summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2014-05-13ath9k: non-functional: calculate DFS pulse interval per-wiphyZefir Kurtisi
Systems with multiple DFS channel detectors need to track timestamp of previous pulse per instance to display the correct pulse interval. Since the interval value is used for debug printing only, this is a non-functional modification. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13amend "ath9k: Allow platform override without EEPROM override"Helmut Schaa
Originally Helmut posted a v2 of the "ath9k: Allow platform override without EEPROM override", but I had prematurely commited the original as commit 552a515707a. This commit restores the tree to what Helmut intended with his v2 submission. -- JWL Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13rtlwifi: rtl8723be: add msi module parameterAdam Lee
The msi module parameter offers an option to enable or disable MSI interrupts mode, for debugging and workaround(in case) convenience. Signed-off-by: Adam Lee <adam.lee@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13rtlwifi: rtl8188ee: add msi module parameterAdam Lee
The msi module parameter offers an option to enable or disable MSI interrupts mode. For now, some users report RTL8188EE works only with MSI on their certain platforms, some others report it works only without MSI, this parameter will help. Signed-off-by: Adam Lee <adam.lee@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13rtlwifi: make MSI support a module parameterAdam Lee
This makes MSI support a module parameter, for debugging and workaround convenience. Signed-off-by: Adam Lee <adam.lee@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13wl1251: only call ieee80211_beacon_loss in managed modeGrazvydas Ignotas
ieee80211_beacon_loss() is only to be called in managed mode, but the firmware may send the sync timeout event at any time, so do a check before calling. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13wl1251: fix mixed up args for joinGrazvydas Ignotas
The join arguments are mixed up, passing beacon_interval instead of channel and channel instead of beacon_interval. Fix them. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13wl1251: fix null data for IBSSGrazvydas Ignotas
Fix the WARN below by not calling ieee80211_nullfunc_get() in IBSS mode, but setting up empty template the same way wl12xx driver does. WARNING: CPU: 0 PID: 914 at net/mac80211/tx.c:2750 ieee80211_nullfunc_get+0xc0/0xd0 [mac80211]() Modules linked in: wl1251_sdio wl1251 mac80211 cfg80211 ... [<c00439c0>] (warn_slowpath_null) [<bf0bdfdc>] (ieee80211_nullfunc_get [mac80211]) [<bf134774>] (wl1251_op_bss_info_changed [wl1251]) [<bf099e14>] (ieee80211_bss_info_change_notify [mac80211]) ... Also perform join command regardless of bss_type as that seems to be required for proper operation. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13Revert "wl1251: enforce changed hw encryption support on monitor state change"Grazvydas Ignotas
This reverts commit b90a1165a72fabdc260abaa9eeadcbfd29e267eb. That commit (or rather, hack) triggers a scary WARN in IBSS (ad-hoc) mode. Steps to reproduce: ifconfig wlan0 down iwconfig wlan0 mode ad-hoc ifconfig wlan0 up ------------[ cut here ]------------ WARNING: CPU: 0 PID: 905 at kernel/workqueue.c:1400 __queue_work+0x21c/0x2f4() Modules linked in: wl1251_sdio wl1251 mac80211 cfg80211 CPU: 0 PID: 905 Comm: ifconfig Not tainted 3.15.0-rc2#233 [<c0015f38>] (unwind_backtrace) from [<c0012938>] [<c0012938>] (show_stack) from [<c05d4034>] [<c05d4034>] (dump_stack) from [<c0043984>] [<c0043984>] (warn_slowpath_common) from [<c00439c0>] [<c00439c0>] (warn_slowpath_null) from [<c005b6c8>] [<c005b6c8>] (__queue_work) from [<c005b820>] [<c005b820>] (queue_work_on) from [<bf134ac0>] [<bf134ac0>] (wl1251_op_config [wl1251]) [<bf099a70>] (ieee80211_hw_config [mac80211]) ... This happens because ieee80211_connection_loss() is not expected to be called in IBSS mode (mac80211 ends up queuing uninitialized work in that case). Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-05-13Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
2014-05-13iwlwifi: mvm: enable RX chain diversity if neededJohannes Berg
In some situations (see comment) it makes sense to enable both chains (if available) to get better throughput by having chain diversity available. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-13iwlwifi: mvm: prevent sched scan while not idleDavid Spinadel
