summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi/pcie
AgeCommit message (Collapse)Author
2013-01-03iwlwifi: fix PCIe interrupt handle return valueJohannes Berg
By accident, commit eb6476441bc2fecf6232a87d0313a85f8e3da7f4 ("iwlwifi: protect use_ict with irq_lock") changed the return value of the iwl_pcie_isr() function in case it handles an interrupt -- it now returns IRQ_NONE instead of IRQ_HANDLED. Put back the correct return value. Cc: stable@vger.kernel.org Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03iwlwifi: let the op_mode run a FW while in RFKILLEmmanuel Grumbach
In some cases, the fw should run even if the NIC is in RFKILL. Make the API more flexible to allow that. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03iwlwifi: make the BC table layout configurableEmmanuel Grumbach
This is needed for newer NICs. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-13Merge tag 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds
Pull PCI update from Bjorn Helgaas: "Host bridge hotplug: - Untangle _PRT from struct pci_bus (Bjorn Helgaas) - Request _OSC control before scanning root bus (Taku Izumi) - Assign resources when adding host bridge (Yinghai Lu) - Remove root bus when removing host bridge (Yinghai Lu) - Remove _PRT during hot remove (Yinghai Lu) SRIOV - Add sysfs knobs to control numVFs (Don Dutile) Power management - Notify devices when power resource turned on (Huang Ying) Bug fixes - Work around broken _SEG on HP xw9300 (Bjorn Helgaas) - Keep runtime PM enabled for unbound PCI devices (Huang Ying) - Fix Optimus dual-GPU runtime D3 suspend issue (Dave Airlie) - Fix xen frontend shutdown issue (David Vrabel) - Work around PLX PCI 9050 BAR alignment erratum (Ian Abbott) Miscellaneous - Add GPL license for drivers/pci/ioapic (Andrew Cooks) - Add standard PCI-X, PCIe ASPM register #defines (Bjorn Helgaas) - NumaChip remote PCI support (Daniel Blueman) - Fix PCIe Link Capabilities Supported Link Speed definition (Jingoo Han) - Convert dev_printk() to dev_info(), etc (Joe Perches) - Add support for non PCI BAR ROM data (Matthew Garrett) - Add x86 support for host bridge translation offset (Mike Yoknis) - Report success only when every driver supports AER (Vijay Pandarathil)" Fix up trivial conflicts. * tag 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (48 commits) PCI: Use phys_addr_t for physical ROM address x86/PCI: Add NumaChip remote PCI support ath9k: Use standard #defines for PCIe Capability ASPM fields iwlwifi: Use standard #defines for PCIe Capability ASPM fields iwlwifi: collapse wrapper for pcie_capability_read_word() iwlegacy: Use standard #defines for PCIe Capability ASPM fields iwlegacy: collapse wrapper for pcie_capability_read_word() cxgb3: Use standard #defines for PCIe Capability ASPM fields PCI: Add standard PCIe Capability Link ASPM field names PCI/portdrv: Use PCI Express Capability accessors PCI: Use standard PCIe Capability Link register field names x86: Use PCI setup data PCI: Add support for non-BAR ROMs PCI: Add pcibios_add_device EFI: Stash ROMs if they're not in the PCI BAR PCI: Add and use standard PCI-X Capability register names PCI/PM: Keep runtime PM enabled for unbound PCI devices xen-pcifront: Handle backend CLOSED without CLOSING PCI: SRIOV control and status via sysfs (documentation) PCI/AER: Report success only when every device has AER-aware driver ...
