summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2013-04-08mac80211_hwsim: advertise VHT support also when channels == 1Karl Beldan
Drivers can now advertise VHT support even if they don't use channel contexts. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/nfc/microread/mei.c net/netfilter/nfnetlink_queue_core.c Pull in 'net' to get Eric Biederman's AF_UNIX fix, upon which some cleanups are going to go on-top. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-07net: wireless: p54spi: use spi_get_drvdata() and spi_set_drvdata()Jingoo Han
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-07net: wireless: wl1251: use spi_get_drvdata() and spi_set_drvdata()Jingoo Han
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-03iwlwifi: mvm: rename iwl_mvm_new_bt_coex_notifEmmanuel Grumbach
It actually handles a BT coex notification, so rename it to be more self explained. Also, this function can always look at mvm->last_bt_notif provided that the latter is updated on time. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03iwlwifi: mvm: clean up invalid station handlingEmmanuel Grumbach
Using IWL_MVM_STATION_COUNT and IWL_INVALID_STATION together isn't a good idea as they have different values. Always use IWL_MVM_STATION_COUNT for an invalid station in MVM and move the definition of the IWL_INVALID_STATION constant into the DVM driver to avoid making such mistakes again. The one use in the transport code can be hard-coded to -1 instead as the station ID is passed as an integer there. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03iwlwifi: add new pci id for 6x35 seriesShuduo Sang
some new thinkpad laptops use intel chip with new pci id need be added lspci -vnn output: Network controller [0280]: Intel Corporation Centrino Advanced-N 6235 [8086:088f] (rev 24) Subsystem: Intel Corporation Device [8086:5260] Signed-off-by: Shuduo Sang <sangshuduo@gmail.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03iwlwifi: mvm: beautify code in BT CoexEmmanuel Grumbach
The iterators don't need to know what bt_kill_msk means. All they need to know is if reduced Tx power is enabled on an interface or not. So change the member of the iterator to be a bool. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03iwlwifi: mvm: Sync FW API time event notification changeIlan Peer
The firmware API changed to differentiate between event and fragment start/end. Change the time-event handling accordingly. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03iwlwifi: sleep for at least 10 secondsJohannes Berg
Many platforms have issues processing a wakeup signal while they're still suspending, and will ignore it. Since our device thinks it woke the platform, and the platform ignored the signal, it will sleep without WoWLAN being enabled as the device disables WoWLAN when having woken the platform. Resolve this by making the device wait for 10 seconds after getting the suspend signal before waking up the platform. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03iwlwifi: print opmode when firmware is loadedJohannes Berg
Print the sub-driver (opmode, i.e. DVM or MVM) when the firmware is loaded. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03iwlwifi: mvm: remove redundant iwl_power_get_params()Alexander Bondar
The function just wraps an existing one, remove it. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03iwlwifi: mvm: change active-to-powersave transition time for BPSAlexander Bondar
The requirement for TX/RX active to powersave transition time for the Balanced Power Save (BPS) scheme changed. Change the driver accordingly and set transition time to 100 msec. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03iwlwifi: mvm: encapsulate power table command log messageAlexander Bondar
Encapsulate the power table command logging in a separate function to print the same information in both cases. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03iwlwifi: mvm: set keepalive period regardless of PM stateAlexander Bondar
The firmware starts sending nulldata frames for keepalive immediately after association, regardless of power management state. The driver thus needs to configure keep alive period unconditionally. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03iwlwifi: mvm: always send power table commandAlexander Bondar
The driver distinguishes between power management and device's power down enablement. Power management enablement depends both on driver's module power parameters and mac80211 decision. The device's power down depends only on driver's module power parameters. Change the driver to always send Power Table command to enable or disable both power management and device's power down. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03iwlwifi: mvm: Fix active-to-powersave transition time unitsAlexander Bondar
Active to power save mode transition time for TX/RX in the power table command is in microseconds, fix the units in the driver. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03iwlwifi: mvm: don't disable power management due to P2P deviceAlexander Bondar
Currently power management is supported only when only a single virtual interface is present. The driver verifies number of created interfaces and disables power management when multiple interfaces present. However, this rule does not extend to a P2P device that is handled differently in the firmware. If a P2P device is added power management can remain enabled. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03iwlwifi: mvm: Rename some power management definitions and methodsAlexander Bondar
