summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/rt2x00
AgeCommit message (Collapse)Author
2010-06-03rt2x00: Simplify check for external LNA in rt2800_init_rfcsr.Gertjan van Wingerde
Instead of parsing the EEPROM information, use the flag that was set during device initialization. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
2010-06-03rt2x00: Introduce separate interface type for PCI-express.Gertjan van Wingerde
Needed later for PCI-express specific code in rt2800pci. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
2010-06-03rt2x00: Move all register definitions for rt2800 to rt2800.h.Gertjan van Wingerde
There is no point on having them separated across 3 files. At the same time rename USB_CYC_CFG to its proper name US_CYC_CNT (as per the datasheet). Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
2010-06-03rt2x00: Remove RT2870 chipset identification.Gertjan van Wingerde
There is no evidence, either in adapters or in the Ralink code, that such a device actually exists. All so-call RT2870 adapter identify themselves as RT2860. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
2010-06-03rt2x00: Centralize rt2800 beacon writing.Gertjan van Wingerde
The beacon writing functions of rt2800pci and rt2800usb are now identical. Move them to rt2800lib to only have one central function. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
2010-06-03rt2x00: Clean up USB vendor request buffer functions.Gertjan van Wingerde
There is no need to force the separation between a buffer USB vendor request that does fit the CSR cache and one that doesn't onto the callers. This is something that the rt2x00usb_vendor_request_buff function can figure out by itself. Combine the rt2x00usb_vendor_request_buff and rt2x00usb_vendor_request_large_buff functions into a single one, as both of them were equivalent for small buffers anyway. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
2010-06-03rt2x00: Fix rt2800usb TX descriptor writing.Gertjan van Wingerde
The recent changes to skb handling introduced a bug in the rt2800usb TX descriptor writing whereby the length of the USB packet wasn't calculated correctly. Found via code inspection, as the devices themselves didn't seem to mind. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
2010-06-03rt2x00: Properly reserve room for descriptors in skbs.Gertjan van Wingerde
Instead of fiddling with the skb->data pointer and thereby risking out of bounds accesses, properly reserve the space needed in an skb for descriptors. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
2010-06-03rt2x00: Reverse calling order of bus write_tx_desc and driver write_tx_desc.Gertjan van Wingerde
For rt2800 reverse the calling order of rt2x00pci_write_data and rt2800pci_write_data. Currently rt2800pci_write_data calls rt2x00pci_write_data as there can be only 1 driver callback function specified by the driver. Reverse this calling order by introducing a new driver callback function, called write_tx_datadesc, which is called from the bus-specific write_tx_data functions. Preparation for futher cleanups in the skb data handling of rt2x00. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
2010-06-03rt2x00: Push beacon TX descriptor writing to drivers.Gertjan van Wingerde
Not all the devices require a TX descriptor to be written (i.e. rt2800 device don't require them). Push down the creation of the TX descriptor to the device drivers so that they can decide for themselves whether a TX descriptor is to be created. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
2010-06-02wireless: fix several minor description typosWalter Goldens
Signed-off-by: Walter Goldens <goldenstranger@yahoo.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02rt2x00: Move rt2x00debug_dump_frame declaration to rt2x00.h.Gertjan van Wingerde
This allows rt2x00debug_dump_frame to be used from everywhere. This is preparation for beacon writing clean ups. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-26Revert "rt2x00: Fix rt2800usb TX descriptor writing."John W. Linville
This reverts commit 663cb47cc2c5acd32850f67d051e47d62ed199c9. This patch was merged out of the proper order, so instead of fixing a problem with a prior (unmerged) patch, it creates one. Ooops! Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-24rt2x00: Fix rt2800usb TX descriptor writing.Gertjan van Wingerde
The recent changes to skb handling introduced a bug in the rt2800usb TX descriptor writing whereby the length of the USB packet wasn't calculated correctly. Found via code inspection, as the devices themselves didn't seem to mind. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-24rt2x00: Fix failed SLEEP->AWAKE and AWAKE->SLEEP transitions.Gertjan van Wingerde
(Based on a patch created by Ondrej Zary) In some circumstances the Ralink devices do not properly go to sleep or wake up, with timeouts occurring. Fix this by retrying telling the device that it has to wake up or sleep. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-24rt2x00: don't use to_pci_dev in rt2x00pci_uninitializeHelmut Schaa