Prevent sched scan while not idle (including during association or in AP mode) instead of while associated only. This fixes my previous commit which was incomplete: commit bd5e4744a6ca64299b57a2682c720d00a475a734 Author: David Spinadel <david.spinadel@intel.com> Date: Thu Apr 24 13:15:29 2014 +0300 iwlwifi: mvm: do no sched scan while associated Currently the FW doesn't support sched scan while associated, Prevent it. Signed-off-by: David Spinadel <david.spinadel@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-13iwlwifi: mvm: fix off-by-one in scan channels configurationEliad Peller
tail should be equal to the last valid index, so decrease it by one. This error causes in "a gap" in some cases (as well as some possible out-of-bound write), finally resulting in ucode assertion. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-13iwlwifi: mvm: revisit the NVM handling codeEran Harary
Fix a bug in nvm_read_section function if size of the section is a multiple of 2K: - if the size of the section is *not* multiple of 2K, then we will have: read(2K) - return 2K ... read(2K) - return 2K read(2K) - return the rest (in bytes) and exit the while loop. - else, if the size of the section is a multiple of 2K, then we have: read(2K) - return 2K read(2K) - return 2K read(2K) - return 2K read(2K) - return 0 and exit the while with an error. We should not return an error in the latter case, because it might well be that the section was completely read. Also, we try now to read all the sections as this is needed for new devices. Signed-off-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-13iwlwifi: mvm: BT Coex - fix boost register / LUT valuesEmmanuel Grumbach
These values are used to give preference to WiFi according to a certain pattern. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-13iwlwifi: mvm: set SKIP_OVER_DTIM flag only if neededEliad Peller
setting SKIP_OVER_DTIM when skip_dtim_periods is 0 causes a ucode assert. set the flag only if needed. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-13iwlwifi: pcie: disable BHs in iwl_pcie_txq_check_wrptrsEmmanuel Grumbach
This fixes: ================================= [ INFO: inconsistent lock state ] 3.14.3+ #5 Tainted: G O --------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. swapper/3/0 [HC0[0]:SC1[3]:HE1:SE0] takes: (&(&txq->lock)->rlock){+.?...}, at: [<ffffffffa059803c>] iwl_pcie_enqueue_hcmd+0x12c/0x1000 [iwlwifi] {SOFTIRQ-ON-W} state was registered at: [<ffffffff810d9071>] __lock_acquire+0x5f1/0x13b0 [<ffffffff810d9ee0>] lock_acquire+0xb0/0x1f0 [<ffffffff817ef80e>] _raw_spin_lock+0x3e/0x80 [<ffffffffa0598f7a>] iwl_pcie_txq_check_wrptrs+0x6a/0xb0 [iwlwifi] [<ffffffffa0594b5a>] iwl_pcie_irq_handler+0xdba/0x2670 [iwlwifi] [<ffffffff810ef1e0>] irq_thread_fn+0x20/0x50 [<ffffffff810ef77f>] irq_thread+0x11f/0x150 [<ffffffff810a04f0>] kthread+0xf0/0x110 [<ffffffff817fa4bc>] ret_from_fork+0x7c/0xb0 irq event stamp: 1142192 hardirqs last enabled at (1142192): [<ffffffff817efb6c>] _raw_spin_unlock_irq+0x2c/0x40 hardirqs last disabled at (1142191): [<ffffffff817ef9ef>] _raw_spin_lock_irq+0x1f/0x80 softirqs last enabled at (1142188): [<ffffffff81079082>] _local_bh_enable+0x22/0x50 softirqs last disabled at (1142189): [<ffffffff8107ad35>] irq_exit+0xe5/0xf0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&txq->lock)->rlock); <Interrupt> lock(&(&txq->lock)->rlock); Fixes: ea68f46070c7 ("iwlwifi: pcie: clarify TX queue need_update handling") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-13iwlwifi: use dev_printk instead of dev_dbg for debug logsLiad Kaufman
When calling IWL_DEBUG_*() dev_dbg() is currently used, and this could result in the log being ignored no matter the internal loglevel, since dev_dbg() may get turned on or off based on the dynamic debug mechanism. Replace the dev_dbg() with dev_printk() since dynamic printing is pointless as we use our own debug level mechanism and there is just a single dev_dbg() call in the code. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> [rephrase commit message a bit] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-13iwlwifi: remove CMD_SYNCEmmanuel Grumbach
CMD_SYNC is really 0 which is confusing: if (cmd.flags & CMD_SYNC) is always false. Fix this by simply removing its definition. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-13Merge remote-tracking branch 'iwlwifi-fixes/master' into HEADEmmanuel Grumbach
2014-05-12mmc: drop the speed mode of card's stateSeungwon Jeon
