow. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: mvm: add duplicate packet detection per rx queueSara Sharon
Next hardware will direct TCP/UDP streams to different cores. Packets belonging to the same stream will be directed to the same core. The result is that duplicates will be always directed to the same rx queue were the first packet was received. This enabled parallelizing the duplicate packet detection across the different cores, without sharing data between the rx queues. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: pcie: prevent skbs shadowing in iwl_trans_pcie_reclaimEmmanuel Grumbach
The patch below introduced a variable shadowing. Fix that. Fixes: 3955525d5d17 ("iwlwifi: pcie: buffer packets to avoid overflowing Tx queues") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: pcie: add pm_prepare and pm_complete opsLuca Coelho
With these ops, we can know when we are about to enter system suspend. This allows us to exit D0i3 state before entering suspend. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: pcie: configure more RFH settingsSara Sharon
Fine tune RFH registers further: * Set default queue explicitly * Set RFH to drop frames exceeding RB size * Set the maximum rx transfer size to DRAM to 128 instead of 64 Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: mvm: support filtered frames notificationSara Sharon
During d0i3 frames might be filtered by the FW and this may cause reordering buffer a delay - as the frames will not be received and reorder will time out. Introduce an API function to receive notification of filtered frames and pass the information to the mac80211. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: mvm: update rx_status with mactime flagSara Sharon
When forming IBSS, mac80211 scans in order to find an already existing cell to join. In case the scan does not find any existing cell a new IBSS cell is formed. When receiving the beacons of another IBSS cell we should merge if the other IBSS cell's TSF is higher than ours. However, currently iwlmvm does not set any timestamp flag in rx_status so there is no valid rx timestamp to compare the beacon's TSF to. The reason for that is that TSF as indicated by the firmware is at INA time, but up till now mac80211 expected the TSF at the beginning or end of the MPDU. Set the flag to the newly added RX_FLAG_MACTIME_PLCP_START flag. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: support tracing wide commandsSara Sharon
Current iwlwifi_trace_dev_rx prints only the cmd without the group, which might be misleading. Change it to print the wide id. While at it add the DATA_PATH group and sub commands to the trace of the command names, sine it is missing due to patches submitted in parallel. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: mvm: don't send an A-MSDU that is larger than the TXFEmmanuel Grumbach
The A-MSDU must be smaller than the Transmit FIFO in the device. Since the size of the TXF can change depending on the device / firmware compilation mode, take the size of the FIFO dynamically from the what the firmware tells us. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: mvm: don't enable A-MSDU when the rates are too lowEmmanuel Grumbach
Allow A-MSDU only when we are not downscaling and the initial MCS is at least 5. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: mvm: allow to limit the A-MSDU from debugfsEmmanuel Grumbach
in order to be able to tune the size of the desired A-MSDU based on link condition, add a knob to modify the length of the A-MSDU. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: mvm: add Tx A-MSDU inside A-MPDUEmmanuel Grumbach
If the peer allows, we can have A-MSDU inside A-MDPU. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: mvm: send large SKBs to the transportEmmanuel Grumbach
Now that PCIe knows how to create A-MSDUs, use this capability and prepare SKBs that are large enough to build an A-MSDU. Advertise TSO support towards the network stack and segment the packet with gso_size set to be the maximal A-MSDU length (after having taken the headers to be added into account) to make sure that the skb that is passed down to the transport are not longer than the maximal A-MSDU allowed. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: mvm: update firmware of VHT MU-MIMO groups status on restartSara Sharon
The firmware handles the VHT MU-MIMO group data on its own. However, on HW restart (and future sniffer mode) the driver shall update the firmware on the VHT MU-MIMO group membership status. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: mvm: enable VHT MU-MIMO for supported hardwareSara Sharon
Incoming hardware will support VHT MU-MIMO. Declare this capability for relevant hardware. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: pcie: fix identation in trans.cEmmanuel Grumbach
A curly brace was misplaced, fix this. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: pcie: Add new configuration to enable MSIXHaim Dreyfuss
Working with MSIX requires prior configuration. This includes requesting interrupt vectors from the OS, registering the vectors and mapping the optional causes to the relevant interrupt. In addition add new interrupt handler to handle MSIX interrupt. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: pcie: aggregate Flow Handler configuration writesEmmanuel Grumbach
Instead of waking up the device each time we write a register, wake it up once, and writes the registers at once. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: mvm: bump firmware API to 21Emmanuel Grumbach
The driver is now ready to handle this firmware. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: mvm: rs: fix a theoretical access to uninitialized array elementsEyal Shapira
