summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/rt2x00/rt2800usb.c
AgeCommit message (Collapse)Author
2011-03-29wireless: rt2x00: rt2800usb.c add and identify idsXose Vazquez Perez
taken from staging/rt2860 0x0411,0x016f de37cd49b5a54facef174cf34496919857436e8f MelCo(Buffalo) WLI-UC-G301N 0x050d,0x825b 12840c63b0679f7fab88ea1cc26b52db8b574ce7 Belkin F5D8055 0x050d,0x935a 705059a670f3af2b37695e82de0ee58e75e656ed Belkin F6D4050 v1 0x050d,0x935b 5d92fe3387d086fc2f10426fbdb6b86d6cce5a47 Belkin F6D4050 v2 identifed from ralink driverss 0x0930,0x0a07 RT35xx TOSHIBA 2010_1215_RT3572_Linux_STA_v2.5.0.0.DPO 0x1d4d,0x0011 3072 Pegatron 2011_0107_RT3070_RT3370_Linux_STA_v2.5.0.1_DPO Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-21rt2x00: Add unknown Toshiba devicePeter Lemenkov
Add unknown Toshiba device, mentioned in rt3572sta sources, under CONFIG_RT2800USB_UNKNOWN Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-21rt2x00: Add 2L Central Europe BV 8070Peter Lemenkov
Add 2L Central Europe BV 8070 under CONFIG_RT2800USB_UNKNOWN Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-21rt2x00: Add Planex Communications, Inc. RT8070Peter Lemenkov
Add Planex Communications, Inc. RT8070 under CONFIG_RT2800USB_UNKNOWN Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-21rt2x00: Add rt2870 device idPeter Lemenkov
Add ID for Asus USB-N11 Wi-FI adapter. Tested by me. Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04rt2x00: Optimize TX descriptor handlingHelmut Schaa
HT and no-HT rt2x00 devices use a partly different TX descriptor. Optimize the tx desciptor memory layout by putting the PLCP and HT substructs into a union and introduce a new driver flag to decide which TX desciptor format is used by the device. This saves us the expensive PLCP calculation fOr HT devices and the HT descriptor setup on no-HT devices. Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-31rt2x00: Fix WPA TKIP Michael MIC failures.Gertjan van Wingerde
As reported and found by Johannes Stezenbach: rt2800{pci,usb} do not report the Michael MIC in RXed frames, but do check the Michael MIC in hardware. Therefore we have to report to mac80211 that the received frame does not include the Michael MIC. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-31rt2x00: Remove STATE_RADIO_IRQ_OFF_ISR and STATE_RADIO_IRQ_ON_ISRHelmut Schaa
Remove STATE_RADIO_IRQ_OFF_ISR and STATE_RADIO_IRQ_ON_ISR as they are not used anymore. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-31rt2x00: Refactor beacon code to make use of start- and stop_queueHelmut Schaa
This patch allows to dynamically remove beaconing interfaces without shutting beaconing down on all interfaces. The only place to start and stop beaconing are now the start- and stop_queue callbacks. Hence, we can remove some register writes during interface bring up (config_intf) and only write the correct sync mode to the register there. When multiple beaconing interfaces are present we should enable beaconing as soon as mac80211 enables beaconing on at least one of them. The beacon queue gets stopped when the last beaconing interface was stopped by mac80211. Therefore, introduce another interface counter to keep track ot the number of enabled beaconing interfaces and start or stop the beacon queue accordingly. To allow single interfaces to stop beaconing, add a new driver callback clear_beacon to clear a single interface's beacon without affecting the other interfaces. Don't overload the clear_entry callback for clearing beacons as that would introduce additional overhead (check for each TX queue) into the clear_entry callback which is used on the drivers TX/RX hotpaths. Furthermore, the write beacon callback doesn't need to enable beaconing anymore but since beaconing should be disabled while a new beacon is written or cleared we still disable beacon generation and enable it afterwards again in the driver specific callbacks. However, beacon related interrupts should not be disabled/enabled here, that's solely done from the start- and stop queue callbacks. It would be nice to stop the beacon queue just before the beacon update and enable it afterwards in rt2x00queue itself instead of the current implementation that relies on the driver doing the right thing. However, since start- and stop_queue are mutex protected we cannot use them for atomic beacon updates. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-04rt2x00: Fix panic on frame padding for rt2800 usb devicesIsmael Luceno
Backtrace: rt2800usb_write_tx_data rt2x00queue_write_tx_frame rt2x00mac_tx invoke_tx_handlers __ieee80211_tx ieee80211_tx virt_to_head_page ieee80211_xmit ieee80211_tx_skb ieee80211_scan_work schedule ieee80211_scan_work process_one_work ... It tried to expand the skb past it's end using skb_put. So I replaced it with a call to skb_padto, which takes the issue into account. Signed-off-by: Ismael Luceno <ismael.luceno@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-13rt2x00: Add "flush" queue commandIvo van Doorn
Add a new command to the queue handlers: "flush", this moves the flush() callback from mac80211 into rt2x00queue and adds support for flushing the RX queue as well. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-13rt2x00: Reorganize queue callback functionsIvo van Doorn
