summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2014-05-22ath9k: Handle multiple keys while setting tx filtersRajkumar Manoharan
The keycache index is used to abort transmission for given station when it goes to sleep state. But the commit "ath9k_hw: Abort transmission for sleeping station" is not handling multi-key station. Fix that. Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22mwifiex: update seq number correctly for packets from TDLS peerAvinash Patil
This patch adds handling of updating rx sequence number for packets received from TDLS peer. Current implementation of mwifiex_queueing_ra_based assumes station would always receive packets from AP which is not true in case of TDLS. Fix this by adding this case. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22mwifiex: set TDLS flags for AMSDU packetsAvinash Patil
This patch fixes an issue where AMSDU packets for TDLS link would flow over infra link. This happened because we were missing setting TDLS flag in TxPD on AMSDU packets. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22mwifiex: delete TDLS link upon Teardown eventAvinash Patil
If userspace application does not take care of TDLS teardown event, TDLS link would be present in driver database and thus driver would send such packets on direct link while peer has already severed link causing data traffic failure. Disable TDLS link upon teardown event so as to ensure this does not happen. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22mwifiex: silence TDLS link delete failure for nonexistent linkAvinash Patil
If TDLS link delete command fails because of non-existent peer or TDLS peer is absent from driver's entry, it means link was already deleted. In such case print debug messages with lower severity. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22mwifiex: avoid TDLS check for packets destined to APAvinash Patil
In station role if TDLS is supported, we traverse TDLS peer list to see if packet's destination address matches with TDLS peer. Packets destined to AP are not sent over TDLS link and hence avoid this list traversal for such packets. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22ath9k: fix build error with disabled debugZefir Kurtisi
DFS pulse interval printing is only available when CONFIG_ATH9K_DEBUGFS is set. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22b43: N-PHY: add missing calib values for radio 0x2026 rev 11Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22b43: fix list of 5 GHz channels for 802.11n cardsRafał Miłecki
Broadcom hardware uses a bit tricky hw_value-s for 5 GHz channels, values 184-228 are used for 4920-5140 MHz center frequencies. Normally you expect channels 7-16 (e.g. 5060 MHz is channel 12, not 212). We never meant to register hw_value 228 with freq 6140 MHz (5000 + 228 * 5). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22b43: fix typo in define name for 2 GHz channels (s/CHAN4G/CHAN2G/)Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22libertas: fix return value when processing invalid packetDan Williams
Nothing actually uses the return value yet, but we might as well make it correct, like process_rxed_802_11_packet() does for the same case. Also ensure that if monitor mode is enabled (and thus process_rxed_802_11_packet() is called) that the debugging enter/leave functions are balanced. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22rt2x00: Endless loop on hub port power downRichard Genoud
I've met an endless (or at least very long) loop if I power down the usb port on witch a usb wifi key is plugged. (Ok, it's not very smart to power down a usb port when a usb key is in used... but still, I think that should not lead to an endless loop). I have a lot of: ieee80211 phy1: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0438 with error -71 (-71==-EPROTO) How to reproduce: - plug an usb wifi key - ip link set wlan0 up - hub-ctrl -b usb_bus -d usb_device -P usb_port -p 0 hub-ctrl source: https://github.com/codazoda/hub-ctrl.c/blob/master/hub-ctrl.c The following patch prevents the endless loop, but I'm really not sure that The Right Way To Do It (R) Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22carl9170: fix leaks at failure path in carl9170_usb_probe()Alexey Khoroshilov
carl9170_usb_probe() does not handle request_firmware_nowait() failure that leads to several leaks in this case. The patch adds all required deallocations. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2014-05-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-nextJohn W. Linville
2014-05-22Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
2014-05-22ath10k: support get/set antenna configurations.Ben Greear
Verified that target's tx/rx chain register is set appropriately, and that the tx rate goes down as number of chains decrease, but I did not actually try to verify antenna ceased to transmit when disabled. kvalo: move ar->supp_*_chainmask initialisation to ath10k_mac_register() Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Avery Pennarun <apenwarr@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-05-22iwlwifi: mvm: remove vif argument from power_update_macArik Nemtsov