Replace SLEEP_OVER_DTIM by SKIP_OVER_DTIM. Add iwl_mvm prefix to a function name. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03iwlwifi: mvm: downgrade to old power management APIAlexander Bondar
Current available FW still doesn't support new PM API. Therefore, to enable basic power management with the existing firmware, change the API in the driver back to the API used in the current firmware. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03iwlwifi: mvm: remove BT Coex constraints upon roaming to A bandEmmanuel Grumbach
When we roam to A band, we don't need to constraint WiFi any more since it is operating on a different band. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03iwlwifi: mvm: implement reduced Tx powerEmmanuel Grumbach
This allows to have better wifi TPT when BT is active under good RSSI conditions. Wifi will have better chance to send Acks and Cts even if BT is active. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03iwlwifi: mvm: add per-interface debugfs with mac_params fileJohannes Berg
Use the per-interface debugfs infrastructure to create a directory and symlink, and add a file containing debug data related to each virtual interface. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03brcmfmac: enable sk_buff queueing when credits depleteArend van Spriel
Firmware provides the driver with credits used to transmit packets to the firmware. When credits run out the packets should be queued and dequeued when receiving creditback signals from the firmware. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: no flow-control tlv signals when fcmode is NONEArend van Spriel
The fcmode provided by module parameter defaults to NONE, which means no flow-control is required. In this case flow-control signals should not be enabled. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: only allocate firmware-signalling resources if requiredArend van Spriel
Bail out of brcmf_fws_init() when no firmware-signalling is asked for. Need to take this into account in brcmf_fws_deinit() as well. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: move brcmf_fws_{de,}init() functionsArend van Spriel
The functions are moved in preparation of later patches. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: correct specified length from FIFOCREDITBACK signalArend van Spriel
The length is not according specification so better fix it. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: initialize struct brcmf_fws_info fields before iovarArend van Spriel
If iovar to the firmware fails the firmware-signalling module does a cleanup for which it needs pointer to struct brcmf_pub, which it gets from struct brcmf_fws_info::drvr. Assign this field before doing the tlv iovar. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: add dedicated log level for low-level sdio debuggingArend van Spriel
The low-level sdio code has a large number of trace and info messages that are mostly useful looking into bus specific issues. For tracing higher-level driver functions it is better to have a dedicated level for low-level sdio debugging. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Change-Id: Ia424ff18d9033b97aeffc248358e50c51805e815 Reviewed-on: http://lb-bun-88.bun.broadcom.com:8080/74 Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: avoid error output on header only packetPiotr Haber
During SDIO layer flow control signalling firmware can issue invalid packets. Prevent printing of parsing errors in such case. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: avoid error output in receive pathArend van Spriel
Parsing the tlv upon receiving frames can fail. Instead of printing an error message, just count the parse failure. On some devices we receive a lot of invalid tlv signals. this commit will be squashed. Signed-off-by: Arend van Spriel <arend@broadcom.com> Change-Id: I08e0f62c55e5028f9aa70c396d291679abd273c9 Reviewed-on: http://lb-bun-88.bun.broadcom.com:8080/72 Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: fix handling sk_buff cleanup upon bus tx failureArend van Spriel
When firmware-signalling is active the brcmf_txcomplete() does a free of the sk_buff when transfer to firmware fails in the bus-specific driver code. However, it should also cleanup the packet from the hanger. This patch fixes that. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: enable tx status signallingArend van Spriel
Enabling the tx status signalling, which requires packet tagging before sending to the firmware and handling the tx status signal. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: add flow-control mode to firmware signallingArend van Spriel
Upcoming patches will add firmware signalled flow control. Prepare by adding the mode, which defaults to disable it. The mode can be queried by brcmf_fws_fc_active() and set by a module parameter. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: add optional bus callback definition for tx queue cleanupArend van Spriel
Add a callback to obtain packet queue from the bus-specific code used to cleanup packet buffers from firmware-signalling code. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: add firmware-signalling hanger functionsArend van Spriel