As part of the queue refactoring, change the queue callback function names to have 3 different actions: start, kick & stop. We can now also remove the STATE_RADIO_RX_ON/STATE_RADIO_RX_OFF device_state flags, and replace the usage with using the start_queue/stop_queue callback functions. This streamlines the RX queue handling to the similar approach as all other queues. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-13rt2x00: Introduce 3 queue commands in drivers (start, kick, stop).Ivo van Doorn
As part of the queue refactoring, we now introduce 3 queue commands: start, kick, stop. - Start: will enable a queue, for TX this will not mean anything, while for beacons and RX this will update the registers to enable the queue. - Kick: This will kick all pending frames to the hardware. This is needed for the TX queue to push all frames to the HW after the queue has been started - Stop: This will stop the queue in the hardware, and cancel any pending work (So this doesn't mean the queue is empty after a stop!). Move all code from the drivers into the appropriate functions, and link those calls to the old rt2x00lib callback functions (we will fix this later when we refactor the queue control inside rt2x00lib). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-13rt2x00: trivial: add missing \n on warningsJohannes Stezenbach
Signed-off-by: Johannes Stezenbach <js@sig21.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-13rt2x00: Don't frequently reset beacon interval in AdHoc modeHelmut Schaa
Commit 0204464329c17ba6d293e1899f71223599a0e582 "Check for specific changed flags when updating the erp config" changed the way in which a new beacon interval gets handled. However, due to a bug in rt2800usb and rt2800pci the beacon interval was reset during each scan, thus causing problems in AdHoc mode. Fix this by not cleaning up the beacon interval when killing the beacon queue but just prevent the device from sending out beacons. Reported-by: Wolfgang Kufner <wolfgang.kufner@gmail.com> Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-13rt2x00: Implement get_survey callback for rt2800Helmut Schaa
Implement the get_survey callback to allow user space to read statistics about the current channel condition. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-17rt2x00: Fix rt2800 USB TX Path DMA issueRA-Jay Hung
rt2800usb chips need to add 1~3 bytes zero padding after each 802.11 header & payload, and at the end need to add 4 bytes zero padding whether doing TX bulk aggregation or not, TXINFO_W0_USB_DMA_TX_PKT_LEN in TXINFO must include 1-3 bytes padding after 802.11 header & payload but do not include 4 bytes end zero padding. In rt2800usb_get_tx_data_len do not consider multiple of the USB packet size case, sometimes this will cause USB DMA problem. Signed-off-by: RA-Jay Hung <jay_hung@ralinktech.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-17rt2x00: Remove RT30XX Kconfig variables.Gertjan van Wingerde
Enabling of RT30xx devices via Kconfig variables was introduced when these devices weren't properly supported yet. Now that that they are properly supported and functional, we can remove these Kconfig variables for RT30xx devices and simply enable them whenever rt2800pci and/or rt2800usb is enabled. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-17rt2x00: Add initial support for RT3370/RT3390 devices.Gertjan van Wingerde
Modified from Eddy's patch by adding the RT3370 USB support as well. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Eddy Tsai <Eddy_Tsai@ralinktech.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-15rt2x00: Add watchdog functions for HW queueIvo van Doorn
Add watchdog functions for managing the Queues inside the hardware. Normally the driver doesn't have much to do with these queues directly, but the Ralink drivers did implement watchdog functions for these. These watchdog functions are not triggered that often, compared to the other watchdog functions, but I have at least seen them trigger once or twice during a long stresstest run. v2: Add extra documentation for register fields Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-15rt2x00: Remove rt2x00lib_toggle_rxIvo van Doorn
As part of the queue refactoring, the rt2x00lib_toggle_rx can be removed and replaced with the call directly to the set_device_state callback function. We can remove the STATE_RADIO_RX_ON_LINK and STATE_RADIO_RX_OFF_LINK, as it was only used for special behavior inside rt2x00lib rather then the drivers. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-15rt2x00: checkpatch.pl error fixes for rt2800usb.cMark Einon
rt2800usb.c:48: ERROR: do not initialise statics to 0 or NULL Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-15rt2x00: Fix MCU_SLEEP argumentsIvo van Doorn
Legacy driver uses 0xff as the second argument for the MCU_SLEEP command. It is still unknown what the values actually mean, but this will at least keep the command in-sync with the original driver. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-15rt2x00: Implement flush callbackIvo van Doorn