The power update function looks at all current vifs to determine the power policy. It doesn't use the current vif. Instead the value was overwritten and used internally. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-22iwlwifi: mvm: make iwl_mvm_update_beacon_abort staticEmmanuel Grumbach
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-22iwlwifi: mvm: remove debugfs hook for reduced tx powerEmmanuel Grumbach
This was not used is unlikely to be used, just kill it. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-22iwlwifi: mvm: disable reduced Tx power when not applicableEmmanuel Grumbach
I forgot to disable the reduced Tx power in a few paths. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-21iwlwifi: mvm: pass force_assoc_off all the way down to avoid hacksLuciano Coelho
In some cases, we need to force the association to be off in the MAC_CONTEXT_CMD command we send to the firmware. Instead of having to hack the vif->bss_conf.assoc value, pass it all the way down the call chain. Additionally, for the iwl_mvm_mac_ctxt_add() case, we *always* set forced_assoc_off to true, so we can remove the hack in the d3 code that was forcing it to off by hacking the bss_conf.assoc value. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-21iwlwifi: mvm: don't filter out the first beaconAvri Altman
Enabling beacon filtering should be done only after a beacon has been received. Doing that too early will cause disconnections. This has already been fixed, but the fix didn't take care about the case where the beacon is received after the association, it waited only for association which is not enough. Signed-off-by: Avri Altman <avri.altman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-21Merge remote-tracking branch 'iwlwifi-fixes/master' into iwlwifi-nextEmmanuel Grumbach
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Conflicts: drivers/net/wireless/iwlwifi/mvm/mac80211.c
2014-05-21iwlwifi: mvm: disable beacon filteringEmmanuel Grumbach
This feature has been causing trouble - disable it for now. Cc: <stable@vger.kernel.org> [3.13+] Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-20ath9k: fixup "ath9k_htc: fix build with disabled debug"John W. Linville
Apparently Oleksij's compile testing was no better than mine initially was... :-( Cc: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-20b43: xmit: set 5 GHz bit depending on current bandRafał Miłecki
PHYs other than A may also work in 5 GHz mode. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-20ath9k_htc: fix build with disabled debugOleksij Rempel
CC [M] drivers/net/wireless/ath/ath9k/htc_drv_txrx.o drivers/net/wireless/ath/ath9k/htc_drv_txrx.c: In function ‘ath9k_rx_prepare’: drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:1006:2: warning: passing argument 2 of ‘ath9k_htc_err_stat_rx’ from incompatible pointer type [enabled by default] ath9k_htc_err_stat_rx(priv, &rx_stats); ^ In file included from drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:17:0: drivers/net/wireless/ath/ath9k/htc.h:380:20: note: expected ‘struct ath_htc_rx_status *’ but argument is of type ‘struct ath_rx_status *’ static inline void ath9k_htc_err_stat_rx(struct ath9k_htc_priv *priv, Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-20b43: add more devices to the bands databaseRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-20b43: move bands detection to a separated functionRafał Miłecki
This cleans code a bit and allows adding support for more devices. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-19brcmsmac: make return of 0 explicitJulia Lawall
Delete unnecessary local variable whose value is always 0 and that hides the fact that the result is always 0. A simplified version of the semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ local idexpression ret; expression e; position p; @@ -ret = 0; ... when != ret = e return - ret + 0 ; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> [arend@broadcom.com: make brcms_b_detach() a void function] Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-19ath9k_hw: Abort transmission for sleeping stationRajkumar Manoharan
The data transmission to the power save station should be aborted immediately, whenever the station informs sleep state. Right now the frames queued into into hardware are being transmitted until the hardware detects the power save station based excessive retries of the data frames due to unacknowlegdement. Then remaining frames are returned with filetered status and might be retried later by driver or mac80211. Per WFA certification testing, AP should not send out more than two frames after processing nullfunc with PM bit set from associated station. To speed up tx filtering, the pending frames in hardware queues for given station will be aborted immediately via tx filter registers. This transmit filters can be ignored if the descriptor is having invalid destination index or clear destination mask set. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-19b43: make B43_PCMCIA and B43_SDIO depend on B43_SSBRafał Miłecki
These are extra configs specific to the SSB. Lack of this dependency and CONFIG_B43=y CONFIG_B43_BUSES_BCMA=y CONFIG_SSB=m would result in: > drivers/built-in.o: In function `b43_sdio_remove': > sdio.c:(.text+0x14657f): undefined reference to `ssb_bus_unregister' > drivers/built-in.o: In function `b43_sdio_probe': > sdio.c:(.text+0x14672f): undefined reference to `ssb_bus_sdiobus_register' Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-19b43: rework band switchingRafał Miłecki