2012-12-11Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2012-12-10iwlwifi: don't handle masked interruptEmmanuel Grumbach
This can lead to a panic if the driver isn't ready to handle them. Since our interrupt line is shared, we can get an interrupt at any time (and CONFIG_DEBUG_SHIRQ checks that even when the interrupt is being freed). If the op_mode has gone away, we musn't call it. To avoid this the transport disables the interrupts when the hw is stopped and the op_mode is leaving. If there is an event that would cause an interrupt the INTA register is updated regardless of the enablement of the interrupts: even if the interrupts are disabled, the INTA will be changed, but the device won't issue an interrupt. But the ISR can be called at any time, so we ought ignore the value in the INTA otherwise we can call the op_mode after it was freed. I found this bug when the op_mode_start failed, and called iwl_trans_stop_hw(trans, true). Then I played with the RFKILL button, and removed the module. While removing the module, the IRQ is freed, and the ISR is called (CONFIG_DEBUG_SHIRQ enabled). Panic. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-07iwlwifi: Use standard #defines for PCIe Capability ASPM fieldsBjorn Helgaas
Use the standard #defines rather than creating local definitions for PCIe Capability ASPM fields. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Johannes Berg <johannes.berg@intel.com>
2012-12-07iwlwifi: collapse wrapper for pcie_capability_read_word()Bjorn Helgaas
iwl_pciexp_link_ctrl() has only one call site and no longer provides any useful abstraction, so collapse it into the caller. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Johannes Berg <johannes.berg@intel.com>
2012-12-06iwlwifi: reset_ict in stop_hwEmmanuel Grumbach
Since the device is taken down in stop_hw, call reset_ict from there too. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-06iwlwifi: move prph handling into the transportEmmanuel Grumbach
New transports may handle it internally for better performance. Also move the tracing inside PRPH access which will make the output more readable: iwlwifi_dev_ioread_prph32: Read 0x0 from SCD_AGGR_SEL (32-bit) instead of the corresponding accesses to HBUS_TARG_PRPH_*. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-06iwlwifi: Change define and struct names in iwl-eeprom-parse.hEytan Lifshitz
Since we will have several forms of NVM (EEPROM, OTP, etc.) and they will have different layouts, make the parsed data more generic. This allows functional code to be independent of a specific layout. Also change some variables and function names from having "eeprom" to "nvm" in their name. Signed-off-by: Eytan Lifshitz <eytan.lifshitz@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-06iwlwifi: remove __dev* attributesBill Pemberton
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Wey-Yi Guy <wey-yi.w.guy@intel.com> Cc: Intel Linux Wireless <ilw@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-29iwlwifi: return real info in probe failureEmmanuel Grumbach
Don't return a hard coded -EFAULT, but rather the error that occurred in the flow. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-28iwlwifi: read the Rx write pointer only onceEmmanuel Grumbach
The FH (DMA engine) tells the driver the index of the last ready (closed) Rx buffer. This data is in closed_rb_num. If we read this data several times we may get inconsistencies between the code and the debug prints which can make it harder to debug issues here. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-21Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Conflicts: drivers/net/wireless/iwlwifi/pcie/trans.c
2012-11-21Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c drivers/net/wireless/iwlwifi/pcie/tx.c
2012-11-19iwlwifi: Remove duplicate inclusion of iwl-trans.h in pcie/drv.cSachin Kamat
iwl-trans.h was included twice. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-19iwlwifi: make iwl_pcie_rxq_inc_wr_ptr staticEmmanuel Grumbach
It is not used outside pcie/rx.c. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-19iwlwifi: more cleanup in pcie/rx.cEmmanuel Grumbach
Really trivial clean up. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-19iwlwifi: make iwl_queue_used return boolEmmanuel Grumbach
Also, prefer the if(!X) notation over if(X == 0). Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-19iwlwifi: merge 2 functions in reclaim flowEmmanuel Grumbach
One one just a wrapper of the second, squash them. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-19iwlwifi: continue clean up - pcie/tx.cEmmanuel Grumbach
Rename static functions. Function moved from trans.c to tx.c. A few could be made static, others had to be exported. Functions that implement the transport API are prefixed by iwl_trans_pcie_, the others by iwl_pcie_. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-19iwlwifi: continue clean up - pcie/trans.cEmmanuel Grumbach