Klocwork is unhappy as ht_vht_rates might be accessed with rate->index being set to values between 0 and 3 which will lead to accessing uninitialized array elements. Effectively this doesn't happen as in HT/VHT we're not using these rate indices. Still fix this. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: mvm: handle pass all scan reportingLuca Coelho
The firmware doesn't send match found notifications when no matchsets are passed. This makes sense because if there are no matchsets, nothing can be matched. But the nl80211 API should report when there are results available, even if no matchsets were passed. To handle this, we can use the firmware's ITERATION_COMPLETE reporting, which will send us notifications every time it completed a scheduled scan iteration. Then we can set a flag when we received beacons and use that to report that results are available. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27Merge tag 'iwlwifi-for-kalle-2016-02-15' into HEADEmmanuel Grumbach
These are a few fixes for the current cycle. 3 out of the 5 patches fix a bugzilla. * fix a race that users reported when we try to load the firmware and the hardware rfkill interrupt triggers at the same time. * Luca fixes a very visible bug in scheduled scan: our firmware doesn't support scheduled scan with no profile configured and the supplicant sometimes requests such scheduled scans. * build system fix * firmware name update for 8265 * typo fix in return value
2016-02-27iwlwifi: mvm: fix RSS key sizingSara Sharon
The initialization and copying of the RSS secret key should not use ARRAY_SIZE as we need to initialize a dword array, and not a byte array. Fix also the hook maximum write size to allow writing a longer table - up to full indirection table size. Fixes: 43413a975d06("iwlwifi: mvm: support rss queues configuration command") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: mvm: set the correct descriptor size for tracingSara Sharon
The 9000 series uses a diffrent sized descriptor. Update the relevant tracing field. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: mvm: add registration to cooling deviceChaya Rachel Ivgi
Register cooling device in order to have the Thermal Manager handle the device's power budget according to the sent notifications. The interface adds a new thermal cooling device to /sys/class/thermal/ folder. Signed-off-by: Chaya Rachel Ivgi <chaya.rachel.ivgi@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: mvm: add registration to thermal zoneChaya Rachel Ivgi
Register to thermal_zone interface and implement the thermal ops. The thermal handles the device throttling, and sets the the temperature thresholds the Thermal Manager would be notified of crossing. The thermal interface adds a new thermal zone device sensor under /sys/class/thermal/ folder. Signed-off-by: Chaya Rachel Ivgi <chaya.rachel.ivgi@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: mvm: add CT-KILL notificationChaya Rachel Ivgi
Up to today the driver was notified of the temperature from the FW and decided whether to enter CT-kill or not. From now on, the FW will decide when to enter CT-kill and will notify the driver. Add support for this notification. Signed-off-by: Chaya Rachel Ivgi <chaya.rachel.ivgi@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27Merge tag 'mac80211-next-for-davem-2016-02-26' into next2Emmanuel Grumbach
Here's another round of updates for -next: * big A-MSDU RX performance improvement (avoid linearize of paged RX) * rfkill changes: cleanups, documentation, platform properties * basic PBSS support in cfg80211 * MU-MIMO action frame processing support * BlockAck reordering & duplicate detection offload support * various cleanups & little fixes
2016-02-24mac80211: remove ieee80211_get_key_tx_seq/ieee80211_set_key_tx_seqEliad Peller
Since the PNs of all the tx keys are now tracked in the public part of the key struct (with atomic counter), we no longer need these functions. dvm and vt665{5,6} are currently the only users of these functions, so update them accordingly. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24iwlwifi: mvm: move TX PN assignment for TKIP to the driverEliad Peller
If protocol offloading is configured, the fw might generate some frames (e.g. arp response) on its own during d3/d0i3. On d3/d0i3 exit the driver queries the updated PN (if relevant), and updates its keys (for the d0i3 case, this is done by iwl_mvm_d0i3_exit_work(), which is scheduled on d0i3 exit) While in d0i3, iwlmvm defers tx frames until d0i3 exit, and then continues their processing. This is problematic with TKIP, since the frame's PN has already been set at this stage (in contrast to CCMP, where the PN is being set only later on), so both the frame's PN and the upcoming PN update (from d0i3 exit work) might be wrong. Fix it by moving the TX PN assignment (for TKIP) to the driver, similarly to CCMP. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-23iwlwifi: mvm: Fix paging memory leakMatti Gottlieb
If the opmode is stopped and started again we did not free the paging buffers. Fix that. In addition when freeing the firmware's paging download buffer, set the pointer to NULL. Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/phy/bcm7xxx.c drivers/net/phy/marvell.c drivers/net/vxlan.c All three conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16Merge tag 'wireless-drivers-next-for-davem-2016-02-12' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== Major changes: wl12xx * add device tree support for SPI mwifiex * add debugfs file to read chip information * add MSIx support for newer pcie chipsets (8997 onwards) * add schedule scan support * add WoWLAN net-detect support * firmware dump support for w8997 chipset iwlwifi * continue the work on multiple Rx queues * add support for beacon storing used in low power states * use the regular firmware image of WoWLAN * fix 8000 devices for Big Endian machines * more firmware debug hooks * add support for P2P Client snoozing * make the beacon filtering for AP mode configurable * fix transmit queues overflow with LSO libertas * add support for setting power save via cfg80211 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16Merge tag 'iwlwifi-for-kalle-2016-02-15' of ↵Kalle Valo
