summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/rt2x00/rt2800lib.c
AgeCommit message (Collapse)Author
2013-07-22rt2x00: rt2800lib: add rf_vals for RF3053Gabor Juhos
Based on the Ralink DPO_RT5572_LinuxSTA_2.6.0.1_20120629 driver. References: FreqItems3053 in chips/rt3593.c Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22rt2x00: rt2800lib: add default_power3 field for three-chain devicesGabor Juhos
The actual code uses two default TX power values. This is enough for 1T and for 2T devices however on 3T devices another value is needed for the third chain. Add a new field to struct channel_info and initialize it from the 'rt2800_probe_hw_mode' function. Also modify the 'rt2800_config_channel' to handle the new field as well. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22rt2x00: rt2800lib: fix LNA_A[12] gain values for RT3593Gabor Juhos
The LNA_A[12] gain values are stored at a different offset in the EEPROM on RT3593 based devices. However the current code unconditionally reads those values from the location used by other chipsets. Fix the code to use the correct EEPROM offset. Based on the DPO_RT5572_LinuxSTA_2.6.0.1_20120629 driver. References: RT3593_EEPROM_RSSI2_OFFSET_ALNAGAIN1_24G_READ in include/chip/rt3593.h RT3593_EEPROM_RSSI2_OFFSET_ALNAGAIN2_5G_READ in include/chip/rt3593.h Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22rt2x00: rt2800lib: hardcode TX mixer gain values for RT3593Gabor Juhos
The reference code uses hardcoded zero TX mixer gain value for RT3593. Do the same in the rt2x00 driver. Based on the Ralink DPO_RT5572_LinuxSTA_2.6.0.1_20120629 driver. Reference: NICReadEEPROMParameters in common/rtmp_init.c Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22rt2x00: rt2800lib: introduce rt2800_get_txmixer_gain_{24,5}g helpersGabor Juhos
Move the TX mixer gain reading code into separate helper functions in preparation for RT3593 support. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22rt2x00: rt2800lib: fix default TX power values for RT3593Gabor Juhos
The TX power values in the EEPROM are using a different format for the RT3593 chip. The default TX power value uses bits 0..4 only. Bits 5..8 contains value for fine grained power control. Additionally, the lower and upper limits of the TX power values are the same for both bands. Improve the rt2800_txpower_to_dev function, in order to compute the correct default power values for the RT3593 chip as well. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22rt2x00: rt2800lib: add rt2800_txpower_to_dev helperGabor Juhos
Introduce a new helper function for converting the default TX power values from EEPROM into mac80211 values. The change improves the readability and it makes it easier to add support for other chipsets. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22rt2x00: rt2800lib: fix antenna configuration for RT3593Gabor Juhos
On the RT3593 chipset, BBP register 86 must be configured by different values based on the RX antenna numbers. Configure this register from the 'rt2800_config_ant' function. Based on the Ralink DPO_RT5572_LinuxSTA_2.6.0.1_20120629 driver. Reference: RT3593_CONFIG_SET_BY_ANTENNA in include/chip/rt3593.h Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22rt2x00: rt2800lib: fix BBP1_TX_ANTENNA field configuration for 3T devicesGabor Juhos
The field must be set to 2 instead of 0 for devices with three TX chains. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22rt2x00: rt2800lib: add TX power configuration for RT3593Gabor Juhos
Based on the Ralink DPO_RT5572_LinuxSTA_2.6.0.1_20120629 driver. References: RTMPReadTxPwrPerRateExt in chips/rt3593.c RT3593_AsicGetTxPowerOffset in chips/rt3593.c Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22rt2x00: rt2800lib: add BBP post initialization for RT3593Gabor Juhos
Based on the Ralink DPO_RT5572_LinuxSTA_2.6.0.1_20120629 driver. Reference: RT3593_PostBBPInitialization in chips/rt3553.c Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22rt2x00: rt2800lib: add RFCSR register initialization for RT3593Gabor Juhos
Based on the Ralink DPO_RT5572_LinuxSTA_2.6.0.1_20120629 driver. References: NICInitRT3593RFRegisters in chips/rt3593.c RT3593LoadRFNormalModeSetup in chips/rt3593.c Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22rt2x00: rt2800lib: add BBP register initialization for RT3593Gabor Juhos
Based on the Ralink DPO_RT5572_LinuxSTA_2.6.0.1_20120629 driver. References: NICInitRT3593BbpRegisters in chips/rt3593.c NICInitBBP in common/rtmp_init.c NICInitAsicFromEEPROM in common/rtmp_init.c Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22rt2x00: rt2800lib: add MAC register initialization for RT3593Gabor Juhos
Based on the Ralink DPO_RT5572_LinuxSTA_2.6.0.1_20120629 driver. Reference: NICInitRT3593MacRegisters in chips/rt3593.c Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22rt2x00: rt2800lib: add EEPROM map for the RT3593 chipsetGabor Juhos
Three-chain devices are using a different EEPROM layout than the rest of the chipsets. Add a new map which describes the new layout and use that for the RT3593 chipset. The index values has been computed from the EEPROM_EXT_* defines, which can be found in the 'include/chip/rt3593.h' file in the Ralink DPO_RT5572_LinuxSTA_2.6.0.1_20120629 driver. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22rt2x00: rt2800lib: introduce rt2800_eeprom_word_index helperGabor Juhos
Instead of assign the offset value to the enum directly use a new helper function to convert a rt2800_eeprom_word enum into an index of the rt2x00_dev->eeprom array. The patch does not change the existing behaviour, but makes it possible to add support for three-chain devices which are using a different EEPROM layout. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22rt2x00: rt2800lib: introduce rt2800_eeprom_read_from_array helperGabor Juhos
Add a new helper function and use that for reading single elements of various arrays in the EEPROM. The patch does not change the current behaviour, but it allows to use sequential values for the rt2800_eeprom_word enums. The conversion will be implemented in a subsequent change. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22rt2x00: rt2800lib: introduce local EEPROM access functionsGabor Juhos