Timing mode identifier has same role and can take the place of speed mode. This change removes all related speed mode. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-12brcmfmac: Fix iovar 'bw_cap' set command failureDaniel Kim
Fix iovar 'bw_cap' set command failure introduced by commit ff3b0fba6f25555ef59c55d138a467d0f81d82d7 Author: Arend van Spriel <arend@broadcom.com> Date: Sat Mar 15 12:00:57 2014 +0100 brcmfmac: fallback to mimo_bw_cap for older firmwares This resulted in disabling 20MHz operation in the firmware. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Daniel Kim <dekim@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/altera/altera_sgdma.c net/netlink/af_netlink.c net/sched/cls_api.c net/sched/sch_api.c The netlink conflict dealt with moving to netlink_capable() and netlink_ns_capable() in the 'net' tree vs. supporting 'tc' operations in non-init namespaces. These were simple transformations from netlink_capable to netlink_ns_capable. The Altera driver conflict was simply code removal overlapping some void pointer cast cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-11iwlwifi: remove spurious newline in KconfigJohannes Berg
There's an extra newline that shouldn't be there - remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-11iwlwifi: cause build error on missing newlineJohannes Berg
If a (debug) message is missing a newline, cause build error so we don't keep reintroducing this problem. This also prevents using a non-constant argument as the format string which is a good idea anyway (e.g. for security reasons.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-11iwlwifi: mvm: Disable uAPSD for a DCM clientAvri Altman
A binding object associates virtual MACs to a Phy. Binding object can ask (and get) air time, thus allowing several MACs to share the medium. A binding object can be in either one of 3 states: 1) standalone - A single active MAC 2) Different Channel Mode (DCM) - There are 2 active MACs or more (not necessarily just clients), but each has its own channel. 3) Same Channel Mode (SCM) - There are 2 active MACs or more (not necessarily just clients), that share the same channel. This patch introduces an additional condition for enabling uAPSD: uAPSD should be disabled for a client in DCM. The reason for that is a low latency issue in Miracast. Signed-off-by: Avri Altman <avri.altman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-11iwlwifi: mvm: Add power management support for P2P DCMAvri Altman
If two clients are active while each one is alone on its channel, and the applicable flags are set, power management should be enabled. This condition is referred to as Different Channel Mode (DCM). Up to now, in DCM power management was supported only on BSS. This patch adds support for P2P power management in DCM as well. Signed-off-by: Avri Altman <avri.altman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-11iwlwifi: mvm: fix setting channel in monitor modeEmmanuel Grumbach
There was a deadlock in monitor mode when we were setting the channel if the channel was not 1. ====================================================== [ INFO: possible circular locking dependency detected ] 3.14.3 #4 Not tainted ------------------------------------------------------- iw/3323 is trying to acquire lock: (&local->chanctx_mtx){+.+.+.}, at: [<ffffffffa062e2f2>] ieee80211_vif_release_channel+0x42/0xb0 [mac80211] but task is already holding lock: (&local->iflist_mtx){+.+...}, at: [<ffffffffa0609e0a>] ieee80211_set_monitor_channel+0x5a/0x1b0 [mac80211] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&local->iflist_mtx){+.+...}: [<ffffffff810d95bb>] __lock_acquire+0xb3b/0x13b0 [<ffffffff810d9ee0>] lock_acquire+0xb0/0x1f0 [<ffffffff817eb9c8>] mutex_lock_nested+0x78/0x4f0 [<ffffffffa06225cf>] ieee80211_iterate_active_interfaces+0x2f/0x60 [mac80211] [<ffffffffa0518189>] iwl_mvm_recalc_multicast+0x49/0xa0 [iwlmvm] [<ffffffffa051822e>] iwl_mvm_configure_filter+0x4e/0x70 [iwlmvm] [<ffffffffa05e6d43>] ieee80211_configure_filter+0x153/0x5f0 [mac80211] [<ffffffffa05e71f5>] ieee80211_reconfig_filter+0x15/0x20 [mac80211] [snip] -> #1 (&mvm->mutex){+.+.+.}: [<ffffffff810d95bb>] __lock_acquire+0xb3b/0x13b0 [<ffffffff810d9ee0>] lock_acquire+0xb0/0x1f0 [<ffffffff817eb9c8>] mutex_lock_nested+0x78/0x4f0 [<ffffffffa0517246>] iwl_mvm_add_chanctx+0x56/0xe0 [iwlmvm] [<ffffffffa062ca1e>] ieee80211_new_chanctx+0x13e/0x410 [mac80211] [<ffffffffa062d953>] ieee80211_vif_use_channel+0x1c3/0x5a0 [mac80211] [<ffffffffa06035ab>] ieee80211_add_virtual_monitor+0x1ab/0x6b0 [mac80211] [<ffffffffa06052ea>] ieee80211_do_open+0xe6a/0x15a0 [mac80211] [<ffffffffa0605a79>] ieee80211_open+0x59/0x60 [mac80211] [snip] -> #0 (&local->chanctx_mtx){+.