The hanger for firmware-signalling is used to retain information for outstanding transmit packets that await tx status. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: perform filtered firmware-signalling cleanup upon DEL_IFArend van Spriel
When an interface is deleted make sure to cleanup all packet buffers related to that interface. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: add definitions for handling sk_buff control buffer dataArend van Spriel
The sk_buff structure contains a control buffer that can be used by different layers in the networking stack for holding packet associated information. In brcmfmac it is used to hold firmware signalling related information. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: allow stopping netif queue for different reasonsArend van Spriel
Currently, the netif queue is only stopped when the bus interface is giving a push back. This will change soon so prepare the driver by adding a stop reason and stop/resume the queue accordingly. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: add firmware-signalling cleanup functionArend van Spriel
Add a cleanup function releasing any queued packet buffers in the mac descriptor entries. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Piotr Haber <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: add handler for credit map firmware eventsArend van Spriel
The firmware signalling functionality needs the credit map firmware events. This patch adds registration of a handler for this event. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: handle firmware signal for updating mac descriptor infoArend van Spriel
Firmware can signal the driver to allocate descriptor info for a given mac address, which will be used for flow control and host queueing. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: hookup firmware signalling to firmware interface eventsArend van Spriel
Firmware signalling needs to handle resources upon interface events. This patch add calls in the interface event handling routine. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: determine the wiphy->bands property correctly.Hante Meuleman
Use information from the device to determine the bands property of the wiphy object. After this change the support of 80211n is correctly presented in the bands property. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: use skb_cow() in brcmf_sdbrcm_txpkt() to assure alignmentArend van Spriel
In brcmf_sdbrcm_txpkt() a new packet is allocated and used to transmit to firmware freeing up the original packet. However, that packet is still referenced in firmware-signalling so this would result in a double free. Using skb_cow() avoids this as the packet reference is unchanged. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: minor optimization of brcmf_sdbrcm_txpkt() functionArend van Spriel
When taking care of packet alignment to 64-byte boundary padding may be added between SDPCM header and CDC data. It clear both SDPCM header space and padding space. Changed it to only clear padding space. In filling the SDPCM header it uses unaligned access to set SDPCM software header, but preceding code assures it is properly aligned. Signed-off-by: Arend van Spriel <arend@broadcom.com> Change-Id: Iad22f277f3496440ba4d2db771205714774570ac Reviewed-on: http://lb-bun-88.bun.broadcom.com:8080/76 Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: correct success flag passed by brcmf_sdbrcm_txpkt()Arend van Spriel
The function brcmf_sdbrcm_txpkt() calls brcmf_txcomplete() with a parameter success. For this parameter it passes ret != 0, but that condition is true upon failure. Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03rtlwifi: rtl8188ee: Fix wrong header patchChen, Chien-Chia
This patch is to fix some wrong header file path. It has caused the build failed. Signed-off-by: Chen, Chien-Chia <machen@suse.com> Cc: larry.finger@lwfinger.net Cc: zhiyuan_yang@realsil.com.cn Cc: page_he@realsil.com.cn Cc: mmarek@suse.cz Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03rt2x00: rt2x00pci: fix build error on Ralink RT3x5x SoCsGabor Juhos
The rt2800pci driver supports the built-in wireless MAC of the Ralink RT3x5x SoCs. However building the driver for these SoCs leads to the following error: LD init/built-in.o drivers/built-in.o: In function `rt2800pci_rxdone_tasklet': <...>/drivers/net/wireless/rt2x00/rt2800pci.c:1012: undefined reference to `rt2x00pci_rxdone' drivers/built-in.o:(.rodata+0x4780): undefined reference to `rt2x00pci_initialize' drivers/built-in.o:(.rodata+0x4784): undefined reference to `rt2x00pci_uninitialize' drivers/built-in.o:(.rodata+0x47bc): undefined reference to `rt2x00pci_flush_queue' drivers/built-in.o:(.rodata+0x4818): undefined reference to `rt2x00pci_regbusy_read' make[5]: *** [vmlinux] Error 1 The missing functions are provided by the rt2x00pci module. This module is only selected by the rt2800pci driver if PCI support is enabled in the kernel, because some parts of the rt2x00pci code depends on PCI support. PCI support is not available on the RT3x5x SoCs because those have no PCI host controller at all. Move the non PCI specific code from rt2x00pci into a separate module. This makes it possible to use that code even if PCI support is disabled. The affected functions are used by all of the rt2x00 PCI drivers so select the new module for those drivers. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-08-01 00:12:55 +0000