Functions that implement the transport API are prefixed by iwl_trans_pcie_, the others by iwl_pcie_. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-19iwlwifi: continue clean up - pcie/rx.cEmmanuel Grumbach
Rename static functions. Function moved from trans.c to rx.c. A few could be made static, others had to be exported. Also, don't use rxb or rxbuf, but rb which stands for receive buffer. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-19iwlwifi: init the replenish work in rx_initEmmanuel Grumbach
This is its natural place Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-19iwlwifi: rename functions in transport layerEmmanuel Grumbach
1) s/tx_queue/txq for the sake of consistency. 2) s/rx_queue/rxq for the sake of consistency. 3) Make all functions begin with iwl_pcie_ iwl_queue_init and iwl_queue_space are an exception since they are not PCIE specific although they are in pcie subdir. 4) s/trans_pcie_get_cmd_string/get_cmd_string it is much shorter and used in debug prints which are long lines. 5) s/iwl_bg_rx_replenish/iwl_pcie_rx_replenish_work this better emphasizes that it is a work 6) remove invalid kernelDOC markers pcie/tx.c and pcie/trans.c still needs to be cleaned up. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-19iwlwifi: add comments for the PCIe transport statusesEmmanuel Grumbach
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-18iwlwifi: don't WARN when a non empty queue is disabledEmmanuel Grumbach
This can happen when we shut down suddenly an interface. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Conflicts: drivers/net/wireless/iwlwifi/pcie/trans.c
2012-11-14wireless: Convert dev_printk(KERN_<LEVEL> to dev_<level>(Joe Perches
dev_<level> calls take less code than dev_printk(KERN_<LEVEL> and reducing object size is good. Coalesce formats for easier grep. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-14iwlwifi: don't enable interrupt as a W/A when MSI is enabledEmmanuel Grumbach
This is not needed, the comment there was wrong, it is only needed when MSI was *not* enabled. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-14iwlwifi: don't warn if transport's allocation failedEmmanuel Grumbach
The allocation failure will already be very verbose. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-09iwlwifi: return commands with error on FW errorJohannes Berg
When a firmware error occurs, don't just abort synchronous commands but also return an error (-EIO) and block any new commands as well. Currently, an error is only returned if WANT_SKB was set which is confusing and can lead to issues. Blocking is done until a new firmware image is loaded. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-07iwlwifi: remove useless messagesJohannes Berg
There's no need to print the PCI resource length and base address, nor the hardware revision ID (which can be found in lspci) Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-05iwlwifi: check the SCD conf from ALIVE responseEmmanuel Grumbach
The ALIVE response of new fw inclues the base address of the SCD in SRAM. Until we read it from a prph register, which was set by the fw. Since the fw might well stop updating the prph register, add a WARN when there is an inconsitency between the ALIVE response and the register to catch any change in the behavior. Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-05iwlwifi: use list_first_entryJohannes Berg
Instead of open-coding it with a temporary list_head pointer, just use list_first_entry. Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-05iwlwifi: handle DMA mapping failuresJohannes Berg
The RX replenish code doesn't handle DMA mapping failures, which will cause issues if there actually is a failure. This was reported by Shuah Khan who found a DMA mapping framework warning ("device driver failed to check map error"). Cc: stable@vger.kernel.org Reported-by: Shuah Khan <shuah.khan@hp.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-31iwlwifi: handle RFKILL logic in the transport layerEmmanuel Grumbach
No HCMD can be sent while RFKILL is asserted. If a SYNC command is running while RFKILL is asserted the fw will silently discard it. This means that the driver needs to wake the process that sleeps on the CMD_SYNC. Since the RFKILL interrupt is handled in the transport layer and the code that sleeps in CMD_SYNC is also in the transport layer, all this logic can be handled there. This simplifies the work of the op_mode. So the transport layer will now return -ERFKILL when a CMD is sent and RFKILL is asserted. This will be the case even when the CMD is SYNC. The transport layer will return -ERFKILL straight away. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-29iwlwifi: support host command with copied dataJohannes Berg