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes These are a few fixes for the current cycle. 3 out of the 5 patches fix a bugzilla. * fix a race that users reported when we try to load the firmware and the hardware rfkill interrupt triggers at the same time. * Luca fixes a very visible bug in scheduled scan: our firmware doesn't support scheduled scan with no profile configured and the supplicant sometimes requests such scheduled scans. * build system fix * firmware name update for 8265 * typo fix in return value
2016-02-16iwlwifi: mvm: inc pending frames counter also when txing non-staLiad Kaufman
Until this patch, when TXing non-sta the pending_frames counter wasn't increased, but it WAS decreased in iwl_mvm_rx_tx_cmd_single(), what makes it negative in certain conditions. This in turn caused much trouble when we need to remove the station since we won't be waiting forever until pending_frames gets 0. In certain cases, we were exhausting the station table even in BSS mode, because we had a lot of stale stations. Increase the counter also in iwl_mvm_tx_skb_non_sta() after a successful TX to avoid this outcome. CC: <stable@vger.kernel.org> [3.18+] Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-15iwlwifi: pcie: fix erroneous return valueAnton Protopopov
The iwl_trans_pcie_start_fw() function may return the positive value EIO instead of -EIO in case of error. Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-15iwlwifi: pcie: fix RF-Kill vs. firmware load raceEmmanuel Grumbach
When we load the firmware, we hold trans_pcie->mutex to avoid nested flows. We also rely on the ISR to wake up the thread when the DMA has finished copying a chunk. During this flow, we enable the RF-Kill interrupt. The problem is that the RF-Kill interrupt handler can take the mutex and bring the device down. This means that if we load the firmware while the RF-Kill switch is enabled (which will happen when we load the INIT firmware to read the device's capabilities and register to mac80211), we may get an RF-Kill interrupt immediately and the ISR will be waiting for the mutex held by the thread that is currently loading the firmware. At this stage, the ISR won't be able to service the DMA's interrupt needed to wake up the thread that load the firmware. We are in a deadlock situation which ends when the thread that loads the firmware fails on timeout and releases the mutex. To fix this, take the mutex later in the flow, disable the interrupts and synchronize_irq() to give a chance to the RF-Kill interrupt to run and complete. After that, mask all the interrupts besides the DMA interrupt and proceed with firmware load. Make sure to check that there was no RF-Kill interrupt when the interrupts were disabled. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=111361 Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-15iwlwifi: mvm: don't allow sched scans without matches to be startedLuca Coelho
The firmware can perform a scheduled scan with not matchsets passed, but it can't send notification that results were found. Since the userspace then cannot know when we got new results and the firmware wouldn't trigger a wake in case we are sleeping, it's better not to allow scans without matchsets. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=110831 Cc: <stable@vger.kernel.org> [3.17+] Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-10iwlwifi: dvm: remove a wrong dependency on mEmmanuel Grumbach
This was wronly added when the dependency on IWLWIFI was removed. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=112201 Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-01iwlwifi: mvm: allow to disable beacon filtering for AP/GO interfaceAndrei Otcheretianski
When in AP mode we need to filter in beacons from other APs to update HT operation mode. As a power optimization the beacons are filtered out when there are no associated stations. As a result, when there are no associated stations, we will not update the HT operation mode until a station connects. Add a debugfs parameter that allows to disable this optimization. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-01iwlwifi: pcie: update iwl_mpdu_desc fieldsSara Sharon
Final API of iwl_mpdu_desc has a change in the order of the fields and does not include energy from the third antenna (which is perfectly fine, since we don't have one). Update the structure accordingly. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-01iwlwifi: pcie: enable multi-queue rx pathSara Sharon
Previous patches enabled new 9000 hardware DMA for one queue only. Enable the actual multi-queue path and configuration now. This requires also per-queue NAPI struct. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-01iwlwifi: mvm: support rss queues configuration commandSara Sharon
9000 series supports multi-queue rx. The hardware needs to be configured with the hash functions to perform and indirection table that maps hash results to the relevant CPUs\queues. Support this configuration. Add debugfs hook to configure the indirection table in order to enable performance analysis. The configuration is stateless, receives a partial or full pattern and sends the command to the firmware. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-01iwlwifi: mvm: rs: fix TPC action decision algorithmGregory Greenman
Decreasing Tx power is allowed only when success ratio is above the threshold defined in the algorithm. Add this condition. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-21 00:13:47 +0000