We always operate on one core and simple band switch doesn't require full core reset. Simply reset the PHY. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-19b43: complete PHY resetRafał Miłecki
Use separated function for taking PHY out of reset and implement reset for BCMA. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-19b43: move PHY reset code into PHY specific fileRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-19b43: split upload of init values into 2 functionsRafał Miłecki
There are two groups of init values. The first one has to be uploaded once per wireless core reset but the second one on every band switch. To implement band switching in an optimal way allow uploading band init values only (by using a separated function). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-19rtlwifi: remove unused allow_all_destaddr functionsPeter Wu
Unused as configure_filter takes care of setting/clearing RCR_AAP. In commit "rtlwifi: rtl8723be: rtl8723com: Remove unused allow_all_destaddr functions", Larry Finger removed allow_all_destaddr from the struct. This commit removes the related function too. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-19cfg80211: constify wowlan/coalesce mask/pattern pointersJohannes Berg
This requires changing the nl80211 parsing code a bit to use intermediate pointers for the allocation, but clarifies the API towards the drivers. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-19cfg80211: constify more pointers in the cfg80211 APIJohannes Berg
This also propagates through the drivers. The orinoco driver uses the cfg80211 API structs for internal bookkeeping, and so needs a (void *) cast that removes the const - but that's OK because it allocates those pointers. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-19cfg80211: constify MAC addresses in cfg80211 opsJohannes Berg
This propagates through all the drivers and mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-05-19iwlwifi: mvm: set the MAC_FILTER_IN_BEACON flag also for P2PLuciano Coelho
There doesn't seem to be a good reason for not enabling the MAC_FILTER_IN_BEACON flag for P2P client, as we do for station. This can prevent potential, hard-to-reproduce problems during association. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-19iwlwifi: mvm: enable MAC_FILTER_IN_BEACON when forced_assoc_off is setLuciano Coelho
Set the MAC_FILTER_IN_BEACON flag in iwl_mvm_mac_ctxt_cmd_sata() also when forced_assoc_off is set, so it's aligned with when we are not associated. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-19iwlwifi: mvm: don't allow diversity if BT Coex / TT forbid itEmmanuel Grumbach
We should not allow diversity when BT Coex needs the second antenna. Thermal Throttling can also request to stop using the second antenna. Honour those requests. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-19iwlwifi: mvm: Remove redundant initializationAvri Altman
This value is being set few lines under in set_cqm_params. Signed-off-by: Avri Altman <avri.altman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-19iwlwifi: mvm: update power after phy_ctxt is NULL when unassigning chanctxLuciano Coelho
iwl_mvm_power_update_mac() (more specifically iwl_mvm_power_iterator()) relies on the phy_ctxt setting to decide whether the vif is active or not. When unassigning a chanctx, we should therefore call iwl_mvm_power_update_mac() after setting phy_chanctx to NULL. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-16wlcore: Remove trailing semicolon from do {...} while (0) macroJoe Perches
These should not have trailing semicolons so remove them. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-16mwifiex: set valid tx_param during mwifiex_send_null_packetAvinash Patil
While sending null packet from driver we are passing NULL tx_param pointer to indicate there are no more packets in queue. PCIe send routine assumes caller has done sanity check on tx_param and may cause crash while dereferencing next_pkt_len from tx_param. Avoid this by passing tx_param structure with next_pkt_len as zero instead of NULL pointer. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-16mwifiex: restore current SDIO write port in failure casesAvinash Patil
During SDIO MP aggregation, we at first acquire current write port to write data onto and then proceed with using this port for SDIO write. If error occurs later in mwifiex_write_data_sync because device is suspended or SDIO write failure, we do not restore current write port and write bitmap. This results into leaking one port and hole in SDIO write port bitmap. Restore current write port and reset bitmap accordingly in failure cases to avoid this. Reported-by: James Cameron <quozl@laptop.org> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Reviewed-by: James Cameron <quozl@laptop.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-16ath: add JP DFS pattern detectorJanusz Dziedzic
Add initial values for JP DFS pattern detector. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-21 01:32:03 +0000