In addition to the NOCOPY flag, add a DUP flag that tells the transport to kmemdup() the buffer and free it after the command completes. Currently this is only supported for a single buffer in a given command, but that could be extended if it should be needed. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-23iwlwifi: don't leak Tx skb when a queue is disabledEmmanuel Grumbach
Since the queue might not be empty, we need to free the pending Tx packets. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-16iwlwifi: don't WARN when a non empty queue is disabledEmmanuel Grumbach
This can happen when we shut down suddenly an interface. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-16iwlwifi: first deactivate a queue, then wipe out its dataEmmanuel Grumbach
Doing the opposite is wrong, the SCD wouldn't like someone to clear its data while the queue is still active. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-16iwlwifi: use the new macro for the SCD Q STTS bitsEmmanuel Grumbach
Instead of hardcoding the expression, use the macro provided in the previous patch. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-16iwlwifi: wipe out the status of the SCD when we disable a queueEmmanuel Grumbach
When we disable a queue, we don't want the SCD to remember anything about this queue (what packet was transmitted but not acked, what packed was acked etc...). Wipe out all this data in its SRAM. Constify the arguments to iwl_write_targ_mem_dwords on the way. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-16iwlwifi: remove unused variablesJohannes Berg
Remove a number of variables that are assigned, but not used. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-16iwlwifi: make data frame tracing optionalJohannes Berg
When tracing in iwlwifi, we get all data. Most of the time, we don't need it, and it just takes up a lot of extra space in the trace. Make this optional by recording the data into two separate trace events if it is needed. Without it, record only the content of non-data and EAPOL TX frames. As a result, tracing without the data tracepoints will record meta information including the 802.11 headers for all frames but will not record the contents of data frames to reduce trace overhead. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-16iwlwifi: improve oversized command warningJohannes Berg
When warning about a command that is too large, print out the command name/ID to help figure out which place is attempting to send a command that is too large. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking changes from David Miller: 1) GRE now works over ipv6, from Dmitry Kozlov. 2) Make SCTP more network namespace aware, from Eric Biederman. 3) TEAM driver now works with non-ethernet devices, from Jiri Pirko. 4) Make openvswitch network namespace aware, from Pravin B Shelar. 5) IPV6 NAT implementation, from Patrick McHardy. 6) Server side support for TCP Fast Open, from Jerry Chu and others. 7) Packet BPF filter supports MOD and XOR, from Eric Dumazet and Daniel Borkmann. 8) Increate the loopback default MTU to 64K, from Eric Dumazet. 9) Use a per-task rather than per-socket page fragment allocator for outgoing networking traffic. This benefits processes that have very many mostly idle sockets, which is quite common. From Eric Dumazet. 10) Use up to 32K for page fragment allocations, with fallbacks to smaller sizes when higher order page allocations fail. Benefits are a) less segments for driver to process b) less calls to page allocator c) less waste of space. From Eric Dumazet. 11) Allow GRO to be used on GRE tunnels, from Eric Dumazet. 12) VXLAN device driver, one way to handle VLAN issues such as the limitation of 4096 VLAN IDs yet still have some level of isolation. From Stephen Hemminger. 13) As usual there is a large boatload of driver changes, with the scale perhaps tilted towards the wireless side this time around. Fix up various fairly trivial conflicts, mostly caused by the user namespace changes. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1012 commits) hyperv: Add buffer for extended info after the RNDIS response message. hyperv: Report actual status in receive completion packet hyperv: Remove extra allocated space for recv_pkt_list elements hyperv: Fix page buffer handling in rndis_filter_send_request() hyperv: Fix the missing return value in rndis_filter_set_packet_filter() hyperv: Fix the max_xfer_size in RNDIS initialization vxlan: put UDP socket in correct namespace vxlan: Depend on CONFIG_INET sfc: Fix the reported priorities of different filter types sfc: Remove EFX_FILTER_FLAG_RX_OVERRIDE_IP sfc: Fix loopback self-test with separate_tx_channels=1 sfc: Fix MCDI structure field lookup sfc: Add parentheses around use of bitfield macro arguments sfc: Fix null function pointer in efx_sriov_channel_type vxlan: virtual extensible lan igmp: export symbol ip_mc_leave_group netlink: add attributes to fdb interface tg3: unconditionally select HWMON support when tg3 is enabled. Revert "net: ti cpsw ethernet: allow reading phy interface mode from DT" gre: fix sparse warning ...