Implement a basic flush callback function, which simply loops over all TX queues and waits until all frames have been transmitted and the status reports have been gathered. At this moment we don't support dropping any frames during the flush, but mac80211 will only send 'false' for this argument anyway, so this is not important at this time. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-15rt2x00: Sync Tx and RX ring sizes with legacy driversHelmut Schaa
All rt2x00 devices used the same Tx and Rx ring size (24 entries) till now. Newer devices (like rt2800) can however make use of a larger TX and RX ring due to 11n capabilities (AMPDUs of size 64 for example). Hence, bring rt2x00 in sync with the legacy drivers and use the same TX and RX ring sizes. Also remove the global defines RX_ENTRIES, TX_ENTRIES, BEACON_ENTRIES and ATIM_ENTRIES and use per driver values. That is 24 entries for rt2400pci, 32 entries for rt2500pci, rt2500usb, rt61pci and rt73usb and 128 (RX) and 64 (TX) for rt2800pci and rt2800usb. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-31rt2x00: Correctly kill beacon queueIvo van Doorn
USB devices upload their beacon and then automatically send it out every beacon interval. However when killing a TX queue we only kill the URB and not the actual transmission of the beacon. This will reset the Beacon register to prevent any beacons from being transmitted. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-31rt2x00: Set PWR_PIN_CFG during initializationIvo van Doorn
Add PWR_PIN_CFG initialization for rt2800usb at the same point as rt2800pci. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-31rt2x00: Add rt2800_wait_csr_readyIvo van Doorn
Similar to rt2800_wait_wpdma_ready() we can add a function to waiting until the CSR is ready. This centralizes some additional code into rt2800lib. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-25rt2x00: Merge rt2800{pci/usb} radio enabling/disabling code to rt2800libIvo van Doorn
The functions rt2800pci_enable_radio and rt2800usb_disable_radio are almost equal and can be merged into rt2800lib. This reduces the number of functions which must be exported from rt2800lib to the drivers at the same time. Also rt2800pci_disable_radio and rt2800usb_disable_radio are almost equal and can be merged into rt2800lib in a similar fashion. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-25rt2x00: Simplify arguments to rt2x00 driver callback functionsIvo van Doorn
write_tx_desc shouldn't pass a rt2x00dev and skb pointer, instead it should use the same format as other TX frame callback functions, which is passing the data_entry pointer which contains all the information which is needed to work on a TX frame. Most callers of the kick_tx_queue and kill_tx_queue already have the data_queue pointer, so rather then sending the QID with the given function, when the driver requests a new pointer to the data_queue, it is more efficient to just send the data_queue pointer directly. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-16rt2x00: Implement TX status reporting for rt2800usbIvo van Doorn
The TX_STA_FIFO register which is used for per-frame TX frame status reporting is also valid on rt2800usb. We can move the rt2800pci_txdone function into rt2800lib where it can also be used by rt2800usb. rt2800usb needs to overwrite the txdone work handler to a different function. Both rt2800usb as rt2800_txdone need to take into account that IO failures can occur while uploading the URB, which means that when obtaining the new entry the IO status must be checked. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-16rt2x00: Request TXWI pointer from driverIvo van Doorn
The only reason why the write_tx_data callback function is needed inside the driver, is because the location of the TXWI descriptor is different on PCI and USB hardware. Except for the beacon, where the TXWI is always at the start of the SKB buffer. In both cases the drivers write_tx_data function only wrap around the function rt2800_write_txwi. Move write_tx_data completely into the rt2800lib library, and add a callback function to obtain the TXWI pointer. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-12rt2x00: Move driver callback functions into the ops structureIvo van Doorn
All callback functions are gathered in rt2x00dev->ops except for the callback functions which are used in rt2800lib to acces rt2800pci/usb. Move the priv pointer from rt2x00dev to rt2x00dev->ops and rename it to drv to make it obvious that it is the driver callback structure. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-12rt2x00: Move common firmware loading into rt2800libIvo van Doorn
Large parts of the firmware initialization are shared between rt2800pci and rt2800usb. Move this code into rt2800lib. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-12rt2x00: Use separate mac80211_ops for rt2800pci and rt2800usbHelmut Schaa
Use separate mac80211_ops for rt2800pci and rt2800usb in preparation for further fixes. This shouldn't introduce functional changes. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-12rt2x00: Convert rt2x00 to use threaded interruptsHelmut Schaa