Don't use to_pci_dev in rt2x00pci_uninitialize to get the allocated irq as it won't work for platform devices (SoC). Instead, use the irq field that's already used everywhere else. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-17drivers/net: remove useless semicolonsJoe Perches
switch and while statements don't need semicolons at end of statement [ Fixup minor conflicts with recent wimax merge... -DaveM ] Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2010-05-17Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
2010-05-14drivers/net: Remove unnecessary returns from void function()sJoe Perches
This patch removes from drivers/net/ all the unnecessary return; statements that precede the last closing brace of void functions. It does not remove the returns that are immediately preceded by a label as gcc doesn't like that. It also does not remove null void functions with return. Done via: $ grep -rP --include=*.[ch] -l "return;\n}" net/ | \ xargs perl -i -e 'local $/ ; while (<>) { s/\n[ \t\n]+return;\n}/\n}/g; print; }' with some cleanups by hand. Compile tested x86 allmodconfig only. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-12rt2x00: In debugfs frame dumping allow the TX descriptor to be part of the skb.Gertjan van Wingerde
Preparation for futher cleanups in the area of properly maintaining the skb data without fiddling with the skb->data pointer. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-12rt2x00: Dump beacons under a different identifier than TX frames.Gertjan van Wingerde
This allows for specific identification of beacons in the debugfs frame stream. Preparation for later differences between dumped TX frames and dumped beacons. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-12rt2x00: Simplify TXD handling of beacons.Gertjan van Wingerde
The handling of tx descriptors for beacons can be simplified by updating write_tx_desc implementations of each driver to write directly to the queue entry descriptor instead of to a provided memory area. This is also a preparation for further clean ups where descriptors are properly reserved in the skb instead of fiddling with the skb data pointer. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-12rt2x00: Re-order tx descriptor writing code in drivers.Gertjan van Wingerde
Where possible, write the tx descriptor words from start to end, to follow a logical ordering of words. Where this is not possible (in rt2400pci, rt2500pci and rt61pci) add a comment as to why word 0 needs to be written last. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-12rt2x00: Fix beacon descriptor writing for rt61pci.Gertjan van Wingerde
The buffer address descriptor word is not part of the TXINFO structure needed for beacons. The current writing of that word for beacons is therefore an out-of-bounds write. Fix this by only writing the buffer address descriptor word for TX queues. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-12rt2x00: Consistently name skb frame descriptor skbdesc.Gertjan van Wingerde
The skb frame descriptor is called everywhere skbdesc, except in one place in rt2x00debug_dump_frame. Change that occurence to have consistent naming. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-11Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/ath/ar9170/main.c
2010-05-10wireless: rt2x00: rt2800usb: replace X by xXose Vazquez Perez
s/X/x Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10rt2x00: Clean up generic procedures on descriptor writing.Gertjan van Wingerde
With a little bit of restructuring it isn't necessary to have special cases in rt2x00queue_write_tx_descriptor for writing the descriptor for beacons. Simply split off the kicking of the TX queue to a separate function with is only called for non-beacons. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10rt2x00: Fix beaconing on rt2800.Gertjan van Wingerde
According to the Ralink vendor driver for rt2800 we don't need a full TXD for a beacon but just a TXWI in front of the actual beacon. Fix the rt2800pci and rt2800usb beaconing code accordingly. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10rt2x00: provide beacon's txdesc to write_beacon callback function.Gertjan van Wingerde
Preparation to fix rt2800 beaconing. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10rt2x00: Clean up all driver's kick_tx_queue callback functions.Gertjan van Wingerde
All of the driver's kick_tx_queue callback functions treat the TX queue for beacons in a special manner. Clean this up by integrating the kicking of the beacon queue into the write_beacon callback function, and let the generic code no longer call the kick_tx_queue callback function when updating the beacon. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10rt2x00: Factor out RXWI processing to common rt2800 code.Gertjan van Wingerde
RXWI processing is exactly the same for rt2800pci and rt2800usb, so make it common code. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10rt2x00: Factor out TXWI writing to common rt2800 code.Gertjan van Wingerde