2012-10-01Merge tag 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds
Pull PCI changes from Bjorn Helgaas: "Host bridge hotplug - Protect acpi_pci_drivers and acpi_pci_roots (Taku Izumi) - Clear host bridge resource info to avoid issue when releasing (Yinghai Lu) - Notify acpi_pci_drivers when hot-plugging host bridges (Jiang Liu) - Use standard list ops for acpi_pci_drivers (Jiang Liu) Device hotplug - Use pci_get_domain_bus_and_slot() to close hotplug races (Jiang Liu) - Remove fakephp driver (Bjorn Helgaas) - Fix VGA ref count in hotplug remove path (Yinghai Lu) - Allow acpiphp to handle PCIe ports without native hotplug (Jiang Liu) - Implement resume regardless of pciehp_force param (Oliver Neukum) - Make pci_fixup_irqs() work after init (Thierry Reding) Miscellaneous - Add pci_pcie_type(dev) and remove pci_dev.pcie_type (Yijing Wang) - Factor out PCI Express Capability accessors (Jiang Liu) - Add pcibios_window_alignment() so powerpc EEH can use generic resource assignment (Gavin Shan) - Make pci_error_handlers const (Stephen Hemminger) - Cleanup drivers/pci/remove.c (Bjorn Helgaas) - Improve Vendor-Specific Extended Capability support (Bjorn Helgaas) - Use standard list ops for bus->devices (Bjorn Helgaas) - Avoid kmalloc in pci_get_subsys() and pci_get_class() (Feng Tang) - Reassign invalid bus number ranges (Intel DP43BF workaround) (Yinghai Lu)" * tag 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (102 commits) PCI: acpiphp: Handle PCIe ports without native hotplug capability PCI/ACPI: Use acpi_driver_data() rather than searching acpi_pci_roots PCI/ACPI: Protect acpi_pci_roots list with mutex PCI/ACPI: Use acpi_pci_root info rather than looking it up again PCI/ACPI: Pass acpi_pci_root to acpi_pci_drivers' add/remove interface PCI/ACPI: Protect acpi_pci_drivers list with mutex PCI/ACPI: Notify acpi_pci_drivers when hot-plugging PCI root bridges PCI/ACPI: Use normal list for struct acpi_pci_driver PCI/ACPI: Use DEVICE_ACPI_HANDLE rather than searching acpi_pci_roots PCI: Fix default vga ref_count ia64/PCI: Clear host bridge aperture struct resource x86/PCI: Clear host bridge aperture struct resource PCI: Stop all children first, before removing all children Revert "PCI: Use hotplug-safe pci_get_domain_bus_and_slot()" PCI: Provide a default pcibios_update_irq() PCI: Discard __init annotations for pci_fixup_irqs() and related functions PCI: Use correct type when freeing bus resource list PCI: Check P2P bridge for invalid secondary/subordinate range PCI: Convert "new_id"/"remove_id" into generic pci_bus driver attributes xen-pcifront: Use hotplug-safe pci_get_domain_bus_and_slot() ...
2012-09-30Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John W. Linville says: ==================== Here is another batch of updates intended for 3.7... Highlights include an hci_connect re-write in Bluetooth, HCI/LLC layer separation in NFC, removal of the raw pn544 NFC driver, NFC LLCP raw sockets support, improved IBSS auth frame handling in mac80211, full-MAC AP mode notification support in mac80211, a lot of attention paid to brcmfmac, and the usual level of updates to iwlwifi, ath9k, mwifiex, and rt2x00, and various other updates. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-30 17:58:14 +0000