The patch adds rt2800 specific functions for EEPROM data access and changes the code to use these instead of the generic rt2x00_eeprom_* variants. To avoid functional changes, the new functions are wrappers around the corresponding generic rt2x00_eeprom_* routines for now. Functional changes will be implemented in additional patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-27rt2x00: rt2800lib: fix default TX power check for RT55xxGabor Juhos
The code writes the default_power2 value into the TX field of the RFCSR50 register, however the condition in the if statement uses default_power1. Due to this, wrong TX power value might be written into the register. Use the correct value in the condition to fix the issue. Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: stable@vger.kernel.org # 3.10 Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-27rt2x00: rt2800lib: turn on tertiary PAs/LNAs for 3T/3R devicesGabor Juhos
The 3T/3R devices are using the tertiary PAs/LNAs however those are never turned on. Fix the code to turn on those on for such devices. Also modify the code to use switch statements to improve readability. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-27rt2x00: rt2800lib: turn on secondary PAs/LNAs for 3T/3R devicesGabor Juhos
The secondary PAs/LNAs are turned on only for 2T/2R devices, however these are used for 3T/3R devices as well. Always turn those on if the device uses more than one tx/rx chains. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-24rt2x00: read 5GHz TX power values from the correct offsetGabor Juhos
The current code uses the same index value both for the channel information array and for the TX power table. The index starts from 14, however the index of the TX power table must start from zero. Fix it, in order to get the correct TX power value for a given channel. The changes in rt61pci.c and rt73usb.c are compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: stable@vger.kernel.org Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-18Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2013-06-12rt2800: fix RT5390 & RT3290 TX power settings regressionStanislaw Gruszka
My change: commit cee2c7315f60beeff6137ee59e99acc77d636eeb Author: Stanislaw Gruszka <sgruszka@redhat.com> Date: Fri Oct 5 13:44:09 2012 +0200 rt2800: use BBP_R1 for setting tx power unfortunately does not work well with RT5390 and RT3290 chips as they require different temperature compensation TX power settings (TSSI tuning). Since that commit make wireless connection very unstable on those chips, restore previous behavior to fix regression. Once we implement proper TSSI tuning on 5390/3290 we can restore back setting TX power by BBP_R1 register for those chips. Reported-and-tested-by: Mike Romberg <mike-romberg@comcast.net> Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24rt2800: move 53xx specific bbp initializationStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24rt2800: move 3290 specific bbp initializationStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24rt2800: move 3352 specific bbp initializationStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24rt2800: initialize BBP_R108 on proper subroutinesStanislaw Gruszka
Create helper function and move initialization to subroutines. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24rt2800: initialize BBP_R104 on 3352 subroutineStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24rt2800: initialize BBP_R134 & BBP_R135 on 53xx subroutineStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24rt2800: initialize BBP_R128 on proper subroutinesStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24rt2800: initialize BBP_R120 on 3352 subroutineStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24rt2800: initialize BBP_R106 on all subroutines (except 5592)Stanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24rt2800: initialize BBP_R105 on all subroutines (except 5592)Stanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24rt2800: initialize BBP_R104 on proper subroutinesStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24rt2800: initialize BBP_R103 on all subroutines (except 5592)Stanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24rt2800: move initialization of BBP_95 & BBP_98 to 53xx subroutineStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24rt2800: initialize BBP_R92 on all subroutines (except 5592)Stanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24rt2800: initialize BBP_R91 on all subroutines (except 5592)Stanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24rt2800: initialize BBP_R88 on proper subroutinesStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24rt2800: initialize BBP_R86 on all subroutines (except 5592)Stanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24rt2800: initialize BBP_R84 on all subroutines (except 5592)Stanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24rt2800: initialize BBP_R83 on all subroutines (except 5592)Stanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24rt2800: initialize BBP_R82 on all subroutines (except 5592)Stanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24rt2800: initialize BBP_R74 - BBP_R80 on all subroutines (except 5592)Stanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24rt2800: initialize BBP_R70 on all subroutines (except 5592)Stanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24rt2800: initialize BBP_R69 - BBP_R77 on proper subroutinesStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24rt2800: initialize BBP_R68 on proper subroutinesStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24rt2800: initialize BBP_R65 & BBP_R66 on all subroutines (except 5592)Stanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-24rt2800: initialize BBP_R47 on 3352 subroutineStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-27 15:52:18 +0000