TXWI writing is exactly the same for rt2800pci and rt2800usb, so make it common code. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10rt2x00: Don't check whether hardware crypto is enabled when reading RXD.Gertjan van Wingerde
We should simply follow what the hardware told us it has done. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10rt2x00: Clean up rt2800usb.h.Gertjan van Wingerde
Remove unused RXD_DESC_SIZE define and remove duplicated RXWI definitions from rt2800.h. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-10rt2x00: Fix setting of txdesc->length field.Gertjan van Wingerde
We should take the stripping of the IV into account for the txdesc->length field. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Tested-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-07rt2x00: rt2800: use correct txop value in tx descriptorHelmut Schaa
rt2800 devices use a different enumeration to specify what IFS values should be used on frame transmission compared to the other rt2x00 devices. Hence, create a new enum called txop that contains the valid values. Furthermore use the appropriate txop values as found in the ralink drivers: - TXOP_BACKOFF for management frames - TXOP_SIFS for subsequent fragments in a burst - TXOP_HTTXOP for all data frames Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-07rt2x00: Fix RF3052 channel initializationIvo van Doorn
Update channel initialization for the RF3052 chipset. According to the Ralink drivers, the rt3x array must be used for this chipset, rather then the rt2x array. Furthermore RF3052 supports the 5GHz band, extend the rt3x array with the 5GHz channels, and use them for the RF3052 chip. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-07rt2x00: rt2800: don't overwrite SIFS values on erp changesHelmut Schaa
The SIFS value is a constant and doesn't need to be updated on erp changes. Furthermore the code used 10us for both, the OFDM SIFS and CCK SIFS time which broke CTS protected 11g connections (see patch "rt2x00: rt2800: update initial SIFS values" for details). Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-07rt2x00: rt2800: update initial SIFS valuesHelmut Schaa
Currently the CCK and OFDM SIFS value is set to 32us. This value is neither used by the Ralink driver nor specified in 802.11. Instead of using 10us for CCK SIFS (as defined in 802.11) use 16us like in the Ralink drivers. And indeed using a SIFS value of 10us breaks connectivity with 11g + CTS protected connections. Add a comment to the code why we don't use 10us for CCK SIFS value. The OFDM SIFS value is set to 16us (as defined in 802.11 and also used by the Ralink drivers). Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-05Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/libertas_tf/cmd.c drivers/net/wireless/libertas_tf/main.c
2010-05-04rt2x00: Register frame length in TX entry descriptor instead of L2PAD.Gertjan van Wingerde
And use it consistently in the chipset drivers. Preparation for further clean ups. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-04rt2x00: Fix HT40+/HT40- setting in rt2800.Gertjan van Wingerde
Inspection of the Ralink vendor driver shows that the TX_BAND_CFG register and BBP register 3 are about HT40- indication, not about HT40+ indication. Inverse the meaning of these fields in the code. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-04rt2x00: Enable RT30xx by default.Gertjan van Wingerde
Now that RT30xx support is at the same level as RT28xx support we can enable these devices by default. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-04rt2x00: Remove rt2x00pci.h include from rt2800lib.Gertjan van Wingerde
PCI specific code has been remove quite some time ago. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-03wireless: rt2x00: rt2800usb: be in sync with latest windows drivers.Xose Vazquez Perez
0x07d1,0x3c17 D-Link Wireless N 150 USB Adapter DWA-125 0x1b75,0x3071 Ovislink Airlive WN-301USB 0x1d4d,0x0011 Pegatron Ralink RT3072 802.11b/g/n Wireless Lan USB Device 0x083a,0xf511 Arcadyan 802.11 USB Wireless LAN Card 0x13d3,0x3322 AzureWave 802.11 n/g/b USB Wireless LAN Card Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-03rt2x00: remove now unused noise field from struct rxdone_entry_descJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
2010-04-28rt2x00: rt2800lib: update rfcsr & bbp init code for SoC devicesHelmut Schaa
Update the rfcsr and bbp init code for SoC devices to match with the latest Ralink driver. To have better control over which values are used for the register initialization create a new function rt2800_is_305x_soc which checks for SoC interface type, the correct RT chipset and the correct RF chipset. This is based on the assumption that all rt305x SoC devices use a rt2872 and rf3020/rf3021/rf3022. In case an unknown RF chipset is found on a SoC device with a rt2872 don't treat it as rt305x and just print a message. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-28rt2x00: remove usage of deprecated noise valueJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-29 22:44:20 +0000