+.+.}: [<ffffffff810d6cb7>] check_prevs_add+0x977/0x980 [<ffffffff810d95bb>] __lock_acquire+0xb3b/0x13b0 [<ffffffff810d9ee0>] lock_acquire+0xb0/0x1f0 [<ffffffff817eb9c8>] mutex_lock_nested+0x78/0x4f0 [<ffffffffa062e2f2>] ieee80211_vif_release_channel+0x42/0xb0 [mac80211] [<ffffffffa0609ec3>] ieee80211_set_monitor_channel+0x113/0x1b0 [mac80211] [<ffffffffa058fb37>] cfg80211_set_monitor_channel+0x77/0x2b0 [cfg80211] [<ffffffffa056e0b2>] __nl80211_set_channel+0x122/0x140 [cfg80211] [<ffffffffa0581374>] nl80211_set_wiphy+0x284/0xaf0 [cfg80211] [snip] other info that might help us debug this: Chain exists of: &local->chanctx_mtx --> &mvm->mutex --> &local->iflist_mtx Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&local->iflist_mtx); lock(&mvm->mutex); lock(&local->iflist_mtx); lock(&local->chanctx_mtx); *** DEADLOCK *** This deadlock actually occurs: INFO: task iw:3323 blocked for more than 120 seconds. Not tainted 3.14.3 #4 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. iw D ffff8800c8afcd80 4192 3323 3322 0x00000000 ffff880078fdb7e0 0000000000000046 ffff8800c8afcd80 ffff880078fdbfd8 00000000001d5540 00000000001d5540 ffff8801141b0000 ffff8800c8afcd80 ffff880078ff9e38 ffff880078ff9e38 ffff880078ff9e40 0000000000000246 Call Trace: [<ffffffff817ea841>] schedule_preempt_disabled+0x31/0x80 [<ffffffff817ebaed>] mutex_lock_nested+0x19d/0x4f0 [<ffffffffa06225cf>] ? ieee80211_iterate_active_interfaces+0x2f/0x60 [mac80211] [<ffffffffa06225cf>] ? ieee80211_iterate_active_interfaces+0x2f/0x60 [mac80211] [<ffffffffa052a680>] ? iwl_mvm_power_mac_update_mode+0xc0/0xc0 [iwlmvm] [<ffffffffa06225cf>] ieee80211_iterate_active_interfaces+0x2f/0x60 [mac80211] [<ffffffffa0529357>] _iwl_mvm_power_update_binding+0x27/0x80 [iwlmvm] [<ffffffffa0516eb1>] iwl_mvm_unassign_vif_chanctx+0x81/0xc0 [iwlmvm] [<ffffffffa062d3ff>] __ieee80211_vif_release_channel+0xdf/0x470 [mac80211] [<ffffffffa062e2fa>] ieee80211_vif_release_channel+0x4a/0xb0 [mac80211] [<ffffffffa0609ec3>] ieee80211_set_monitor_channel+0x113/0x1b0 [mac80211] [<ffffffffa058fb37>] cfg80211_set_monitor_channel+0x77/0x2b0 [cfg80211] [<ffffffffa056e0b2>] __nl80211_set_channel+0x122/0x140 [cfg80211] [<ffffffffa0581374>] nl80211_set_wiphy+0x284/0xaf0 [cfg80211] This fixes https://bugzilla.kernel.org/show_bug.cgi?id=75541 Cc: <stable@vger.kernel.org> [3.13+] Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-11iwlwifi: mvm: stop sched scan before associationDavid Spinadel
Stop sched scan on bss_info_changed if !idle to avoid sched scan during association. Signed-off-by: David Spinadel <david.spinadel@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-11iwlwifi: mvm: notify sched scan complete from stop routineDavid Spinadel
Add an option to notify mac80211 about sched scan complete from iwl_mvm_stop_sched_scan(), to enable this notification when the stop was called from within the driver. Signed-off-by: David Spinadel <david.spinadel@intel.com> Reviewed-by: Alexander Bondar <alexander.bondar@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-11iwlwifi: mvm: add channel 14 to the low band listEran Harary
in family 8000: additional channel 14 added to the low band list. now the number of channels in the low band is 15. Signed-off-by: Eran Harary <eran.harary@intel.com> Reviewed-by: Dor Shaish <dor.shaish@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-11iwlwifi: pcie: try to get ownership several timesEmmanuel Grumbach
Some races with the hardware can happen when we take ownership of the device. Don't give up after the first try. Cc: <stable@vger.kernel.org> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-11iwlwifi: 8000: add default NVM file name in family 8000Eran Harary
The 8000 family products need a file on the file system which is used as NVM. This file is a must, if no filename is supplied as module parameter, use a default filename. Signed-off-by: Eran Harary <eran.harary@intel.com> Reviewed-by: Dor Shaish <dor.shaish@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-11iwlwifi: dvm: don't use _ni mac80211's callbacksEmmanuel Grumbach
This is not needed since the PCIe layer disables the bottom halves before it calls the op_mode. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-11iwlwifi: add missing trailing newlines to debug messagesJohannes Berg