Use threaded interrupts for all rt2x00 PCI devices. This has several generic advantages: - Reduce the time we spend in hard irq context - Use non-atmic mac80211 functions for rx/tx Furthermore implementing broad- and multicast buffering will be much easier in process context while maintaining low latency and updating the beacon just before transmission (pre tbtt interrupt) can also be done in process context. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-12rt2x00: Implement watchdog monitoringIvo van Doorn
Implement watchdog monitoring for USB devices (PCI support can be added later). This will determine if URBs being uploaded to the hardware are actually returning. Both rt2500usb and rt2800usb have shown that URBs being uploaded can remain hanging without being released by the hardware. By using this watchdog, a queue can be reset when this occurs. For rt2800usb it has been tested that the connection is preserved even though this interruption. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-12rt2x00: Rename CONFIG_DISABLE_LINK_TUNINGIvo van Doorn
Rename CONFIG_DISABLE_LINK_TUNING to DRIVER_SUPPORT_LINK_TUNING Link tuning support is not only based on EEPROM decisions, but also if the device actually supports it. Currently only rt2500usb doesn't support link tuning because of hardware problems. But rt2800usb is also suspected of having problems with link tuning. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-12rt2x00: Convert AGC value from descriptor to RSSI (dBm)Ivo van Doorn
The RSSI values in the RXWI descriptor aren't true RSSI values. Instead they are more like the AGC values similar to rt61pci. And as such, it needs the same conversion before it can be passed to rt2x00lib/mac80211. This requires the struct queue_entry to be passed to rt2800_process_rxwi rather then the skb structure which is contained in the queue_entry. This is required to obtain the lna_gain information from the rt2x00_dev structure. This fixes connection problems when using wpa_supplicant which would try to connect to the worst AP's rather then the best ones. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-30rt2x00: Split of TXWI writing to write_tx_data callback in rt2800usb.Gertjan van Wingerde
Align with the way PCI devices are handled, even though it is not strictly necessary. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-30rt2x00: Merge PCI and USB versions of write_tx_data into single function.Gertjan van Wingerde
Now that rt2x00pci_write_tx_data and rt2x00usb_write_tx_data are similar we can merge them in a single function in rt2x00queue.c. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-15rt2x00: Enable HW crypto by defaultIvo van Doorn
Hardware cryptography seems to be working on a 11G network with WPA/WPA2 cryptography enabled. WEP still needs to be tested... Signed-of-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-03rt2x00: Sync rt2800 MCU boot signal with Ralink driver.Gertjan van Wingerde
Latest versions of the Ralink rt2800 family drivers use 0 as the token value, not 0xff. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
2010-06-03rt2x00: Move PCI/USB specific register initializations to rt2800{pci,usb}.Gertjan van Wingerde
This prevents us having common code depend on PCI or USB specific code. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
2010-06-03rt2x00: Centralize rt2800 beacon writing.Gertjan van Wingerde
The beacon writing functions of rt2800pci and rt2800usb are now identical. Move them to rt2800lib to only have one central function. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
2010-06-03rt2x00: Clean up USB vendor request buffer functions.Gertjan van Wingerde
There is no need to force the separation between a buffer USB vendor request that does fit the CSR cache and one that doesn't onto the callers. This is something that the rt2x00usb_vendor_request_buff function can figure out by itself. Combine the rt2x00usb_vendor_request_buff and rt2x00usb_vendor_request_large_buff functions into a single one, as both of them were equivalent for small buffers anyway. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
2010-06-03rt2x00: Fix rt2800usb TX descriptor writing.Gertjan van Wingerde
The recent changes to skb handling introduced a bug in the rt2800usb TX descriptor writing whereby the length of the USB packet wasn't calculated correctly. Found via code inspection, as the devices themselves didn't seem to mind. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
2010-06-03rt2x00: Properly reserve room for descriptors in skbs.Gertjan van Wingerde
Instead of fiddling with the skb->data pointer and thereby risking out of bounds accesses, properly reserve the space needed in an skb for descriptors. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
2010-06-03rt2x00: Push beacon TX descriptor writing to drivers.Gertjan van Wingerde
Not all the devices require a TX descriptor to be written (i.e. rt2800 device don't require them). Push down the creation of the TX descriptor to the device drivers so that they can decide for themselves whether a TX descriptor is to be created. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
2010-05-26Revert "rt2x00: Fix rt2800usb TX descriptor writing."John W. Linville
This reverts commit 663cb47cc2c5acd32850f67d051e47d62ed199c9. This patch was merged out of the proper order, so instead of fixing a problem with a prior (unmerged) patch, it creates one. Ooops! Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-23 12:15:48 +0000