All messages should have a trailing newline, add all the missing ones. Also make all messages constants, replacing the single one that pointlessly used a variable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-08Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2014-05-08Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
2014-05-07rtl8187: make CTS-to-self protection workAndrea Merello
CTS protection was not working properly because the HW needs RTS flag to be asserted, and it need also RTS duration field to be filled with CTS-to-self duration. This patch makes the driver to do this. Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-07rtl8180: make CTS-to-self protection workAndrea Merello
CTS protection was not working properly because the HW still need RTS flag to be asserted, and it need also RTS rate field to be set with CTS-to-self rate and RTS duration field to be filled with CTS-to-self duration. This patch makes the driver to do this. Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-07rtl8180: report mac80211 short preamble RX flagAndrea Merello
This patch make it possible to mac80211 to know whether a frame has been received with short preamble. It simply checks for the "splcp" flag in the RX status descriptor, and eventually set RX_FLAG_SHORTPRE in mac80211 rx status structure. Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-07rtl8187: report mac80211 short preamble RX flagAndrea Merello
This patch make it possible to mac80211 to know whether a frame has been received with short preamble. It simply checks for the "splcp" flag in the RX status descriptor, and eventually set RX_FLAG_SHORTPRE in mac80211 rx status structure. Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-07ath9k: Allow platform override without EEPROM overrideHelmut Schaa
Add a new platform data flag "use_eeprom" that indicates that the eeprom found on the card itself should be used instead of the one present in the platform data. This allows to override the MAC address of a PCI card while preserving the eeprom data from the card itself. The default behavior is preserved. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-07mwifiex: add HT operation IE in TDLS setup confirmAvinash Patil
This patch adds support to populate HT operatation IE in TDLS setup confirm command. This is required for setting wider bandwidths for TDLS operations. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-07mwifiex: disable TDLS link upon tear down eventAvinash Patil
This patch adds code to disable TDLS link upon reception of TDLS teardown event from peer. Teardown event can happen either because of TDLS teardown packet from peer or internal timeout configured during TDLS setup. Event is propogated to cfg80211 so that userspace application can take appropriate action. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-07mwifiex: configure inactivity timeout for TDLS linkAvinash Patil
This patch adds configuration timeout for TDLS link. This is configuered at the time of TDLS link configuration. If TDLS link is inactive for more than timeout, FW will tear this link. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-07iwlwifi: pcie: disable interrupts upon PCIe allocEmmanuel Grumbach
In case RFKILL is in KILL position, the NIC will issue an interrupt straight away. This interrupt won't be sent because it is masked in the hardware. But if our interrupt service routine is called for another reason (SHARED_IRQ), then we'll look at the interrupt cause and service it. This can cause bad things if we are not ready yet. Explicitly clean the interrupt cause register to make sure we won't service anything before we are ready to. Cc: <stable@vger.kernel.org> [3.14] Reported-and-tested-by: Alexander Monakov <amonakov@gmail.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-07iwlwifi: mvm: rs: enable MCS9 for TxEyal Shapira
After fixes to the rs algorithm reenable MCS9. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-06iwlwifi: mvm: fix sparse warning when _DEBUGFS isn't setEmmanuel Grumbach
Since the declaration of iwl_mvm_fw_error_rxf_dump and iwl_mvm_fw_error_sram_dump is under ifdef CONFIG_IWLWIFI_DEBUGFS, do the same for their implementation. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-05-06iwlwifi: mvm: implement mac80211's flush callbackEmmanuel Grumbach
This allows mac80211 to flush the Tx queues before it sends critical management frames. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-23 06:54:29 +0000